Spike Laboratory - Metallium
Features , changelogs and screenshots can be found on Spike Laboratory - WEB
SUPPORT FOR SPLM RELATED ISSUES :
We spend an astonishing amount of time developing this firmware.
We can't spend much time on XDA as a result, so if you need support, please try the following:
Ask a question in your device forum in XDA. Someone will no doubt try to help you.
Our device maintainers are going to help you so pm them.
Any bugs or any other issues report to the device maintainers.
If you want to contribute or join to the device maintainer team contact either team leaders or device maintainers.
We expect that users help each other, well xda is a ll about it.
OFFICIAL LINKS & INFORMATIONS :
Official Web-Page
SPLM ROM
RECOMMENDED GAPPS
(Please do not mirror Download links or Mention Link in any of your posts )
INSTALLATION STEPS:
Minimum Requirements To Install SPLM:
Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
Recommended Custom Recovery TWRP : Click Here to View TWRP Offical supported devices
Installation Procedure:
(A)If you are making a Fresh Installation(or coming from any other rom other than SPLM) :
Boot Into Recovery Mode
Wipe Data,System,Cache,Dalvik
Flash provide latest SPLM ROM Zip
Again Wipe Cache and Dalvik
Reboot To System
Now again Reboot into Recovery Mode
Flash latest G-Apps
Wipe Cache and Dalvik....and Reboot To System.
Click to expand...
Click to collapse
(B)If you are already Running SPLM Rom But you want to update with latest version:
Boot Into Recovery Mode
Flash provided Updates of SPLM ROM(latest weekly)
Again Wipe Cache and Dalvik
Reboot To System.
Click to expand...
Click to collapse
SOURCE:
SPLM ROM SOURCE
SPLM DEVICES SOURCE
CREDITS:
Spelegius
Rehan
Mardon
olarf
mkodekar
Buda1996
Yann Molle
tilaksidurim
Men_in_black
Mythi
ALL SPLM team
CM
AOSPA-L
WHO ARE WE AND WHAT ARE WE DOING?:
TEAM SPIKE LABORATORY
http://forum.xda-developers.com/donatetome.php?u=4758315
XDA:DevDB Information
Metallium ROM, ROM for the YU Yureka
Contributors
vibhu0009
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked bootloader
Version Information
Status: Stable
Created 2015-08-29
Last Updated 2015-08-29
screenies:
How to set different ringtones for sim 1 and 2
---------- Post added at 02:53 PM ---------- Previous post was at 02:52 PM ----------
Xposed is not working too
---------- Post added at 02:58 PM ---------- Previous post was at 02:53 PM ----------
Rom is smooth and good..I am facing above 2 problems other than that it's good.. on flashing xposed sdk..and rebooting it boots and just show a white coloured patch on the centre of the screen and background is completely black..I think it goes on bootloop
If u can't reply to queries than its better to delete this thread
Sent from my SM-N900 using Tapatalk
constantine23 said:
How to set different ringtones for sim 1 and 2
---------- Post added at 02:53 PM ---------- Previous post was at 02:52 PM ----------
Xposed is not working too
---------- Post added at 02:58 PM ---------- Previous post was at 02:53 PM ----------
Rom is smooth and good..I am facing above 2 problems other than that it's good.. on flashing xposed sdk..and rebooting it boots and just show a white coloured patch on the centre of the screen and background is completely black..I think it goes on bootloop
Click to expand...
Click to collapse
Xposed works.. tested by my testers
What about setting ringtones..and can u post the link of xposed installer and sdk zip that are tested by ur testers so that I can test it too...
Sent from my SM-N900 using Tapatalk
constantine23 said:
What about setting ringtones..and can u post the link of xposed installer and sdk zip that are tested by ur testers so that I can test it too...
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
Check YU forums n u wil get everything there
@vibhu..why did u stopped the development of this rom...it's rock solid..I just have two problems as I have mentioned in earlier posts other than that it's very stable rom...
constantine23 said:
@vibhu..why did u stopped the development of this rom...it's rock solid..I just have two problems as I have mentioned in earlier posts other than that it's very stable rom...
Click to expand...
Click to collapse
its not stopped.. it will be up very soon again.. am busy with few other stuff right now
Okk..brother take ur time..till then I am using ur rom without xposed...good luck
Sent from my SM-G920F using Tapatalk
Related
Introduction:-
In the original build i was getting bootloop (something related to "libs" folder) so i decided to move "apps,etc,bin,xbin"...It booted but i was getting systemui.apk,so i used systemui.apk from cm10.2,now it's working fine but i get pa preferences force close I even tried using framework from original build but i got bootloop...Suggestions?
