Related
hello i have LG L9 (LGP768G) its death,when i plug it with usb cable in my laptop with windows 7, it detect the cellphone but suddenly cut off, and later it detect it again and cut off again and repeat repeat over and over,it doesnt turn on, no leds, no lights, no display, nothing, what can i do??i can stop it just for a minute and it detect and says lg usb modem, after a few minutes it cut off again,i can do that with a program, fastboot, i chose the option number 4, i plug the cellphone without battery holding volume up, the process starts and i put the battery back and thats its the moment when the computer detect it in lg usb modem but the cellphone never turn on, nothing, just that, please help
please somebody help me please
kira99 said:
please somebody help me please
Click to expand...
Click to collapse
Please give more information.
- Your latest installed firmware
- What you did before it cannot turn on.
- From your post, your phone can turn on to S/W update mode, right?
- Did your battery fully charge?
artit said:
Please give more information.
- Your latest installed firmware
- What you did before it cannot turn on.
- From your post, your phone can turn on to S/W update mode, right?
- Did your battery fully charge?
Click to expand...
Click to collapse
hello thanks for your time, well i try to update and my battery run out,i dont remember the android version neither the firmware, the L9 p768g its telcel, the only way its pluging with the usb cable to my laptop, holding volume up and without battery,and runningg a software called fastboot,thats the only way, and later the software original LG support says an update its avaible, but i cant finish the process because the cellphone cut off the conection after a few minutes, i dont know what to do my battery its fully charged
kira99 said:
hello thanks for your time, well i try to update and my battery run out,i dont remember the android version neither the firmware, the L9 p768g its telcel, the only way its pluging with the usb cable to my laptop, holding volume up and without battery,and runningg a software called fastboot,thats the only way, and later the software original LG support says an update its avaible, but i cant finish the process because the cellphone cut off the conection after a few minutes, i dont know what to do my battery its fully charged
Click to expand...
Click to collapse
Try a different USB cable.
Ilxaot said:
Try a different USB cable.
Click to expand...
Click to collapse
hello thanks for your answer, i already did that i have 3 different usb cables
kira99 said:
hello thanks for your answer, i already did that i have 3 different usb cables
Click to expand...
Click to collapse
i had the same problem, i tried EVERYTHING
after two days, i sent it to the shop where i got it from, they fixed it
don't lose more time, just let them do it
U Need To rest your mobile
When you can try root that is very fault for our mobile if we rooted our mobile then we face very huge prob you can go market or mobile special and just request please reset my mobile now (inshallah)Your mobile will ok
---------- Post added at 12:12 PM ---------- Previous post was at 12:06 PM ----------
You know about LG Optimus L9 P768 its internal memory is to low so i can't installed HD game in this mobile I want to install In external how i can do this please help me
Thanks
Also send me sloution in tis EMAIL_ID : ([email protected])
Regard : Naveel Haroon
kira99 said:
please somebody help me please
Click to expand...
Click to collapse
How did your phone mess up? If you didn't do any thing to it and it just turned off for no reason, you have a hardware failure. We can't help you if that's the case.
Sent from my LGMS769 using XDA Premium 4 mobile app
hello,
my Xperia P's Usb port is now working it's charging but couldn't connect to any PC or OTG Media ....
as PC connection not working so i m unable to flash my phone in flashboot mode.
i tried to consult to service center guys they say as my device is rooted they can't help me fix this problem....
i don't want to loose my phone please help me.... every thing in my phone is brand new and original but as i use custom kernel & rom ...so they are not accepting my phone ....
is there any other way i can use to flash my device to stock ... so i can get it fixed .
i can turn on my phone but it shows no sim no wifi ...
please help...
thanking you
Have you checked that flash mode is not working?
Is it charging when connected to the PC, try another USB cable.
No wifi wuth and without SIM installed?
How this problem began, have you dropped your phone or installed some software?
ChikeD said:
Have you checked that flash mode is not working?
Is it charging when connected to the PC, try another USB cable.
No wifi wuth and without SIM installed?
How this problem began, have you dropped your phone or installed some software?
Click to expand...
