Related
Hi, I have bricked RAZR.
After flashing new system_signed with CMD, recovery works, now I need to apply update Blur_Version.651.167.26.XT910.Retail.en.EU.zip but error apears:
http://www.fotosik.pl/pokaz_obrazek/b09373c9b1ac9dc6.html
I need file with MD5:
cd 65 e8 27 08 93 84 fb 7d 7f e1 15 8e 5e 0a b3
Size: 372,78 MB (390.891.376 Bytes)
Can anyone help me?
borda01 said:
Hi, I have bricked RAZR.
After flashing new system_signed with CMD, recovery works, now I need to apply update Blur_Version.651.167.26.XT910.Retail.en.EU.zip but error apears:
http://www.fotosik.pl/pokaz_obrazek/b09373c9b1ac9dc6.html
I need file with MD5:
cd 65 e8 27 08 93 84 fb 7d 7f e1 15 8e 5e 0a b3
Size: 372,78 MB (390.891.376 Bytes)
Can anyone help me?
Click to expand...
Click to collapse
Firmware available, install by RSD Lite http://forum.xda-developers.com/showthread.php?t=1850683
Regards
Thread Closed
Solved
I have bricked RAZR. Please help me. What Can I do?
Hello all,
My device
I have a Rikomagic MK 802 IIIS mini PC with the following specs:
Model MK802 IIIS 8GB Dual Core
CPU RK3066 Dual Core - Cortex-A9 Up to 1.6GHz
GPU Quad- Core 2D/ 3D/ OpenGL ES2.0(AMD Z430)/ OpenVG1
OS Android 4.1
RAM 1GB DDR3
Memory 8GB Flash
Expansion Micro SD T-Flash(Maximum support 32GB)
Video Format WMV/ASF/MP4/3GP/3G2M4V/AVI/MJPEG/RV10/DivX/VC-1/MPEG-2/MPEG-4/H.263/H.264/1280*720P HD 30 fps, 1080P/720*480 D1 30fps
Audio Format MP3/WMA/APE/FLAC/AAC/OGG/AC3/WAV
Picture format Max.8000x8000 JPEG BMP GIF PNG
WiFi 802.11 b/g/n
Flash Supports flash 11.1
HDMI(male),Micro SD slot, USB host*1,USB OTG*1, USB power port; LED(Blue)
My primary problem (long story short): I managed to brick the MK802 IIS device in the process of installing Pi****u Linux on it. After trying to install the Linux kernel on the recovery partition manually, by doing from Android cmdline "busybox dd if=ug802recovkernel.img of=/dev/block/mtd/by-name/recovery bs=8192" and then "su" and "reboot recovery", I ended up with a non-booting system. I tried several times power off + power on cycles, but Android is not loading anymore. So, I would like to reflash the factory firmware on my device, to have the Android 4.1 booting again ... and I know about RKAndroidTool v1.35 for Windowses, but ...
... I am not using Windows OSes (better said, I avoid using them as much as I can, by trying to find *nix based solutions).
Therefore my main question: Is there Linux software to restore factory firmware on a Rikomagic MK802 IIIS device?
During my research, after googling for "rkandroidtool for linux" I found this promising link on our XDA community: http://forum.xda-developers.com/showthread.php?t=1286305
This "rkflashtool for Linux and rk2808, rk2818 and rk2918 based tablets" is reported to work fine by many, and later on in the above thread, user "frankjt" says:
there are good news, updated with ProductID 0x300a like this:
. . .
if (!(h = libusb_open_device_with_vid_pid(c, 0x2207, 0x300a)))
. . .
rkflashtool works on Cube's rk3066 tablets too (all functions: r, w, b).
Thanks to Ivop's excellent tool my Cube U30GT-H (firmware 1.02) is rooted now.
Click to expand...
Click to collapse
So, it seems this rkflashtool for Linux does a great job on rk3066 tablets, but is it working on mini PCs too?
Has anyone tried this tool on miniPC ? Preferably Rikomagic MK802 IIIS, but if you have experience on similar models, please share them here.
Is there a guide on how to reflash miniPCs with Linux software only? Please post it.
What are the hexadecimal addresses to be used when attempting to write an .img file on the Rikomagic MK802 IIIS mini PC?
Any advice, or feedback on these questions are very welcomed!
Regards.
Hi,
Doing a little bump of this thread.