Remember:-
-This is only for developers ! N00BS GET LOST!
Downloads:-
-Experimental Build
Sources:-
-My Github(device tree)
-XperiaNovathor
-Kernel Source
How to flash:-
-Download rom
-Go CWM
-Wipe data
-Install rom
-Reboot
Please help @munjeni @percy_g2 @Andrewasth @Gava97@Divaksh @SpaceCaker
Xu is very especial with roms.
Try a logcat have you try editing res/xml/ storage_list.xml from original rom to PA ?¿
u flashed pa gapps ?
@percy_g2 not bro...do you think it's related to that?
DroidModderXtreme said:
@percy_g2 not bro...do you think it's related to that?
Click to expand...
Click to collapse
those are needed ,that's the cause of systemUI fc and other issues
Greaaaaattttttttttttttttttttttttttttttttttttttttttt !!!!!!!
Thanks buddy
I usually don't flash gapps for trying cm10.2 builds but here... thanks thanks and thanks !!!!!
well the rom still a experimental build so we have those bugs:
camera is fliped,but the video recording works,
the system ui don't crash if you flash the paranoid gapps
the paranoid settings get fc
if you need a tester send me a pm
DroidModderXtreme said:
Greaaaaattttttttttttttttttttttttttttttttttttttttttt !!!!!!!
Thanks buddy
I usually don't flash gapps for trying cm10.2 builds but here... thanks thanks and thanks !!!!!
Click to expand...
Click to collapse
Well so now only remainds pa conf
Maybe it need pa framework to work
Enviado desde mi Xperia U usando Tapatalk 2
.......
Flashing PA GApps the problem persists
I'll see what i can do?
DroidModderXtreme said:
.......
Flashing PA GApps the problem persists
I'll see what i can do?
Click to expand...
Click to collapse
Gapps:https://plus.google.com/107979589566958860409/posts/QEnJ25VanKN
They are more big than the rom
---------- Post added at 07:21 PM ---------- Previous post was at 07:05 PM ----------
werty100 said:
Gapps:https://plus.google.com/107979589566958860409/posts/QEnJ25VanKN
They are more big than the rom
Click to expand...
Click to collapse
Install rom with this GAAPS
I will post logcats
---------- Post added at 07:29 PM ---------- Previous post was at 07:21 PM ----------
werty100 said:
Gapps:https://plus.google.com/107979589566958860409/posts/QEnJ25VanKN
They are more big than the rom
---------- Post added at 07:21 PM ---------- Previous post was at 07:05 PM ----------
Install rom with this GAAPS
I will post logcats
Click to expand...
Click to collapse
First imprexion:
Fix Reboot after inserting pin code.
android.proccess.media has crashed
inverted camera you need FIX.
I am locking why the halo crashed
incredible no R of roaming on my phone you are the best
Smother no the next
Apps with need access permisions to SDCARD crashed
A lot of apps crashed
No access to SDCARD
@werty100 i released this for helping.not for reviews...
I flashed those gapps,i got the same erorr
DroidModderXtreme said:
@werty100 i released this for helping.not for reviews...
I flashed those gapps,i got the same erorr
Click to expand...
Click to collapse
Sorry i try to help saying what happen to the rom possitive things and bad things if SDCARD is fixed will be very stable.
Camera Reverse is very easy to fix
Intéressant
Sent from my ST25i using xda app-developers app
Omni is an aftermarket firmware for a number of cell phones based on the open-source Android operating system.
It offers features not found in the official Android based firmwares of vendors.
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
Single SIM
Sensors (Accelerometer, Compass,)
Camera
Video playback
Audio
GPS
Everything else not listed under "known issues"