Click to collapse
yes i checked .. flash mode is not working not even fastboot mode ...
yes it's charging ...i tried 4-5 different cables ...i also checked cables with my brother's phone they were working fine...
it started a week before everything was working great i tried to connect my device i thought it would b new rom's problem so it will b fixed... so i try to flash other rom but accidentally i formatted system after wiping data and factory reset ... but that rom hangs as it says unable to mount system...
i try the older rom it flashed but in about phone there's baseband version is unknown, wifi was not turning on and i can't gain root access via terminal emulator or titanium backup or any other root app...
i thought to revert everything back via flashtool but my device couldn't be connected in flash mode... green light goes on n turned to red again and battery start to charge ...
sorry for wrong english ...
but thanks for your interest and reply ...
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
ChikeD said:
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
Click to expand...
Click to collapse
hello,
yes i had used flashtool near about 40-60 times before on same pc on same phone on my brother still uses the same ...
miteshlakhwani said:
hello,
yes i had used flashtool near about 40-60 times before on same pc on same phone on my brother still uses the same ...
Click to expand...
Click to collapse
What do you see in flashtool log when trying to connect in fastboot mode?
Make sure the phone is off before you do.
ChikeD said:
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
Click to expand...
Click to collapse
i also try to get it diagnosed at local street repair shop as sony service center guys behaved really bad with me ... not even check my device they turn it on instead of sony logo it shows nemesis kernel logo so they say your device is rooted we can't accept it ...
i felt v.bad ...
local street repair guy told me to leave my device with hi for a day or 2 ... but i don't trust them so i couldn't do that...
he told me that port is ok it might b an ic chip which get's fungus or any kind of short circuit is happening there only ...
i m totally confused
thanks for ur reply
ChikeD said:
What do you see in flashtool log when trying to connect in fastboot mode?
Make sure the phone is off before you do.
Click to expand...
Click to collapse
it load up the ftf file .. n then ask me to connect my phone in fastboot mode as i had done it earlier many times...
first power off my device... wait for a minute then ...
then press vol down key n connect it to pc..
green notification light goes on... and then turn in red and phone shows nemesis logo n then offline battery charging logo...
in my pc nothing happen it still ask for my device in flashmode...
miteshlakhwani said:
it load up the ftf file .. n then ask me to connect my phone in fastboot mode as i had done it earlier many times...
first power off my device... wait for a minute then ...
then press vol down key n connect it to pc..
green notification light goes on... and then turn in red and phone shows nemesis logo n then offline battery charging logo...
in my pc nothing happen it still ask for my device in flashmode...
Click to expand...
Click to collapse
Just open flashtool lwindow, no flash anything, and connect your device in fastboot mode.
Anything in the log?
It might be the USB connection, I tried to fastboot connecting to my charger, the led turn on blue for 5 seconds then go to charging.
Same with flash mode.
ChikeD said:
Just open flashtool lwindow, no flash anything, and connect your device in fastboot mode.
Anything in the log?
It might be the USB connection, I tried to fastboot connecting to my charger, the led turn on blue for 5 seconds then go to charging.
Same with flash mode.
Click to expand...
Click to collapse
no it doesn't shows any thing ...
yes the same thing happens when i try to connect my phone to my pc in flash mode ....
(sorry for late reply i m facing some problems with my internet connection as it's stormy here)
miteshlakhwani said:
no it doesn't shows any thing ...
yes the same thing happens when i try to connect my phone to my pc in flash mode ....
(sorry for late reply i m facing some problems with my internet connection as it's stormy here)
Click to expand...
Click to collapse
Looks like hardware problem to be, either the connecter itself or chip.
How much would it cost to replace it, or maybe can they check connectivity.
If you enter CWM and connect it to the PC is there any indication it's connected?
ChikeD said:
Looks like hardware problem to be, either the connecter itself or chip.
How much would it cost to replace it, or maybe can they check connectivity.
If you enter CWM and connect it to the PC is there any indication it's connected?
Click to expand...
Click to collapse
i also tried that too in CWm too there's no sign of any connection in pc ...
service center guy said that replacing port is not possible so they had to replace complete board ... n that will cost around 80% of cost of device....
but they won't do it as my device is rooted ...
This happened with my S3 just recently and they swore it wasn't the USB connector if it would charge. I called T-Mobile and got upset and told them I plug in an identical S3 and it shows immediately with mine it won't not even in download mode. They swapped it out for me.