After doing more google research, this time for "rk3066 flash tool linux" I've found:
armtvtech dot com and the rest of the link is: /armtvtechforum/viewtopic.php?f=66&t=350
slatedroid dot com and the rest of the link is: /topic/42826-flashing-rk3066-with-linux/
So definetly I'm not a singular case in my frustrations.
It seems that recommandations point to the rkflashtool that I mentioned in my previous post:
arctablet dot com and the rest of the link is: /wiki/index.php/Update_tablet_using_Linux (see the "Preparation" section)
Now the main question that remains: Anyone tested (successfully or not) Linux rkflashtool on a Rikomagic MK 802 IIIS mini PC?
Or, to put it simpler: Anyone tested Linux rkflashtool on any RK3xxx based android stick computer (aka mini PC) ?
If yes, please post your stories here.
PS: Sorry for the cryptic weblinks syntax, but I am still a new member, not allowed to post these ..
PSS(off-topic): Sorry for giving Pic Untu a "bad name" in the opening post, it wasn't my intention
Never mind, I was thinking of a different device.
Sent from my One X using xda app-developers app
---------- Post added at 08:49 PM ---------- Previous post was at 08:37 PM ----------
This person reports success with rkflashtool on an mk808: http://www.slatedroid.com/topic/460...08-from-linux/page__view__findpost__p__631970
ragesoss said:
Never mind, I was thinking of a different device.
Sent from my One X using xda app-developers app
---------- Post added at 08:49 PM ---------- Previous post was at 08:37 PM ----------
This person reports success with rkflashtool on an mk808: slatedroid com /topic/46001-writing-images-to-the-mk808-from-linux/page__view__findpost__p__631970
Click to expand...
Click to collapse
Thanks a lot, ragesoss!
I read the tutorial and the feedback, looks very promising!!
I'll test it myself on my MK802 IIIS and post the results here.
Very frustrating: seems that rkflashtool restore isn't working on Rikomagic MK802IIIS
First of all, the explanation for why I bricked my Rikomagic MK802 IIIS: when trying to install Pic Untu, I did that dd command on the recovery partition (see the first post in this thread for the exact command). Well, the procedure is not working like this because when accessing the mtdblock devices with normal *nix commands (dd, cat), the mtdblock Android driver is not handling I/O as usual and it causes data corruption on all the mtd device. That's why I bricked the device.
So, not having a backup before, I had to use a WindowsXP vmware VM with windows RK flashing utility. I restored the device to firmware "Rikomagic MK802IIIS 4GB, 8GB Recovery Software (20130121)" downloaded from rikomagic.co.uk.
Restoring was successfull so here I am with a fully functional Android which boots up OK. All fine for a day...
I decided to make a full device backup using Linux rkflashtool which I downloaded from the thread I mentioned in my first post (http://forum.xda-developers.com/showthread.php?t=1286305), this is the link: http://forum.xda-developers.com/attachment.php?attachmentid=785592&d=1321547155
I modified the source so that the rk3066 chipset is recognized (I added the 2207 usb vendor id).
The OS/computer I've used: Kubuntu 12.04 LTS 64 bit on a Thinkpad T420:
Code:
[email protected]:~# uname -a
Linux awesome 3.2.0-49-generic #75-Ubuntu SMP Tue Jun 18 17:39:32 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
Now follows the copy/paste of commands & output of the backup operation, with the mention that: of course I put the device in flashing mode first, using paperclip + power-on cable in device's OTG connector linked to laptop :
Code:
[email protected]:~# ./rkflashtool r 0x00000000 0x01000000 > /mnt/media/mk802iiis_android_backup_20130706.bin
[email protected]:~# du /mnt/media/mk802iiis_android_backup_20130706.bin
8388608 /mnt/media/mk802iiis_android_backup_20130706.bin
[email protected]:~# du -h /mnt/media/mk802iiis_android_backup_20130706.bin
8.0G /mnt/media/mk802iiis_android_backup_20130706.bin
[email protected]:~#
[email protected]:~# hexdump -C /mnt/media/mk802iiis_android_backup_20130706.bin |head -10
00000000 50 41 52 4d 5b 02 00 00 46 49 52 4d 57 41 52 45 |PARM[...FIRMWARE|
00000010 5f 56 45 52 3a 34 2e 30 2e 34 0d 0a 4d 41 43 48 |_VER:4.0.4..MACH|
00000020 49 4e 45 5f 4d 4f 44 45 4c 3a 72 6b 33 30 73 64 |INE_MODEL:rk30sd|
00000030 6b 0d 0a 4d 41 43 48 49 4e 45 5f 49 44 3a 30 30 |k..MACHINE_ID:00|
00000040 37 0d 0a 4d 41 4e 55 46 41 43 54 55 52 45 52 3a |7..MANUFACTURER:|
00000050 52 4b 33 30 53 44 4b 0d 0a 4d 41 47 49 43 3a 20 |RK30SDK..MAGIC: |
00000060 30 78 35 30 34 31 35 32 34 42 0d 0a 41 54 41 47 |0x5041524B..ATAG|
00000070 3a 20 30 78 36 30 30 30 30 38 30 30 0d 0a 4d 41 |: 0x60000800..MA|
00000080 43 48 49 4e 45 3a 20 33 30 36 36 0d 0a 43 48 45 |CHINE: 3066..CHE|
00000090 43 4b 5f 4d 41 53 4b 3a 20 30 78 38 30 0d 0a 4b |CK_MASK: 0x80..K|
As you can see, the resulted backup file has 8 GB size, and the hexdump of it shows the usual stuff for a non-corrupted backup.
