My mobile model name is GT-I9100G
And s/N number is
S/N: RF1CC2BAQVA
I need the original PDA for my phone so that I can repair it with odin.my phone shows "firmware upgrade encountered an essu......." so that I can't see my pda version from my device.just tell me someone that what is my PDA version I have downloaded some version but it's not working.please help me someone as soon as possible.
Sent from my SM-A500G using XDA Forums
Here are the version numbers (country specific) for your PDA.
Thanks Bro I new it but in this which is the right PDA for my device???I have downloaded Indian Vietnam Bangladesh version but they failed so I need the original one.
Sent from my SM-A500G using XDA Free mobile app
Help me Bro plz
Sent from my SM-A500G using XDA Free mobile app
Sorry, didn't get a notification. You have to quote me so I get a notification that you replied.
It depends on where you bought your smartphone.
Related
Can some help me i need all 4files pit,pda,etc.
Where i can find them i search alot
Plz help and thanx
For my friend phone GT-I9100G
:'(
Sent from my GT-I9100G using xda premium
Did u already check sammobile?
http://www.sammobile.com/firmware/?page=3
Choose all the infos in drop down boxes at bottom of page. (Smartphone/Android/GT-i9100G/or country)
CHEERS
Sent from my GT-I9100 using xda premium
it's not help .
on sam you upgread just but on pda
But when dead screen all system is deleted so i need to install new one not just pda.
On odin i need to chose all the files pit,pda,csc,kernal,modem.
So i need every file alone but offical samsung firmware
Sent from my GT-I9100G using xda premium
bigheart90 said:
it's not help .
on sam you upgread just but on pda
But when dead screen all system is deleted so i need to install new one not just pda.
On odin i need to chose all the files pit,pda,csc,kernal,modem.
So i need every file alone but offical samsung firmware
That's not correct. Its related to firmware release if it's one or three parted!
So u have to look for example on size an u also get three parted firmwares from there.
CHEERS
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Sorry I today recognized that my written text wasn't shown.
So I wanted to tell u that it's not correct what u said.
Because it's firmware related if it's only one or three parted.
So just search a bit and maybe choose the bigger size ones, which maybe are more the 3-parted...
Much success.
CHEERS
Sent from my GT-I9100 using xda premium
Flash with odin stock firmware - iemi ok
Flash with cyanomod - iemi lost
Any reasons for this? and the solution?
Flash rc4. Imei is not lost, just hidden. There is no problem with imei in rc4.
Sent from my GT-S5830i using xda app-developers app
cheers I downloaded 3. 4 works fine.
But play store just brings up an error "...could not be download due to an error"
For the Play Store, i had no luck too, will try to reflash the rom asap.
Sent from my GT-S5830i using xda app-developers app
Guys, check the rom's dev thread, someone had posted a very efficient method which worked for me
I have already fixed it by reflashing the rom.
Sent from my GT-S5830i using xda app-developers app
hi evry body
i have the same pb imei lost
and a another pb my phone dont accept the incoming calls he say thay my number is busy
can you help me plz
omasa2006 said:
hi evry body
i have the same pb imei lost
and a another pb my phone dont accept the incoming calls he say thay my number is busy
can you help me plz
Click to expand...
Click to collapse
Buddy i had answer you in one of the thread but don't post your problem in thread make a new one
Sent from my Ace-i
Hi Guys,
Need some help finding stock firmware 4.3 or 4.2 for Samsung Galaxy S3 International version Baseband version is I9300XXEMC2(Region: India). Currently i am rooted & running supernexus rom 4.4.2 KitKat version. I planning to sell it, so i need to get back to stock firmware. Please need your assistance in this:crying:
Thanks,
Ravi
This topic has been covered plenty of times, search before asking a question that has already been answered 100's of times.
Once again for stock firmwares search sammobile.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Need stock firmware for GT-I9300XXEMC2
samorgs said:
This topic has been covered plenty of times, search before asking a question that has already been answered 100's of times.
Once again for stock firmwares search sammobile.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi samorgs,
I've searched, but not getting this firmware I9300XXEMC2 for 4.3 version. If i flash a different version there is possibility of bricking it right? Sorry for this noobish question, i'm new to this.
