Hey guys i have been using my dell tablet for more than a year. I also rooted it at the same time i bought the tab. Now a week ago when i was using my tab it was completly turned off. I have tried charging it for a day nothing happens. it dosent Show any Boot animation or charging animation nor does it even enter fastboot mode. It doesn't even turn on. It has just become like a paper weight. When i connect it to pc, it shows under the Device Manager CLOVERVIEW PLUS Device. I checked out some other posts and it shows reflashing it through xFTSK, but i searched everywhere but it doesn't have any firmware or software for Dell Venue 7 HSPA+ 3730. Pls Guys Help me out here, really appreciated. Thanks.
can you boot into the fastboot mode?
Huzaifa_Aziz said:
can you boot into the fastboot mode?
Click to expand...
Click to collapse
No, I cannot. it doesn't give any response, only when conected to pc it shows CloverView Plus in Device Manager.
ssjdeepanshu said:
No, I cannot. it doesn't give any response, only when conected to pc it shows CloverView Plus in Device Manager.
Click to expand...
Click to collapse
I'm really sorry for replying late, was stuck in an issue of my own with S6 Edge, okay so, when you put it on charge does it show up "charging" ?? like the Cell with charging animation shows up?
---------- Post added at 04:10 AM ---------- Previous post was at 03:56 AM ----------
ssjdeepanshu said:
No, I cannot. it doesn't give any response, only when conected to pc it shows CloverView Plus in Device Manager.
Click to expand...
Click to collapse
if it is showing up a response in Device Manager then it means your boot is still alive. There is hope brother, so first of all we need to know if it has juice or not?
also please READ some stuff here http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
and download and extract this package http://https://www.androidfilehost.com/?fid=23622183712464837 from @social-design-concepts and please don't flash stuff just right away. I would suggest that you read first what they have to say, then cautiously proceed with the Toolkit.
do also thank @social-design-concepts on his thread by the way.. :good:
---------- Post added at 04:25 AM ---------- Previous post was at 04:10 AM ----------
ssjdeepanshu said:
No, I cannot. it doesn't give any response, only when conected to pc it shows CloverView Plus in Device Manager.
Click to expand...
Click to collapse
and then there is the good old METHOD number 2,
it's easier as far as I know,
make an easy ADB folder.
Just boot in FASTBOOT mode.
extract the ::Venue_7_3G_KK4.4.2v1.33_FLASHPKG.7z:: archive
and take out Venue_7_3G_KK4.4.2v1.33.system.img.gz (place it in same folder as adb.
after that in fastboot mode
write command
fastboot flash system Venue_7_3G_KK4.4.2v1.33.system.img.gz
Click to expand...
Click to collapse
wait for it to finish.
after that fastboot reboot
and profit!
Sorry for replying late, but as i said earlier it doesn't show any charging animation or enters the fastboot mode but when connected to pc it shows CloverView Plus in the device manager. i am just confused is it even alive or not.....
ssjdeepanshu said:
Sorry for replying late, but as i said earlier it doesn't show any charging animation or enters the fastboot mode but when connected to pc it shows CloverView Plus in the device manager. i am just confused is it even alive or not.....
Click to expand...
Click to collapse
It might be possible that the charging IC has been damaged, if after a continuous 2/3 hour connection with PC/charger the tablet does not turn on. Means it isn't getting enough charge to even boot up. It might be a good idea to get it checked by a technician but I am afraid parts/ replacements and finding an expert on Dell devices is quiet rare because of it's less popularity.
yeah even i am thinking it is a hardware problem, if i was a software problem, i might have been able to solve it on my own.
Anyway's thanks for help.
ssjdeepanshu said:
yeah even i am thinking it is a hardware problem, if i was a software problem, i might have been able to solve it on my own.
Anyway's thanks for help.
Click to expand...
Click to collapse
You are welcome!
I wonder what became of your tablet...
Huzaifa_Aziz said:
You are welcome!
I wonder what became of your tablet...
