Related
Changes for 1.1.1:
-Fix issues with being unable to reconnect after a disconnect -- no more needing to reboot after a disconnect
-Fix issue where the check box needed to connect to another device would not show up sometimes
-Fixed a blank toast message that was trying to report a disconnect, now shows a proper error message
-Updated boot logo to one with the teamwin text
1.1.1 is currently only being released as a patch to apply on top of an existing 1.0.0 install.
If you are already running 1.0.0, simply install the update zip. No wiping is needed for the update.
If you don't have my ROM installed right now, you will need to factory reset, install both the 1.0.0 zip followed by the 1.1.1 zip.
There is only one update zip for all models.
We need someone who has a 1GB/8GB/2100MHz model to contact us and supply a boot image from this model of device so that we can offer a properly working boot.img.
Mirror 1
Mirror 2
What this ROM does not have:
-Gestures for back and menu do not work out of he box (there's an Xposed module that you can install to enable them that is free in the Play Store or another app that does not need Xposed documented further down in this post)
-Status bar does not hide itself
-Home + Power does not take a screenshot (Xposed can add screenshot options to the power menu)
-No companion mode that lets you receive calls, texts -- use SWApp Link free in the Play Store for this
-AGPS assistance data doesn't download by default. Use GPS Status and Toolbox to download it instead. GPS is confirmed working.
-Camera is rotated 90 degrees
-If you open the camera app and press the button to use the non-existant front facing camera, the app will FC. You will have to clear app data on the camera app to use the camera again.
-Many APNs are not included. You might have to add yours manually. This is a tethering ROM, not intended to be used with a SIM card.
-Some of the numbers on the stock dialer are not accessible - may be able to fix this with xposed and change the app's dpi.
What this ROM does have that stock Omate does not:
-Fully working native Bluetooth tethering to your phone including push notifications
-Fully working settings app including the ability to delete and change account settings
-Already has EnSec and build prop tweaks
-SuperSU
This is built using some MTK 6572 source for a different device. As such some things will be a lot different and that is the reason that items like the gestures for back and menu do not work.
You do not have to start with a stock ROM. This ROM will completely replace your existing system and boot/kernel.
Download the correct zip for your device. If you don't see your model listed, contact us and DO NOT install:
Mirror 1
Mirror 2
Install TWRP if you haven't and make a backup of your existing System, Data, and Boot
Factory reset
Install zip and reboot. First boot will take longer than usual
On first boot you will see the Welcome screen. Tap in the 4 corners of the app itself (not including the status bar) in a clockwise fashion (see here).
On your phone, turn on Bluetooth, enable Bluetooth tethering, and make your phone visible for pairing
On the watch, open settings. If you don't have a SIM card in the watch, go to more and check the box for airplane mode.
Turn on Bluetooth, find and pair with your phone.
Click on the Settings icon to the right of your phone's name (this is on the watch) Tap on Internet access.
Enjoy!
You will probably want to install Xposed:
You'll probably want to download All in one gestures from the Play Store.
Open Xposed Installer in app drawer, tap on Frameworks. Tap Install/Update. Grant root rights.
Still in Xposed, hit Ok after the install is done. Press the back button (icon in the upper left will also go back). Click on Modules. Check the box for GravityBox and All in one gestures (and probably any other modules).
Still in Xposed, hit back, Frameworks. Scroll down and reboot. Click Okay.
After reboot, open app drawer and find GravityBox, scroll down to Power tweaks. Check the top box for Advanced reboot menu and the box for Screenshot.
Open the All in one gestures app. Tap on the Swipe tab. Enable it. Scroll down to Left Area and tap on it. Choose Menu. Scroll down and tap on Right Area and choose Back.
Click on the All in one gestures icon in the upper left to slide open the menu. Tap on Transparency & Color. Slide the second slider all the way to the left to get rid of the glowing icons on the left and right.
You now have screen shot capability and have restored the stock gestures.
Press and hold power. Press Reboot. Press Reboot. Press OK.
Other recommended apps:
PNF or Push Notifications Fixer - You can use this app to change the frequency that the watch pings Google. When your phone changes connections (e.g. mobile network to Wi-Fi) the framework notifies all apps including apps like Hangouts that the connection has changed so that those apps can reconnect and get push notifications. Unfortunately your phone will not tell your watch when connections change. This app will help you start getting push notifications sooner after a connection change.
GMD Gesture Control - The free version can add a back button gesture. You'll have to buy the paid version to get the menu gesture back.
If you install Xposed framework, you can install this free module called All in one gestures and tweak it to enable gestures for the back and menu buttons.
