I have a tablet with this SoC Allwinner A83T. Its like a generic tablet (OEM) q102a. It has Android 5.1.1 what I managed to root with KingRoot. I followed this to replace KingRoot with SuperSU, and the device stuck in bootloop. Any help/solution would be appreciated. The tablet can go to recovery, but its an android recovery not custom. There is no ADB, ( adb cant see the device) and only what i found is .img image what I cant flash.
I found several frimware in here but dont know how can I flash it.
You can try Phoenixsuit this Flash tool.do you get rom?
52571abc said:
You can try Phoenixsuit this Flash tool.do you get rom?
Click to expand...
Click to collapse
yeah nice advice
hi
If you guys has any problem can ask me
cuz I flash my A31s tablet it was success!
i have that soc and trying to access boot loader just show the SPC logo and stay there.
the command 'C:\adb>fastboot.exe oem device-info
< waiting for device >
' isnt working.
help ?
Can you show me the photo?
For the SPC tablet dude (not the q102a), I found the original firmware for mine (Dark Glow model), it has only 2 buttons at the right side, Power and Back.
I can't post URLs, but just google for A83T_N102_N1021L1BC_20151123.img and you should find the location.
There are several firmwares there, check your model for the correct one!
Then flash it with PhoenixSuit and you are good to go!
If more help needed, just say it.
---------- Post added at 01:04 PM ---------- Previous post was at 12:24 PM ----------
Libi_79 said:
I have a tablet with this SoC Allwinner A83T. Its like a generic tablet (OEM) q102a. It has Android 5.1.1 what I managed to root with KingRoot. I followed URL to replace KingRoot with SuperSU, and the device stuck in bootloop. Any help/solution would be appreciated. The tablet can go to recovery, but its an android recovery not custom. There is no ADB, ( adb cant see the device) and only what i found is .img image what I cant flash.
I found several frimware in URL but dont know how can I flash it.
Click to expand...
Click to collapse
To flash the .img with PhoenixSuit (though I'm sure there are better tutorials out there):
Download and install PhoenixSuit in your PC (version I tried 1.0.0.1).
Open it; in the Firmware tab, browse the .img file and select it. If you click Upgrade, the program will say the device is not connected and it will show you instructions on how to put the tablet in Upgrade Mode, which I'll say now. Make sure the tablet battery is full.
With the tablet shut down, press and keep holding the volume buttons (+ and -, in case it has no volume buttons, any other buttons that are not the power button).
While pressing them, connect the tablet with the USB cable, then press the power button at least 10 times until your computer recognizes a new hardware. You can now release all buttons. Allow installation of this new hardware.
If it went OK, then PhoenixSuit should automatically recognize it and a window will appear asking to format, say Yes to all and wait for flash to finish. It should say Succeed at the end. You can now unplug the tablet, close PhoenixSuit and wait till the tablet starts up on its own (it can take some minutes with a new installation ).
GiantChicken said:
For the SPC tablet dude (not the q102a), I found the original firmware for mine (Dark Glow model), it has only 2 buttons at the right side, Power and Back.
I can't post URLs, but just google for A83T_N102_N1021L1BC_20151123.img and you should find the location.
There are several firmwares there, check your model for the correct one!
Then flash it with PhoenixSuit and you are good to go!
If more help needed, just say it.
---------- Post added at 01:04 PM ---------- Previous post was at 12:24 PM ----------
To flash the .img with PhoenixSuit (though I'm sure there are better tutorials out there):
Download and install PhoenixSuit in your PC (version I tried 1.0.0.1).
Open it; in the Firmware tab, browse the .img file and select it. If you click Upgrade, the program will say the device is not connected and it will show you instructions on how to put the tablet in Upgrade Mode, which I'll say now. Make sure the tablet battery is full.
With the tablet shut down, press and keep holding the volume buttons (+ and -, in case it has no volume buttons, any other buttons that are not the power button).
While pressing them, connect the tablet with the USB cable, then press the power button at least 10 times until your computer recognizes a new hardware. You can now release all buttons. Allow installation of this new hardware.
