Second attempt to fix this nasty bug using Xposed.
Now we have a new fix from Jose Ferreira aka @Bazoocaze, so all fame should go him! I just implemented it as Xposed module.
More details you can find in @Bazoocaze's thread: http://forum.xda-developers.com/xperia-zl/general/cm12-1-cell-standby-mobile-radio-active-t3188147
Source, just in case: https://github.com/pylerSM/MobileRadioActiveFix
Module is not yet in repo, we need more tests.
Download: http://repo.xposed.info/module/com.pyler.mobileradioactivefix
Thank you. Original post is here:
http://forum.xda-developers.com/xperia-zl/general/cm12-1-cell-standby-mobile-radio-active-t3188147
First impression are good, thanks for the good work. Really appreciated
edit: omfgggg battery is killer with the xposed. i think they have done it, that patch works
Works on bacon Oneplus One Exodus Rom 5.1.1
Doesn't seem to work on Oneplus with Sultans stable. Module loads but apps still shows loads of MRA
Skickat från min A0001 via Tapatalk
Nexus 6 CM12.1 nightly
I will try this out an report solutions.
pyler said:
Second attempt to fix this nasty bug using Xposed.
Now we have a new fix from Jose Ferreira aka @Bazoocaze, so all fame should go him! I just implemented it as Xposed module.
More details you can find in @Bazoocaze's thread: http://forum.xda-developers.com/xperia-zl/general/cm12-1-cell-standby-mobile-radio-active-t3188147
Source, just in case: https://github.com/pylerSM/MobileRadioActiveFix
Module is not yet in repo, we need more tests.
Download: http://repo.xposed.info/module/com.pyler.mobileradioactivefix
Click to expand...
Click to collapse
Can't install. Error: invalid apk. Is this an Expedia only mod?
Installed on s6 international. All fine, now test in progress
Inviato dal mio SM-N920C utilizzando Tapatalk
Does this version require an unlocked bootloader? I'm on an att galaxy s5 and can't unlock the BL.
slicetwo said:
Does this version require an unlocked bootloader? I'm on an att galaxy s5 and can't unlock the BL.
Click to expand...
Click to collapse
If you find the other way to root and install exposed framework. But I think bootloader is the key to this.
I already have xposed on a debloated TouchWiz. Didn't need to unlock the bootloader for it.
Soooooooo... Does this module require the BL unlocked, or just xposed?
slicetwo said:
I already have xposed on a debloated TouchWiz. Didn't need to unlock the bootloader for it.
Soooooooo... Does this module require the BL unlocked, or just xposed?
Click to expand...
Click to collapse
Oh didn't know, so then you could just test it(?) I don't see why it would need unlocked bootloader if other modules work. I might be wrong...
Groovy. I just don't wanna get stuck in a bootloop and have to redo my phone.
No bootloop, no need of unlocked bootloader. It is a normal Xposed module.
Pyler do you notice any improvement after using this?
for my yuphoria
plz help me ....................
i have yuphoria phone but in its don't work any xposed modual like Donkey guard
problem occur during runnging time.. so plz help...
and plz give best support or rom for my yuphoria...
and which xposed will work..on my phone.....
and must be work donkey guard.
:crying::crying::crying::crying::crying::crying::crying::crying:
it worksss !!! nexus 6 aicp rom 5.1.1
is this xposed module the same as the zip file on bazoocaze's thread?
Testing on xperia Z2 stock 5.1.1
Enviado desde mi D6503
Testing on Oneplus one 64GB, in Resurrection Remix ROM 5.1.1
Enviado desde mi A0001 mediante Tapatalk
Related
Hello, I decided to create this thread so people can share what modules currently work on Marshmallow. Please list all the compatible Xposed Modules below.
Reserved.
This thread http://forum.xda-developers.com/xposed/unofficial-list-modules-xposed-t3249162 already has a list of all the modules! =]
hltbest said:
This thread http://forum.xda-developers.com/xposed/unofficial-list-modules-xposed-t3249162 already has a list of all the modules! =]
Click to expand...
Click to collapse
Thanks for the link! looks like i created this thread for nothing!
quickly, which mod is working/best to do the following on our N6P/marshmellow?
1. change status bar stuff - show date/data traffic/swipe down from right for quick access etc
2. hide navigation button
thanks a million!
Try gravity box mm
byproxy said:
Try gravity box mm
Click to expand...
Click to collapse
where can i dl it?
its not in the official dl
aliguu said:
where can i dl it?
its not in the official dl
Click to expand...
Click to collapse
Turn on "Beta" in Xposed preferences.
GravityBox is now there. Just re-installed Xposed for GravityBox.