Click to expand...
Click to collapse
It's now just a useless paper weight :crying:
ssjdeepanshu said:
It's now just a useless paper weight :crying:
Click to expand...
Click to collapse
you know I found that tablet to be indestructible. up till now at least. still running even though I corrupted its recovery once.
Related
hey guys new to this place, not that new, i've always search this forum for some rom or how to fix stuff and other help but never post anything here.
so lets get straight to the point. so basically i want to revive my old samsung galaxy tab 10.1. you know, for fun and nostalgia haha (if possible). so i don't really remember what i did to this tablet that it becomes like what it is today. cannot be turned on, no display when charging, no nothing. i do remember rooting it before. when it charge, there is a little warm going on on the tablet but nothing happen. when i connect it to my pc, it recognize it as unknown device the first time, and then i hold the power button for couple of second and my pc recognize it again but now as apx but no driver available. so i made a little research just now and i found that the tablet may have a chance to be fix with the use of nvflash or something. so all im saying is it really my tab can be fix without spending money? if can how do i do it? i have a little experience about flashing rom and recovery. but nothing on how to use nvflash. i do really appreciate your help to bring me back this tab that meant so much for me and my family back in the days.
http://www.gsmforum.ru/threads/223383-Samsung-GT-P7500-%D0%BE%D0%BF%D1%80%D0%B5%D0%B4%D0%B5%D0%BB%D1%8F%D0%B5%D1%82%D1%81%D1%8F-%D0%BA%D0%B0%D0%BA-APX
you download this files...let me know if you fix your tab
so its seems that i need to register for to download 3 files right? now im waiting for the email confirmation which take too long
yes, i can't upload this files...there's a error! did you downloaded 3 files and runned the process? the user doesn't write after the process but i think problem fixed. Ask you with topic when you registe youself...
jackfiq said:
so its seems that i need to register for to download 3 files right? now im waiting for the email confirmation which take too long
Click to expand...
Click to collapse
i can upload only 1 file of 3 files.... 2 files're > of 20MB...let me know if you fix your tab
bollicine said:
i can upload only 1 file of 3 files.... 2 files're > of 20MB...let me know if you fix your tab
Click to expand...
Click to collapse
can you guide me on how to do it? from start till end. thank you soo much for helping me out
jackfiq said:
can you guide me on how to do it? from start till end. thank you soo much for helping me out
Click to expand...
Click to collapse
1) to install apx driver (NVIDIA driver )
2) to run file .batch
i think this! you check now and write the result!
https://forum.xda-developers.com/showthread.php?t=1130574]
bollicine said:
1) to install apx driver (NVIDIA driver )
2) to run file .batch
i think this! you check now and write the result!
Click to expand...
Click to collapse
hey i got a problem, my pc doesnt detect my device as apx something, instead it detects as unknown usb device (invalid device descriptor) . (i've also reset my pc months ago ).
jackfiq said:
hey i got a problem, my pc doesnt detect my device as apx something, instead it detects as unknown usb device (invalid device descriptor) . (i've also reset my pc months ago ).
Click to expand...
Click to collapse
you install the driver for to use nvflash...read this guide to install the driver https://forum.xda-developers.com/showthread.php?t=1130574]
but to use file.batch 1th recovery_P75xx.bat of Recovery_P75xx_110710_RemoveUsbDriver.zip to run the nvflash and the recovery and you post the result. bye
I think your battery is complet down, that means the current is under the charging level.
bierma32 said:
I think your battery is complet down, that means the current is under the charging level.
Click to expand...
Click to collapse
Ooo okok ill try to charge it first then but right now im study away from my home so its gonna take a while but thank you soo much for helping me put
jackfiq said:
Ooo okok ill try to charge it first then but right now im study away from my home so its gonna take a while but thank you soo much for helping me put
Click to expand...
