Nand Write Start? I can´t flash stock rom - Galaxy S6 Edge Q&A, Help & Troubleshooting

I had this problem with ODIN 3.10.6
Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925IDVU2COF8_G925IODD2COF8_G925IDVU2COF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I want to update my firmware to Lollipop 5.1.1, I have Lollipop 5.0.2 and my carrier is WIND MOBILE (Canada).
I´ve used the Indian stock rom from sammmobile and I´ve tried with other pc, other port usb, other cable and always is the same problem. What can I do? Please help me. Thanks.

Is the phone still locked?? Is the same csc that you're trying to flash??

marcochapita said:
Is the phone still locked?? Is the same csc that you're trying to flash??
Click to expand...
Click to collapse
No, I´m using Stock rom from India and my stock rom is from Canada, so, is not the same CSC. And are you talking about that my phone is locked to others companies? If is that, the reply is YES, still locked.

jonmagia said:
No, I´m using Stock rom from India and my stock rom is from Canada, so, is not the same CSC. And are you talking about that my phone is locked to others companies? If is that, the reply is YES, still locked.
Click to expand...
Click to collapse
if you are using a ROM form a different country, it could be built for a different Variant.
Try a Canadian Stock 5.1.1 ROM.
Word of warning, you cannot Downgrade from 5.1.1 to 5.0.2

Mischala said:
if you are using a ROM form a different country, it could be built for a different Variant.
Try a Canadian Stock 5.1.1 ROM.
Word of warning, you cannot Downgrade from 5.1.1 to 5.0.2
Click to expand...
Click to collapse
Yeah, the problem is: We haven´t Lollipop 5.1.1 in Canada yet.

Odin stuck in NAND Write
I m also having same problem Odin stuck in NAND Write.
I have used odin 3.10.6 and 3.10.7 that too on 2 PCs and also tried rebooting PC but nothing worked.
I tried flashing Original FW as well as Upgrade ie 5.1.1. but result is still Fail in NAND write. Smart switch says G9250 doesn't support initialisation
Plz help
My phone is SM-G9250, CSC-TGY.

This might sound crazy but I had the same problem and I had a defective new Samsung USB cable!
I spent hours trying to flash stock firmware!
Only when I used another cable Odin 3.10.6 passed first time!

Solution!
Try to wipe everything on your phone via CUSTOM RECOVERY, DONT WIPE YOUR SDCARD!!! (do not touch the odin settings unless you exactly know what they do!)
Try TWRP:
TWRP: twrp.me/Devices/
This will most likely work because then it will clean flash/install your rom.

jonmagia said:
No, I´m using Stock rom from India and my stock rom is from Canada, so, is not the same CSC. And are you talking about that my phone is locked to others companies? If is that, the reply is YES, still locked.
Click to expand...
Click to collapse
If you have the phone locked, i think that you can't flash anything unless you unlock the bl. Try to flash the stock rom with a oldest version of ODIN (ex 3.07/3.00 or oldest...)

Related

[Q] Samsung Galaxy Not Booting/Stuck on 'Firmware upgrae encountered an issue'