Notes:
Bluetooth tethering had to be slowed down quite a bit to prevent the driver from crashing. We've slowed it down by setting the tcp buffer sizes really low. You can change the values of net.tcp.buffersize.bt to tweak it if you like. The crash seems to be kernel level or maybe even chip / hardware level.
Bluetooth on MTK is somewhat unstable. If it disconnects due to a driver crash, you may have to reboot the device to get Bluetooth working again. With version 1.1.1, you can probably just reconnect without having to reboot.
I am very busy. I probably won't have time to provide much support for this ROM. I don't owe you anything. If you don't like this ROM, I'll refund your full purchase price of free.
Special thanks to @Lokifish Marz @AdamOutler @toastcfh and @kuronosan
Reserved
Omg! It works great!
Word up!
Sent from my Galaxy Nexus using Tapatalk 2
Awesomesauce!
Dees!!! Ur da man!
hahahahahahah
eat dat MTK!
ROFL
Exactly where do I install the zip drive and do I extract it to the same folder as bt-rom?
syounger64 said:
Exactly where do I install the zip drive and do I extract it to the same folder as bt-rom?
Click to expand...
Click to collapse
don't extract it.
move it into the watch. boot in recovery mode and install zip.
make sure you have a backup of your system if things go sour.
ALWAYS BACKUP BEFORE DOING ANYTHING!!!
Can anybody please tell me what is the bettary life if i use it moderately ?
Sent from my SM-N9005 using XDA Premium 4 mobile app
juanflight said:
don't extract it.
move it into the watch. boot in recovery mode and install zip.
make sure you have a backup of your system if things go sour.
ALWAYS BACKUP BEFORE DOING ANYTHING!!!
Click to expand...
Click to collapse
Thanks but after installing goomanager. It says denied supers request. How do I fix that? How do u boot in recovery mode if my power button isn't doing anything when I press it? When I want to back up of my system is that done via goomanager or supersu?
Sorry for all these questions as I'm not familiar with this process.
Dees_Troy said:
I don't owe you anything. If you don't like this ROM, I'll refund your full purchase price of free.
Click to expand...
Click to collapse
Haha, love it!
You are a great dev Dees. It's people like you that make this place what it is, a haven for tech lovers. Great job!
First thing I did was install myglass app and try and connect it to glass and it still crashes. Oh well hopefully we are going to get something good out of the source release. Thanks Dee's for all you do.
Sigh.... after reading this I got up to install the patch. The watch slipped off my wrist and fell on the floor. The metal clamp came off but I was able to put it back on then found out the power button wasn't working. I don't know if it was the result of the fall but while I was looking at supersu I might have hit on something and the watch rebooted then got stuck until the battery drained out. Is it possible that the power button was disabled?
WOW, so I get mt watches on a Thursday and the best ROM yet comes out on Friday? I couldn't be more excited .. Awesome!
Not that I wont be installing this , just a quick question.. @Dees_Troy what version on the standard android mail client is included in this rom? I havent been able to get my watch logged into exchange. this is a big deal for me as I need to calendar to sync my appointments. Email and contacts from exchange on my watch are not that big a deal for me but the appointments are. Thanks and looking forward to checking out your efforts..
I use gravitybox to enable the navigation bar @60% on stock rom, but can't get it enabled with this rom. is it completely pulled from the framework or is there some other trick to enable the navbar?
Installation aborted
While attempting to install this ROM, I keep receiving the 'Installation aborted' message in recovery. I'm running Loki's setup on my 1/8/1900mhz Omate. Also, when I plug my watch in to my laptop with USB debugging mode on I cannot execute any adb command prompts.
I don't know if the two are related...but I'm sure it is something I screwed up.
Any thoughts?
After install I am having apn issues. On Loki's operative I can get H+ data but only Edge with this. Any suggestions? GoPhone APN settings are correct and have also tried the Att one too.
Everything else seems great so far. Testing BT with Glass next. Will update the post afterwards.
edit#1- I can successfully pair Glass as a headset and also bluetooth tether data. MyGlass does not force close but will not connect when it sees the device.
edit#2- APN settings are borked for HSPA+....
unable to use for internet access
when i check the box to enable internet access, nothing happens.
I am using 1/8/1900 TS
Cheers! This makes some libraries like AllJoyn works!
H3ll0w0rld08 said:
when i check the box to enable internet access, nothing happens.
I am using 1/8/1900 TS
Click to expand...
Click to collapse
samething happens on mine!
