At some point in the past, I flashed the W84C27MO84 modem file that's floating around on XDA. Now, for some reason, I cannot get the stock ATTJB modem to work anymore. Every time I flash it, the phone appears to be unable to start the modem, and I can never get a connection to the cellular network. Even copying my MODEM, MODEMST1, and MODEMST2 partitions from a working phone did nothing to solve this problem. If I flash back to W84C27MO84, everything works again.
Does anyone know how I can revert my phone back to the stock modem?
Related
Hi guys, I just flashed my p7500 to cm10.1 and everything went pretty smoothly. But now I can't get an internet connection via 3G or wifi, and my tab's bluetooth doesn't seem to be able to pick up anything either. I've tried wiping data, cache and dalvik cache, fixing permission, flashing my bootloader and modem, etc. but nothing seems to be working.
It says Mobile Network State "disconnected" and MDN "unknown". I think I have to flash my modem with the correct file as the one provided by droidbasement isn't working properly on mine.
Does anyone know how I can fix this? Thank you.
Michaelandhistab said:
Hi guys, I just flashed my p7500 to cm10.1 and everything went pretty smoothly. But now I can't get an internet connection via 3G or wifi, and my tab's bluetooth doesn't seem to be able to pick up anything either. I've tried wiping data, cache and dalvik cache, fixing permission, flashing my bootloader and modem, etc. but nothing seems to be working.
It says Mobile Network State "disconnected" and MDN "unknown". I think I have to flash my modem with the correct file as the one provided by droidbasement isn't working properly on mine.
Does anyone know how I can fix this? Thank you.
Click to expand...
Click to collapse
Did you flash the nightly? What build are you running? Bluetooth was fixed. Check out the nightly discussion thread, I posted that you should be using the modem on droidbasement for best results. http://forum.xda-developers.com/showthread.php?t=2074202
Hi, thanks for the response.
I was running the 01012013 nightly but as of now I'm running the 02012013 one with the modem.bin file from pershoot's website.
I just can't get an internet connection for some reason. I even flashed it with the 4.0.4 stock ROM and still can't get my internet back. I think it's because I accidentally flashed my modem with a modem.tar file in Odin under the PDA tab instead of the modem.bin file under the phone tab. Is there a way I can fix this?
Thanks again.
Michaelandhistab said:
Hi, thanks for the response.
I was running the 01012013 nightly but as of now I'm running the 02012013 one with the modem.bin file from pershoot's website.
I just can't get an internet connection for some reason. I even flashed it with the 4.0.4 stock ROM and still can't get my internet back. I think it's because I accidentally flashed my modem with a modem.tar file in Odin under the PDA tab instead of the modem.bin file under the phone tab. Is there a way I can fix this?
Thanks again.
Click to expand...
Click to collapse
So when you flashed the stock ROM, did you ODIN flash or use a CWM zip? Did the modem.tar contain the modem.bin? As far as I know, the tar should have worked but I have a wifi only so I have not flashed modems. Try using Mobile ODIN and see if that helps.
Hi NakedNinja42,
I used odin to flash back to the stock rom, was I supposed to use CWM?
After I flashed it back to the stock rom, I then flashed to the 02/01/2013 nightly, now my bluetooth and wifi are working again, but my 3G is still not connecting. I'm also having trouble getting my PC to recognize my tab as a storage device, but strangely Odin still works.
Again, thanks for helping, I really appreciate it.
Problem solved. Flashed it back to Honeycomb 3.2 and now 3G is back.
I was testing the Sky Note 4.3 leak port from AT&T and everything was working fine. I had data, signal, mms, sms, wifi (after the fix) and all. But I got a bit greedy and tried to flash the Air Commands feature. What I didn't realize ( I was watching a show at the same time) is that I flashed the MJ5 baseband from the International Note 2, GT-N7100. Ever since then, nothing is working "properly." I can flash ROMs normally, but if I flash a ROM that is NOT 4.3, it says my internal storage is 0/0 bytes.