Hi, currently having problems with S3 GT-I9300. I am stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' Cannot do anything with phone atm. I have tried kies to carry it emergency recovery but that fails everytime it gets to 4%. I have also tried to flash a stock rom using Odin but that again says FAIL in red. Any help would be great! thanks
ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
John90uk said:
Hi, currently having problems with S3 GT-I9300. I am stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' Cannot do anything with phone atm. I have tried kies to carry it emergency recovery but that fails everytime it gets to 4%. I have also tried to flash a stock rom using Odin but that again says FAIL in red. Any help would be great! thanks
ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try to enter download mode and again flash the rom. You said "I also tried flashing STOCK rom", what were you flashing before? I just encountered this error today and flashed again after entering download mode and the error went away.
haiderijaz said:
Try to enter download mode and again flash the rom. You said "I also tried flashing STOCK rom", what were you flashing before? I just encountered this error today and flashed again after entering download mode and the error went away.
Click to expand...
Click to collapse
i have tried this on many occasions but i still receive the same errors in odin and kies. have also tried different ports ad pc's. how do i find the correct firmware for my phone?
You do not say what you where doing/ flashing in the first instance .
Kies must be off if using Odin .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
JJEgan said:
You do not say what you where doing/ flashing in the first instance .
Kies must be off if using Odin .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
Click to expand...
Click to collapse
The problem started when i plugged my phone on charge, when i unplugged it the phone turned off and continued to restart after samsung logo screen. I then tried kies to upgrade and initiliase but when that reached 4% it would say an error occured. This happens constantly. I then closed kies and tried flashing a Stock rom with ODIN but it keeps saying FAIL in red.
Also afrer kies recovery it now says firmware upgrade encountered an error.
John90uk said:
i have tried this on many occasions but i still receive the same errors in odin and kies. have also tried different ports ad pc's. how do i find the correct firmware for my phone?
Click to expand...
Click to collapse
I am unable to understand how you are using Kies and Odin at the same time. You need to go to sammobile.com and find your country there.
haiderijaz said:
I am unable to understand how you are using Kies and Odin at the same time. You need to go to sammobile.com and find your country there.
Click to expand...
Click to collapse
I am not using both softwares at the same time. Its a GT-I9300.
John90uk said:
I am not using both softwares at the same time. Its a GT-I9300.
Click to expand...
Click to collapse
First of all, Please try and make sure you can enter recovery mode. From what I understand, your phone is soft bricked. Also you mentioned the model. To download the appropriate firmware you need the country.
IF you can enter recovery mode, things are okay. We can then try rooting your phone with and flashing a custom rom. If that works, stock rom can be flashed back later. But first of all please try entering recovering mode by pressing Volume Up, Home and Power Button. When you see the samsung boot logo, let go and if you get some options that means you are in recovery.
haiderijaz said:
First of all, Please try and make sure you can enter recovery mode. From what I understand, your phone is soft bricked. Also you mentioned the model. To download the appropriate firmware you need the country.
IF you can enter recovery mode, things are okay. We can then try rooting your phone with and flashing a custom rom. If that works, stock rom can be flashed back later. But first of all please try entering recovering mode by pressing Volume Up, Home and Power Button. When you see the samsung boot logo, let go and if you get some options that means you are in recovery.
Click to expand...
Click to collapse
I can only get into download mode. When i try entering recovery mode i get a screen which says firmware upgrade encountered an error an issue. Where do i go from here?
Product code in download mode if blank its SDS .
JJEgan said:
Product code in download mode if blank its SDS .
Click to expand...
Click to collapse
Odin mode
product name: GT-I9300
Custom Binary download: No
current binary: samsung official
System status: custom
John90uk said:
Odin mode
product name: GT-I9300
Custom Binary download: No
current binary: samsung official
System status: custom
Click to expand...
Click to collapse
First of all pls find out which country your samsung is bought from. Europe? usa? Which firmware did you flash with ODIN? Where did you get it from?
May be we can try and root your phone.
haiderijaz said:
First of all pls find out which country your samsung is bought from. Europe? usa? Which firmware did you flash with ODIN? Where did you get it from?
May be we can try and root your phone.
Click to expand...
Click to collapse
It was from the UK. And i have tried to flash a T-mobile Uk firmware as it was on t-mobile. Thanks guys
Recovery mode and rooting are irrelevant to your issue. Try flashing the rescue firmware from the general forum, if that fails then you'll probably need a new motherboard.
Sent from my GT-I9300 using Tapatalk

[Q] How to flash back to stock for warranty? Odin doesn't work (error)

Yo Guys! I think my bootloader was already updated, and I tried to flash back to original 4.3 or 4.1.2, but nothing of it worked.
When I try to flash f.e. the
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMR2_I9300VFREMA3_I9300BUEMA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me I was on CM 10.2/CM11 and wanted to restore factory images, because my Audio Plug-In didnt work properly anymore and my screen had some pixel errors.
I tried to flash a CWM touch recovery, but that did work only once - then flashed the bootloader downgrade Restore_Bootloader_XXBLFB.zip, but
I still couldnt flash any factory firmware
I also tried this here:
http://forum.xda-developers.com/showthread.php?t=2083860
Tried method 2 of that one, didnt get me in position to install the stock firmware.
Does anyone have any advice?
I still can enter CWM (or install it) and can enter Download Mode
I tried 4.3, 4.1.2 and 4.0.4 , nothing worked
Update #1 I could reflash cyangenmod over cwm again and my cell works too. *phew*
How do I get back to stock rom? Meanwhile I'll try mobile odin
update #2
mobile odin worked, got back to stock. just letting u know.
Have you tried another version of ODIN? I used to have some issue with version 3.0 and above. So it seems that version 1.8.5 is more stable that the new ones... try redownload your ROM, maybe it has some issues too.
Finally, use SAMSUNG SG3 TOOLKIT, I have used that too and without any issue.
Good Luck
:cyclops:
froycard said:
Have you tried another version of ODIN? I used to have some issue with version 3.0 and above. So it seems that version 1.8.5 is more stable that the new ones... try redownload your ROM, maybe it has some issues too.
Finally, use SAMSUNG SG3 TOOLKIT, I have used that too and without any issue.
Good Luck
:cyclops:
Click to expand...
Click to collapse
Read post above you
I tried Version 1.85 and 3.09, both didn't work. But thanks to Chainfire for developing this awesome tool :laugh::good:
mobile odin got my phone finally flashed