For No Lock Home v0.6.4 for Android 4.4.x see the content:
No Lock Home is Xposed module for lockscreen bypass based on network connectivity - when you're home, connected to your trusted WiFi AP, lock screen will not be shown (or you can set it up to display Swipe to unlock lockscreen). Once you disconnect from your AP, your default secured lockscreen will be displayed.
It's the very same principle as uses app SkipLock (formerly Unlock With WiFi) or it can be achieved using Tasker with Secure Settings. You can also try SmartLockScreen.
Similar functionality is also partialy integrated into Android 5.0.
So why use No Lock Home instead?
It works with any unlock method (Swipe/Face Unlock/Pattern/PIN/Password/...) - including fingerprint reader on Samsung Galaxy S5 (stock ROM w/ TouchWiz)
It's easy to setup (compared to complexity of Tasker). No Lock Home only requires you to enable module, reboot and add AP MAC address (using just two taps)
It's completely Free
Next to the built-in unlocking in Android 5.0, using No Lock Home is the fastest and most efficient solution (because it integrates itself directly into the system keyguard)
Additional advantages:
Unlock based on connected WiFi networks, Bluetooth devices or Cell towers
No service, no wakelock, no internet connectivity - just a few method hooks within system keyguard
Crazy small apk
Using AOSP methods which are also available in Samsung/LG devices as well as CyanogenMod
Limitations
Xposed required (therefore root required)
Version 0.x is for Android 4.4.x/KitKat only (no 5.0 Lollipop)
As seen on XDATV...
...and other tubes
It has been tested on Android 4.4.2-4 - Samsung Galaxy S5 (stock & CM11), LG G Pad 8.3 (stock & CM11), Samsung Galaxy Tab P1000 (CM11). Since version 0.5.3 it's also compatible with OnePlus and HTC so all Android (4.4+) phones should be covered.
Download
No Lock Home is also available from Xposed Module Repository (QR code below) and Google play.
Do you like it? Does it save your time? Want more features? Buy me a macaron.
Changelog
Code:
v0.6.4 (20141030)
- add option to exclude swipe unlock when connected to wifi network
- fix re-enabling swipe lockscreen upon connect to trusted network if screen is off
- fix swipe fix not loading its setting
v0.6.3 (20141026)
- add option to fix swipe (some CM roms)
- fix sim pin during airplane mode switching
- fix automatic unlock on boot on devices without sim card or phone module
v0.6.2 (20141020)
- fix BT/WiFi locking triggered by disconnects in untrusted environment
v0.6.1 (20141019) - experimental
- fix BT locking was active even when not enabled by user
- remove unnecessary unlock attempts (causing unlock sounds)
v0.6.0 (20141018) - experimental
- improve wake up speed (by removing any onScreenTurnedOn hook and making it fully event driven)
- improve SIM PIN detection (using onSimStateChanged hook)
- improve BTS unlock, now event driven (on the fly locking/unlocking, no more checks on screen on)
v0.5.4 (20141011)
- additional sim pin check
v0.5.3 (20140918)
- improved "no lock when screen is on"
- improvements towards htc keyguard compatability
v0.5.2 (20140916) - experimental
- add add (action for adding mac addresses/bts)
- add use of "*" wildcard (in bts only) as a workaround to have No Lock Home always active
- fix "no lock when screen is on"
v0.5.1 (20140911) - experimental
- add OnePlus One keyguard support
v0.5.0 (20140910) - experimental
- add lock/unlock based on network (wifi/bt) events - screen no longer needs to be turned off and on, it also bypasses the first lockscreen after boot
- minor tweaks
v0.4.0 (20140725) - current stable
- add cdma support
- fix ripple/particle effect instead of fallback circle when using swipe (non-aosp devices)
v0.3.7 (20140709)
- add option to unlock using any paired & connected bluetooth device
- add allow using both wifi mac addresses and names (ssid)
- fix sim unlock not appearing when using swipe
v0.3.6 (20140708)
- add option to unlock using any wifi connection
- fix lock not activated in some cases if using swipe, thanks @albertf
v0.3.5 (20140707)
- add option to disable/enable (un)locking
- add restart-less setting
- fix status bar in swipe lock, thanks @JulianPaoloThiry
v0.3.0 (20140706)
- add unlock based on Bluetooth device
- add unlock based on cell tower (LAC-CID)
- fix respecting lock delay
- fix faster screen on outside trusted zone (remove unnecessary wifi checks)
v0.2.0 (20140703)
- add option to set Swipe unlock method as default instead of None
v0.1.1 (20140702)
- fix FC (first time opening settings without wifi on)
v0.1.0 (20140629)
- Initial release
No Lock Home v2.0 is Xposed module for Android 5.x/6.0. It's core functionality is based on TrustManagerService from GravityBox implementation. Just like with the KitKat version of No Lock Home, this solution has benefits like no background running service or best compatibility with various unlock methods.
