Hello,
I think i bricked my phone.
I unlocked the bootloader with ADB and then was trying to flash CWM for rooting the device, and after ADB told me that it was flashed succesfully, i rebooted my phone and now is stuck on Archos logo. Bootloop, the phone is detected by my pc, because you can hear the sound when u pin the usb, but i don't have access to it. Windows says there's a problem with this device and can't recognize it.
However, now it's not even bootloop anymore, the phonte screen just turned black, no more bootloop, no more vibration, no more nothing. The only thing is this windows sound when plug in the phone.
Actually, i try to fix it with SP Flashtool, but i'll be thankful if anyone helps.
Have a nice day.
#Edit: Archos 55 Helium
lengockhanhhai said:
Me too.help plz
Click to expand...
Click to collapse
??
up
up
help pleas, it's really important
UP
Did you try leaving the phone on until the battery drains out? Worked for me once.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
If it doesn't work, try flashing the stock recovery for your phone using adb. I hope you took a backup of it, but if not, begin searching the web for it.
Does your phone has a forum of its own on XDA?
If yes, you may ask there for the stock recovery.
Augustoandro said:
Did you try leaving the phone on until the battery drains out? Worked for me once.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
If it doesn't work, try flashing the stock recovery for your phone using adb. I hope you took a backup of it, but if not, begin searching the web for it.
Does your phone has a forum of its own on XDA?
If yes, you may ask there for the stock recovery.
Click to expand...
Click to collapse
Hey and thank's for your reply,
The battery is already drained out, but nothings changed.
Also, how can i flash a stock recovery if adb and fastboot doesn not even recognize my phone right now? I have a recovery and stock rom, but no utility to flasht them.
SP Flashtool started to do the job, but failed after with some errors messages :/
Also it doesn not have a XDA forum, it's a not-known yet brand.
Related
I rooted my GS3, tried to upload a new ROM, finished installing the ROM and hit reboot and it bricked. My PC wont pick it up, neither will Kies and neither will a toolkit. My PC makes connections sounds when I press the power button, but it wont turn on and my PC wont recognize it. Please help me!
Ok, slow down and explain exactly what Rom you where trying to install, and the installation steps you took for a start
slaphead20 said:
Ok, slow down and explain exactly what Rom you where trying to install, and the installation steps you took for a start
Click to expand...
Click to collapse
it was the revolt ROM from this link http://forum.xda-developers.com/showthread.php?t=2035365.
it came with a set up wizard which i thought was strange. i went through all the steps that it asked for. then at the end it had a reboot now button and i clicked it. it then powered off and never came back on. when i plug it into the computer it makes a sound like it connected, but then it says the driver failed to install. the driver that it lists is QHSUSB_DLOAD. i downloaded that driver manually from the samsung website and it still says its not found.
when i plug in the phone to a charger without the battery in, the red light comes on for about 1 minute and then turns off. that's as far as ive gotten so far.
Will it boot into recovery?
---------- Post added at 08:33 AM ---------- Previous post was at 08:32 AM ----------
If it does, try wiping cache and dalvik cache and try reboot, failing that you might have to try wiping data
---------- Post added at 08:36 AM ---------- Previous post was at 08:33 AM ----------
Did you format system before you flashed the Rom?
slaphead20 said:
Will it boot into recovery?
---------- Post added at 08:33 AM ---------- Previous post was at 08:32 AM ----------
If it does, try wiping cache and dalvik cache and try reboot, failing that you might have to try wiping data
---------- Post added at 08:36 AM ---------- Previous post was at 08:33 AM ----------
Did you format system before you flashed the Rom?
Click to expand...
Click to collapse
It will not boot at all. I have tried all the different key combinations. I did not format system but I did choose to wipe data and cache in Rom manager when I said to install from sd.
So you tried to install it via Rom manager?
slaphead20 said:
So you tried to install it via Rom manager?
Click to expand...
Click to collapse
yes. And then when it rebooted it took me into the wizard to install it step by step. Then at the very end when it said to reboot now, The screen went black and it never turned on again.
Press volumeup + menu button +powerbutton and see
Else try volumedown+menu button +powerkey
Sent from my GT-I9300 with a BIG
jaidev.s said:
Press volumeup + menu button +powerbutton and see
Else try volumedown+menu button +powerkey
Sent from my GT-I9300 with a BIG
Click to expand...
Click to collapse
I've tried those combinations. It doesn't turn the phone on, but when it's plugged in to the computer and I do that it makes a sound as if a device has been plugged in. Then it fails downloading the driver and doesn't show up. Not even in the adb toolkit.
poketjjax said:
I've tried those combinations. It doesn't turn the phone on, but when it's plugged in to the computer and I do that it makes a sound as if a device has been plugged in. Then it fails downloading the driver and doesn't show up. Not even in the adb toolkit.
