Odin and rooting issues - Galaxy S6 Edge Q&A, Help & Troubleshooting

Hi
I have a Samsung Galaxy Edge SM-G950F, sim free, running 5.1.1
I decided to root using Odin
Ive used Odin many times to root several Samsung devices before so now how to use.
This time though i had issues, I used Odin 3.10 for the first time, normally use 3.09, and the AP was CF-Auto-Root-zerolte-zeroltexx-smg925f.tar
Every was fine until phone rebooted, Odin said success, but phone got stuck in boot. Couldnt go into recovery, only download mode.
After trying to flash in firmware again, no success, finally managed to get Smart Switch to reinstall firmware and reset device. Phew.
Now my questions are, was the problem Odin 3.10? Was Auto-Root wrong? Is it me?
Im obviously reluctant to try rooting again, is Odin 3.09 a more stable version and will work or whats the best way to root.
Thanks for any help

i'm not sure but i remember that cf auto root i'snt for 5.1.1, but only for 5.0.2

You Flash twrp recovery and root the device
Sent from my ONE A2001 using XDA Free mobile app

Related

Cannot root after Kies update

Hi All
I had rooted my phone a few days back using odin and cf-root. Today I got new updates from Kies. (android version is still 4.04) . Now the root was gone, so i tried to root again. But it started to fail all the time. I donwloaded latest ODIN V3.07 and CF-Root V6.4 and tried that. Now Odin says PASS but there is no su or cwmod and root checker says no root.
Is there anything obvious I am doing wrong?
Thanks so much for your help!
teekaytk said:
Hi All
I had rooted my phone a few days back using odin and cf-root. Today I got new updates from Kies. (android version is still 4.04) . Now the root was gone, so i tried to root again. But it started to fail all the time. I donwloaded latest ODIN V3.07 and CF-Root V6.4 and tried that. Now Odin says PASS but there is no su or cwmod and root checker says no root.
Is there anything obvious I am doing wrong?
Thanks so much for your help!
Click to expand...
Click to collapse
go back to your nandroid/cwm backup restore and see if its fixed, also if Kies worked you must be running stock firmware as updates not available to modified phones
dont tick auto reboot and after ODIN has done its thing, boot into recovery manually.
thanks all.
i finally rooted it using the s3 toolkit, with the recovery method. it said it worked on all devices and it certainly worked with mine

S2 stuck at boot screen

Currently stuck at the "Samsung Galaxy S II" logo during boot and it won't go past that. I can't seem to get into recovery mode, but I can access download mode.
I was using Shostock v3.0.2 (latest) and the Jeboo 1.3b Kernel.
SuperSU had an update and I accidentally pressed "twrp/cwm" instead of "normal" which made my phone reboot and has been stuck at the Samsung logo at boot up since then. When going into download mode, it shows that the current binary is "Samsung Official".
Would I have to use Kies to restore the phone back to factory or is there any other workarounds to get it to work again?
Thanks in advance!
You don't have to use Kies, but since it won't boot into recovery, you will have to load stock firmware. Your options are Kies if it will restore the phone, or, since you can get into download mode, flash the stock firmware with Odin.
If it were me, I would flash 4.0.4 UCLL6 plus root from the development forum using Odin3 v1.85, and then install Mobile Odin lite or Mobile Odin pro, and flash one of the custom kernels that are linked in the OP of that thread. Then you can load and flash SHOstock 3.0.2 again if you want.
creepyncrawly said:
You don't have to use Kies, but since it won't boot into recovery, you will have to load stock firmware. Your options are Kies if it will restore the phone, or, since you can get into download mode, flash the stock firmware with Odin.
If it were me, I would flash 4.0.4 UCLL6 plus root from the development forum using Odin3 v1.85, and then install Mobile Odin lite or Mobile Odin pro, and flash one of the custom kernels that are linked in the OP of that thread. Then you can load and flash SHOstock 3.0.2 again if you want.
Click to expand...
Click to collapse
Alright I will try out your recommendation and let you guys know how it turns out. Thanks for the quick reply. :good:
Alright I was able to flash back to stock 4.0.4 using your thread/guide. Will flash a custom kernel now.
Back to SHOstock again!
I had the same thing happen to me today.
I had to clear the cache on the phone and factory reset it after installing the 4.0.4 UCLL6 from creepyncrawly's sig.
It took 5 minutes or so after I did that of it sitting at the AT&T logo before the phone came up.
It sucked.