If it went OK, then PhoenixSuit should automatically recognize it and a window will appear asking to format, say Yes to all and wait for flash to finish. It should say Succeed at the end. You can now unplug the tablet, close PhoenixSuit and wait till the tablet starts up on its own (it can take some minutes with a new installation ).
Click to expand...
Click to collapse
I have some device
---------- Post added at 09:38 AM ---------- Previous post was at 09:37 AM ----------
52571abc said:
I have some device
Click to expand...
Click to collapse
I can help you
---------- Post added at 09:44 AM ---------- Previous post was at 09:38 AM ----------
52571abc said:
I have some device
---------- Post added at 09:38 AM ---------- Previous post was at 09:37 AM ----------
I can help you
Click to expand...
Click to collapse
Same device (wrong word sorry)
52571abc said:
I have some device
---------- Post added at 09:38 AM ---------- Previous post was at 09:37 AM ----------
I can help you
---------- Post added at 09:44 AM ---------- Previous post was at 09:38 AM ----------
Same device (wrong word sorry)
Click to expand...
Click to collapse
????
The HIPO A106T Android 5.1 has the same processor. Can I root it do you think?
baconboy said:
The HIPO A106T Android 5.1 has the same processor. Can I root it do you think?
Click to expand...
Click to collapse
I think you can try kingroot first
52571abc said:
I think you can try kingroot first
Click to expand...
Click to collapse
Is you tablet board look like this?
Has anyone found a modified (for this 9 inch Supersonic/Allwinner A83 1024*600) recovery? I've gotten the recoveries (TWRP) for an X10 tablet to flash, but the touch screen is inoperative.
try kingroot first
baconboy said:
The HIPO A106T Android 5.1 has the same processor. Can I root it do you think?
Click to expand...
Click to collapse
you can try kingroot first if you get root you can backup you rom first
rom backup teach :https://www.youtube.com/watch?v=C59zFu63BDU
---------- Post added at 02:50 PM ---------- Previous post was at 02:46 PM ----------
actionville said:
Has anyone found a modified (for this 9 inch Supersonic/Allwinner A83 1024*600) recovery? I've gotten the recoveries (TWRP) for an X10 tablet to flash, but the touch screen is inoperative.
Click to expand...
Click to collapse
can you show me your tablet photo or website\
I hate to open this thread back up, but I have acquired a chinese tablet A83t-N106. I got this from a business close out purchase.
I was some type of customer loyalty program. The screen worked but had a limited android OS on it. I used the PhoenixSuite to access the details.
I found this was the OS installed "A83T_N106_N1061L6BC_20160309-ok.img" I found this from a Chinese website. I flashed it without any error. I cannot get the screen to show anything. If i connect to my computer it sees the device and I can move/delete/add files to the files system.
Related
Hello,
I have the Huawei G750 smartphone. Through my incredible stupidity I have flashed a wrong recovery.img ... now it hangs in Bootloop. I already tried to flash the firmware again with SpFlashTools, gives me "Error 2004"
Is there still a possibility to fix it?
thanks
Do you fixed?
unfortunately not
Unfortunately I am having the same issue now.
I found here a page which explain what to do, but it does not seem to be possible on my HiSuite:
translate.google.com/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fcn.club.vmall.com%2Fforum.php%3Fmod%3Dviewthread%26tid%3D806554&edit-text=
---------- Post added at 09:00 PM ---------- Previous post was at 08:53 PM ----------
While it reboots, you have the volume-down button for about 10 seconds, then you get a screen which tells you to connect to HiSuite, but it does not help as said before
witoREV was
glehrer said:
Unfortunately I am having the same issue now.
I found here a page which explain what to do, but it does not seem to be possible on my HiSuite:
translate.google.com/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fcn.club.vmall.com%2Fforum.php%3Fmod%3Dviewthread%26tid%3D806554&edit-text=
---------- Post added at 09:00 PM ---------- Previous post was at 08:53 PM ----------
While it reboots, you have the volume-down button for about 10 seconds, then you get a screen which tells you to connect to HiSuite, but it does not help as said before
Click to expand...