Advantages of this module (reasons for spin off):
GravityBox is designed for AOSP so using it even for WiFi unlock alone on CyanogenMod breaks some CM features.
No Lock Home offers additional features: using AP MAC addresses, skipping first unlock after device boot, unlocking on any WiFi network, cell tower (BTS) unlock
Additional notes
CyanogenMod profiles alone offer lockscreen settings but it's impossible to configure it for both WiFi and BT (using it with Google's Smart Lock for BT is somehow buggy)
Using No Lock Home for WiFi and Google's Smart Lock for BT work just fine therefore this No Lock Home doesn't duplicate such functionality
Download: Xposed repo or Play Store
Changelog
Code:
v2.2.0 (20170920) beta
- Add option to change state of Wifi based on BTS
v2.1.0 (20160710)
- Add option to skip swipe
v2.0.1 (20151118)
- Add Android 6.0 support
v2.0.0 (20150822)
- v2 release
Does it works with 4.1.2?
Inviato dal mio GT-I9100 utilizzando Tapatalk
Great concept. Is there any way to add extra WiFi connections
Sent from my GT-I9300 using XDA Premium 4 mobile app
Trying now. Promises to be a great convenience for my clumsy fingers!
More WFI hotspots? Might team up with wifi scheduler app.
Great app. I'll start using now. Suggestions for future releases:
- Set a list of more Trusted MACs (with name for identification). EDIT: Just saw how to do it, but a more friendly UI is always appreciated.
- Option to set which type of lockscreen we want (No lockscreen at all/normal lockscreen)
- App icon on launcher
Keep up the great work.
MaKTaiL said:
- Option to set which type of lockscreen we want (No lockscreen at all/normal lockscreen)
Click to expand...
Click to collapse
Agreed, it'd be super cool if you could choose to have a secure lockscreen when off a saved AP and an unsecured/swipe lockscreen when connected to a saved one.
awesome. using it on my rooted nexus 5.
more than one AP would be cool and no lock while connected to bt carkit would be nice.
I used a tasker profile for that, but if home was pressed, lockscreen showed up regardless
Great app
Really great App !!! But it doesn't work on my N4 4.4.4 - stock rooted...
Install App + checked it in Xposed-> rebooted -> checked my MAC -> rebooted.... still nothing.
I use Pattern lock.
What am I doing wrong ?
Thank you
Ok. Works!
Working cool at Nexus5.
Enabling multiple hotspots would be good, and to make it through SSID instead of MAC. Also with BT carkit audio
works well on Moto G with 4.4.3
moneytoo said:
No Lock Home is Xposed module for lockscreen bypass based on network connectivity - when you're home, connected to your trusted WiFi AP, lock screen will not be shown. Once you disconnect from your AP, your selected lockscreen will be displayed. ...
Click to expand...
Click to collapse
Crashed when click to the module on stock nexus5 4.4.4 (with xposed framework running)
Great great great! Have been looking for such app for a long time, now finally one that does it well. Thank you!
Also looking forward to the disable lock by Bluetooth function. It will be very convenient to have it when out of home but in some relatively secure place, such as in the car.
Works perfectly on Galaxy Tab Pro on Android 4.4.2.
Thanks!!
MaKTaiL said:
- Set a list of more Trusted MACs (with name for identification). EDIT: Just saw how to do it.
Click to expand...
Click to collapse
How do I set this list? I can't figure it out.
Didn't work. HTC M8 :/
ilyadan said:
How do I set this list? I can't figure it out.
Click to expand...
Click to collapse
Use semicolons ( ; ) after each MAC address on the field.
Good app, working well. I wish better interface for editing the macs list, including small name with indication of active mac.
Thanks.
Works fine on my stock rom 4.4.4 nexus 4. Thank you!
Working great on galaxy note 2 4.4.2
**** THIS PROJECT IS NO LONGER MAINTAINED ****
Niwatori changes the display position of apps. The target device is a smartphone that has about 5-inch display because the purpose is one-handed operation.
Thanks to rovo89, I can use this on Lollipop!
Niwatori provides three one-handed modes:
- Movable Screen
- Slide Down
- Small Screen.
They work temporary, NOT permanent.
**
Niwatori was my local version of Flying Android. I released Niwatori since Xposed framework supports Android 5.0 Lollipop.