Known Issues
You can say to me
================================================== ===========================
Downloads
Beta : http://www.4shared.com/zip/tTDanVaGba/omni-20141212-UNOFFICIAL-corsi.html
Google Apps: http://forum.xda-developers.com/showthread.php?t=2397942
CamCoder FIx: http://d-h.st/p6fD
SuperSU: http://download.chainfire.eu/supersu
================================================== ===========================
Installation
1. Go to CWM recovery do wipe data/factory reset.
2. Install ROM
3. Install CamCoder fix
3. Install GAPPS
4. Install SuperSU
5. Reboot
================================================== ==========================
Device Source: https://github.com/happyhere/android_device_corsica
Kernel Source: https://github.com/happyhere/Kernel_S5310-5312
XDA:DevDB Information
[Omni][For Samsung Galaxy Pocket Neo & Duos][S5310/S5312], ROM for the Samsung Galaxy Pocket Neo S5310
Contributors
happyhere, karthick mostwanted, dhinesh77, k2wl , pawtit
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Latest CWM recovery 6.0.5.x
Based On: Omni
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2014-05-09
Created 2014-12-21
Last Updated 2015-05-09
Reserved
2014/12/21 : Beta version released
2015/05/09: Stable version released
P/s: i stopped project and devs along time, the stable version only fix bugs not new updates Omni only used for experience :v
screenshots?
happyhere said:
Omni is an aftermarket firmware for a number of cell phones based on the open-source Android operating system.
It offers features not found in the official Android based firmwares of vendors.
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
Single SIM
Sensors (Accelerometer, Compass,)
Camera (photo)
Video playback
Audio
GPS
Everything else not listed under "known issues"
Known Issues
Camcoder, Sound Recorder
Wifi hotspot
================================================== ===========================
Downloads
Beta : http://www.4shared.com/zip/xxis1fWoba/omni-20141212-UNOFFICIAL-corsi.html
Google Apps: http://forum.xda-developers.com/showthread.php?t=2397942
SuperSU: http://download.chainfire.eu/supersu
================================================== ===========================
Installation
1. Go to CWM recovery do wipe data/factory reset.
2. Install ROM
3. Install GAPPS
4. Install SuperSU
5. Reboot
================================================== ==========================
XDA:DevDB Information
[Omni][For Samsung Galaxy Pocket Neo & Duos][S5310/S5312], ROM for the Samsung Galaxy Pocket Neo S5310
Contributors
happyhere, karthick mostwanted, dhinesh77, k2wl , pawtit
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Latest CWM recovery
Based On: Omni
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2014-12-12
Created 2014-12-21
Last Updated 2014-12-21
Click to expand...
Click to collapse
Good job! I'm really enjoying this ROM! But I cannot use WiFi.
---------- Post added at 03:30 AM ---------- Previous post was at 03:13 AM ----------
synest said:
Good job! I'm really enjoying this ROM! But I cannot use WiFi.
Click to expand...
Click to collapse
Nevermind! If you flash hyper kernel the WiFi comes to life. This ROM is great!
no wifi
synest said:
Good job! I'm really enjoying this ROM! But I cannot use WiFi.
---------- Post added at 03:30 AM ---------- Previous post was at 03:13 AM ----------
Nevermind! If you flash hyper kernel the WiFi comes to life. This ROM is great!
Click to expand...
Click to collapse
hi ! I installed this rom as well.. same issue with the WIFI.. everything works but the WIFI, I got the hyper kernel, and it did not fix the wifi issue, any ideas recommendations ? thanks !
Well, i have done the following:
Wipe/Format
Install omnirom then gapps (pico)
Boot normally but WiFi did not work
Boot into CWM and then flash hyperV3_prime (CM11)
WiFi is working for me
synest said:
Good job! I'm really enjoying this ROM! But I cannot use WiFi.
---------- Post added at 03:30 AM ---------- Previous post was at 03:13 AM ----------
Nevermind! If you flash hyper kernel the WiFi comes to life. This ROM is great!
Click to expand...
Click to collapse
synest said:
Well, i have done the following:
Wipe/Format
Install omnirom then gapps (pico)
Boot normally but WiFi did not work
Boot into CWM and then flash hyperV3_prime (CM11)
WiFi is working for me
Click to expand...
Click to collapse
ok I did the same basically... and it's not working ... obrigado !
Will it work on pocket plus?
error status7
with CWM-6.0.4.X i got E:Error in /sdcard/omni... (Status7)
Please don't quote the main thread guys, make this thread clean
Just quote shorter text or important only & before ask something,
Please do spend some time reading the whole thread first,
It's help developer to organize things efficiently in their thread
So please co-operate
---------- Post added at 07:53 PM ---------- Previous post was at 07:44 PM ----------
@happyhere Is this ROM up-to-date with latest omni sources? & is this ROM also
will be updated in future? I'm looking forward for final release :good:
bluetooth not working
bluetooth not working
Bluetooth not working love the rom but Bluetooth issue also would like to ask how did you get rotation to work?
yes
kgalv419 said:
Bluetooth not working love the rom but Bluetooth issue also would like to ask how did you get rotation to work?