Click to expand...
Click to collapse
I forgot to mention that my s3 model is the i747 one if that makes any difference.
Anything you do with help from this forum might damage your phone beyond repair. Better ask in the Q&A sub-forum under AT&T, Rogers, Bell Samsung Galaxy S3 forum.
Good luck!
Sent from my GT-I9300 using xda app-developers app
so you flashed a ROM for the i9300? why?
try taking out the battery
Glebun said:
so you flashed a ROM for the i9300? why?
try taking out the battery
Click to expand...
Click to collapse
Yes I tried taking the battery out and that didn't work either. I flashed that Rom because I didn't think there was a difference. Does this mean I'm screwed?
poketjjax said:
Yes I tried taking the battery out and that didn't work either. I flashed that Rom because I didn't think there was a difference. Does this mean I'm screwed?
Click to expand...
Click to collapse
I'm sorry, but it kinda seem you are.
Your device's SKU is not the same as i9300 ones.
You installed the Rom of one device to another, it can easily hard brick your cell which it might have.
nothing you can do now beside sending it in
Glebun said:
nothing you can do now beside sending it in
Click to expand...
Click to collapse
Could a Samsung service center fix it? They probably can't tell it's rooted right?
Also, I have a dual boot of Linux on my laptop. Would there be a better chance of Linux recognizing the device?
they can't "fix" it, they'll replace the motherboard. they won't tell if it's rooted. Linux is not better. have you tried a usb jig?
Glebun said:
they can't "fix" it, they'll replace the motherboard. they won't tell if it's rooted. Linux is not better. have you tried a usb jig?
Click to expand...
Click to collapse
Alright a few questions:
what is a USB jig?
how much do they charge to replace a motherboard?
if they ask me if its rooted should I lie and say no?
also, I think its under warranty, but would rooting it void it and could they tell?
motherboard replacement is around $350. Lying would be insurance fraud, so I can't give you any advice here. They might decline warranty if they find out you're rooted.
And to find out what a USB jig is you can use Google
Edit deleted
Hi there, I have this problem with my Samsung Galaxy S4 Clone [MT6589], while ago it works but there's a problem on IMEI, so what I did is I repair it with MTK Droid tools but I rebooted it, mediatek boot screen not showing anymore and it going to restart and restart. So what I did was accessing the stock recovery option and going to "wipe/factory reset" but nothings happen..and now when I try to select one of the option in the recovery it shut off.. Kindly help me.. is the test point can restore it back?
Hi friend. I think that you have to install the ROM again and root the phone. After that install mobileuncletools you can find it on Playstore . You can type a new IMEI from this app. I've made it with mine.
sotirismac said:
Hi friend. I think that you have to install the ROM again and root the phone. After that install mobileuncletools you can find it on Playstore . You can type a new IMEI from this app. I've made it with mine.
Click to expand...
Click to collapse
Bro, it doesn't boot anymore.. How can i install the ROM if the pc doesn't connect to the device?
jelz2013 said:
Bro, it doesn't boot anymore.. How can i install the ROM if the pc doesn't connect to the device?
Click to expand...
Click to collapse
Ohh... I see... I have the same problem with another MTK 6589. I mede a reboot and then the phone died. I cannot do something to turn it on... I 'll send it back because it is in warranty now... I hope they will solve the problem.
---------- Post added at 02:39 PM ---------- Previous post was at 02:34 PM ----------
sotirismac said:
Ohh... I see... I have the same problem with another MTK 6589. I mede a reboot and then the phone died. I cannot do something to turn it on... I 'll send it back because it is in warranty now... I hope they will solve the problem.
Click to expand...
Click to collapse
Friend I just remebered something.
Try to install the drivers of the device. The rom can be installed with the phone turned off. There is a programm which installs it. It named "Smart phone flash tool". I use this programm and it is very good.
I have a tablet with this SoC Allwinner A83T. Its like a generic tablet (OEM) q102a. It has Android 5.1.1 what I managed to root with KingRoot. I followed this to replace KingRoot with SuperSU, and the device stuck in bootloop. Any help/solution would be appreciated. The tablet can go to recovery, but its an android recovery not custom. There is no ADB, ( adb cant see the device) and only what i found is .img image what I cant flash.
I found several frimware in here but dont know how can I flash it.
You can try Phoenixsuit this Flash tool.do you get rom?
52571abc said:
You can try Phoenixsuit this Flash tool.do you get rom?
Click to expand...
Click to collapse
yeah nice advice
hi
If you guys has any problem can ask me
cuz I flash my A31s tablet it was success!
i have that soc and trying to access boot loader just show the SPC logo and stay there.
the command 'C:\adb>fastboot.exe oem device-info
< waiting for device >
' isnt working.
help ?
Can you show me the photo?