Differences:
- Abolished FA Toggle, pin, flying dialog and notification shortcut features.
- Control the window only from shortcuts.
- Move the status bar and the dialogs in the same way as the apps.
**
Compatibility
NIWATORI CONFLICTS WITH OTHER MULTIWINDOW AND ONE-HANDED SYSTEM.
I test on Nexus 4 with Stock ROM. Niwatori should work on Nexus devices running Stock. And I support CyanogenMod if Niwatori works with small special code for CM.
Usage
Create shortcut for one-handed mode by Niwatori on sub-launcher , such as Pie control.
[MY USAGE 1] Navigation Bar and Gravity Box
Use shortcuts:
Movable Screen
Pin
[MY USAGE 2] LMT Launcher's Pie
Use shortcuts:
Small Screen
Swap Left/Right
Expand notifications with extra action (Small Screen)
Testing (v0.4.5)
[DEV] Nexus 4, Android 5.1.1
Nexus 9. Android 6.0.0
Download
Xposed Module Repository
Google Play for Premium Settings
Translation
Volunteers are welcome to translate text (strings) to your language.
Download strings and edit two files:
- strings.xml
- strings_activity_settings.xml
And send them to me Note that text encoding of android is UTF-8.
If possible, place them in your language folder. ('values-ja' for Japanese, 'values-ru' for Russian, etc.)
Troubleshooting
Turn on "Log Actions" in niwatori's settings and call a shortcut for one-handed mode. Then Xposed framework logs as follow.
Code:
04-21 08:25:47.553 24125-24125/? I/Xposed﹕ jp.tkgktyk.xposed.niwatori.intent.action.SMALL_SCREEN
04-21 08:25:47.556 24125-24125/? I/Xposed﹕ NFW(ModActivity$20#onReceive): jp.tkgktyk.xposed.niwatori consumed: jp.tkgktyk.xposed.niwatori.intent.action.SMALL_SCREEN
The first line is shortcut (action) name, above case is Small Screen, and the second line logged who consumed the action by package name, above is niwatori settings. If the consumer isn't expected package, add the package into blacklist in niwatori settings.
Well
tkgktyk said:
Niwatori changes the display position of the apps. The target device is a smartphone that has about 5-inch display because the purpose is one-handed operation.
Niwatori introduces flying mode to apps and status bar. In the flying mode, you can move the display position of them.
**
Niwatori was my local version of Flying Android. I released Niwatori since Xposed framework supports Android 5.0 Lollipop.
Differences:
- Abolished FA Toggle, pin, flying dialog and notification shortcut features.
- Control the window only by shortcuts.
- Fly the status bar in the same way as the apps.
**
Download: Xposed Module Repository
v0.1.1: tested on Android 5.0.1 and 4.4.4.
Click to expand...
Click to collapse
How do I use it ?
tkgktyk said:
Niwatori changes the display position of the apps. The target device is a smartphone that has about 5-inch display because the purpose is one-handed operation.
Niwatori introduces flying mode to apps and status bar. In the flying mode, you can move the display position of them.
**
Niwatori was my local version of Flying Android. I released Niwatori since Xposed framework supports Android 5.0 Lollipop.
Differences:
- Abolished FA Toggle, pin, flying dialog and notification shortcut features.
- Control the window only by shortcuts.
- Fly the status bar in the same way as the apps.
**
Download: Xposed Module Repository
v0.1.1: tested on Android 5.0.1 and 4.4.4.
Click to expand...
Click to collapse
Good Job!
It seems to be the first module which has updated to adapt for new Xposed on Lollipop!
But i'm new to FlyingAndroid/Niwatori. My Device has no virtual navigation buttons and can't call the app as you shown on Youtube. is it now possible to call the app and scale the screen out by setting some kind of triggers???
Thanks in advance!
Demonbane_x said:
Good Job!
It seems to be the first module which has updated to adapt for new Xposed on Lollipop!
But i'm new to FlyingAndroid/Niwatori. My Device has no virtual navigation buttons and can't call the app as you shown on Youtube. is it now possible to call the app and scale the screen out by setting some kind of triggers???
Thanks in advance!
Click to expand...
Click to collapse
I got it, finnaly. You can add a gesture to every setting. But I see no use to it fi I can't put 2 window in the same screen.
@GalaxyS4_Lollipop;
@Demonbane_x;
Trigger for Niwatori is shortcut. The "shortcut" is the same as ordinary shortcuts of any apps. So you can fire "shortcut" from home app, launcher app, GravityBox's action (works on lollipop?) , etc.