Click to expand...
Click to collapse
thank you rotation also not working but we can make it work by applying karthick most wanted and happywhere theory of android
Ok cool just keep us updated with any new fixes looking forward to fully using this rom
any title
holy cow thank you
naveenay said:
holy cow thank you
Click to expand...
Click to collapse
holy F*UC*K thank you
omni
holy F*UC*K thank you
Perfect rom but i've a problem witch is vibration,i can't use vibration on anything please help
[Android5.0.2] Red Rice Note 4G TD / W version CM12 experience Third Edition by Syhost
I didnt created this rom, This rom made user from miui forum his name is Syhost.
LINK TO ORIGINAL THREAD: http://en.miui.com/thread-91779-1-1.html
Things not working:
1. Camera
Instructions:
Download http://www.mediafire.com/download/3fgtidcxp3gqm6d/cm-12-20150305-UNOFFICIAL-dior.zip.
Use a custom recovery to flash the zip
Wipe Data and Cache before rebooting.
Install Gapps
ENJOY
Version Information
Last Updated 2015-03-10
RESERVED
Thank you for sharing.
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
Can custom camera be used instead?
No but he is trying to fix it so we must wait.
The other lollipop thread in this section is about the very same rom. :-/
Gps not working, anyone else with this problem ?
I think GPS is hit and miss but can be solved with a combination of reboots and wiping data.
YuanweiOS is based Candy7(Special thanks to Candy7 team).The main aim is to make ROM smooth and to add only necessary Features. We wanted to give the users a fun, fully customizable ROM. We will keep this ROM smooth and best in performance side and minimal on features side.
YuanweiOS Github
Disclaimer: We are not responsible for bricked devices, dead SD cards, thermonuclear war, or the current economic crisis caused by you following these directions. YOU are choosing to make these modificiations, andif you point your finger at me for messing up your device, I will laugh at you.
FEATURES
Battery bar
Multi-window
Status bar customization
Advanced power menu
Buttons settings:
-Long-press/double-tap actions
-Volume rocker
Brevent
Magsik
And so on ...
Flashing Steps:
Coming from another rom
1) Download YuanweiOS.zip
2) Download OpenGapps
3) Boot into recovery (TWRP)
4) Full wipe (Dalvik Cache, Cache, System, Factory Data Reset)
5) Flash YuanweiOS.zip
6) Flash Gapps
7) Reboot
Updating from previous YuanweiOS release
1) Download YuanweiOS.zip
2) Boot into recovery
3) Flash YuanweiOS.zip
4) Reboot
Special thanks to CandyRoms, LineageOS, SlimRoms, Omni, TeslaROM, and all the rest who make their source open. We can't do this on our own.
Webside
[ROM]YuanweiOS
ROM:
[ROM]YuanweiOS-K5plus A6020
Contributors
jsbeyond,Yihao
Source Code:
https://github.com/yuanwei-os
https://github.com/YuanWei-OS/device_lenovo_A6020/
ROM OS Version: 7.1.2
ROM Kernel: Linux 3.1.x
Version Information
Status:Stable
Created 2017-07-18
Last Updated 2017-07-18
If you like my work, please donate to me
Any screenshot?
https://plus.google.com/communities/112720517052084764225
join
https://t.me/yuanweios
Battery life in this ROM?
ManoharNani said:
Battery life in this ROM?
Click to expand...
Click to collapse
try and feedback
Volte?
ROM z gud
---------- Post added at 08:13 PM ---------- Previous post was at 08:13 PM ----------
Battery life have 2 improve
ManoharNani said:
ROM z gud
---------- Post added at 08:13 PM ---------- Previous post was at 08:13 PM ----------
Battery life have 2 improve
Click to expand...
Click to collapse
Some screenshots?
This ROM z really so gud & stable with Inbuild Root(Magisk)
Everything z working fine
Dear Developer next update.....
Plz add battery saving kernal
Tq u
hridhi said:
Some screenshots?
Click to expand...
Click to collapse
?
It is the final version?
What about volte
Important information:
This thread is for LineageOS 16.0 opensource builds for Wingtech WT88047, marketed as Redmi 2 by Xiaomi. The following will not be supported in this thread:
Custom Kernels
Mods
Modified system files
Xposed
Magisk
OMS
What's not working:
VoLTE
Installation:
If you are on the stock OS, you will first need a custom recovery. You can get the recommended TWRP recovery here.
If you are coming from stock or other ROMs, you need to do a factory reset.