Click to collapse
Finally I found it.
see forum.xda-developers.com/showthread.php?p=54487265 where it says:
c:\abd>fastboot continue
and the phone should boot then normally stopping the bootloop
Click to expand...
Click to collapse
glehrer said:
Finally I found it.
see forum.xda-developers.com/showthread.php?p=54487265 where it says:
Click to expand...
Click to collapse
I suppose if you restart your phone, you will have the same problem again.
I am new here and I apologize if this is a repeat but I have spent hours reading threads and looking for a solution. If it's here I can't find it. Below is the screen I get when I turn it on. I've found threads that show the same screen but not how to fix it. I would like the simplest way to get it back working and booting again either to factory specs or to one of the mods. I have never flashed or rooting this phone and I need to find instructions that are step by step that I can follow. I've made sd cards for my nook before following instructions from here but I need them to be complete and thorough since I am not well versed. Any help will be greatly appreciated including pointing me to existing instructions if they exist because I can't find them.
I have a Droid Razr Maxx HD (XT 926) that failed. I have tried pretty much every suggestion that I could find to make it start up again without success. AT this point I can't tell you all the steps I have tried but I know I tried normal powerup, recovery, AP fastboot, factory and bp tools and nothing happens with any of them. I know at one point I got somewhere (hours of trying adn I no longer know all of what I have tried) where i had an option to format and recover or something like that. Yes i tried it and got nowhere. Yes go ahead and say I am in idiot because at this point I agree with you!!
When i power it on now I get the following screen - black background with white text:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-1e9f557, 2013-05-25 01:04:26)
eMMC Info:Size 16gb
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Failed to hab check for boot: 0x56
Fastboot Reason: Boot Failure
Any help is greatly appreciated as my wife's phone just died and we can't afford to buy a new one so i need to get this one back up and running. Thanks anyone and everyone.
"boot load selection menu" does nothing regardless of option selected
mspeter said:
I am new here and I apologize if this is a repeat but I have spent hours reading threads and looking for a solution. If it's here I can't find it. Below is the screen I get when I turn it on. I've found threads that show the same screen but not how to fix it. I would like the simplest way to get it back working and booting again either to factory specs or to one of the mods. I have never flashed or rooting this phone and I need to find instructions that are step by step that I can follow. I've made sd cards for my nook before following instructions from here but I need them to be complete and thorough since I am not well versed. Any help will be greatly appreciated including pointing me to existing instructions if they exist because I can't find them.
I have a Droid Razr Maxx HD (XT 926) that failed. I have tried pretty much every suggestion that I could find to make it start up again without success. AT this point I can't tell you all the steps I have tried but I know I tried normal powerup, recovery, AP fastboot, factory and bp tools and nothing happens with any of them. I know at one point I got somewhere (hours of trying adn I no longer know all of what I have tried) where i had an option to format and recover or something like that. Yes i tried it and got nowhere. Yes go ahead and say I am in idiot because at this point I agree with you!!
When i power it on now I get the following screen - black background with white text:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-1e9f557, 2013-05-25 01:04:26)
eMMC Info:Size 16gb
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Failed to hab check for boot: 0x56
Fastboot Reason: Boot Failure
Any help is greatly appreciated as my wife's phone just died and we can't afford to buy a new one so i need to get this one back up and running. Thanks anyone and everyone.
Click to expand...
Click to collapse
I spent another night reading threads looking for a solution without success. I believe by now I have lost everything including the OS so I need to find instructions for how to bring it back to ANY state, factory or CM anything. When i hold all three buttons down and the screen goes dark I release the power button (Still hold down both volumes) and eventually the "boot load selection menu" comes up. None of the options do anything except go back to AP Fastboot. Can anyone please help me with instructions for what to do to fix? Thanks for any assistance anyone can provide.