This mod moves the display position of foreground app, but not show multiple apps. In the screenshots, I only show one app (Niwatori UI) and expanded statusbar.
This module not working on MIUI 6.
sugestion
tkgktyk said:
@GalaxyS4_Lollipop;
@Demonbane_x;
Trigger for Niwatori is shortcut. The "shortcut" is the same as ordinary shortcuts of any apps. So you can fire "shortcut" from home app, launcher app, GravityBox's action (works on lollipop?) , etc.
This mod moves the display position of foreground app, but not show multiple apps. In the screenshots, I only show one app (Niwatori UI) and expanded statusbar.
Click to expand...
Click to collapse
I like the idea of making floating apps, but if you can't put two apps in one window , I don't know for what to use it.
You are a good developer , I hope you will make an app like XHaloFloatingWindow for lollipop in future.
doesn't fly the window
I associate the "toggle" NFW action with a gesture via GMD Gesture Control. When I execute the gesture, it doesn't fly the window. Instead, it opens the Niwatori settings app.
I should add that most of the time it does nothing at all. I know I'm executing the gesture correctly because I get the correct haptic feedback. I'm using the paid app.
Seems promising, gonna try it out
Amazing app!
One problem I saw that came up was that I was no longer able to perform the second pull-down of the notification bar from the middle of the screen; instead, I now have to reach my thumb upwards far more.
I think the module changes the trigger area. Can you check this out? It would make life easier!
And by second pull-down, I mean the method to get from notifications to toggles (bt, wifi, etc.)
exodius48 said:
This module not working on MIUI 6.
Click to expand...
Click to collapse
Sorry, I cannot test on MIUI.
GalaxyS4_Lollipop said:
I like the idea of making floating apps, but if you can't put two apps in one window , I don't know for what to use it.
You are a good developer , I hope you will make an app like XHaloFloatingWindow for lollipop in future.
Click to expand...
Click to collapse
XHaloFloatingWindow is one of the best modules. I cannot make such app.
But I cannot use halo window efficiently because my phone doesn't have enough display size for multi window. On the other hand, I don't reach thumb at the top of the screen. I need to pull down the screen.
Jimmy34742 said:
I associate the "toggle" NFW action with a gesture via GMD Gesture Control. When I execute the gesture, it doesn't fly the window. Instead, it opens the Niwatori settings app.
I should add that most of the time it does nothing at all. I know I'm executing the gesture correctly because I get the correct haptic feedback. I'm using the paid app.
Click to expand...
Click to collapse
Please check these points:
If you fire the "toggle" action from the other launcher (e.g. home app), does the "toggle" work fine?
Close Niwatori settings app before you use its actions.
If you need a refund, please tell me your order number by email or private message on XDA.
EDITED: I tried GMD Gesture Control, however it says "no supported device". (because of lollipop?)
georgelogan said:
Amazing app!
One problem I saw that came up was that I was no longer able to perform the second pull-down of the notification bar from the middle of the screen; instead, I now have to reach my thumb upwards far more.
I think the module changes the trigger area. Can you check this out? It would make life easier!
And by second pull-down, I mean the method to get from notifications to toggles (bt, wifi, etc.)
Click to expand...
Click to collapse
Thanks. I checked it out and It's a bug certainly. I want to fix it.
Can do split screen for two applications on the Samsung firmware?
tkgktyk said:
Please check these points:
If you fire the "toggle" action from the other launcher (e.g. home app), does the "toggle" work fine?
Close Niwatori settings app before you use its actions.
If you need a refund, please tell me your order number by email or private message on XDA.
EDITED: I tried GMD Gesture Control, however it says "no supported device". (because of lollipop?)
.
Click to expand...
Click to collapse
Right, GMD currently doesn't work on Lollipop.
I tried closing Niwatori settings before using its actions, but it still doesn't work.
I put the NFW actions widget on my home screen (selecting "toggle"), but when I press the widget, nothing happens.
Thanks, but I won't bother with the refund: I'm glad to throw you the support, and I'll keep re-testing the app every time you update. I hope you can try some things to make it work on my S4.
bonny_k-9 said:
Can do split screen for two applications on the Samsung firmware?
Click to expand...
Click to collapse
Sorry, I don't know Samsung's split screen. I have only old Samsung's device.
@Jimmy34742;
Thank you for your cooperation.
I found a fatal error in the settings. Depending on the combination of settings, it is not possible to change the window mode and move the app.
Please disable "Reset automatically" option basically. It is useful only when to fire actions from recents button.
bonny_k-9 said:
Can do split screen for two applications on the Samsung firmware?
Click to expand...