Click to collapse
Ok! you connect it with power supply for a night.... i hope you can to recharge it if you don't see the battery icon...otherwise you try with a usb cable cut directly on battery's connector and recharge it...you've to remove back cover. Update us, bye!
bollicine said:
Ok! you connect it with power supply for a night.... i hope you can to recharge it if you don't see the battery icon...otherwise you try with a usb cable cut directly on battery's connector and recharge it...you've to remove back cover. Update us, bye!
Click to expand...
Click to collapse
hello again. sorry for didnt post any update . im actually really busy with studies and i already told that my university is far from my home. so i didnt get a chance to get back here until a month. now im here exicted to the thing only then come out with this type of output
Recovery the bootloader...
Nvflash started
rcm version 0X4
Command send failed (usb write failed)
so i've made a little research.. so it seems that my device's bootloader is locked. so is there anyway to unlock my bootloader??
by the way im really sorry i didnt update for a long time. but i hope you still want to keep in touch with me to solve my problem. much thanks!
Good afternoon, I have a g4 MOTO plus replica MT6580, was connected to flash without flash tool, and the process was halted, and now the flashtool not recognized anymore the device, but the device is recognized by the usb when plugged.
Sorry my bad english.
Which flashtool were you using? Is your phone still working or is it bricked?
Augustoandro said:
Which flashtool were you using? Is your phone still working or is it bricked?
Click to expand...
Click to collapse
I was using Pack-Flashtool-v5.1640.00.000, already tried with 5.17 as well.
The phone does not turn on, does not appear to be charging.
Only the computer recognizes it, when I try to use the flashtool again presents me with a lot of errors, which I did not give before, it's just the red bar.
Try keeping the phone on until the battery drains out, I was stuck on a similar situation once.
---------- Post added at 11:21 AM ---------- Previous post was at 11:20 AM ----------
yurisalt said:
I was using Pack-Flashtool-v5.1640.00.000, already tried with 5.17 as well.
The phone does not turn on, does not appear to be charging.
Only the computer recognizes it, when I try to use the flashtool again presents me with a lot of errors, which I did not give before, it's just the red bar.
Click to expand...
Click to collapse
Try keeping the phone on until battery drains out, I was in a similar situation once.
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.
justinfinity09 said:
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.[/Q
Click to expand...
Click to collapse
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Brawler leon said:
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Click to expand...
Click to collapse
Thanks! Can you tell me how? I've been researching about this as well for a long time now. Any help is appreciated.
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
---------- Post added at 05:30 PM ---------- Previous post was at 05:22 PM ----------
Just keep replying if it works and within a week you'll get your phone fully functional.
Here I have uploaded the platform tools needs d to flash recovery
Brawler leon said:
Here I have uploaded the platform tools needs d to flash recovery
Click to expand...
Click to collapse
Thanks a lot, man. Where the hell have you been all my life? Lol.
So my phone doesn't boot. It doesn't even show the Lenovo logo on it. Just mere darkness. :'(
I am going to Hong Kong later this week (this is where I bought the phone) and I don't know, maybe have someone fix it.
PS. Can you please DM me the links or if it isn't a loss for you you may just reply it here.
Thanks in advance and more power. The world needs more people like you.
Sincerely,
Justin
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Brawler leon said:
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Click to expand...
Click to collapse
Hey man. Justin here, again.
You may reach me through "[email protected]".
It doesn't show anything. Though, the LED light illuminates when connected to a power source or laptop. I'm starting to think it's absolutely hopeless. But please do message me anyway.
Fondly,
Justin
I think you have hard bricked your phone but still let's try
Brawler leon said:
I think you have hard bricked your phone but still let's try
Click to expand...
Click to collapse
Sure. I will wait for you in my e-mail. Thanks!
Brawler leon said:
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
Tried removing battery, its still in bootloop.
Click to expand...
Click to collapse
I downloaded the new leaked pie version of android for the Galaxy s9+ and after realizing it was buggy, lacking some features i needed, i tried going back to oreo and messed up somewhere. I used odin do get oreo and that worked, then while starting back up, it said i had to factory reset it and after turning the phone back off, i keep getting stuck on the ss rdx screen where it asks to back up to sd card or computer and cant get off that no matter what i do. Ive tried backing up to sd card and nothing happens. Any help would be appreciated.