GravityBox MM works great on the 6p with the latest factory image.
Sd mount marshmallow
Verstuurd vanaf mijn SM-N920C met Tapatalk
Gravity box not working on redmi 3s prime miui 8 developer rom
Add missed lockscreen dialer shortcut on MIUIv7.
Also can change starting dialer package and activity.
Now tested only on Redmi Note 2 MIUI Global Stable 7.2.2.0 (5.0.2). Please, tell me if it's work on another devices and (important!) different android version.
Requirements
Your phone must be rooted
Xposed framework must be installed first
Instructions
Install the module
Activate module in Xposed Installer
Optional change dialer package name and activity in module UI
Reboot
Enjoy!
Credits
Thanks to kisasanya for patch!
Download
Xposed Module Repository
Could you add option to change icon? Mi home or mi remote icon maybe?
Sent from my hermes using XDA Labs
Firstly, let me thank for your work.
Reporting a proper behaviour in Mi3, MIUI v7 6.0.
Sent from my MI 3W using Tapatalk
rockernaxo said:
Firstly, let me thank for your work.
Reporting a proper behaviour in Mi3, MIUI v7 6.0.
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
Send me log xposed, please
xxxTy3uKxxx said:
Send me log xposed, please
Click to expand...
Click to collapse
There you go, but as I said, it's working all right.
https://mega.nz/#!kJQ2DBDb!2KvTMat_2Z-aW5q5d2vsuJLnqw94C6liiE54GY8toLs
Sent from my MI 3W using Tapatalk
Thank you but I have trouble using it. I installed it, I can see the phone icon, but when I slide to the right the MiHome comes up instead of the dialler. Am I doing something wrong?.Miui 7 on LG G2.
If anyone has put Xposed on their Honor 5X with the latest MM 6.0.1 update could you post which version/installer and if you had any problems?
no working on last xposed version, using twrp to flash.
stuck on HONOR animation for 10min and getting a bit hot
tried xposed uninstaller and everything is working now
Using this version: xposed-v86-sdk23-arm64.zip
With this apk.
Working well on both stock ROM b330 and CM13.
First boot can be a bit long, just be patient.
I used the file @mooms supplied and the first boot took a very, very long time. At first I thought it was stuck. But finally it booted up and it's working.
harryspar said:
I used the file @mooms supplied and the first boot took a very, very long time. At first I thought it was stuck. But finally it booted up and it's working.
Click to expand...
Click to collapse
20mins?
danino2200 said:
20mins?
Click to expand...
Click to collapse
It was at least 20, maybe even 25. I just left it alone for a while and did something else.
BTW, an entirely different issue is which Xposed Modules will be compatible.
Amplify works (for battery saving).
But many other modules (eg GravityBox) say they do not work with OEM skinned ROM's, only pure AOSP.
harryspar said:
It was at least 20, maybe even 25. I just left it alone for a while and did something else.
BTW, an entirely different issue is which Xposed Modules will be compatible.
Amplify works (for battery saving).
But many other modules (eg GravityBox) say they do not work with OEM skinned ROM's, only pure AOSP.
Click to expand...
Click to collapse
I know that was also said on the version for LP but I was able to use some of the functions of GravityBox like Expanded desktop Mode to hide navigation bar and enable volume keys to kip tracks when listening to music.
Sm0k3d 0uT said:
I know that was also said on the version for LP but I was able to use some of the functions of GravityBox like Expanded desktop Mode to hide navigation bar and enable volume keys to kip tracks when listening to music.
Click to expand...
Click to collapse
Exactly, GravityBox will run, but only some functions works with the stock ROM.
If you want a fully working GravityBox, switch to CM13! (however, roughly half of the features are already implemented in CM13).
guys which version of xposed for KIW-L21 B340?
Just go to xposed on xda lol
Demian3112 said:
Just go to xposed on xda lol
Click to expand...
Click to collapse
If you don't know the answer Just don't reply...useless help...if i would have found in the main thread i wouldn't have asked here...
Inviato dal mio KIW-L21 utilizzando Tapatalk
lucacerio said:
If you don't know the answer Just don't reply...useless help...if i would have found in the main thread i wouldn't have asked here...
Inviato dal mio KIW-L21 utilizzando Tapatalk
Click to expand...
Click to collapse
He meant there's an Xposed forum on XDA. All the info you need is there. He obviously knew the answer but didn't want to hand hold.
http://forum.xda-developers.com/xposed
Arobase40 said:
The answer was already given on post #3 by @mooms and guess what : the title of this thread is "Xposed on the new MM update" and B330/B340 are exactly MM !
Click to expand...