Regards,
Ravi.
You can flash pretty much any version of the firmware but it must be for the GT I9300 only. Not any other variation like the I9305 or the ones that are made for the the startes. Like Verizon or AT n T most likely you will brick your and phone.
Ravi this is the link to the XDA page. http://forum.xda-developers.com/showthread.php?t=2323847
I strongly suggest you read this and Google search the way to unroot it.
This is an application on the play store that takes you directly to Sam mobile that gives you all the official firmware. India is linked under two id INU & INS. I have the file it I'd 800 mb so so watch out of your using your mobile data plan.
Hope this helps Best of luck.
Sent from my GT-I9300 using XDA Free mobile app
Sent from my GT-I9300 using XDA Free mobile app
Need stock firmware for GT-I9300XXEMC2
Rudy83 said:
You can flash pretty much any version of the firmware but it must be for the GT I9300 only. Not any other variation like the I9305 or the ones that are made for the the startes. Like Verizon or AT n T most likely you will brick your and phone.
Ravi this is the link to the XDA page. http://forum.xda-developers.com/showthread.php?t=2323847
I strongly suggest you read this and Google search the way to unroot it.
This is an application on the play store that takes you directly to Sam mobile that gives you all the official firmware. India is linked under two id INU & INS. I have the file it I'd 800 mb so so watch out of your using your mobile data plan.
Hope this helps Best of luck.
Sent from my GT-I9300 using XDA Free mobile app
Hi Rudy83
Thanks a ton for the information. That helped me a lot.
Cheers,:good:
Ravi
Click to expand...
Click to collapse
Sorry.. I forgot give you the name and link for the application. It is called Android firmware.
https://play.google.com/store/apps/details?id=com.andromo.dev67301.app260405
Here you go
Sent from my GT-I9300 using XDA Free mobile app
ravik453 said:
Rudy83 said:
You can flash pretty much any version of the firmware but it must be for the GT I9300 only. Not any other variation like the I9305 or the ones that are made for the the startes. Like Verizon or AT n T most likely you will brick your and phone.
Ravi this is the link to the XDA page. http://forum.xda-developers.com/showthread.php?t=2323847
I strongly suggest you read this and Google search the way to unroot it.
This is an application on the play store that takes you directly to Sam mobile that gives you all the official firmware. India is linked under two id INU & INS. I have the file it I'd 800 mb so so watch out of your using your mobile data plan.
Hope this helps Best of luck.
Sent from my GT-I9300 using XDA Free mobile app
Hi Rudy83,
I'm currently stuck in Samsung boot logo. does not go into recovery. what is the solution for this.
Regards,
Ravi.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
How did you brick it. Did you turn on debugging mode. Turn of all anti virus.
Here smoother guide. I strongly suggest you read more now. Also watch videos. Please check the firmware you downloaded. Are you absolutely sure it was for the GT I9300.
PLEASE CHECK THIS FORUM OUT THREAD
http://forum.xda-developers.com/showthread.php?t=2187081
http://forum.xda-developers.com/showthread.php?t=1911726
http://galaxys3root.com/
Please read up more. And I suggest you now head to the galaxy s3 section and see what you may have v done yo soft brick your phone
I hope this helps
Sent from my GT-I9300 using XDA Free mobile app
Need stock firmware for GT-I9300XXEMC2
Rudy83 said:
How did you brick it. Did you turn on debugging mode. Turn of all anti virus.
Here smoother guide. I strongly suggest you read more now. Also watch videos. Please check the firmware you downloaded. Are you absolutely sure it was for the GT I9300.
PLEASE CHECK THIS FORUM OUT THREAD
http://forum.xda-developers.com/showthread.php?t=2187081
http://forum.xda-developers.com/showthread.php?t=1911726
http://galaxys3root.com/
Please read up more. And I suggest you now head to the galaxy s3 section and see what you may have v done yo soft brick your phone
I hope this helps
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Hi Rudy83,
It is resolved now. I downloaded One click Odin, then did a master clearhttp://forum.xda-developers.com/showthread.php?t=731989. This procedure took around 30 mins. While this was progressing nothing was showing in the progress window, so waited for 30 mins & then unplugged the USB, then the progress bar started to fill up & then the message reflected RESET successfull! Then flashed the zip which is found in http://forum.xda-developers.com/showthread.php?t=2639746 & then reflashed the firmware. It solved the problem. Status in the phone settings shows NORMAL not as MODIFIED.