Click to collapse
Have a look here for an effective way to get split screen on any device. Make sure you read the entire OP (It's 4 posts long)
http://forum.xda-developers.com/showthread.php?t=2419287
vanisleguy1976 said:
Have a look here for an effective way to get split screen on any device. Make sure you read the entire OP (It's 4 posts long)
http://forum.xda-developers.com/showthread.php?t=2419287
Click to expand...
Click to collapse
I saw this application. It does not work correctly (logically) and is no longer updated.
tkgktyk said:
@Jimmy34742;
Thank you for your cooperation.
I found a fatal error in the settings. Depending on the combination of settings, it is not possible to change the window mode and move the app.
Please disable "Reset automatically" option basically. It is useful only when to fire actions from recents button.
Click to expand...
Click to collapse
I have "reset automatically" switched off, but it still doesn't work. If I don't back out of Niwatori's before going to another app, then the shortcut will re-enter Niwator at the same point. But if I exit Niwatori by backing out of it, then my shortcut just does nothing.
bonny_k-9 said:
I saw this application. It does not work correctly (logically) and is no longer updated.
Click to expand...
Click to collapse
You're mistaken on both points! It does work quite well, and it has been updated for lollipop. I've been using it since lollipop Xposed was released (even before it was 'officially' supported, it worked on version 2.38... It's now been updated to version 2.41)
I would ask to add double-click on a recent. In CM12 like as long press is already taken - switch between the last two applications.
The ability to run the application down to the user is in the Donut version?
vanisleguy1976 said:
You're mistaken on both points! It does work quite well, and it has been updated for lollipop. I've been using it since lollipop Xposed was released (even before it was 'officially' supported, it worked on version 2.38... It's now been updated to version 2.41)
Click to expand...
Click to collapse
I said that logic does not suit me. A developer does not do anything to add / edit functions.
new version is available with stable version no bugs goto http://forum.xda-developers.com/yureka/themes-apps/app-gexture-enable-wakeup-gesture-link-t3226437
Amazing work brother, works like a charm, just a little problem, when I link the camera app with "C" gesture, it does open but it by-passes the pattern lock too so anyone can now open the pattern lock by drawing C while the screen is off, so could you do something so that if the user drew C , it opens camera and then if home key or back key was pressed, it would get back to the pattern lock screen?
parasthakur37 said:
Amazing work brother, works like a charm, just a little problem, when I link the camera app with "C" gesture, it does open but it by-passes the pattern lock too so anyone can now open the pattern lock by drawing C while the screen is off, so could you do something so that if the user drew C , it opens camera and then if home key or back key was pressed, it would get back to the pattern lock screen?
Click to expand...
Click to collapse
Working on it...
Nice Job Bro....
I was waiting for this one very desperately...
:good::good::good::good::good::good:
Everything is works IFF SElinux status is permissive (update OP for that)
Hey... I am not a yureka user.. But app looks really good please add support for other devices running cm or aosp and also instructions for developers what changes to be made while compiling custom kernel to make this app compatible..
You may publish it on playstore too
gohel.vishal said:
Working on it...
Click to expand...
Click to collapse
i want to use this please help me.
now i am on stock and i am getting this error please tell me how to solve this .
gohel.vishal said:
geXture:Enable different wake up gestures, apart from the default 'Double tap to Wake' And Link Apps Or Media Control
Hi Yureka Users!...
I Have Something Special For You....
This Is My First Android Application on xda...
What Is geXture?
geXture is application that enables screen-off gesture and link apps or different media control like oppo devices..
Available Gestures
Double Tap
Swipe Up
Swipe Down
Swipe Right
Swipe Left
Draw 'O'
Draw 'E'
Draw 'M'
Draw 'W'
Draw 'C'
Recommended Settings
Double Tap - No Action
Swipe Up - Media Play/Pause
Swipe Down - Media Stop
Swipe Right - Media Next
Swipe Left - Media Prev
Draw 'O' - Camera
Draw 'E' - Browser(Uc Browser,Google Chrome)
Draw 'M' - Messenger
Draw 'W' - Whatsapp
Draw 'C' - Dialer(Stock,TrueDialer)
Screenshot
Download From Attachment
Please Note: This app works only on YU Yureka. App requires root acess to function and works on any rom or kernel compiled from CM sources
XDA:DevDB Information
geXture, Device Specific App for the YU Yureka
Contributors
gohel.vishal
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-05-10
Created 2015-05-10
Last Updated 2015-05-10
Click to expand...
Click to collapse
Bro, can we use these gestures to open apps of our choice?
Or we can only use the mentioned apps with gestures.