Note1: I avoided to "spam" the thread with the whole header of the hexdumped backup file, but I assure you that it has the boot command line with the size/offset of all the partitions. So, it is a backup successfully created.
Note2: The backup operation took about 25-30 minutes, no errors in the system logs.
After backup was done, Android still boots OK, all is fine. Until the nightmare came...
I decided to test the restore process, so I added the device once more in flashing mode (with paperclip & OTG), and did:
Code:
[email protected]:~/rk3066-rkflashtool/rk3066-rkflashtool-master/trunk# ./rkflashtool e 0x00000000 0x01000000
rkflashtool: info: interface claimed
rkflashtool: info: erasing flash memory at offset 0x00ffff00
[email protected]:~# ./rkflashtool w 0x00000000 0x01000000 < /mnt/media/mk802iiis_android_backup_20130706.bin
...
...
...
rkflashtool: info: writing flash memory at offset 0x00fffe80
rkflashtool: info: writing flash memory at offset 0x00fffea0
rkflashtool: info: writing flash memory at offset 0x00fffec0
rkflashtool: info: writing flash memory at offset 0x00fffee0
rkflashtool: info: writing flash memory at offset 0x00ffff00
rkflashtool: info: writing flash memory at offset 0x00ffff20
rkflashtool: info: writing flash memory at offset 0x00ffff40
rkflashtool: info: writing flash memory at offset 0x00ffff60
rkflashtool: info: writing flash memory at offset 0x00ffff80
rkflashtool: info: writing flash memory at offset 0x00ffffa0
rkflashtool: info: writing flash memory at offset 0x00ffffc0
rkflashtool: info: writing flash memory at offset 0x00ffffe0
Note1: Writing operation took 2 hours and 8 minutes, no errors in the system logs..
Note2: ... but it was the end of my working mk802iiis !
When I reconnected the device, Android won't boot, instead the device seems to enter the flashing mode again. I say it "seems" because I am not really sure, actually it should not even attempt to enter flashing mode because I'm not touching the little oriffice with the paperclip.
So that's it on short: Android does not start!
When I specifically manually entered flashing mode again, I tried to read several megabytes from near the start addresses of the flash memory. Unfortunately, I get garbage:
Code:
[email protected]:~# hexdump -C recoverytry.bin |head -10
00000000 ae e6 ff a7 75 26 3e 6f ee b7 d3 66 33 f7 e7 fa |....u&>o...f3...|
00000010 97 b4 e6 fe bf da 10 4e 70 b6 a7 d9 db 9f 3b b7 |.......Np.....;.|
00000020 6b 3d f6 7f fe ff bf 5e e1 af ef 3e ff df 93 f7 |k=.....^...>....|
00000030 d7 ee 3f ef 31 d2 cb cc ef eb db f7 f7 ff 7f e7 |..?.1...........|
00000040 cf 6d 96 e9 dd a5 d6 9f f7 11 67 ef 6d dc dd fd |.m........g.m...|
00000050 5e 4b f3 77 7d fd bd cd 9f 15 f9 17 83 fb f7 5b |^K.w}..........[|
00000060 b9 11 fd 61 b4 cd dd 93 b9 f7 de d7 f8 d1 9b ef |...a............|
00000070 76 fe bf 1f 67 77 f5 5f 67 e2 97 96 15 f7 ae 7f |v...gw._g.......|
00000080 e4 ce 7d e5 36 fb fe 56 ce e6 fb ca f3 f7 d0 37 |..}.6..V.......7|
00000090 3d af 49 cd d5 71 ff f9 33 db fe 34 f6 17 d3 1d |=.I..q..3..4....|
Compare the output above with the first 10 lines of my backup file posted earlier and you can understand what I mean by garbage.