Install rsd lite 6.1.6, download your ROM from sbf android, don't recall the site name exactly. Install Motorola drivers. Flash it up while in boot mode.
That's a good start.
hbenz2008 said:
Install rsd lite 6.1.6, download your ROM from sbf android, don't recall the site name exactly. Install Motorola drivers. Flash it up while in boot mode.
That's a good start.
Click to expand...
Click to collapse
i downloaded all the files but before I proceed let me confirm you run RSD lite from a pc with teh phone connected right? I assume once that is done my droid menus will operate and I will be able to flash it from boot mode using 4.4.2? Like i said I have never done this before so i am trying to proceed caustiously so pardon my ignorance and hesitation if you can. And thanks again if you decide to stay with me and walk me through this.
Yes from pc while 926 is connected. Just make sure you have the right ROM for ur phone. Be back in few hours. Reverify, read, and proceed. You had stock on it before, flash stock then deal with update later.
hbenz2008 said:
Yes from pc while 926 is connected. Just make sure you have the right ROM for ur phone. Be back in few hours. Reverify, read, and proceed. You had stock on it before, flash stock then deal with update later.
Click to expand...
Click to collapse
I'm sorry I had to go out of town for three days but I;m back and unfortunately lost. I have been looking for an "SBF" file to use with RSDlite but maybe I have it and just don't know it because it's not called that. I downloaded several Motorola firmware files for my XT926. Below is the list of those files but none of them have a file type of SBF. Are these the right files?
Also when I run RSDlite and connect my phone it does not show up. When i click "show device" nothing happens. I unplugged and reconnect no luck. i shut down rsdlite and restarted no luck.
Android 4.0.4
Blur_Version.0.6.25.XT926.Verizon.en.US
Verizon US
605.3 MiB
433701B78701EFB5E5AA5D97BC9E07B5
Android 4.1.1
Blur_Version.9.1.41.XT926.Verizon.en.US
Verizon US
620.0 MiB
60D197DFEEB0DD3C138BB8E5DBA44FD6
Android 4.1.2
Blur_Version.9.16.6.XT926.Verizon.en.US
Verizon US
622.2 MiB
C17282528E409E1C4AE618DEFB5AE208
Android 4.1.2
Blur_Version.9.16.9.XT926.Verizon.en.US
Verizon US
621.0 MiB
4E25174CC00BC3B00CB3A53EAA510BE8
Android 4.1.2
Blur_Version.9.20.1.XT926.Verizon.en.US
Verizon US
626.7 MiB
B67F3A2D238BB9502FB82FCFBB89274D
Android 4.1.2
Blur_Version.9.30.1.XT926.Verizon.en.US
Verizon US
627.4 MiB
C374485427EFD219F4FBBEFE263267B5
Android 4.4.2
Blur_Version.183.46.10.XT926.Verizon.en.US
Verizon US
741.2 MiB
856606BFC7A74A473924954F67CC23C5
Hi :
Do you know what version was on your phone jelly bean 4.1.2 or kitkat 4.4.2? Anyway no harm trying to flash jelly bean:
Android 4.1.2
Blur_Version.9.30.1.XT926.Verizon.en.US
Verizon US
627.4 MiB
C374485427EFD219F4FBBEFE263267B5
Yor phone must be showing apfastboot, plus of course you must have motorola drivers installed on your pc in order for it to recognize your Droid.
hbenz2008 said:
Hi :
Do you know what version was on your phone jelly bean 4.1.2 or kitkat 4.4.2? Anyway no harm trying to flash jelly bean:
Android 4.1.2
Blur_Version.9.30.1.XT926.Verizon.en.US
Verizon US
627.4 MiB
C374485427EFD219F4FBBEFE263267B5
Yor phone must be showing apfastboot, plus of course you must have motorola drivers installed on your pc in order for it to recognize your Droid.
Click to expand...
Click to collapse
Thanks for your help. no unfortunately I don't know what version it used to be on. So you are pointing out the file i should run so thanks. i will see if i can run that in rsdlite and maybe get somewhere wtih this. back in a few.