If possible just flash stock firmware via cwm. And send to service center
Correct me if I'm wrong
dara007_168 said:
If possible just flash stock firmware via cwm. And send to service center
Correct me if I'm wrong
Click to expand...
Click to collapse
And how exactly are you going to put it on the device, with no wifi or ysb connection?
Unless by a chance bluetooth is working.
ChikeD said:
And how exactly are you going to put it on the device, with no wifi or ysb connection?
Unless by a chance bluetooth is working.
Click to expand...
Click to collapse
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
dara007_168 said:
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
Click to expand...
Click to collapse
No SD card, and you can relock BL, but not without flashtool.
dara007_168 said:
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
Click to expand...
Click to collapse
thanks for your support but Bluetooth isn't working too ...
last night i downloaded disassembly guide of xperia P & as doubt by local repair man that it my b some type of clogging in port or in system board... i disassembled my phone step by step as directed in gude i took our board clean port & board thoroughly ... and put it back ... but that wont helped too ...
it feels completely helpless ...
i m having my phone in my hand ... it turns on ... n off only ..
my mistake was that i formatted the system from CWM ...if i didn't done that i can flash any of 2 roms in my sd card or can use my phone ....
thank you for all yours reply and time, it's really appreciable .... :good:
miteshlakhwani said:
thanks for your support but Bluetooth isn't working too ...
last night i downloaded disassembly guide of xperia P & as doubt by local repair man that it my b some type of clogging in port or in system board... i disassembled my phone step by step as directed in gude i took our board clean port & board thoroughly ... and put it back ... but that wont helped too ...
it feels completely helpless ...
i m having my phone in my hand ... it turns on ... n off only ..
my mistake was that i formatted the system from CWM ...if i didn't done that i can flash any of 2 roms in my sd card or can use my phone ....
thank you for all yours reply and time, it's really appreciable .... :good:
Click to expand...
Click to collapse
Bro I think the only way to fix it is to replace the hold new system. But it's cost alot
Sent from my ST25i using xda app-developers app
dara007_168 said:
Bro I think the only way to fix it is to replace the hold new system. But it's cost alot
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
yes i enquire about replacing board from sony service center they told it will cost approx 80% of cost of mobile ...
Hey guys i have been using my dell tablet for more than a year. I also rooted it at the same time i bought the tab. Now a week ago when i was using my tab it was completly turned off. I have tried charging it for a day nothing happens. it dosent Show any Boot animation or charging animation nor does it even enter fastboot mode. It doesn't even turn on. It has just become like a paper weight. When i connect it to pc, it shows under the Device Manager CLOVERVIEW PLUS Device. I checked out some other posts and it shows reflashing it through xFTSK, but i searched everywhere but it doesn't have any firmware or software for Dell Venue 7 HSPA+ 3730. Pls Guys Help me out here, really appreciated. Thanks.
can you boot into the fastboot mode?
Huzaifa_Aziz said:
can you boot into the fastboot mode?
Click to expand...
Click to collapse
No, I cannot. it doesn't give any response, only when conected to pc it shows CloverView Plus in Device Manager.
ssjdeepanshu said:
No, I cannot. it doesn't give any response, only when conected to pc it shows CloverView Plus in Device Manager.
Click to expand...
Click to collapse
I'm really sorry for replying late, was stuck in an issue of my own with S6 Edge, okay so, when you put it on charge does it show up "charging" ?? like the Cell with charging animation shows up?
---------- Post added at 04:10 AM ---------- Previous post was at 03:56 AM ----------
ssjdeepanshu said:
No, I cannot. it doesn't give any response, only when conected to pc it shows CloverView Plus in Device Manager.
Click to expand...
Click to collapse
if it is showing up a response in Device Manager then it means your boot is still alive. There is hope brother, so first of all we need to know if it has juice or not?
also please READ some stuff here http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
and download and extract this package http://https://www.androidfilehost.com/?fid=23622183712464837 from @social-design-concepts and please don't flash stuff just right away. I would suggest that you read first what they have to say, then cautiously proceed with the Toolkit.
do also thank @social-design-concepts on his thread by the way.. :good:
---------- Post added at 04:25 AM ---------- Previous post was at 04:10 AM ----------
ssjdeepanshu said:
No, I cannot. it doesn't give any response, only when conected to pc it shows CloverView Plus in Device Manager.