So to resume:
1) I managed to create a correct backup of mk802iiis using rkflashtool ("rkflashtool r" worked as expected)
2) Rkflashtool failed to restore the backup ("rkflashtool w" doesn't work, at least not for restoring all 8 GB).
Does anyone experienced similar situations?
Is 8 GB too much to backup at once?
Is there some workaround for this?
Could be a PC problem or device problem?
Is 2 hours too long(or too short) for flashing 8 GB to NAND?
Please help.
Regards,
Lexminriko
An important omission from my previous post (my apologies for not realizing the importance of the following):
Using Linux rkflashtool on my Kubuntu 12.04 64bit I was able to successfully backup /restore partitions.
For example, I could restore recovery partition with the command:
Code:
./rkflashtool w 0x000010000 0x000008000 < /mnt/media/mk802iiis_original_recovery_part_20130706.bin
The "brickeage" occured only when I tried to restore all NAND in one step, with the command already mentioned in my previous post:
Code:
./rkflashtool w 0x00000000 0x01000000 < /mnt/media/mk802iiis_android_backup_20130706.bin
Main questions remain:
Anyone experienced similar situations on Rikomagic MK802 IIIS ?
Is there a way to fix this bricked device in Linux(with rkflashtool or other Linux software), given the command that caused the damage?
If you experienced similar troubles, please post.
Regards,
Lexminriko
lexminriko said:
Hello all,
My device
I have a Rikomagic MK 802 IIIS mini PC with the following specs:
Model MK802 IIIS 8GB Dual Core
CPU RK3066 Dual Core - Cortex-A9 Up to 1.6GHz
GPU Quad- Core 2D/ 3D/ OpenGL ES2.0(AMD Z430)/ OpenVG1
OS Android 4.1
RAM 1GB DDR3
Memory 8GB Flash
Expansion Micro SD T-Flash(Maximum support 32GB)
Video Format WMV/ASF/MP4/3GP/3G2M4V/AVI/MJPEG/RV10/DivX/VC-1/MPEG-2/MPEG-4/H.263/H.264/1280*720P HD 30 fps, 1080P/720*480 D1 30fps
Audio Format MP3/WMA/APE/FLAC/AAC/OGG/AC3/WAV
Picture format Max.8000x8000 JPEG BMP GIF PNG
WiFi 802.11 b/g/n
Flash Supports flash 11.1
HDMI(male),Micro SD slot, USB host*1,USB OTG*1, USB power port; LED(Blue)
My primary problem (long story short): I managed to brick the MK802 IIS device in the process of installing Pi****u Linux on it. After trying to install the Linux kernel on the recovery partition manually, by doing from Android cmdline "busybox dd if=ug802recovkernel.img of=/dev/block/mtd/by-name/recovery bs=8192" and then "su" and "reboot recovery", I ended up with a non-booting system. I tried several times power off + power on cycles, but Android is not loading anymore. So, I would like to reflash the factory firmware on my device, to have the Android 4.1 booting again ... and I know about RKAndroidTool v1.35 for Windowses, but ...
... I am not using Windows OSes (better said, I avoid using them as much as I can, by trying to find *nix based solutions).
Therefore my main question: Is there Linux software to restore factory firmware on a Rikomagic MK802 IIIS device?
During my research, after googling for "rkandroidtool for linux" I found this promising link on our XDA community: http://forum.xda-developers.com/showthread.php?t=1286305
This "rkflashtool for Linux and rk2808, rk2818 and rk2918 based tablets" is reported to work fine by many, and later on in the above thread, user "frankjt" says:
So, it seems this rkflashtool for Linux does a great job on rk3066 tablets, but is it working on mini PCs too?
Has anyone tried this tool on miniPC ? Preferably Rikomagic MK802 IIIS, but if you have experience on similar models, please share them here.
Is there a guide on how to reflash miniPCs with Linux software only? Please post it.
What are the hexadecimal addresses to be used when attempting to write an .img file on the Rikomagic MK802 IIIS mini PC?
Any advice, or feedback on these questions are very welcomed!
Regards.
Click to expand...