That is at least a safe manoeuvre. It won't kill ur phone
hbenz2008 said:
That is at least a safe manoeuvre. It won't kill ur phone
Click to expand...
Click to collapse
ran the file using rsdlite and it decompressed apparently fine. It says for phone model "VANQUISH_CFC_IFLASH" and I don't know that is right. I have a XT926 Razr Maxx HD. My device does not show up in the device window and when I press the start button nothing appears to happen I presume because my phone does not show up in the window? Not sure how to proceed at this point?
Extract your download to a folder in your desktop. Make sure you point rsd lite to the xml file on the extracted folder. Let it do the rest. Did you download Motorola drivers?
hbenz2008 said:
Extract your download to a folder in your desktop. Make sure you point rsd lite to the xml file on the extracted folder. Let it do the rest. Did you download Motorola drivers?
Click to expand...
Click to collapse
i created a folder on my desktop, copied the file to it, ran rsdlite and it decompressed again (this time to that folder I assume) and i then selected the xml file. no device shows up yet and select the show device button does nothing. i then press start and again it seems to do nothing. the file properties box is filled in with info such as file name creation date size version etc. so that looks good. To me it appears to not be able t find the phone to run it on. the phone is in the AP Fastboot Flash mode screen - is this the correct place for the phone to be at?
also i have not downloaded drivers yet. I have downloaded some files based on other threads such as build files, somethign KITKAT, latest CM build from 20140918 and who knows what else at this point. I hae not used anything yet other than the xml you are having me try to run.
Google Motorola drivers 2.4.5 or go to MoTo website. Gotta have drivers for the pc to recognize the phone
---------- Post added at 04:14 PM ---------- Previous post was at 04:09 PM ----------
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
---------- Post added at 04:14 PM ---------- Previous post was at 04:14 PM ----------
Download, reboot and try again
hbenz2008 said:
Google Motorola drivers 2.4.5 or go to MoTo website. Gotta have drivers for the pc to recognize the phone
---------- Post added at 04:14 PM ---------- Previous post was at 04:09 PM ----------
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
---------- Post added at 04:14 PM ---------- Previous post was at 04:14 PM ----------
Download, reboot and try again
Click to expand...
Click to collapse
AWESOME. phone is now recognized so i am decompressing again and set it to flash when complete. Fingers crossesd and THANK YOU for getting me this far!! First Time i have felt maybe some progress.
Cool man, it will come back to life and be better than what it was.
mspeter said:
AWESOME. phone is now recognized so i am decompressing again and set it to flash when complete. Fingers crossesd and THANK YOU for getting me this far!! First Time i have felt maybe some progress.
Click to expand...
Click to collapse
Failed the flash. Info is as follows
Model= Fastboot Vanquish S
Port=1
Port type - USB
IME/ESN/MEID=n/a
Status = Failed flashing process. 2/29 flash sbl1 "sbl1.mbn"-> Phone returned FAIL
Result-Fail
There is a work around. What s the 2/29 on rsd lite say exactly?
---------- Post added at 04:30 PM ---------- Previous post was at 04:25 PM ----------
The xml file needs editing. But need to Know the exact error. Xml gets edited by note pad. Easy process
---------- Post added at 04:34 PM ---------- Previous post was at 04:30 PM ----------
Remove this Line between < get Var > and try again. Keep a fresh xml saved somewhere in ur pc
hbenz2008 said:
There is a work around. What s the 2/29 on rsd lite say exactly?
---------- Post added at 04:30 PM ---------- Previous post was at 04:25 PM ----------
The xml file needs editing. But need to Know the exact error. Xml gets edited by note pad. Easy process
---------- Post added at 04:34 PM ---------- Previous post was at 04:30 PM ----------
Remove this Line between < get Var > and try again. Keep a fresh xml saved somewhere in ur pc
Click to expand...