[Q] Softbricked my S4 ;(

Hey everyone,
I tried updating my Verizon Galaxy S4 to Lollipop via Samsung Kies. The update process produced an error message (at app. 10%) and offered me to start the recovery process, which failed subsequently. Needless to say, Android OS does not work, however I can still boot into download/recovery mode.
I've been trying to flash various stock ROMs via Odin 3.10 with no success. The build numbers of the ROMs I've been trying to flash contained the I545VRUFNC5 number, since I tried preserving compatibility with the previous (Stock) ROM that had the same build number. Prior to flashing Lollipop via Kies, I made the made a screenshot (attached below) in case I ran into some kind of trouble. It contains the Model/Build of my S4.
I've also tried using a PIT file during the flashing process with no success.
The error message Odin gives me always reads:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUFNC5_I545VZWFNC5_I545VRUFNC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
The main question is whether I need to stick to build I545VRUFNC5 to reflash. If not, which Stock ROM am I able to Install via Odin without bricking the phone further
For exact phone model/specs pls open the screenshot below. I would also be very grateful if someone could provide me a stock ROM (name/link/version) that I could flash via Odin to resolve the mess Kies and I created.
Any help is much appreciated.
Thanks in advance.
Make sure to get FULL WIPE AND REPARTITION. All data will be lost..
XxD34THxX said:
Make sure to get FULL WIPE AND REPARTITION. All data will be lost..
Click to expand...
Click to collapse
Thanks for the reply. Sadly, I don't have a custom recovery flashed on my phone. I already tried flashing TWRP and the process resulted in a similar error message as described above (auth fail/error). I've already performed a factory reset via the stock recovery, so the data is already gone
intel.fan said:
Thanks for the reply. Sadly, I don't have a custom recovery flashed on my phone. I already tried flashing TWRP and the process resulted in a similar error message as described above (auth fail/error). I've already performed a factory reset via the stock recovery, so the data is already gone
Click to expand...
Click to collapse
Bad mistake to do TWRP. With reading, you would have known that TWRP is restricted to MDK... Safestrap(@hashcode) is what you have to use. Or Flashfire(@chainfire) or the New Multisystem tool by @hsbadr... Use Odin, get the zip, and flash it in the PDA( or AP) slot. I fixed my friend's when he did that, but he got lucky...
XxD34THxX said:
Bad mistake to do TWRP. With reading, you would have known that TWRP is restricted to MDK... Safestrap(@hashcode) is what you have to use. Or Flashfire(@chainfire) or the New Multisystem tool by @hsbadr... Use Odin, get the zip, and flash it in the PDA( or AP) slot. I fixed my friend's when he did that, but he got lucky...
Click to expand...
Click to collapse
No mate, since the bootloader seems to be locked. It simply didn't flash TWRP - the stock bootloader is still present and running. Trying to flash TWRP was kind of a desparate measure, since I don't have OS access to flash/install any of the above. Also, my phone was 100% stock Kitkat 4.4.2 with no root access
Resolved the issue! =)
The problem was in that the Lollipop update process had already been started (unsuccessfully), Odin was "seeing" the flash process as a downgrade - so it wouldn't allow it.
I tried flashing a stock Lollipop ROM via Odin and it worked like a charm
Thanks for your support.
@mods: Please close/archive this thread.