I had this same problem..... I'm on an s9+ on Xfinity service. I could boot the phone back up by pressing and holding a combo of power and volume down I believe but the phone would boot up and be locked up on the sign-on screen (it wouldn't pull up the keypad to let me enter the pin code). I also couldn't shut down the phone or boot it into download mode or into recovery. I ended up hooking it up to my computer via usb and sending an adb command to fastboot into download mode. Luckily that worked and I could then use Odin and reflash stock firmware. I already had developer mode and usb debugging mode enabled prior to the phone locking up on me.
---------- Post added at 01:21 PM ---------- Previous post was at 01:01 PM ----------
I also found this by digging through Google:
https://forum.xda-developers.com/galaxy-s8+/help/samsung-s8-sm-g955uzkatmb-boot-error-t3726832
Hope this helps.
Libdawg said:
I had this same problem..... I'm on an s9+ on Xfinity service. I could boot the phone back up by pressing and holding a combo of power and volume down I believe but the phone would boot up and be locked up on the sign-on screen (it wouldn't pull up the keypad to let me enter the pin code). I also couldn't shut down the phone or boot it into download mode or into recovery. I ended up hooking it up to my computer via usb and sending an adb command to fastboot into download mode. Luckily that worked and I could then use Odin and reflash stock firmware. I already had developer mode and usb debugging mode enabled prior to the phone locking up on me.
---------- Post added at 01:21 PM ---------- Previous post was at 01:01 PM ----------
I also found this by digging through Google:
https://forum.xda-developers.com/galaxy-s8+/help/samsung-s8-sm-g955uzkatmb-boot-error-t3726832
Hope this helps.
Click to expand...
Click to collapse
Samsung phones do not have "fastboot" mode. What you did is issue the adb command
adb reboot bootloader OR download OR recovery OR edl
If adb wasn't already pre-enabled then this would not have worked, however flashing a combination or eng boot would have enabled adb mode.
billa said:
Samsung phones do not have "fastboot" mode. What you did is issue the adb command
adb reboot bootloader OR download OR recovery OR edl
If adb wasn't already pre-enabled then this would not have worked, however flashing a combination or eng boot would have enabled adb mode.
Click to expand...
Click to collapse
Dude... Way to ressurect an old thread..
InsanePostman said:
Dude... Way to ressurect an old thread..
Click to expand...
Click to collapse
I replied to a message dated 10-04-2018 it's not from 1999 lol
thank you
billa said:
I replied to a message dated 10-04-2018 it's not from 1999 lol
Click to expand...
Click to collapse
and your reply is still relevant... even another year later. I'm in the same boat and was confused about the fastboot reference, but appreciate the info from everyone.
*side note*
"Way to ___" posts and comments rarely add any value and usually have the opposite effect intended... instead calling someone else out or pointing out a misconduct you end up looking like a condescending prick. And now I've got dirty hands as well and seem like a know it all for calling out this know it all. The high road is always a better path.
God bless relevant ressurectable threads. Unlike Pet Cemeteries... sometimes dead is NOT better : )
HT
HTidwell said:
and your reply is still relevant... even another year later. I'm in the same boat and was confused about the fastboot reference, but appreciate the info from everyone.
*side note*
"Way to ___" posts and comments rarely add any value and usually have the opposite effect intended... instead calling someone else out or pointing out a misconduct you end up looking like a condescending prick. And now I've got dirty hands as well and seem like a know it all for calling out this know it all. The high road is always a better path.
God bless relevant ressurectable threads. Unlike Pet Cemeteries... sometimes dead is NOT better : )
HT
Click to expand...
Click to collapse
I see, so anyone posting a relevant reply to a thread regardless if it's new or old, is now called a "know it all" by your name calling.