Click to collapse
I've used that file but the phone stucked on Honor logo for 1 hour...so i uninstalled it
Inviato dal mio KIW-L21 utilizzando Tapatalk
Arobase40 said:
You have surely done something wrong as it works perfectly fine !
Maybe you got a corrupted file...
http://dl-xda.xposed.info/framework/sdk23/arm64/
Click to expand...
Click to collapse
Re-downloaded but still not working
Inviato dal mio KIW-L21 utilizzando Tapatalk
Hello. I have tryed to install latest xposed on my b340 but i have a little problem. I cant recieve or start calls when that is installed. Has someone this problem too? How can i solve this problem? Please help me. Thanks
Try v83
This is full port of C900F (Indian Version), all things working good, It is having good speed and battery life
Working things
1. All C900F apps
2. Theme store
3. Edge apps
4. Spen and apps
5. Screen off memo
Bugs
1. Photo editor FC
2. Cant turn off torch from notification (need to use edge panel - quick settings)
3. Reboot or booting takes long time
4. No blurr for edge and air command
5. Heptic feedback not working
6. Fingure print & VoLTE not working
Right now I am somewhat stuck and not having time to work on this so if someone wants to contribute about bugs then welcome
Default kernel is for N910G, other model people need to flash kernel for their model I recommend RamKernel
Download link
https://www.androidfilehost.com/?fid=745425885120718779
XDA:DevDB Information
RamROM_C9, ROM for the Samsung Galaxy Note 4
Contributors
Ram121
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest marshmallow bootloader and modem
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2017-03-24
Created 2017-03-24
Last Updated 2017-03-24
reserve
may need
Is the fingerprint working?
Sent from my SM-N910F using XDA-Developers Legacy app
@JohnnyGhost666 Hmm...... That's a damm good question little buddy! You mind reading the Opening Post
Sent from my SM-N910F using XDA-Developers Legacy app
ops
---------- Post added at 08:02 PM ---------- Previous post was at 07:58 PM ----------
dancsuri said:
ops
Click to expand...
Click to collapse
JohnnyGhost666 said:
Is the fingerprint working?
Sent from my SM-N910F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Bugs
1. Photo editor FC
2. Cant turn off torch from notification (need to use edge panel - quick settings)
3. Reboot or booting takes long time
4. No blurr for edge and air command
5. Heptic feedback not working
6. Fingure print & VoLTE not working
Good job as always, much appreciated.
Shall the same kernel be used for N910-F that we use for Note 7 ports?
oqaab said:
Good job as always, much appreciated.
Shall the same kernel be used for N910-F that we use for Note 7 ports?
Click to expand...
Click to collapse
I dont know about others but for other models than G you can use RamKernel for that model it can work on all ports
Ram121 said:
I dont know about others but for other models than G you can use RamKernel for that model it can work on all ports
Click to expand...
Click to collapse
Just confirming 910G directly I can install right?
Will the fingerprint workaround work?
What about xposed?
Thank you Ram
tytnguy said:
Just confirming 910G directly I can install right?
Will the fingerprint workaround work?
What about xposed?
Thank you Ram
Click to expand...
Click to collapse
1 post: "Bugs"
dancsuri said:
1 post: "Bugs"
Click to expand...
Click to collapse
Thanks but, I am asking if the "workaround for fingerprint works?" Because finger print is something MUST have for me.
Trying this out for a bit - so far, very nice and smooth.
Sent from my SM-C900F using XDA-Developers Legacy app
Hello, Can I have a question? What is special in C900F rom? Everyone here is trying to port the N7, N5, S7 Edge... and you, my favourite Rom developer come with this. I am waiting for discussion but it seems nobody testing it . So I think, I will do.
Do you think this Rom will work on N910F with your RamKernel same asi on 910G? Or there can be more issues? THANKS for the RamRoms BTW!! ))
EDIT: I tried to instal.. Did full wipe, instal rom, instal ramkernel V6 for 910F, and... it wont boot.
Nice rom i will try
does it supports volte??
Look at the first post!
Enviado desde mi SM-G9350 mediante Tapatalk
werfewr3 said:
Hello, Can I have a question? What is special in C900F rom? Everyone here is trying to port the N7, N5, S7 Edge... and you, my favourite Rom developer come with this. I am waiting for discussion but it seems nobody testing it . So I think, I will do.
Do you think this Rom will work on N910F with your RamKernel same asi on 910G? Or there can be more issues? THANKS for the RamRoms BTW!! ))
EDIT: I tried to instal.. Did full wipe, instal rom, instal ramkernel V6 for 910F, and... it wont boot.
Click to expand...