For the SPC tablet dude (not the q102a), I found the original firmware for mine (Dark Glow model), it has only 2 buttons at the right side, Power and Back.
I can't post URLs, but just google for A83T_N102_N1021L1BC_20151123.img and you should find the location.
There are several firmwares there, check your model for the correct one!
Then flash it with PhoenixSuit and you are good to go!
If more help needed, just say it.
---------- Post added at 01:04 PM ---------- Previous post was at 12:24 PM ----------
Libi_79 said:
I have a tablet with this SoC Allwinner A83T. Its like a generic tablet (OEM) q102a. It has Android 5.1.1 what I managed to root with KingRoot. I followed URL to replace KingRoot with SuperSU, and the device stuck in bootloop. Any help/solution would be appreciated. The tablet can go to recovery, but its an android recovery not custom. There is no ADB, ( adb cant see the device) and only what i found is .img image what I cant flash.
I found several frimware in URL but dont know how can I flash it.
Click to expand...
Click to collapse
To flash the .img with PhoenixSuit (though I'm sure there are better tutorials out there):
Download and install PhoenixSuit in your PC (version I tried 1.0.0.1).
Open it; in the Firmware tab, browse the .img file and select it. If you click Upgrade, the program will say the device is not connected and it will show you instructions on how to put the tablet in Upgrade Mode, which I'll say now. Make sure the tablet battery is full.
With the tablet shut down, press and keep holding the volume buttons (+ and -, in case it has no volume buttons, any other buttons that are not the power button).
While pressing them, connect the tablet with the USB cable, then press the power button at least 10 times until your computer recognizes a new hardware. You can now release all buttons. Allow installation of this new hardware.
If it went OK, then PhoenixSuit should automatically recognize it and a window will appear asking to format, say Yes to all and wait for flash to finish. It should say Succeed at the end. You can now unplug the tablet, close PhoenixSuit and wait till the tablet starts up on its own (it can take some minutes with a new installation ).
GiantChicken said:
For the SPC tablet dude (not the q102a), I found the original firmware for mine (Dark Glow model), it has only 2 buttons at the right side, Power and Back.
I can't post URLs, but just google for A83T_N102_N1021L1BC_20151123.img and you should find the location.
There are several firmwares there, check your model for the correct one!
Then flash it with PhoenixSuit and you are good to go!
If more help needed, just say it.
---------- Post added at 01:04 PM ---------- Previous post was at 12:24 PM ----------
To flash the .img with PhoenixSuit (though I'm sure there are better tutorials out there):
Download and install PhoenixSuit in your PC (version I tried 1.0.0.1).
Open it; in the Firmware tab, browse the .img file and select it. If you click Upgrade, the program will say the device is not connected and it will show you instructions on how to put the tablet in Upgrade Mode, which I'll say now. Make sure the tablet battery is full.
With the tablet shut down, press and keep holding the volume buttons (+ and -, in case it has no volume buttons, any other buttons that are not the power button).
While pressing them, connect the tablet with the USB cable, then press the power button at least 10 times until your computer recognizes a new hardware. You can now release all buttons. Allow installation of this new hardware.
If it went OK, then PhoenixSuit should automatically recognize it and a window will appear asking to format, say Yes to all and wait for flash to finish. It should say Succeed at the end. You can now unplug the tablet, close PhoenixSuit and wait till the tablet starts up on its own (it can take some minutes with a new installation ).
Click to expand...
Click to collapse
I have some device
---------- Post added at 09:38 AM ---------- Previous post was at 09:37 AM ----------
52571abc said:
I have some device
Click to expand...
Click to collapse
I can help you
---------- Post added at 09:44 AM ---------- Previous post was at 09:38 AM ----------
52571abc said:
I have some device
---------- Post added at 09:38 AM ---------- Previous post was at 09:37 AM ----------
I can help you
Click to expand...
Click to collapse
Same device (wrong word sorry)
52571abc said:
I have some device
---------- Post added at 09:38 AM ---------- Previous post was at 09:37 AM ----------
I can help you
---------- Post added at 09:44 AM ---------- Previous post was at 09:38 AM ----------
Same device (wrong word sorry)
Click to expand...
Click to collapse
????
The HIPO A106T Android 5.1 has the same processor. Can I root it do you think?
baconboy said:
The HIPO A106T Android 5.1 has the same processor. Can I root it do you think?
Click to expand...
Click to collapse
I think you can try kingroot first
52571abc said:
I think you can try kingroot first
Click to expand...
Click to collapse
Is you tablet board look like this?
Has anyone found a modified (for this 9 inch Supersonic/Allwinner A83 1024*600) recovery? I've gotten the recoveries (TWRP) for an X10 tablet to flash, but the touch screen is inoperative.
try kingroot first
baconboy said:
The HIPO A106T Android 5.1 has the same processor. Can I root it do you think?