Shivam Vashishtha said:
Bro, can we use these gestures to open apps of our choice?
Or we can only use the mentioned apps with gestures.
Click to expand...
Click to collapse
You can use any app of your choice
gohel.vishal said:
You can use any app of your choice
Click to expand...
Click to collapse
I tried.. But gestures aren't working.. I am using Yureka on stock CM12, CWM recovery and stock kernel.
Help!
gohel.vishal said:
Click to expand...
Click to collapse
now it is working very nice app.
suggestion : application should be in alphabetical order. :good:
bug: i dont know everybody is facing or not.
using gesture go to app.
now go to home and now you can not go to recent panel. to go to recent panel have to lock device and unlock it now you can go to recent panel
Does this work with andriod 5.1
what about stock os?
Is this app not installable in stock os that has been now updated to lollipop using official download(upgrade)?
What can be done for this situstion?:angel:
Great Work, very promising
This works very well. however i would like to note down some observations
1. I keep getting geXture started toast every now and then
2. You need to launch the application once every reboot. (in spite of allowing autostart at the beginning)
3. The app list should be alphabetical order as pointed out earlier by Ashish earlier.
4. Single tap and long on physical home button seems to stop working when this app is active. Double tap works..
5. Long press on menu does not work.
I am on stock CM12
Would this have an impact on the battery and if yes how significant?
and last but not the least the OP should make it clear that SELinux mode has to be permissive for this app to work. i uninstalled it once because i thought it was not working
Doesn't work
@gohel.vishal
I am a YUser,I have got CM12 & Thunderzap kernal installed!This tool is not working,it just takes me to the lock-screen after any gesture i.e. it only wakes yureka up.
Hi,
I am also on YU stock ROM and kernel but getting FC on invoking the gesture.
Great app however needs improvement
First of all I would like to appreciate the efforts behind this app.
Secondly I would like to point out a bug in this.
As it requires root, if gesture is supplied to a locked device with secure lockscreen enabled, it surpasses it to open the app or perform the task. And moreover few apps like swiftkey (keyboard) do not provide full functionality with such unlock.
Eg : -
1. Set some gesture to open Whatsapp.
2. Set a secure lockscreen.
3. Set Swiftkey as main keyboard. (Enable gesture typing)
4. Lock phone.
5. Provide whatsapp opening gesture.
Bug - You won't be able to use gesture typing unless you lock your phone, stay on lock screen, unlock your phone by providing unlock code. After then only gesture typing can be done.
I believe there is a counter set in apps like swiftkey that check whether lockscreen secure, then do not allow gesture as it may allow a user to identify the password (Which I believe could be the case and if so it is good).
Proposed Solution : I believe before unlocking and opening the app, you would need to take the user to secure lockscreen page and then only allow opening the app. As if someone else comes to know the gesture of any app it would become a security breach.
I am not an android developer, but I can help you with testing and some use cases.
Cheers !!
Little bugs
Swipe no working on SwiftKey after installing it... .
I think u have stopped working on this app....
I have given U credits for this app in my thread http://forums.yuplaygod.com/threads/rom-arm64-yureka-port-5-0-2-miui-v6-lollipop.20135/
Can you please make this available for YUPHORIA too?
hariks0 said:
Can you please make this available for YUPHORIA too?
Click to expand...
Click to collapse
Does youphoria have double tap?
Hi guys,
I'm using the smart lock/unlock feature on a Android 6 phone. But I can only select 30mins for the unlock-state, and smart unlock is very unrelyable.
My problem is that for using GooglePay, I have to set a lockscreen. But throughout the day I'd prefer having the screen always unlocked. Only in case I active NFC, I want the lockscreen to be active.
So maybe there is a way I could change the 'lock_screen_lock_after_timeout' settings to eg a couple of days (or even endless)?
Thanks
I faced the exact same issue.
I ended up following your suggestion and setting lock_screen_lock_after_timeout to several days.
It works, however the screen doesn't lock at all, which means when you press the power button you you will get straight to the launcher or whatever app was launched. Some people will be OK with it, but personnally I miss the "swipe to unlock" feature.
edit: I just noticed you are on Android 6. In that case, you could use Xposed in conbination with the lockscreen disabler module. It will let you disable the lock screen and trick Google pay into thinking it is enabled. It used to work great on my previous phone. Sadly, Xposed trips Safetynet so Google Pay will most likely refuse to work.
Can I use Xposed without root? Cause I don't want to root my phone just for that feature.
How did you set the property? Do you use any app?
The problem is, I know the property to be set, but I don't know how to achieve that