Click to collapse
You can use the official Linux tool called 'upgrade_tool' ... simply do a google search for 'linux upgrade_tool' and you'll get a several sites with guides and useful info about it.
anyone have the rom that compatibility with my china tablet model Alps MD706 with cpu MTK MT6577 dual core 1,2ghz with ram 512mb. MY current rom have sleep death bugs.
spec sheet at the attachment
amir5569 said:
anyone have the rom that compatibility with my china tablet model Alps MD706 with cpu MTK MT6577 dual core 1,2ghz with ram 512mb. MY current rom have sleep death bugs.
spec sheet at the attachment
Click to expand...
Click to collapse
Hi i have a very similiar tablet, in the build.prop says that is an ALPS MD706, but mine has 1.0 ghz procesor.
Are you interested?:good:
need stock room
fanáticomaniático said:
Hi i have a very similiar tablet, in the build.prop says that is an ALPS MD706, but mine has 1.0 ghz procesor.
Are you interested?:good:
Click to expand...
Click to collapse
Hi,
My china tablet (momo9 3g) bootloop as I installed unicode font apk which not compatibility with this tablet. I need your help to get stock firmware from other source. Then I can flash with livesuit. I tried to download this stock rom, but no luck all link are dead. from My tablet detail was follow:
Android version: REL 4.2.2
onandroid script version: -1.0
Device: md706 alps alps MID
Contents of: /proc/partitions
major minor #blocks name
7 0 1254 loop0
7 1 8348 loop1
7 2 43691 loop2
7 3 15624 loop3
7 4 49928 loop4
7 5 13545 loop5
7 6 39533 loop6
7 7 19782 loop7
179 0 7613440 mmcblk0
179 1 1 mmcblk0p1
179 2 5120 mmcblk0p2
179 3 786432 mmcblk0p3
179 4 524288 mmcblk0p4
179 5 1048576 mmcblk0p5
179 6 5217376 mmcblk0p6
179 64 4096 mmcblk0boot1
179 32 4096 mmcblk0boot0
179 96 994816 mmcblk1
179 97 994691 mmcblk1p1
254 0 8347 dm-0
254 1 43690 dm-1
254 2 15624 dm-2
254 3 49927 dm-3
254 4 13545 dm-4
254 5 39532 dm-5
254 6 19782 dm-6
7 8 2111 loop8
254 7 2110 dm-7
7 9 3150 loop9
254 8 3150 dm-8
7 10 43691 loop10
254 9 43690 dm-9
7 11 31217 loop11
254 10 31216 dm-10
7 12 36414 loop12
254 11 36414 dm-11
7 13 3150 loop13
254 12 3150 dm-12
Actually My friend has same model and similar tablet. Also has root access (root with rootmaster). But we don't known how to get img from his tablet. Anyway to get img from this tablet? In working tablet we install nanoid backup online apk and tried to backup nanoid. But not support for md706 model. Also tried rom manager, titanium backup pro and my backup pro, but cannot backup img.
We had read "CWM Recovery 6.0.1.2 for Allwinner A10 LY-F1/TREQ Tablets" but not dare to try. Cos some device got bootloop.
Pls share your stock rom.
sorry for my english.
I have momo93g with stock 4.1.2 jb. If i can help, i will. I am also interested in custom recovery, rom or kernel with overclock.
amir5569 said:
anyone have the rom that compatibility with my china tablet model Alps MD706 with cpu MTK MT6577 dual core 1,2ghz with ram 512mb. MY current rom have sleep death bugs.
spec sheet at the attachment
Click to expand...
Click to collapse
hello i have a smartpad mp720m mediacom is the Italian version of your tablet but according to some research I did on the internet appears to be identical to the md706 of Chinese production.
I think you can find help at this link
http://www.mediacomeurope.it/Supporto/Dettaglio.aspx?XRI=2129#googtrans(it|en)
---------- Post added at 08:53 AM ---------- Previous post was at 08:37 AM ----------
I have a question for you ... can you tell me if the mac address of your wi-fi card changes every time you activate the connection and turn it off? My tablet ...... has this problem and I do not understand what's causing it.
When active the wi fi I get a mac I can see in the status menu, after I turned off and on the wi fi and update status I can see a new mac with the last 3 pairs of different numbers.
This new mac I can see it in my router in the list of connected users.
You can check if you have the same problem on your models?
thank you!
fanáticomaniático said:
Hi i have a very similiar tablet, in the build.prop says that is an ALPS MD706, but mine has 1.0 ghz procesor.