Not sure how it happened but it happened. Thanks for your help.
Regards,
Ravi.
hey thats great to hear that you were able yto resolve it.
:good:
I have omate developer edition 1/8/2100 with firmware 20131219. Today I tried to flash a new firmware using SP tool as mentioned in your guide. I think that an error wad occur. Then, my watch is dead and not going to power on again. I tried to remove the battery but I think that the bolts is also stucked. I dont have any backup or recovery. I don't know what can I do???!!! I am really very upset from omate. No one reply on my emails, no one can help me... can any one here have a method to help me!!! Please, I am really need your help all
Sent from my GT-I9502 using XDA Free mobile app
Why no body reply???? Where the experts
Sent from my GT-I9502 using XDA Free mobile app
don't worry dude. I was in your situation last week . search the forum .there's a good tutorial. But use windows xp or 7.I had real problem with win8.1 and mtk driver .
Sent from my HUAWEI MT1-U06 using Tapatalk
So, help me please my friend.. what firmware I use and what I do?
Sent from my GT-I9502 using XDA Free mobile app
I success
Sent from my GT-I9502 using XDA Free mobile app
elsabea said:
I success
Sent from my GT-I9502 using XDA Free mobile app
Click to expand...
Click to collapse
How did you solve it?
Can you copy /paste the link to the thread / information you used to fix your watch?
I get the firmware backup for omate 1/8/2100 # 20140328 (this one can be update to latest via OTA) and flash it using SP Tool like the tutorial in the forum and then start the watch and then get the latest update via OTA.
The link for the firmware I used here:
Omate_1-8_2100_TrueSmart_20140328.zip
https://mega.co.nz/#!DMFDBDZb!XSmnHewqH7lF47_chkf8Oirlgy9LFuBSy8mq7tFkynY
Sent from my SM-P605 using XDA Premium HD app
-Android Freak- said:
How did you solve it?
Can you copy /paste the link to the thread / information you used to fix your watch?
Click to expand...
Click to collapse
Dear friend,
maybe I have the same problem with a 512/4 2100MHz TS. What have I to do to reanimate the watch and what for an firmware I have to use?
Where do I get the firmware?
mazi_v said:
don't worry dude. I was in your situation last week . search the forum .there's a good tutorial. But use windows xp or 7.I had real problem with win8.1 and mtk driver .
Sent from my HUAWEI MT1-U06 using Tapatalk
Click to expand...
Click to collapse
How did you solved your problem, I have the same problas as you but with a 512/4. may you help me?
It can be downloaded from sammobile.com .
It is for China version, no Hong Kong for now.
Is it possibile to flash with odin CU rom in HU based phone?
Nobody... @balikbayan we can not try on HU? Can you tell me please what is different there, just to learn something?
Sent from my SM-A9000 using XDA-Developers mobile app
I tried updating to CU from HU and the phone wouldn't boot. I think it may be kernel related issue.
Sent from my SM-A9000 using XDA-Developers mobile app
XdividerX said:
I tried updating to CU from HU and the phone wouldn't boot. I think it may be kernel related issue.
Sent from my SM-A9000 using XDA-Developers mobile app
Click to expand...
Click to collapse
You should also flash the PIT file also.
I flash to Hong Kong version from China version because of less of Google. Of course in 5.1 only.
Can you give full info, thanks.
Sent from my SM-T810 using XDA-Developers mobile app
ivanox1972 said:
Can you give full info, thanks.
Sent from my SM-T810 using XDA-Developers mobile app
Click to expand...
Click to collapse
See this post
http://forum.xda-developers.com/showpost.php?p=66019321&postcount=20
Note that the PIT file is inside the CSC file, you need to extract by yourself. Then put all to the Odin folder. In Odin pick the PIT, AP, BL, CSC, CP