I've also lost my signal/data/imei/etc and it always shows baseband unknown (I have a efs backup folder, but it doesn't seem to read it properly). I can SOMETIMES get signal back when I reflash Jedi X19, but the occasions that it works, data still doesn't. If I reflash Sky Note 4.3, internal storage goes back to normal, but still don't have imei and what not and it says baseband unknown. I've already tried reflashing modems, but they never read.
Now I've tried restoring to stock using the pit file and stock rom, but it never works. the pit file doesn't repartition. If I flash the root66 stock firmware, it works, but goes into a boot loop. My startup logo also shows "Samsung Galaxy Note II GT-N7100." It thinks it's the international version??? I even decided to give it a go and tried flashing the Pit file for the international version and it WORKS. It repartitions it easily. However even with that, I try flashing roms and they work, but the internal storage problem and baseband problem still remain.
I'm thinking that if I wait until the official update comes out, I could get the official 4.3 baseband and firmware and maybe it'll work? I've tried the param_sboot_tz file and it gets stuck on sboot. If I just use the param_tz file, it gets stuck on tz.img. I don't know what else to try to get my phone back to normal. If anyone could help or somehow give a suggestion that I haven't tried, I would truly be grateful. Anyway, thanks for reading.
(Please no bashing, I know it was a mistake.)
you might like to read post at xda for this
thanks,
chat/email : [email protected]
hope the concern is solved
thanks,
chat/email : [email protected]
So, I had an issue with my phone, so i flashed back to stock using the board dl option. but when i try to flash cloudy g3, none of my efs is there (no baseband, phone number, imei, etc.) and i get no data, even after i restore efs from a previous backup, so i think anytime we have an error with the flash tool, something isn't being flashed properly, and is giving us issues. I hope that this won't be an issue with aosp. But i was wondering if anyone else is having this issue, or if i'm the only one? or if there is a fix?
Don't flash cloudya. Flashtool for you now. Then restore your efs. Then any other ROM. That should get you going again.
yah, im on barron right now, and it works fine, i just wanted to try cloudy
Been a lurker for quite some time, there are some amazing devs on this forum and I can't find an answer to my question yet.
So I have a vs985 and it came with stock 12B on it. I used the kdz method to get back to 10B, then used stump root and flashed the bump'd TWRP 2.8.0.0 and immediately flashed TWRP 2.8.5.0. I tried using that to get back to 12B using these image files. In TWRP I flashed autoprime's "flash2" method to flash the system.img but it flashed nearly instantly, without actually doing anything. It says Finshed. Ok. but nothing was changed. You'd think I would just be able to flash a custom rom and move on right?
Correct.
But I can't use data on any custom rom. If I flash Jasmine, Cloudyfa, Skydragon they all work flawlessly... but data doesn't work. The only time data works is in 10B.
Any ideas?
Atraii said:
Been a lurker for quite some time, there are some amazing devs on this forum and I can't find an answer to my question yet.
So I have a vs985 and it came with stock 12B on it. I used the kdz method to get back to 10B, then used stump root and flashed the bump'd TWRP 2.8.0.0 and immediately flashed TWRP 2.8.5.0. I tried using that to get back to 12B using these image files. In TWRP I flashed autoprime's "flash2" method to flash the system.img but it flashed nearly instantly, without actually doing anything. It says Finshed. Ok. but nothing was changed. You'd think I would just be able to flash a custom rom and move on right?
Correct.
But I can't use data on any custom rom. If I flash Jasmine, Cloudyfa, Skydragon they all work flawlessly... but data doesn't work. The only time data works is in 10B.
Any ideas?
Click to expand...
Click to collapse
Hi! Welcome to the forum from the writing perspective.
There's a separate autoprime flash2 for modem, isn't there? I know 11C modem works with 12B ROM, but I don't think anything older - based on what I've read others saying. I've only used 12B with 12B.
You also want the boot.img, IIRC. That's the stock kernel, or flash a stock-compatible kernel but I'd start with stock and make sure all problems are resolved first.
Thanks, I figured it out!
But I still can't use data on custom roms, which I know will bother me down the line. Any idea whats up with that? I successfully flashed the boot.img, system.img, and modem.img. Running stock on 12B everything works great! I know I'll eventually want to try out other roms, but I can't use data on them!