Click to expand...
Click to collapse
and then there is the good old METHOD number 2,
it's easier as far as I know,
make an easy ADB folder.
Just boot in FASTBOOT mode.
extract the ::Venue_7_3G_KK4.4.2v1.33_FLASHPKG.7z:: archive
and take out Venue_7_3G_KK4.4.2v1.33.system.img.gz (place it in same folder as adb.
after that in fastboot mode
write command
fastboot flash system Venue_7_3G_KK4.4.2v1.33.system.img.gz
Click to expand...
Click to collapse
wait for it to finish.
after that fastboot reboot
and profit!
Sorry for replying late, but as i said earlier it doesn't show any charging animation or enters the fastboot mode but when connected to pc it shows CloverView Plus in the device manager. i am just confused is it even alive or not.....
ssjdeepanshu said:
Sorry for replying late, but as i said earlier it doesn't show any charging animation or enters the fastboot mode but when connected to pc it shows CloverView Plus in the device manager. i am just confused is it even alive or not.....
Click to expand...
Click to collapse
It might be possible that the charging IC has been damaged, if after a continuous 2/3 hour connection with PC/charger the tablet does not turn on. Means it isn't getting enough charge to even boot up. It might be a good idea to get it checked by a technician but I am afraid parts/ replacements and finding an expert on Dell devices is quiet rare because of it's less popularity.
yeah even i am thinking it is a hardware problem, if i was a software problem, i might have been able to solve it on my own.
Anyway's thanks for help.
ssjdeepanshu said:
yeah even i am thinking it is a hardware problem, if i was a software problem, i might have been able to solve it on my own.
Anyway's thanks for help.
Click to expand...
Click to collapse
You are welcome!
I wonder what became of your tablet...
Huzaifa_Aziz said:
You are welcome!
I wonder what became of your tablet...
Click to expand...
Click to collapse
It's now just a useless paper weight :crying:
ssjdeepanshu said:
It's now just a useless paper weight :crying:
Click to expand...
Click to collapse
you know I found that tablet to be indestructible. up till now at least. still running even though I corrupted its recovery once.
Hello,
I think i bricked my phone.
I unlocked the bootloader with ADB and then was trying to flash CWM for rooting the device, and after ADB told me that it was flashed succesfully, i rebooted my phone and now is stuck on Archos logo. Bootloop, the phone is detected by my pc, because you can hear the sound when u pin the usb, but i don't have access to it. Windows says there's a problem with this device and can't recognize it.
However, now it's not even bootloop anymore, the phonte screen just turned black, no more bootloop, no more vibration, no more nothing. The only thing is this windows sound when plug in the phone.
Actually, i try to fix it with SP Flashtool, but i'll be thankful if anyone helps.
Have a nice day.
#Edit: Archos 55 Helium
lengockhanhhai said:
Me too.help plz
Click to expand...
Click to collapse
??
up
up
help pleas, it's really important
UP
Did you try leaving the phone on until the battery drains out? Worked for me once.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
If it doesn't work, try flashing the stock recovery for your phone using adb. I hope you took a backup of it, but if not, begin searching the web for it.
Does your phone has a forum of its own on XDA?
If yes, you may ask there for the stock recovery.
Augustoandro said:
Did you try leaving the phone on until the battery drains out? Worked for me once.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
If it doesn't work, try flashing the stock recovery for your phone using adb. I hope you took a backup of it, but if not, begin searching the web for it.
Does your phone has a forum of its own on XDA?
If yes, you may ask there for the stock recovery.
Click to expand...
Click to collapse
Hey and thank's for your reply,
The battery is already drained out, but nothings changed.
Also, how can i flash a stock recovery if adb and fastboot doesn not even recognize my phone right now? I have a recovery and stock rom, but no utility to flasht them.
SP Flashtool started to do the job, but failed after with some errors messages :/
Also it doesn not have a XDA forum, it's a not-known yet brand.
Hi I have a p760 that if I connect to my computer appears and disappears "omap4430" to infinity and if I try to flash through something fastboot says that the partition does not exist. (with omap4boot)
Try again and try again and try again, while partitions will be flashable
Andvelop said:
Try again and try again and try again, while partitions will be flashable
Click to expand...