Click to collapse
It says precisely what I posted above - Failed flashing process. 2/29 flash sbl1 "sbl1.mbn" - > Phone returned FAIL
Remove line I posted above. Take the whole line. < >
hbenz2008 said:
Remove line I posted above. Take the whole line. < >
Click to expand...
Click to collapse
opened the file in notebook
found the line that mentioend sb1 adn i deleted it all leaving only the <>
selected "save as" and the file type option was text file
opened rsdlite again and when I selected the modified file box pops up saying ?PLease check input file. Either XML format is wrong or image files asociated with it are missing"
went back in and got rid of the open and close carrots and re-ran rsdlite
ran longer and i got a few beep tones but still failed.
this time it says
Failed Flashing process. 10/28 flash partition "gpt_main0.bin" - > Phone returned FAIL
Hi
could someone please send me stock rom for Alcatel pop 4, My phone is stuck on Alcatel logo after installing a theme and i have tried everything but i can't find a rom anywhere on internet.
Thank You
I have the same problem and I can´t find any.
GolpeadorMágico said:
I have the same problem and I can´t find any.
Click to expand...
Click to collapse
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
JordieSnipezHD said:
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
Click to expand...
Click to collapse
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
GolpeadorMágico said:
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
Click to expand...
Click to collapse
I could upload twrp backup if help
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Please, I´m going to try anything for recover it.
GolpeadorMágico said:
Please, I´m going to try anything for recover it.
Click to expand...
Click to collapse
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
Click to expand...
Click to collapse
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
Click to expand...
Click to collapse
I will never buy another there's no development or ROMs nothing I have installed exposed and root
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
I will never buy another there's no development or ROMs nothing I have installed exposed and root
Click to expand...
Click to collapse
Yeah, this mobile sucks. My mom lend me it and its horrible. I lost the system (you know) and the mobile update (Alcatel) don´t do any. I put it, the mobile sometimes its not recognized... No more. Alcatel, not again.
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
zbaracki said:
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
Click to expand...
Click to collapse
Can u get into twrp recovery
mygadgetgeek.com said:
Can u get into twrp recovery
Click to expand...
Click to collapse
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
zbaracki said:
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
Click to expand...
Click to collapse
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Cryonics said:
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Click to expand...
Click to collapse
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
zbaracki said:
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
Click to expand...
Click to collapse
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
bulletbeef said:
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
Click to expand...
Click to collapse
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
zbaracki said:
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
Click to expand...
Click to collapse
i had the same issue searched everywhere and nobody gave good drivers or complete answers not even alcatel themselves, so i figured it out, that's what this community is for
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
Click to expand...
Click to collapse
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
I succesefuly installed the stock rom witout mobile upgrade mobil
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
Click to expand...
Click to collapse
I had the same issue i was unable to install the stock rom using mobile upgrade it will say this is the last firmware there is no new update so i searched the web and i found a solution finaly its callad a software named sugar
what you need is a usb cable a good internet conection and drivers installed
make sure to follow instruction of the software to download
you will find the all instructions on this russian thread https://4pda.ru/forum/index.php?showtopic=675134&st=440#entry46026273
if you need any help just send me a pm
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Removed:
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Can you upload your twrp backup, or at least your stock recovery pleeease? I really need it since this is my work phone and it should be as stock as it came when they check it.
Hello,
I think i bricked my phone.
I unlocked the bootloader with ADB and then was trying to flash CWM for rooting the device, and after ADB told me that it was flashed succesfully, i rebooted my phone and now is stuck on Archos logo. Bootloop, the phone is detected by my pc, because you can hear the sound when u pin the usb, but i don't have access to it. Windows says there's a problem with this device and can't recognize it.
However, now it's not even bootloop anymore, the phonte screen just turned black, no more bootloop, no more vibration, no more nothing. The only thing is this windows sound when plug in the phone.
Actually, i try to fix it with SP Flashtool, but i'll be thankful if anyone helps.
Have a nice day.
#Edit: Archos 55 Helium
lengockhanhhai said:
Me too.help plz
Click to expand...