Are you interested?:good:
Click to expand...
Click to collapse
Hi,i will be very glad if you can send this ROM to me, because i crashed mine
Hi,i will be very glad if you can send this ROM to me, because i crashed mine.my mail is [email protected]
ALPS MD706, 1.0 ghz procesor.
I need ROM (CM, AOKP, Stock) for NTT MD706 (link for firmware). Help! Please!
ROM for:
MD706B H V2 (4G + 512M + 1.0GHz Dual SIM)
download the official kdz V20A p715
kitkat 4.4
download:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW908706432109876543213/V20A_00.kdz
http://lg-phone-firmware.com/index.php?id_mod=21
Finally!!
I cannot find the download link. Can you link it please?
Can anyone upload it to an other mirror?
http://lg-phone-firmware.com/index.php?id_
mod=21
use chrome or PC. stop the page from loading before it loads the ads.
What of this .kdz is 4.4?
39 CLR/CLARO(BRAZIL) V10A LGP714 709.09 MiB 473 Online
40 CLR/CLARO(BRAZIL) V10A LGP714 691.42 MiB 536 Online
41 BOI/OI (BRAZIL) V10A LGP716 667.66 MiB 265 Online
42 BTM/TIM(BRAZIL) V10A LGP716 728.61 MiB 515 Online
43 BRA/BRAZIL V10A LGP716 667.57 MiB 1731 Online
44 BTM/TIM(BRAZIL) V10A LGP716 701.42 MiB 502 Online
45 BTM/TIM(BRAZIL) V10A LGP716 728.61 MiB 239 Online
46 BOI/OI (BRAZIL) V10A LGP716 673.87 MiB 138 Online
47 BRA/BRAZIL V10B LGP716 673.78 MiB 760 Online
48 BRA/BRAZIL V10C LGP714 685.37 MiB 1104 Online
49 BRA/BRAZIL V10C LGP716 673.85 MiB 730 Online
50 BRA/BRAZIL V10D LGP714 691.93 MiB 772 Online
51 BRA/BRAZIL V10E LGP714 703.01 MiB 422 Online
52 BRA/BRAZIL V10F LGP714 703.11 MiB 851 Online
VictorCesarM said:
What of this .kdz is 4.4?
39 CLR/CLARO(BRAZIL) V10A LGP714 709.09 MiB 473 Online
40 CLR/CLARO(BRAZIL) V10A LGP714 691.42 MiB 536 Online
41 BOI/OI (BRAZIL) V10A LGP716 667.66 MiB 265 Online
42 BTM/TIM(BRAZIL) V10A LGP716 728.61 MiB 515 Online
43 BRA/BRAZIL V10A LGP716 667.57 MiB 1731 Online
44 BTM/TIM(BRAZIL) V10A LGP716 701.42 MiB 502 Online
45 BTM/TIM(BRAZIL) V10A LGP716 728.61 MiB 239 Online
46 BOI/OI (BRAZIL) V10A LGP716 673.87 MiB 138 Online
47 BRA/BRAZIL V10B LGP716 673.78 MiB 760 Online
48 BRA/BRAZIL V10C LGP714 685.37 MiB 1104 Online
49 BRA/BRAZIL V10C LGP716 673.85 MiB 730 Online
50 BRA/BRAZIL V10D LGP714 691.93 MiB 772 Online
51 BRA/BRAZIL V10E LGP714 703.01 MiB 422 Online
52 BRA/BRAZIL V10F LGP714 703.11 MiB 851 Online
Click to expand...
Click to collapse
kindly mirror the link for us. my download just failed and won't restart.
its this one:
42 BTM/TIM(BRAZIL) V10A LGP716 728.61 MiB 515 Online
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW225995432109876543213/V10A_05.kdz
ositandroid said:
kindly mirror the link for us. my download just failed and won't restart.
its this one:
42 BTM/TIM(BRAZIL) V10A LGP716 728.61 MiB 515 Online
Click to expand...
Click to collapse
Thank you very much
VictorCesarM said:
Thank you very much
Click to expand...
Click to collapse
Method of loading the native KDZ firmware for
your device: http: //csmg.lgmobile.c...el_
check2.jsp? = ESN IMEI , where instead of IMEI,
enter the 15-digit IMEI of your device
Link appears to be down
thenotonly said:
Link appears to be down
Click to expand...
Click to collapse
/\ This.