Click to collapse
Please there are no alternatives? I've been trying for some time and it does not do anything. Perhaps I have not tried for quite some time?
up, I have the same and identical problem, how do I fix?
Up
Up
XRed_CubeX said:
Up
Click to expand...
Click to collapse
Hi, maybe look at 4pda, with a translator, and register for download if necessary. I have an unlocked bootloader and no such problems. Maybe I did not understand your problem correctly, but if the driver simply does not work, then you need to try other drivers, delete old ones, try other programs.
My L9 for an unknown reason stopped working, now when I connect it to the PC with and without battery, OMAP4430 appears and disappears infinitely without stopping, the drivers with W10 are incompatible, in fact I have the dualboot with W7 in VHD, using scripts as OMAP4Boot I am able to have the phone in fastboot but the phone shows that the partitions do not exist, it does not start in any mode only OMAP4430 convertible into Fastboot.
---------- Post added at 06:32 PM ---------- Previous post was at 06:28 PM ----------
P.S:And I don't understand Russian, I don't have a Russian keyboard, I'm Italian, I can't do captcha
I tried a guide on 4pda(https://4pda.ru/forum/index.php?showtopic=310832&view=findpost&p=19622299) but at some point it blocks me at 24% in the flash.
Up
XRed_CubeX said:
My L9 for an unknown reason stopped working, now when I connect it to the PC with and without battery, OMAP4430 appears and disappears infinitely without stopping, the drivers with W10 are incompatible, in fact I have the dualboot with W7 in VHD, using scripts as OMAP4Boot I am able to have the phone in fastboot but the phone shows that the partitions do not exist, it does not start in any mode only OMAP4430 convertible into Fastboot.
---------- Post added at 06:32 PM ---------- Previous post was at 06:28 PM ----------
P.S:And I don't understand Russian, I don't have a Russian keyboard, I'm Italian, I can't do captcha
Click to expand...
Click to collapse
The instructions say that the error should occur, this is normal. This instruction recovers the bootloader only. Maybe now you just need to flash using the LG Flash Tool. Allow another option that your phone could just break, for example, the memory deteriorated, and this is just not fix it.
Does the phone enter sw / upgrade mode? To see, connect the switched off phone with the volume + button pressed to the computer turned on. If it is, find your phone on lg.com, come in support, choose software and firmware, then option 2, Install USB DRIVER, Download and install LG MOBILE SUPPORT TOOL, enter sw / upgrade mode, launch LG MOBILE SUPPORT TOOL Wait for the connection, then select the recovery after the error in the additional options, and wait.
On the site lg.com, if you choose some countries, for example Italy, and others, you cannot find the product p760 or p765, so put the country Russia, in Russia only p765, or Germany, there p760. In USA only p769. Although all the drivers and LG MOBILE SUPPORT TOOL are the same, you can download anywhere.
No, it doesn't work, otherwise I wouldn't have tried it after the flash?
XRed_CubeX said:
No, it doesn't work, otherwise I wouldn't have tried it after the flash?
Click to expand...
Click to collapse
Clear. This phone is already in the past. If you can not find a solution for all forums and topics, then it is probably useless. I did not have such a problem, I unlocked the bootloader, it was that the custom recovery and custom firmware were breaking, and there was a brick, but through fastboot I was reinstalling the recovery again. Yes, there constantly the phone is connected, then disconnected, but after 3-5 times it stops and the recovery is stitched. You need to constantly connect, disconnect the phone, start the process again. You also need to catch the device in Device Manager in order to install the driver. Maybe someone else will help you, but I'm not sure. You have a strange problem if it just happened. Perhaps I have already said that the phone broke, not the software.
webdiman said:
Clear. This phone is already in the past. If you can not find a solution for all forums and topics, then it is probably useless. I did not have such a problem, I unlocked the bootloader, it was that the custom recovery and custom firmware were breaking, and there was a brick, but through fastboot I was reinstalling the recovery again. Yes, there constantly the phone is connected, then disconnected, but after 3-5 times it stops and the recovery is stitched. You need to constantly connect, disconnect the phone, start the process again. You also need to catch the device in Device Manager in order to install the driver. Maybe someone else will help you, but I'm not sure. You have a strange problem if it just happened. Perhaps I have already said that the phone broke, not the software.