Click to collapse
Installed and running great on my N910F just as it is.
Sent from my SM-G935F using XDA-Developers Legacy app
nice man.
any update?
hello can anyone update me if VOLTE works on this ROm by default
Have you tried reading the OP ?
Sent from my SM-G935F using XDA-Developers Legacy app
This thread is outdated, Oreo port will be uploaded to this other thread from now on.
Download link 7.11.18:
Mega
Baidu
Android One Nougat 7.12.19 is out but not ported. However, you can install it using my modded TWRP
https://forum.xda-developers.com/mi...rp-3-1-1-0-t3715084/post74745680#post74745680
How to install:
- Unlock bootloader
- Flash TWRP
- Wipe data, cache and dalvik
- Flash A1 Firmware
- Flash rom zip file
- Reboot
How to update
- Boot into TWRP
- Wipe cache and dalvik/art
- Flash rom zip file
- Reboot
Known issues:
- If you dont flash A1 firmware your fingerprint will acts as a button while unlocked.
- If you don't have Goodix fingerprint variant, fingerprint may not work.
- You tell me.
FAQ:
Q: Can I flash over August patch without wiping data?
A: Yes, you can. However WiFi may not work. If that's your case try restoring network settings. (Settings -> More -> Restore network settings). If WiFi still doesnt work, you'll need to wipe data.
Q: Can I update via OTA?
A: No, you can't. You'll need to wait until I port the update.
Q: Does this ROM come pre-rooted
A: No, it's the A1 stock rom which doesn't come rooted. If you want root, flash Magisk through TWRP
Q: Can I install Xposed?
A: Yes, you can. Just make sure you download xposed for SDK 25.
Q: Will this rom unlock 4G 800MHz band (B20)?
A: No, it won't unlock it. Mi A1 uses a different modem which supports it. Mi 5X modem doesn't.
Q: Do I need to unlock my bootloader?
A: Yes, you need to unlock the bootloader before you can install any custom ROM.
Q: How can I unlock my bootloader?
A: Apply for permissions on http://en.miui.com/unlock/ then download the tool and follow the steps.
Q: Where can I download TWRP?
A: You can download it from here
Donations:
If you like my work and want to contribute, you can donate via paypal.me/aex12
XDA:DevDB Information
Android One Port Nougat, ROM for the Xiaomi Mi 5X
Contributors
Aex12
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: Android One
Version Information
Status: Stable
Current Stable Version: 7.11.18
Stable Release Date: 2017-11-24
Created 2017-10-21
Last Updated 2018-03-07
Reserved
anyone know if it is possible to sideload the ota updates maybe??
---------- Post added at 03:30 PM ---------- Previous post was at 03:15 PM ----------
looks like it would be ok to dirty flash this hmm...
killswitx said:
anyone know if it is possible to sideload the ota updates maybe??
Click to expand...
Click to collapse
As stated on FAQs, you cant update via OTA, as this OTAs are made for an A/B device, and Mi 5X doesnt support A/B.
killswitx said:
looks like it would be ok to dirty flash this hmm...
Click to expand...
Click to collapse
It's OK if you come from another Android One port. Probably you will face some WiFi issues, to solve them read FAQs.
thanks
thanks but Are you sure you will let Android O run in this device??
adeljck said:
thanks but Are you sure you will let Android O run in this device??
Click to expand...
Click to collapse
I cant say it for sure. Will see when it's released for the A1 if it can be ported.
OMG! You're an angel!!
---------- Post added at 04:55 AM ---------- Previous post was at 04:48 AM ----------
@Aex12 is this rom pre-rooted?
I was waiting for this!! THANK YOU SO MUCH!!
Dirty flashed on this rom: http://en.miui.com/forum.php?mod=vi...997&page=15&extra=page=1&mobile=2#pid17831997
Everything working perfectly.
alekos panagulis said:
Dirty flashed on this rom: http://en.miui.com/forum.php?mod=vi...997&page=15&extra=page=1&mobile=2#pid17831997
Everything working perfectly.
Click to expand...
Click to collapse
Didn't you get any WiFi issues?
I got WiFi issues while updating from august to september. But not from september to october. Maybe updating from august to october dont cause any issue.
Aex12 said:
Didn't you get any WiFi issues?
I got WiFi issues while updating from august to september. But not from september to october. Maybe updating from august to october dont cause any issue.
Click to expand...
Click to collapse
No wifi issue.
@Aex12
Thank yoouuu! After waiting so long to unlock my bootloader I finally made it and flashed your rom right away. And it's working as a charm. I'm so happy I got rid of Miui 8 Chinese version and it's many bugs and problems (and occasional Chinese language notification I got no idea what it was saying). MiUi was cute and nice on a few parts, but it just seemed like an unfinished piece of software on many points (super aggressive ram management, brightness slider problem, crazily complex settings menu -especially the applications permissions one divided in three sections-).