Can someone mirror it?
Thanks in advance
Sent from my LG-P716
---------- Post added at 10:45 PM ---------- Previous post was at 09:51 PM ----------
Anyone?
I'm waiting this since I heard they were going to update it in July
Sent from my LG-P716
I was trying in the last 2 hours but couldnt reach the file...
shiftyHungary said:
I was trying in the last 2 hours but couldnt reach the file...
Click to expand...
Click to collapse
I think only osit,the OP,got it,now we can only wait and see if he will re-up
Also,when a new link/way to get it is found,could someone do a tutorial on how to use the kdz file to install the system update?
KWG V2 said:
I think only osit,the OP,got it,now we can only wait and see if he will re-up
Also,when a new link/way to get it is found,could someone do a tutorial on how to use the kdz file to install the system update?
Click to expand...
Click to collapse
sadly my download has failed and won't restart. I'm searching for another link... sorry for the delay.
note would be a good time to get a Brazilian imei
ositandroid said:
sadly my download has failed and won't restart. I'm searching for another link... sorry for the delay.
note would be a good time to get a Brazilian imei
Click to expand...
Click to collapse
I'm Brazilian so I guess I won't have problem with that
However I did a Google Search on the update and I found out there isn't kdz mirror anywhere.
Is this real? I'm checking my system update and it says that I'm on the latest version of android. But I'm still on 4.1.2
Sent from my LG-P716 using XDA Free mobile app
OP said it was KitKat,if the Software Updater app doesn't have any update on the KitKat and LG put the download link down it's probably because the update was accidentaly leaked l.
KWG V2 said:
OP said it was KitKat,if the Software Updater app doesn't have any update on the KitKat and LG put the download link down it's probably because the update was accidentaly leaked l.
Click to expand...
Click to collapse
The file is hosted on the official LG servers. It ain't leaked.
AngryGamer025 said:
The file is hosted on the official LG servers. It ain't leaked.
Click to expand...
Click to collapse
can we get a senior dev to help us mirror the link. it's been down on my side since the download stopped.
I heard the download has been available since 1st of September.
https://translate.googleusercontent...itkat/&usg=ALkJrhjpExK5ExJkOHDsNw2Kk2THK3l_Lw
Click to expand...
Click to collapse
After reading this site in the native language,Portuguese,I noticed that you have to register on Brazilian LG Site to get the update,that won't be a problem for me,but I think the rest of the world won't be receiving the update,If I manage to get the update in 3 days I will extract the kdz for you guys.
it must be fake ... send me ur screenshot to prove that its kitkat update
Hello to everyone, my englisch is not the best one, i'm sry for that
I have Bricked device here. 64gb MTK with china Mobile branding.
It's unlocked, rooted, twrp recovery.
It worked fine with root. But than i wanted to flash new Rom (xiaomi.eu_multi_HMNote4_7.1.19_v8-6.0.zip) from TWRP. Unfortanerly it's broke after 2 sec than reboot. The system startet normaly! Next day, I wanted to try it again. But i could not start the twrp rec. The device did start any more! Bootloop i see only the mi logo in the middle of Display after 30-60 sec reboot.
So recovery do not work. Fastboot work pretty fine.
I tried already pretty much.
I flashed almost all available Fastboot Roms with few different methods Smart Phone Flash*Tool & Miflash. With original cust.img and with modified one.
Almost every time the flash was successful in normal time (miflash
420 sec & smart phone flash tool about 200sec) still Bootloop.
Thanks for help greets
start in fastboot mode and flash new twrp
Code:
fastboot flash recovery TWRP.img
after if this sucessfull start recovery from fastboot
Code:
fastboot boot TWRP.img
Try to wipe all partitions and sideload your rom file.
headshotde said:
start in fastboot mode and flash new twrp
Code:
fastboot flash recovery TWRP.img
after if this sucessfull start recovery from fastboot
Code:
fastboot boot TWRP.img
Try to wipe all partitions and sideload your rom file.
Click to expand...
Click to collapse
I forgot, i flashed already few different recoveries.
Twrp 3.0.2 from cofface
Twrp 3.0.2-x from zcx
Stock recovery
Flash successful.
I start the device with power and vol +
The same story like with rom, Bootloop
okay try following
Boot in to Recovery via Fastboot boot twrp.img
now start adb shell in TWRP
and do following command # cat /proc/partitions
and post the result my Redmi Note 4 look like this...
