i have a qnet delta with a spreadstrum port, i rooted it by kingroot and it goes ok, but when i install ifont my phone reboot and its in the bootloop state now. now my problem is i cant connect it in my PC. i have the latest driver for spreadstrum, i get it here. i cant flash my phones rom because it doesnt detect my phone. anyone can help me ?
Related
Hey guys,
So I wanted to try out the newest CM12 ROM with A5.0 but seems like it didnt exactly happen how I wanted it. Rooting the device and then installing the XZDualRecovery without a problem. Then downloaded the ROM and gapps.
I have SGP311 (pollux_windy) so I downloaded that version of the CM12 at first. It said that my device is pollux, which I ofc was dumb enough to just skip and download the pollux ver and then install that one. So I installed the pollux ver instead of pollux_windy and when I hit restart device I didnt see it boot again.
So I wanted to connect it to my PC, PC didnt recognize it ofc. Only way my PC regonizes my tab is by fastboot mode. I had to install a driver for that. And even then only the Sony Mobile Flasher by Androxyde recognised it. I run into bootloop various times before with my tab and Emma always fixed it but thats unfortunately not the case here as Emma doesnt recognise it either :/
So now here's the problem, I can only do fastboot mode (not flashmode) and the only program able to do sth with my device is this Sony Mobile Flasher. I downloaded a official FW there and wanted to install it but it required me to go into the flashmode which I can't.
Is there sth I can do? The only thing working is the LED and fastboot mode.
Is there a way to put the device into flashmode via PC, that would solve all issues or maybe a trick to go into flashmode? As there was some thread about it but the thing they did didnt work for me :/
Please help
Thanks in advance
Nevermind, I just forgot how to use Emma....
For anyone to whom this happens:
Computer: Open Emma from the Start menu of your computer.
Connect a USB cable to your computer.
Phone: Turn off your tab.
Connect your tab to the USB cable while holding the VOLUME DOWN.
Computer: Select the software you want to flash in the Service list. The tool automatically detects the tab and lists available software versions, which are called Services in this flash tool.
Click on Apply Service. The tab will now be flashed.
Phone: When you have flashed your device, you can disconnect your phone from the computer. The first time you start your device after you have flashed it, the boot-up might take a little longer than normal.
Ayow nigga .
The problem started when my system updates, after I click upgrade I've experience some effin errors . Then my Gionee m3 started to malfunction .
Help me this effin loop is so irritated . I already tried to flash stock rom , SP Flash, and I also download mediatek and some usb drivers . I think my main problem is SP flash tool cant recognize my device it wont charge either . Help me do you have some solution ?
i have the same problem my gionee m3.... i dont know other method to usb debuging my phone because it is only showing of android system recovery 3e when i use adb devices it not recognize it only shown as 0123456789abcdef sideload... in my searching it will change if i usb debugging enable... also sptools work on usb debugging i think
I have the same problem. I have installed two different sp flash tools, installed ADB drivers. my PC detects my phone and charging but having the option to open my files. I tried SP flash tools but wont detect my phone and will just charge.
PLease help.
Hi all,
I have a similar problem of bootloop after installing cm13 and gapps, it keeps rebooting back to twrp recovery. pls help.
my pc cannot detect my phone
i've already flash cwm a long time ago, after that i restore the official firmware using a pc at cyber cafe. then yesterday i tried to flash custom rom and my phone stuck at samsung grand logo. i've install samsung kies inside my laptop but it didnt detect my phone because it is my first time connecting my phone to my laptop. can someone help tell me how to make my laptp detect my phone. my phone can enter download mode but didnt detected by lptop.
Solution!
paluswitch said:
i've already flash cwm a long time ago, after that i restore the official firmware using a pc at cyber cafe. then yesterday i tried to flash custom rom and my phone stuck at samsung grand logo. i've install samsung kies inside my laptop but it didnt detect my phone because it is my first time connecting my phone to my laptop. can someone help tell me how to make my laptp detect my phone. my phone can enter download mode but didnt detected by lptop.
Click to expand...
Click to collapse
dear friend already tried to set up a stock deodex via recovery? it avoids using Odin and will be able to install the drivers on your laptop with your connected device!
:good:
paluswitch said:
i've already flash cwm a long time ago, after that i restore the official firmware using a pc at cyber cafe. then yesterday i tried to flash custom rom and my phone stuck at samsung grand logo. i've install samsung kies inside my laptop but it didnt detect my phone because it is my first time connecting my phone to my laptop. can someone help tell me how to make my laptp detect my phone. my phone can enter download mode but didnt detected by lptop.
Click to expand...
Click to collapse
Simply download driver for samsung gti8552 and install it on the computer/laptop in which you want to connect your device for modifications/fixing.
Here is the link for the driver---> CLICK HERE
Let me know for further assistance. Thanks
Just remove your phone battery ,sim etc . then wait for few seconds and boot to recovery or download mode by only battery not with sim and sd try if this works
This happened with me then solved by this method
akky26 said:
Simply download driver for samsung gti8552 and install it on the computer/laptop in which you want to connect your device for modifications/fixing.
Here is the link for the driver---> CLICK HERE
Let me know for further assistance. Thanks
Click to expand...
Click to collapse
Your link doesnt work. And after connecting whats next?
Stiffymeister said:
Your link doesnt work. And after connecting whats next?
Click to expand...
Click to collapse
After connecting select pda and put desired rom file. And start flying
Hello, guys.
Recently, I've tried to root a Cubot Power 4G following a guide I found online. I probably should have been more catious about it, cause now the phone is stuck on a bootloop. I tried to install a custom recovery to try and fix this, but as there was no official twrp for Cubot, I once again downloaded something that was probably shady. Thus, now the phone is stuck on bootloop, won't access recovery mode, is now turned off because battery gave out, but if I try to connect it to the pc, it will start to bootloop again. I cannot access adb, or at the least I don't know a way to, since it keeps bootlooping and I have no way to access a recovery mode(since there's no one, or at the least, if there is, it's faulty). What can I do here?
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
jwoegerbauer said:
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
Click to expand...
Click to collapse
I did! Or so I think... The moment I connect it to the pc, it starts bootlooping and so the pc cannot actually connect there
Bootloop is a situation where you cannot get into the "normal" Android system. Take note that as soon Android logo is shown on phone's display Android kernel got successfully initialized, ADB & Fastboot are ready.
I had a J6, just rooted months ago. Everything was fine, I got it rooted successfully, and today I just updated Magisk this afternoon and restart it. And it got bootloop.
I don't know what to do so I wipe data and cache partition. It didn't help
My phone can't connect to my laptop, Odin didn't detect my phone, Installing Samsung USB Drivers didn't help
My phone could only go to recovery mode and go to Downloading mode
Can anyone help me plz?
Try to reflash the stock rom maybe
Hello,
is your phone a SM-J600FN/DS? And how do you root?
Thanks
Efcegames said:
Try to reflash the stock rom maybe
Click to expand...
Click to collapse
To reflash the stock ROM we need Odin to detect my phone to flash. It didn't detect anything (despite already have Samsung USB Driver). I was stupid not installing TWRP before rooting my phone. What should I do now?
[SOLVED]: IT WAS THE CABLE PROBLEM​
It turns out that the problem all along was the cable. I had 2 Micro USB cables and none of them connect the phone to computer, only in charge mode
So I borrowed my mom's Xiaomi cable and it worked perfectly. Just connect to computer, open Odin and flash the stock ROM back.
After this incident I don't feel like I want to root phone. It was good but it seems to me that Magisk has a lot of problems right now... Or probably just me