This rom works just flawlessly for now, and I had no issue with the fingerprint reader acting as a button on my side. It's really great to see some functions works like fingerprint swipe for notifications or lock-screen notifications. Oh ! And I can finally make the google assistant and feed works out of the box without complex tweaks :laugh:
Camera is still ****ty though (especially coming from a nexus 5x) but, hey, it's a 200€ phone.
Do you have a paypal donate account so I can offer you a beer and encourage you to port the next android updates ?
As we all know all these 3 devices (Note 4x, MIA1 and MI5x) have the se chipsets
Is it possible to port it also on note 4x?
jonjon88 said:
@Aex12
Thank yoouuu! After waiting so long to unlock my bootloader I finally made it and flashed your rom right away. And it's working as a charm. I'm so happy I got rid of Miui 8 Chinese version and it's many bugs and problems (and occasional Chinese language notification I got no idea what it was saying). MiUi was cute and nice on a few parts, but it just seemed like an unfinished piece of software on many points (super aggressive ram management, brightness slider problem, crazily complex settings menu -especially the applications permissions one divided in three sections-).
This rom works just flawlessly for now, and I had no issue with the fingerprint reader acting as a button on my side. It's really great to see some functions works like fingerprint swipe for notifications or lock-screen notifications. Oh ! And I can finally make the google assistant and feed works out of the box without complex tweaks :laugh:
Camera is still ****ty though (especially coming from a nexus 5x) but, hey, it's a 200€ phone.
Do you have a paypal donate account so I can offer you a beer and encourage you to port the next android updates ?
Click to expand...
Click to collapse
You can make camera a little better by downloading the Google Camera modded with HDR+ and adding these two lines to build.prop:
Code:
persist.camera.HAL3.enabled=1
persist.camera.eis.enable=1
However, you will lose HDR support on native camera.
If you want to donate me you can do so on paypal.me/aex12
Thank you, donations are very appreciated!
rEsonancE_0404 said:
As we all know all these 3 devices (Note 4x, MIA1 and MI5x) have the se chipsets
Is it possible to port it also on note 4x?
Click to expand...
Click to collapse
Probably it can be done. Just ask a dev who have Note 4X to port it.
Aex12 said:
You can make camera a little better downloading the Google Camera modded with HDR+ and adding these two lines to the build.prop:
However, you will lose HDR support on native camera.
If you want to donate me you can do so on paypal.me/aex12
Thank you, donations are very appreciated!
Probably it can be done. Just ask a dev who have Note 4X to port it.
Click to expand...
Click to collapse
Edit: Can't PM you
Did you port the MIA1 rom.on 5x or did you build it on source?
I wonder what porting software did you use as android kitchen is not working on newer roms now
Edit2: do you have google+ or anything? To PM you?
After a few hours I noticed that unlocking with fingerprint has become very slow again. Something like 3 seconds.
alekos panagulis said:
After a few hours I noticed that unlocking with fingerprint has become very slow again. Something like 3 seconds.
Click to expand...
Click to collapse
The slow fingerprint sensor is an A1 related issue. Maybe it get improved in the future with updates.
rEsonancE_0404 said:
Edit: Can't PM you
Did you port the MIA1 rom.on 5x or did you build it on source?
I wonder what porting software did you use as android kitchen is not working on newer roms now
Edit2: do you have google+ or anything? To PM you?
Click to expand...
Click to collapse
I dont use any kind of AIO software. I use a bunch of linux tools and use them through CLI.
I use simg2img and make_ext4fs for the system.img and mkbootimg and unpackbootimg for the boot.img
Hello Aex12, I have no coding skills, so maybe my question is silly: it is possible to introduce in this rom the possibility to set different ringtone for each sim? Thank you.
Inviato dal mio Mi A1 utilizzando Tapatalk
alekos panagulis said:
Hello Aex12, I have no coding skills, so maybe my question is silly: it is possible to introduce in this rom the possibility to set different ringtone for each sim? Thank you.
Inviato dal mio Mi A1 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes, it would be possible. However this rom is intended to be an exact same copy of the Mi A1.
Aex12 said:
Yes, it would be possible. However this rom is intended to be an exact same copy of the Mi A1.
Click to expand...
Click to collapse
Oh wow! Please consider to introduce this feature, please!! You could make a copy of Mi A1 and one more rom with experimental features. You would be my hero.
Inviato dal mio Mi A1 utilizzando Tapatalk