Click to collapse
??
up
up
help pleas, it's really important
UP
Did you try leaving the phone on until the battery drains out? Worked for me once.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
If it doesn't work, try flashing the stock recovery for your phone using adb. I hope you took a backup of it, but if not, begin searching the web for it.
Does your phone has a forum of its own on XDA?
If yes, you may ask there for the stock recovery.
Augustoandro said:
Did you try leaving the phone on until the battery drains out? Worked for me once.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
If it doesn't work, try flashing the stock recovery for your phone using adb. I hope you took a backup of it, but if not, begin searching the web for it.
Does your phone has a forum of its own on XDA?
If yes, you may ask there for the stock recovery.
Click to expand...
Click to collapse
Hey and thank's for your reply,
The battery is already drained out, but nothings changed.
Also, how can i flash a stock recovery if adb and fastboot doesn not even recognize my phone right now? I have a recovery and stock rom, but no utility to flasht them.
SP Flashtool started to do the job, but failed after with some errors messages :/
Also it doesn not have a XDA forum, it's a not-known yet brand.
So i have a Sony Xperia XZ3 Dual. I have now fixed the corrupted thing. But my Camera wont work only if i use VIDEO! So what have i missed?
I have download another ROM from a dude its like 2.6gb the one i have now is 2.4. Shall i replace it and how do i do it? If not, what shall i do to make the camera work.
fix your device
Hi, welcome to xda Developers
I need your phone model. This can be found in the device's About Phone menu
After that download the flashtool. I hope that you have already downloaded it. Launch it and then select xperifirm
Select your device and your device model and then download the firmware for your phone, press the firmware version button. After the firmware has been downloaded, close xpreifirm, FlashToll will ask you to select the downloaded firmware. Press ok . Next press the lightning button.
Select SONY Xperia XZ3 phone model and model number of your phone, firmware customization and firmware version the one you've downloaded in step No. 7.
12. Next check userdata, cust-reset everything else must be unchecked.
13. When you're ready press Flash button.
14. Connect turned off Xperia XZ3 phone to USB cable with pressed volume down button.
15. Release volume down button when you see "Device connected in flash mode" information in FlashTool windows log.The flash process starts, now just wait until process end.
hi mohammed
I have Sony Xperia XZ3 DUAL H9436. ? Can u might REMOTE my computer and help me that way through skype or something? cause im not that high tech of flashtools
I will wait for you to replay so i dont **** my phone again .
Update: So in FLASHTOOL64 i select the firmware i have downloaded but nothing happening?
Update: Sony mobile flasher dont have my Phone! highest is H8 in the XZ3 sektion hmm.
fix your device
You have to select Sony Xperia XZ3 Dual in the options because every single or dual sim model has a different model
After selecting your phone download the rom and flash it to your phone
Back up your data first because this update will delete your data
hi
Hi again, like i said : My phone dont comes up in flashtool the newest is sony xperia XZ3 dual H8XX and thats wrong? :s
The last option is to connect to your computer through teamviewer
Install teamviewer in your computer and send me your partner ID
After that you have to keep teamviewer open and wait for a black screen on your computer
If it is a black screen then i have connected to your computer. After that I will take care of the rest of the things
If you want I can also install Android Q on your phone because it is supported
hi again
teamviewer id -> 1 350 116 815 password: x97vt3
why did you close the connection
Are you back
If you are we may proceed to fix your https://forum.xda-cdn.com/images/icons/advanced/phone.png
Your Teamviewer password?
---------- Post added at 12:19 PM ---------- Previous post was at 11:31 AM ----------
Where are you
I have to go now
So you don't need me now
---------- Post added at 06:08 AM ---------- Previous post was at 06:07 AM ----------
Because I found a rooting method for your phone
muhammad42620 said:
So you don't need me now
---------- Post added at 06:08 AM ---------- Previous post was at 06:07 AM ----------
Because I found a rooting method for your phone
Click to expand...
Click to collapse
First one is Magisk zip file and second is Magisk Manager