dell venue 7 black screen - Dell Venue

hi! i have a Dell Venue 7 3740 LTE it can't connect to wi-fi and i try to restart it and when i turn it on after the dell logo, the screen just turn black but it has a sign of power 'cause i can see the backlight from screen are on. i already tried many times to turn it on and off its still the same. and when i try to connect in to my pc it can't connect.. please help how to fix it.. and pardon my english

Try to connect your tablet to another pc and flash image from another pc...Before trying on another pc install android adb drivers on pc...

[ EUAN ] said:
hi! i have a Dell Venue 7 3740 LTE it can't connect to wi-fi and i try to restart it and when i turn it on after the dell logo, the screen just turn black but it has a sign of power 'cause i can see the backlight from screen are on. i already tried many times to turn it on and off its still the same. and when i try to connect in to my pc it can't connect.. please help how to fix it.. and pardon my english
Click to expand...
Click to collapse
I too have the same problem. followed OSS_A195.pdf and flashed A195 lte rom to my device. After FW+OS complete the tablet is not booting into fastboot mode instead its just showing blank screen. please help me ! Thanks in advance..

Related

[Q] Help with usb problem.

Yesterday i downgrade from froyo 2.2 to 2.1 on my galaxy vibrant using odis, everything went ok, but when I try to connect again whit my computer the phone keeps turning off, even if I only connect to the charger the phone keeps turning off, can anyone help me?
odin back again ? can phone boot up to download ?
I try 3 times, my phone still boot on download mode, the problem is when I connected to my charger or my pc, the phones turn off? I´m afraid to ran out of battery
any one can help?

[Q] x10 mini not booting

Hi,
I flashed phone from cyanongen v15
After installation was complete i rebooted.
Device was vibrating and boot screen was displayed.
The device wont upload the phone and is stuck in a boot loop.
After a few tries in boot loop the display is freezing and nothing happens.
While rebooting (Manually), i discovered i cant run Xrecovery and
i am not getting any thing other then sony ericsson first screen
now i cant seem to find a solution. i would much appreciate any help at all!!
mikulgohil said:
Hi,
I flashed phone from cyanongen v15
After installation was complete i rebooted.
Device was vibrating and boot screen was displayed.
The device wont upload the phone and is stuck in a boot loop.
After a few tries in boot loop the display is freezing and nothing happens.
While rebooting (Manually), i discovered i cant run Xrecovery and
i am not getting any thing other then sony ericsson first screen
now i cant seem to find a solution. i would much appreciate any help at all!!
Click to expand...
Click to collapse
Flash your phone with SEUS (Download Sony Ericsson Update Service) from sonyericsson.com and then re-install root+recovery and try another =)
still not working
hi,
i tryed to do but
see the attachment it is telling to drag the status bar and click on mount
i have connected with USB , SEPC show it is detected it show the error attached
but my phone don't reach to UI level it is stucked at "Sony ericsson" screen in booting
mikulgohil said:
hi,
i tryed to do but
see the attachment it is telling to drag the status bar and click on mount
i have connected with USB , SEPC show it is detected it show the error attached
but my phone don't reach to UI level it is stucked at "Sony ericsson" screen in booting
Click to expand...
Click to collapse
I think from what I have found on the forum and google that seus (i knw this stands for sony e update service but it dosnt seem to be the same as SE pc companion and thats whats in your screen shot. So may be thats why you cant use it. I cant find this seus any were to download on the net.
Sent from my U20i using xda premium
try this:
start seus on pc
connect phone and pc with usb cable
press both middle and right buttons at the same time and press the power button
when phone goes down, keep pressing only the right button
thanks
Thanks both my phone is working fine now
the thing was that i was unknown with REPAIR like will it show when i fail to connect to USB
once again thanks a lot

[Q] Help my honor 3 is stuck at startup screen

Could someone please help me, I am getting desperate: I rooted my phone and tried to flash it with (I think) a new recovery, after which the phone only starts up with a Huawei Ascend logo and then freezes (with the logo still in screen). Powering off only works by removing the battery. And starting up with volume up or volume down doesn't matter.
I have tried the instructions at http://www.needrom.com/mobile/huawei-honor-3/ and http://forum.xda-developers.com/wiki/Huawei_HN3-U01 but without succes.
I think it is impossible to fix because my computer doesn't give a response at all when I connect the phone via USB, I have tried it at another pc as well, but with the same result.
PLEASE HELP ME!!!