Returning Rooted Bricked Phone

Hi guys. I have a galaxy s6 that I tried to flash with official firmware 5.1.1 via odin. I was rooted before that. The flash failed and now it says to use Verizon's software utility to restore the phone. That utility doesn't work and the reps at the store had never heard of it.I literally can't fix the thing. No amount of flashing in download mode helps. It always fails.
Anyway, I went to Verizon and they are sending me a replacement in two days. In download mode it still says that the firmware is official. However it also says samsung custom. (Assuming the root) I don't know if Verizon will backcharge me for this. Is there any way to get rid of the custom status? When I put it in the box to return it I'll leave it on the System Software Update Failed screen.
Remember I can't flash via odin, that just fails. Samsung smartswitch doesn't recognize the device. Recovery mode is a no go.
Thanks for the help!
What's the error message in Odin?
Official 5.1.1? It's possible you were trying to flash a lower build....on 5.1.1, you've got to try flashing the same build or higher, it's possible verizon added a downgrade lock
es0tericcha0s said:
What's the error message in Odin?
Click to expand...
Click to collapse
in seems to always fail. I can go back to download mode or be instructed to restore via Verizon's software assistant. Here is what odin has to say. It fails at the system.img Verizon G920V
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
mrao said:
Official 5.1.1? It's possible you were trying to flash a lower build....on 5.1.1, you've got to try flashing the same build or higher, it's possible verizon added a downgrade lock
Click to expand...
Click to collapse
I was not on 5.1.1 at the time. I downloaded 5.1.1 from sammobile or one of the other firmware hosting sites. I also tried 5.0.2 but that gives me a nand error.
Would perhaps flashing a pit file work? The problem is the the one firmware I originally tried to flash (5.1.1) doesn't have a pit file. The other firmware 5.0.2 does have one but it's only 4kb. I'm not sure if that's right.
Just in case anyone finds this in the future. I figured out how to fix this. I had have a working phone to install verizon's upgrade assitant. It would not work from the exe I found on the internet. From there I had to install it in a virtual machine because it did not like Win 10. From there I simply plugged in my device and it restored it. Use this method if odin doesn't work. I WILL NEVER ROOT AGAIN!
So because you had an issue with your computer, you won't root again? Not sure I understand that, but glad you got it fixed.
es0tericcha0s said:
So because you had an issue with your computer, you won't root again? Not sure I understand that, but glad you got it fixed.
Click to expand...
Click to collapse
Odin failed a flash and I could not reflash with odin again. I don't ever want to have that happen again. It wasn't the firmware I triple verified it before I flashed it. It was the correct firmware.

Samsung Galaxy S4 (SCH-I545) Verizon Help Needed (Soft-Brick)

Hello,
I borrowed my roommates Verizon S4 (SCH-I545) and I soft-bricked it. I had a different carrier and needed to root/unlock it, and after a day I was unable to send texts or use data, so I tried to install a recovery to flash a ROM.
However, once I tried to install a recovery, it would not longer boot and would say "Software Update Failed" and it tells me to use the Verizon Software Repair Assistant.
So, I tried using Odin to flash the stock, but I ran into trouble because this phone is on 5.0.1. On Odin, I would have the COM marker light up yellow, so I know the phone was at least recognized.
I also tried to find a Verizon Repair exe file (using windows), and I think I found one for Samsung, but it does not recognize the device being connected (even though Odin does)
Is there anything I can do to save this phone and return it to my roommate?
Fail Log:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shivpaulchadha said:
Hello,
I borrowed my roommates Verizon S4 (SCH-I545) and I soft-bricked it. I had a different carrier and needed to root/unlock it, and after a day I was unable to send texts or use data, so I tried to install a recovery to flash a ROM.
However, once I tried to install a recovery, it would not longer boot and would say "Software Update Failed" and it tells me to use the Verizon Software Repair Assistant.
So, I tried using Odin to flash the stock, but I ran into trouble because this phone is on 5.0.1. On Odin, I would have the COM marker light up yellow, so I know the phone was at least recognized.
I also tried to find a Verizon Repair exe file (using windows), and I think I found one for Samsung, but it does not recognize the device being connected (even though Odin does)
Is there anything I can do to save this phone and return it to my roommate?
Click to expand...
Click to collapse
Do you know what baseband version is on the phone? When Odin initially failed for me it was because the phone was running 5.0.1 and I tried installing the earliest software. Then I downloaded the newest firmware (OF1) and flashed it successfully.
Snowby123 said:
Do you know what baseband version is on the phone? When Odin initially failed for me it was because the phone was running 5.0.1 and I tried installing the earliest software. Then I downloaded the newest firmware (OF1) and flashed it successfully.
Click to expand...
Click to collapse
can u give me the link Firmware OF1 pls :'(
AnggaKun said:
can u give me the link Firmware OF1 pls :'(
Click to expand...
Click to collapse
Turns out I could not find the firmware on here to download so I went too the site SamMobile and performed the painfully slow download from there
Snowby123 said:
Turns out I could not find the firmware on here to download so I went too the site SamMobile and performed the painfully slow download from there
Click to expand...
Click to collapse
when im download at sammobile, the file when im wanna ekstract it always corrupt file
help me im got bootloop on of1, can if im try instal oc1 firmware?:good:
AnggaKun said:
when im download at sammobile, the file when im wanna ekstract it always corrupt file
help me im got bootloop on of1, can if im try instal oc1 firmware?:good:
Click to expand...
Click to collapse
Installing an older firmware likely will fail. Moreover, your download was likely incomplete. That is the most common cause of the file being labeled corrupt. There are other sites you could find the firmware , but the other sites have a weaker reputation
Snowby123 said:
Installing an older firmware likely will fail. Moreover, your download was likely incomplete. That is the most common cause of the file being labeled corrupt. There are other sites you could find the firmware , but the other sites have a weaker reputation
Click to expand...
Click to collapse
im trying to flash.. but stuck
log odin
[/COLOR]<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
stuck in there

Categories

Resources