Click to expand...
Click to collapse
you can try kingroot first if you get root you can backup you rom first
rom backup teach :https://www.youtube.com/watch?v=C59zFu63BDU
---------- Post added at 02:50 PM ---------- Previous post was at 02:46 PM ----------
actionville said:
Has anyone found a modified (for this 9 inch Supersonic/Allwinner A83 1024*600) recovery? I've gotten the recoveries (TWRP) for an X10 tablet to flash, but the touch screen is inoperative.
Click to expand...
Click to collapse
can you show me your tablet photo or website\
I hate to open this thread back up, but I have acquired a chinese tablet A83t-N106. I got this from a business close out purchase.
I was some type of customer loyalty program. The screen worked but had a limited android OS on it. I used the PhoenixSuite to access the details.
I found this was the OS installed "A83T_N106_N1061L6BC_20160309-ok.img" I found this from a Chinese website. I flashed it without any error. I cannot get the screen to show anything. If i connect to my computer it sees the device and I can move/delete/add files to the files system.
Hi
could someone please send me stock rom for Alcatel pop 4, My phone is stuck on Alcatel logo after installing a theme and i have tried everything but i can't find a rom anywhere on internet.
Thank You
I have the same problem and I can´t find any.
GolpeadorMágico said:
I have the same problem and I can´t find any.
Click to expand...
Click to collapse
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
JordieSnipezHD said:
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
Click to expand...
Click to collapse
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
GolpeadorMágico said:
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
Click to expand...
Click to collapse
I could upload twrp backup if help
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Please, I´m going to try anything for recover it.
GolpeadorMágico said:
Please, I´m going to try anything for recover it.
Click to expand...
Click to collapse
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
Click to expand...
Click to collapse
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
Click to expand...
Click to collapse
I will never buy another there's no development or ROMs nothing I have installed exposed and root
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
I will never buy another there's no development or ROMs nothing I have installed exposed and root
Click to expand...
Click to collapse
Yeah, this mobile sucks. My mom lend me it and its horrible. I lost the system (you know) and the mobile update (Alcatel) don´t do any. I put it, the mobile sometimes its not recognized... No more. Alcatel, not again.
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
zbaracki said:
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
Click to expand...
Click to collapse
Can u get into twrp recovery
mygadgetgeek.com said:
Can u get into twrp recovery
Click to expand...
Click to collapse
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
zbaracki said:
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
Click to expand...
Click to collapse
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Cryonics said:
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Click to expand...
Click to collapse
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
zbaracki said:
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
Click to expand...
Click to collapse
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
bulletbeef said:
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
Click to expand...
Click to collapse
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
zbaracki said:
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
Click to expand...
Click to collapse
i had the same issue searched everywhere and nobody gave good drivers or complete answers not even alcatel themselves, so i figured it out, that's what this community is for
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
Click to expand...
Click to collapse
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
I succesefuly installed the stock rom witout mobile upgrade mobil
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
Click to expand...
Click to collapse
I had the same issue i was unable to install the stock rom using mobile upgrade it will say this is the last firmware there is no new update so i searched the web and i found a solution finaly its callad a software named sugar
what you need is a usb cable a good internet conection and drivers installed
make sure to follow instruction of the software to download
you will find the all instructions on this russian thread https://4pda.ru/forum/index.php?showtopic=675134&st=440#entry46026273
if you need any help just send me a pm
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Removed:
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Can you upload your twrp backup, or at least your stock recovery pleeease? I really need it since this is my work phone and it should be as stock as it came when they check it.
Good afternoon, I have a g4 MOTO plus replica MT6580, was connected to flash without flash tool, and the process was halted, and now the flashtool not recognized anymore the device, but the device is recognized by the usb when plugged.
Sorry my bad english.
Which flashtool were you using? Is your phone still working or is it bricked?
Augustoandro said:
Which flashtool were you using? Is your phone still working or is it bricked?
Click to expand...
Click to collapse
I was using Pack-Flashtool-v5.1640.00.000, already tried with 5.17 as well.
The phone does not turn on, does not appear to be charging.
Only the computer recognizes it, when I try to use the flashtool again presents me with a lot of errors, which I did not give before, it's just the red bar.
Try keeping the phone on until the battery drains out, I was stuck on a similar situation once.
---------- Post added at 11:21 AM ---------- Previous post was at 11:20 AM ----------
yurisalt said:
I was using Pack-Flashtool-v5.1640.00.000, already tried with 5.17 as well.
The phone does not turn on, does not appear to be charging.
Only the computer recognizes it, when I try to use the flashtool again presents me with a lot of errors, which I did not give before, it's just the red bar.
Click to expand...
Click to collapse
Try keeping the phone on until battery drains out, I was in a similar situation once.