[Q] Hard Bricked WT19i

Can anyone help me out?
Yesterday I kept my phone for charging all night (which i always do). In the morning i unplugged the device and it was powered off, which was weird. It pressed the power button but the screen remained blank. Even the led notifications not working.
I connected my phone to pc and it says QHSUSB_DLOAD No drivers found.,,,
I again connect it and i get a message saying Zeus Flash Device Installed.
Please Help as i cant even get into flash/fast boot mode.
someone please help !
Please if someone know about the QHSUSB_DLOAD mode, plz help...
guide me please.:crying:
After connecting my phone, in the device manager, i see a zeus flash device.
any help ??
could someone just help me out ???

No charging LED / No Boot after official PLK-L01_C432B380 Update

Hello Everybody! First of all sorry for my bad englisch.... I have a Honor 7 with TWRP 2.8.7.0 5.0-6.0 EN. It had the factory Firmware with EMUI 3.1 Now I ´ve searched in my Honor 7 update Program for new firmware and it found the PLK-L01_C432B380. After downloading it I´ve clicked on install. The phone has shut down and the TWRP has opened. Than it installed a couple of files and without any success Message the Phone turns off. Now I can´t turn it on. Not in Fastboot mode and not in Recovery Mode. I´ve i try to connect it to the PC or try to charge it the charging LED don´t work. Only if I press the Power Button for more than 10 seconds a short vibration comes but nothing happens. I have any changes to get the phone on? The Battery is fully loaded.
Thanks Guys
gremlin1987306 said:
Hello Everybody! First of all sorry for my bad englisch.... I have a Honor 7 with TWRP 2.8.7.0 5.0-6.0 EN. It had the factory Firmware with EMUI 3.1 Now I ´ve searched in my Honor 7 update Program for new firmware and it found the PLK-L01_C432B380. After downloading it I´ve clicked on install. The phone has shut down and the TWRP has opened. Than it installed a couple of files and without any success Message the Phone turns off. Now I can´t turn it on. Not in Fastboot mode and not in Recovery Mode. I´ve i try to connect it to the PC or try to charge it the charging LED don´t work. Only if I press the Power Button for more than 10 seconds a short vibration comes but nothing happens. I have any changes to get the phone on? The Battery is fully loaded.
Thanks Guys
Click to expand...
Click to collapse
Im in the same boat, and as far as i can get is to Hope for servicecenter replacement... Og did u get it to Work again?
HonorCasper said:
Im in the same boat, and as far as i can get is to Hope for servicecenter replacement... Og did u get it to Work again?
Click to expand...
Click to collapse
Hello Casper! Unfortunately I found no way to run the Phone. I´ve send it to Honor and got it back after only two days!! They changed the main board. Now everything works.
gremlin1987306 said:
Hello Everybody! First of all sorry for my bad englisch.... I have a Honor 7 with TWRP 2.8.7.0 5.0-6.0 EN. It had the factory Firmware with EMUI 3.1 Now I ´ve searched in my Honor 7 update Program for new firmware and it found the PLK-L01_C432B380. After downloading it I´ve clicked on install. The phone has shut down and the TWRP has opened. Than it installed a couple of files and without any success Message the Phone turns off. Now I can´t turn it on. Not in Fastboot mode and not in Recovery Mode. I´ve i try to connect it to the PC or try to charge it the charging LED don´t work. Only if I press the Power Button for more than 10 seconds a short vibration comes but nothing happens. I have any changes to get the phone on? The Battery is fully loaded.
Thanks Guys
Click to expand...
Click to collapse
just remember DO NOT install emui updates in twrp , never do that.. emui updates should be installed when you are not using twrp..
I endes Up sending mine to the store where i bought it and they changed the Main curciuit board..

Categories

Resources