As always, make sure to backup before installing this ROM.
For more detailed instructions, please visit:
Install LineageOS on wt88047
Download link:
Google Drive
Recommended Google Apps package:
MindTheGapps
Recommended Firmware:
Google Drive
Changelog:
Changes for wt88047
Bug reports:
How to submit a bug report
Gitlab Issues
Donate to support development:
Donate via PayPal to nicknitewolf
Donate via PayPal to LineageOS
Source Code:
Device tree
Kernel
Contributors
@nicknitewolf , GuaiYiHu , @mikeNG . @jrior001
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: M8936FAAAANUZM-1.33887.1.41528.1
Based On: LineageOS
Reserved
Nice thread banner!
thanks a lot, nick :good:
Thank you very much!
mikeioannina said:
Nice thread banner!
Click to expand...
Click to collapse
( ͡° ͜ʖ ͡°)
works great on 1 GB version, hopefully will get official build too
thank you so much
running well on redmi 2 prime without GAPPS
Screenshots
Cannot install Gapps.. it says error 70
-----------------
Edited : Now i can install Gapps after repartition system to 2gb using this tutorial
https://forum.xda-developers.com/redmi-2/themes/twrp-resize-partition-easily-t3803042
Thankyou so much!!!
ovinitas said:
Cannot install Gapps.. it says error 70
Click to expand...
Click to collapse
Which gapps?
nadimhd said:
Which gapps?
Click to expand...
Click to collapse
OpenGapps.. But I already fix it.. with this tutorial..
https://forum.xda-developers.com/redmi-2/themes/twrp-resize-partition-easily-t3803042
I only need to re-partition system to 2gb
And everything run flawlessly... :laugh::good::fingers-crossed:
nadimhd said:
Screenshots
Click to expand...
Click to collapse
How to get onscreen buttons
dabakale said:
How to get onscreen buttons
Click to expand...
Click to collapse
By editing build.prop
---------- Post added at 04:28 PM ---------- Previous post was at 04:26 PM ----------
ovinitas said:
OpenGapps.. But I already fix it.. with this tutorial..
https://forum.xda-developers.com/redmi-2/themes/twrp-resize-partition-easily-t3803042
I only need to re-partition system to 2gb
And everything run flawlessly... :laugh::good::fingers-crossed:
Click to expand...
Click to collapse
No repartition required if you flashed the recommended gapps.
nadimhd said:
By editing build.prop
---------- Post added at 04:28 PM ---------- Previous post was at 04:26 PM ----------
No repartition required if you flashed the recommended gapps.
Click to expand...
Click to collapse
Nah..... I am still getting error 70 with MindTheGapps / Recomended Gapps
But anyway.. this Rom is Amazing and so much better
compared to Lineage OS official 15 ..
So why is this not official though?
ovinitas said:
Nah..... I am still getting error 70 with MindTheGapps / Recomended Gapps
But anyway.. this Rom is Amazing and so much better
compared to Lineage OS official 15 ..
So why is this not official though?
Click to expand...
Click to collapse
Will be official soon maybe
Pixel launcher keep force closed, i'm using opengapps(aroma) i did exclude pixel icons cause it says 7.1 only but i do remember including it when i flash oreo rom and nothing happen. But its still force closed with or without pixel icons. Good things trebuchet didn't unisntalled automatically. I'll try redownload the gapps and see if its happen again, or maybe try different gapps variant.
recovery link error 404 @nicknitewolf
Update 24/06/19
- Remove excessive logging which may have caused battery drain
- System profiles should be working properly again
https://drive.google.com/uc?id=1FFJRXjZU5QcYqCR7FPlZDBQ-yuU0cGyl&export=download
nicknitewolf said:
Update 24/06/19
- Remove excessive logging which may have caused battery drain
- System profiles should be working properly again
https://drive.google.com/uc?id=1FFJRXjZU5QcYqCR7FPlZDBQ-yuU0cGyl&export=download
Click to expand...
Click to collapse
When I am installing Your ROMS..
I always havin error : 7 on TWRP..
And must Edit META-INF -> COM -> Google -> Android -> updater-script
And erase All Phone Model On it.. so i can install your roms..
Can you fix this?? So I Can update this phone easily
And One more thing..
Wi-Fi working but really2 slow.. compared to Previous Lineage OS..
There is no bug so far.. just Wi-Fi is Slow..
on Lineage OS i can get 20mbps but on this Rom.. only 4-8mbps with really really high ping time.