Click to expand...
Click to collapse
It tells me that partitions do not exist.
I tried but it connects to me and disconnects indefinitely, so I'm done doing it only 3-5 to me it doesn't work.
XRed_CubeX said:
I tried but it connects to me and disconnects indefinitely, so I'm done doing it only 3-5 to me it doesn't work.
Click to expand...
Click to collapse
If fastboot writes that there are no partitions, then I think that the memory most likely died, otherwise you just have to install different drivers, do it correctly, delete the old ones, reboot, install new ones, try usb 2.0 and 3.0,It may be hampered by the antivirus, try to turn it off during the operation, in general all possible ways Try to disassemble the phone, reconnect all contacts. Try another usb wire, clean the usb contacts on the phone. New will be nothing. Since 2016, no one has done anything for this phone. On 4pda I read about a similar problem, no one was able to solve it, and those who decided, they had another problem. One person suddenly the next day, the phone began to enter the sw / upgrade mode, and the other turns out to be the phone entered this mode, and he thought he had the same problem, then just flashed the firmware.
Perhaps you are not doing the right thing according to the instructions. To put the driver on the omap it is necessary to catch it once, open the installation window manually, and install it, and let the phone itself always turn off and connect, it does not matter. The driver will already stand.
Even when I am fixing the recovery through the fastboot, there is an inscription everything is OK, but the phone does not go into the recovery if you turn it off and clamp the buttons. I am flashing, and I am not disconnecting anything, just waiting for 1-2 minutes, and the phone itself restarts in recovery. I do not know why.
I will try all these tips, but I have to tell you the truth, my phone had 2 identical bricks and the same problem, but at the first, something strange happened, fiddling with the lelus script using key combinations, my phone had entered into S / W upgrade, since I didn't have the flash tool installed, I turned it off, thinking I had solved the problem, trying to turn it on, it made a security error and from then on it was bricked again. The S / W mode was not the strange one without a screen, it was the correct one, I have to try again to make combinations, I had tried the combinations of a guide called: "how to fix partition problem"
---------- Post added at 06:30 AM ---------- Previous post was at 06:28 AM ----------
P.S:But if I can fix it, I'll instantly guide you on what I did to fix it, everyone has to solve this problem. Send me the correct OMAP driver link.
XRed_CubeX said:
I will try all these tips, but I have to tell you the truth, my phone had 2 identical bricks and the same problem, but at the first, something strange happened, fiddling with the lelus script using key combinations, my phone had entered into S / W upgrade, since I didn't have the flash tool installed, I turned it off, thinking I had solved the problem, trying to turn it on, it made a security error and from then on it was bricked again. The S / W mode was not the strange one without a screen, it was the correct one, I have to try again to make combinations, I had tried the combinations of a guide called: "how to fix partition problem"
---------- Post added at 06:30 AM ---------- Previous post was at 06:28 AM ----------
P.S:But if I can fix it, I'll instantly guide you on what I did to fix it, everyone has to solve this problem. Send me the correct OMAP driver link.
Click to expand...
Click to collapse
Here is the most detailed instructions for recovery, but in Russian, I am from Russia, you can translate (4pda.ru/forum/index.php?showtopic=406521&st=7620#entry32936537) If I am mistaken with the instruction, then I'm sorry. There are drivers too. Here on the fastboot, maybe you need something else to install on your computer (https://forum.xda-developers.com/showthread.php?t=2588979) my adb has always been installed a long time ago, maybe that's why it works. I also read such a case. One user did not enter the S / W mode, but he still pressed the volume + and connected to the computer, and the flashtool identified the phone and started updating the firmware.
Here are the official drivers and LG MOBILE SUPPORT TOOL ( lg.com/ru/support/support-mobile/lg-P765 )
1) You may be doing something wrong
2) No one had this problem, no one solved it. You decide.
3) This problem was someone else, he did not talk about it and threw out the phone. Therefore, no one solved it. You decide.
4) The memory of the phone is dead. Nothing you can probably.
5) I hardly know English, I rarely help someone, I was interested in using a translator, thank you, if you at least understand something.
I reiterate that partitions do not exist so I don't think I can delete the boot partition.
I tried the guide but the partitions keep saying that they don't exist, what do I do?