I have signal, the 4G LTE icon appears, but I'm always in "Offline Mode" when on data. Data is on and enabled. Not sure whats up. I would think its a radio problem, but I've tried the attached radio with Skydragon and the one on Jasmine ROM (which is the stock 12B). I went through and can't change my APN settings, I can only change the connection name. I have the network type set to Global, but I also tried leaving it on CDMA/LTE. Seems pretty odd to me. Especially since it works 100% on stock 12B.
Atraii said:
Thanks, I figured it out!
But I still can't use data on custom roms, which I know will bother me down the line. Any idea whats up with that? I successfully flashed the boot.img, system.img, and modem.img. Running stock on 12B everything works great! I know I'll eventually want to try out other roms, but I can't use data on them!
I have signal, the 4G LTE icon appears, but I'm always in "Offline Mode" when on data. Data is on and enabled. Not sure whats up. I would think its a radio problem, but I've tried the attached radio with Skydragon and the one on Jasmine ROM (which is the stock 12B). I went through and can't change my APN settings, I can only change the connection name. I have the network type set to Global, but I also tried leaving it on CDMA/LTE. Seems pretty odd to me. Especially since it works 100% on stock 12B.
Click to expand...
Click to collapse
Check your IMEI number. Is it zeroed out? If so, then go here to fix it -> http://forum.xda-developers.com/showpost.php?p=58915450&postcount=3
Hello all.
I tried a rom (Barepops) coming from stock KK. Then i restored back after testing LP and my network is borked. It will detect network, show red x, then refresh icon... Repeat.
I tried flashing a zv4 radio zip and it is still the same.
I am using gsm and it was working fine. Now it says network disabeled. Please help.
Ps. Is there a way to tell if i lost carrier unlock?
Thanks
Android03 said:
Hello all.
I tried a rom (Barepops) coming from stock KK. Then i restored back after testing LP and my network is borked. It will detect network, show red x, then refresh icon... Repeat.
I tried flashing a zv4 radio zip and it is still the same.
I am using gsm and it was working fine. Now it says network disabeled. Please help.
Ps. Is there a way to tell if i lost carrier unlock?
Thanks
Click to expand...
Click to collapse
It depends which BarePop was last.
TE has the right rpm,tz partitions.
If another, or stock I think, then flash the ZV4/6 rpm,tz partitions. They're in each of those threads. Posts 2, 3or 4.
Also, the modems aren't backwards compatible. So if on ZV8, it should work with any lollipop ROM.
If KK, then flash, or restore the ZV4/6 modem with TWRP.
The rpm,tz partitions will work with any ROM. But we seem to have less issues with the ZV4/6 rpm,tz partitions.
Thank you for replying!
I used V1. I read about the ZV4/6 rpm,tz partitions and used twrp to flash. Nothing.
Do yo believe that i probably lost the carrier unlock status? Any way i can check that?
I wil search the forum for a carrier unlock method (unless u know one right off the top of your mind)
Again, thank you.
Did you by a chance use my method? Or the one where you replace the files?
Try updating your profile and prl then type this into your phone app: ##update#
After that download terminal and restart your rild by running the following commands:
su <gets superuser accsess
killall rild <will restart your rild
If you lost your unlock then you will be locked to sprint and won't beable to go to any other carriar.
I followed instructions on op and pages 2 3 and 4. When i tried updating prl is just didn't do anything. All i want now is to get the phone how it was before. I already reverted back to stock kk.. The issue is i believe with the rpm. I am not in the us. (if that matters)
I noticed that the baseband now says uknown.
Should i wipe anything and flash the rpm again?
If you wipe everything try doing this guide: http://forum.xda-developers.com/showpost.php?p=54442210&postcount=28
I had that issue, I could not get the modem to flash. Using twrp, had to use flash2 method.
http://forum.xda-developers.com/lg-g3/development/psa-stop-taking-ota-updates-update-t2909412
Here is stock partition for ls990, thanks to autoprime
http://downloads.codefi.re/autoprime/LG/LG_G3/LS990/stock_partitions
Thank you all. It would seem this was an error from my end as i had not flashed zv4 modem as explained.
All good now.