Code:
~ # cat /proc/partitions
major minor #blocks name
179 0 61071360 mmcblk0
179 1 16384 mmcblk0p1
179 2 512 mmcblk0p2
179 3 10240 mmcblk0p3
179 4 8192 mmcblk0p4
179 5 32768 mmcblk0p5
179 6 32768 mmcblk0p6
179 7 8192 mmcblk0p7
179 8 13792 mmcblk0p8
179 9 8192 mmcblk0p9
179 10 2048 mmcblk0p10
179 11 3072 mmcblk0p11
179 12 24576 mmcblk0p12
179 13 4096 mmcblk0p13
179 14 3072 mmcblk0p14
179 15 5120 mmcblk0p15
179 16 1024 mmcblk0p16
179 17 1024 mmcblk0p17
179 18 5120 mmcblk0p18
179 19 4096 mmcblk0p19
179 20 4096 mmcblk0p20
179 21 16384 mmcblk0p21
179 22 8192 mmcblk0p22
179 23 5120 mmcblk0p23
179 24 5120 mmcblk0p24
179 25 8192 mmcblk0p25
179 26 530432 mmcblk0p26
179 27 3145728 mmcblk0p27
179 28 442368 mmcblk0p28
179 29 56660975 mmcblk0p29
179 30 44032 mmcblk0p30
179 31 16384 mmcblk0p31
179 96 4096 mmcblk0rpmb
179 64 4096 mmcblk0boot1
179 32 4096 mmcblk0boot0
179 128 62367744 mmcblk1
179 129 62366720 mmcblk1p1
253 0 56660975 dm-0
~ # [6n
Unfortunately i can't boot into recovery, when I type
fastboot boot twrp.img happen nothing (i still see the fastboot logo on screen) after about 40 sec. Device reboot - - - > Bootloop
Gesendet von meinem HUAWEI MT7-L09 mit Tapatalk
make sure your twrp.img is inside the folder of adb
Gesendet von meinem Redmi Note 4 mit Tapatalk
Certainly is the twrp.img in adb folder.
On the PC screen i see that the recovery flash und boot was successful!
Sent from my HUAWEI MT7-L09 using Tapatalk
So i did it my redmi booted!!
The solution, remove battery tab for about 10 minutes. I read it @ 4pda Russian forum, Thanks for your help!
Sent from my HUAWEI MT7-L09 using Tapatalk
Daniel_Tregubov said:
So i did it my redmi booted!!
The solution, remove battery tab for about 10 minutes. I read it @ 4pda Russian forum, Thanks for your help!
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
i have the same problem as you,can u provide me more in detail plz
WickeGusLD said:
i have the same problem as you,can u provide me more in detail plz
Click to expand...
Click to collapse
Dear MasBro,
i got the same problem with my Redmi note 4 MTK, and here the solution :
* Open your caseback ReNo 4, for the information the screwdriver is 0.8. you can see the video in youtube. and becareful with the speaker on bottom of your phone
* after u open the caseback, unplug the conector battery from you handphone ( i dont know how long it need, but i unplug the battery for 1 hours )
* after that, plug back the connector and put it back the caseback ( dont turn on the handphone ).
* fastboot full rom using SP Tools, and enjoy you Redmi note 4 MTK back to normal.
Note:
- in some case the IMEI your will be missing, you can restore using "maui meta". for how to use that u can searching in google
- this is the last way u can do for u ReNo
- Do It By U Own Risk
- sorry, my languange a little bad.
JoninBlue said:
Dear MasBro,
i got the same problem with my Redmi note 4 MTK, and here the solution :
* Open your caseback ReNo 4, for the information the screwdriver is 0.8. you can see the video in youtube. and becareful with the speaker on bottom of your phone
* after u open the caseback, unplug the conector battery from you handphone ( i dont know how long it need, but i unplug the battery for 1 hours )
* after that, plug back the connector and put it back the caseback ( dont turn on the handphone ).
* fastboot full rom using SP Tools, and enjoy you Redmi note 4 MTK back to normal.
Note:
- in some case the IMEI your will be missing, you can restore using "maui meta". for how to use that u can searching in google
- this is the last way u can do for u ReNo
- Do It By U Own Risk
- sorry, my languange a little bad.
Click to expand...
Click to collapse
I have sent my phone back to xiaomi already,now it's fix.
Ps.for those people have this problem and u don't want to take risk .wipe my bootloader so that the warranty is true then sent it to xiaomi.
Anyway,thx bro,appreciate your help.