Interestingly I couldn't find in the xda rules anything that prohibits anyone from posting a reply if it's one year or older.
I'll just leave it at that, and let the moderators decide.
hey as per my username i'm no good at this but i got this far. so I got all the files together did sd _shadow's guide unlocked bootloader etc., RSA method doesn't work for me so i am trying the regular fastboot option but my phone cant do fastbootd also my CPU is QUALCOMM
so can i run the flashfile.bat via regular fastboot or will it brick my phone.
well forget it i hard bricked it living up to my name.hopefully ill get it fixed
purenoob said:
well forget it i hard bricked it living up to my name.hopefully ill get it fixed
Click to expand...
Click to collapse
bricked can mean several different things.
No sign of life?
Window PC?
sd_shadow said:
bricked can mean several different things.
No sign of life?
Window PC?
Click to expand...
Click to collapse
no sign of life, no power no charge, i'm on windows if plugged in its detected in the device manager.
can this be fixed by anyone i feel really bad, i know it's just a phone but ya know.
purenoob said:
if plugged in its detected in the device manager.
Click to expand...
Click to collapse
That is a sign of life
Is my device in EDL Mode?
sd_shadow said:
That is a sign of life
Is my device in EDL Mode?
Click to expand...
Click to collapse
in device manager it says quadcomm hs-usb qdloader 9008. so by the looks of this it's a candidate for EDL mode .
i don't want to mess up anymore i think ill give this to a technician. gonna be a while is it ok to let the battery die.
came across a blank flash my phone is RETLA but the flash is RETBR does it matter ?
purenoob said:
came across a blank flash my phone is RETLA but the flash is RETBR does it matter ?
Click to expand...
Click to collapse
If the bootloader is unlocked it should be fine.
Don’t worry about the battery, edl is very low power, battery can last weeks, and should still support charging
sd_shadow said:
If the bootloader is unlocked it should be fine.
Don’t worry about the battery, edl is very low power, battery can last weeks, and should still support charging
Click to expand...
Click to collapse
bootloader was unlocked before all of this happened, so does this mean i can use a android 10 back flash or use an android 11 one for avoid trouble again.
sd_shadow said:
If the bootloader is unlocked it should be fine.
Don’t worry about the battery, edl is very low power, battery can last weeks, and should still support charging
Click to expand...
Click to collapse
ok so now i'm getting this error.
Opening device: \\.\COM5 [ 0.002] Detecting device [ 34.509] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error [ 34.510] Check qboot_log.txt for more details [ 34.511] Total time: 34.514s FAILED: qb_flash_singleimage()->sahara_greet_device()->change_mode()->do_hello()->IO error
YES!! finally i got it into flashboot mode i just had to hold the pwr button 10 sec and tried blackflash again.
now im gonna dl RSA to get the correct stuff for my phone.
Might be to early to say but Thank you so much for the help!. ill post back later to update you.
update: success on flash still on a11 dont care its working again money saved.
i Wanted to downgrade becuase since this update my YouTube at higher resolutions would stutter and some of my main games started to chug in certain places.
phone lil hotter etc you know the woes oh well its working now thanks a million thanks again.
purenoob said:
YES!! finally i got it into flashboot mode i just had to hold the pwr button 10 sec and tried blackflash again.
now im gonna dl RSA to get the correct stuff for my phone.
Might be to early to say but Thank you so much for the help!. ill post back later to update you.
update: success on flash still on a11 dont care its working again money saved.
i Wanted to downgrade becuase since this update my YouTube at higher resolutions would stutter and some of my main games started to chug in certain places.
phone lil hotter etc you know the woes oh well its working now thanks a million thanks again.
Click to expand...
Click to collapse
Hey just reporting back i thought i could bear with android 11 but i just couldn't. Being really really carefull this time i managed to return to android 10.
Using the fastbootd method before i ignored it and flashed in regular fastboot. So this time i followed every step to a tee.
just wanted you too know and as all always thx sd_shadow.