Sprint Note 3 root problems HELP PLease

i rooted my devce using cwm(n9005-cwm-recovery-6.0.4.7-kk(0125)) and gained super su access.
tried to put new rom on went through the process of backing up which i dont thinhk worked, and wiping the sustem
tried to put on new rom using cwm and got an error on startup
so i tried to go back and start the whole process over again
using odin i tried to flash the phone and FAIL
i am stuck in a loop everytime i start normal or start in cwm i get a message saying firmware upgrade encountered an issue. please select recovery mode in kies and try again
but i can still use ODIN
What can i do
Thanks
I'd use TWRP if I were you and save yourself some headaches. From my understanding, CWM is hit or miss on our beloved Note 3.
https://dl.twrp.me/hltespr/twrp-2.8.6.1-hltespr-4.4.img.tar.html
Sent from my SM-N900P using XDA Free mobile app
Shotty2015 said:
i rooted my devce using cwm(n9005-cwm-recovery-6.0.4.7-kk(0125)) and gained super su access.
tried to put new rom on went through the process of backing up which i dont thinhk worked, and wiping the sustem
tried to put on new rom using cwm and got an error on startup
so i tried to go back and start the whole process over again
using odin i tried to flash the phone and FAIL
i am stuck in a loop everytime i start normal or start in cwm i get a message saying firmware upgrade encountered an issue. please select recovery mode in kies and try again
but i can still use ODIN
What can i do
Thanks
Click to expand...
Click to collapse
First what version of KK where you on when you rooted your device ? Anyway pull battery then reinstall battery. Boot into download mode, then odin flash the version of KK you had before you rooted your phone.
Chances are the device won't boot. DON'T PANIC !!! Happenes all the time, just pull the battery again. Boot into download mode again, and odin flash the stock KK again it should boot the second time.
Once you get it to boot up, check and see what version of KK you are running and make the kernel , modem, and bootloader are the same.
At this point l would odin flash it again to make sure you have a clean install. Now you can root and install a custom recovery. I use TWRP.
IF you have any questions just click rom flashing basics in my signature.
Pull battery boot cold to download mode. From there attempt odin flash of factory tar image. Report back please.
Sent from my 0x1 Note 3...... I love tep
i was originally using the stock 5.0 lollipop i rooted using the method on galaxynote3root. tried re flashing but got a fail again i dont know if im using the right kernel
odin OC5 tar.
odin cfautoroot.
odin twrp.
done. easy peasy.
WOOOP WOOOOOOOP.
It worked. it took 10 tries, but it finally worked
now to root is this the right cfautoroot
CF-Root: 48 514 333
CF-Auto-Root: 29 510 246
This file: 106 225
i just dont want to mess it up again
thanks so much guys
every things good rooted and twrp installed.
Thanks again guys

Samsung Galaxy S3 Flashing with Odin

Hi I have one samsung Galaxy S3 which is stuck on Boot Screen. I tried to flash it but odin shows fail. I tried pit file same. Is there any way to fix it. I have Z3X also with me
@arjun_anil, in the worst case your internal memory is gone. So before threwing away, try firmware again: download your firmware, drivers, Odin from sammobile.com and follow exactly instructions, given there. If Odin finishs with failed again, post the log.
I tried to flash efs file and this is what I got
This is what I got from odin flashing efs file
Boot screen huh? Sounds like is missing/corrupted is files. Have you tried recovery an factory wipe? Also if you can connect to Odin, then you could reflash. But first your gunna need to know a few things about this brick here. Like the android version, carrier, an kernel version. So you can download an flash the proper files. I'm guessing your on a Verizon phone and or you didn't install Samsung drivers to help Odin's successful flashing chances. If you don't know your phones info, you can find out in recovery an Odin modes on the phone if accessible.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app

Canadian S6 Edge soft brick PLS HELP, very detailed explanation of what I've done

I started the night by downloading a rooted kernel for the phone and installed that using ODIN. All good.
Next I installed a TWRP recovery image using the flashify application from the app store. That works and were still good.
Then I had to flash a "modem" and "bootloader" for marshmallow (note I do not really understand what these were for, i was trying to follow a guide).
This is where it went screwy, after flashing these 2 files for my specific device through ODIN, it would not boot.
Im not sure but likely to make things worse, I attempted flashing a new TWRP recovery version because i belived it would work with the modem and bootloader.
Ive now tried flashing the stock firmware using ODIN but i get a FAIL message. Please please help, i only just got the phone and i feel hopeless.
semb37 said:
I started the night by downloading a rooted kernel for the phone and installed that using ODIN. All good.
Next I installed a TWRP recovery image using the flashify application from the app store. That works and were still good.
Then I had to flash a "modem" and "bootloader" for marshmallow (note I do not really understand what these were for, i was trying to follow a guide).
This is where it went screwy, after flashing these 2 files for my specific device through ODIN, it would not boot.
Im not sure but likely to make things worse, I attempted flashing a new TWRP recovery version because i belived it would work with the modem and bootloader.
Ive now tried flashing the stock firmware using ODIN but i get a FAIL message. Please please help, i only just got the phone and i feel hopeless.
Click to expand...
Click to collapse
Can you tell me at which point in odin do you get the error? When 9n the log in odin do you get error?
Eg: hidden.img FAIL
semb37 said:
I started the night by downloading a rooted kernel for the phone and installed that using ODIN. All good.
Next I installed a TWRP recovery image using the flashify application from the app store. That works and were still good.
Then I had to flash a "modem" and "bootloader" for marshmallow (note I do not really understand what these were for, i was trying to follow a guide).
This is where it went screwy, after flashing these 2 files for my specific device through ODIN, it would not boot.
Im not sure but likely to make things worse, I attempted flashing a new TWRP recovery version because i belived it would work with the modem and bootloader.
Ive now tried flashing the stock firmware using ODIN but i get a FAIL message. Please please help, i only just got the phone and i feel hopeless.
Click to expand...
Click to collapse
use samsung smart switch to restore ur device to factory settings
it will fix ur phone back to normal
If smart switch doesnt work download your stock firmware from sammobile (make sure its the correct variant. Also were your updating from 5.0 to 6.0?

Categories

Resources