Related
hey there!
i guess i found the solution for my problem on this forum but i cant find the topic anymore. i just wanted say "thank you" to the unknown author,
and post the solution again, so maybe some more people can find it since it was just coicidence for me..
okay my samsug galaxy ace s8530 has been bricked when some flashing went wrong. afterwards there was no reaction anymore. i was pretty shure ther was no way but doing this.
unfotunetly i found a post without any answers where someone told the following:
1: take out your battery
2: connect your mobile to your pc using the usb data cable
3: keep pressed these three buttons: Vol- , Menu, Power
4: still keep them pressed and put back your battery to the phone. this is not too easy but actually its possible
5: the mobile will go to download mode, flash with odin.
my battery was nearly completly charged when i did this, and
it worked for me! thanks again to the guy who found out!
btw it is also possible to get to the arm9 mode this way. i just couldnt figure out what it was good for.
I will give it a try tomorrow on my s5570 that i just bought/bricked lol
unfortunately it didnt work for me, would creating a usb test jigs help in my case (my phone cant even power on), and does it charge if I connect it to the power cord?
snoer said:
hey there!
i guess i found the solution for my problem on this forum but i cant find the topic anymore. i just wanted say "thank you" to the unknown author,
and post the solution again, so maybe some more people can find it since it was just coicidence for me..
okay my samsug galaxy ace s8530 has been bricked when some flashing went wrong. afterwards there was no reaction anymore. i was pretty shure ther was no way but doing this.
unfotunetly i found a post without any answers where someone told the following:
1: take out your battery
2: connect your mobile to your pc using the usb data cable
3: keep pressed these three buttons: Vol- , Menu, Power
4: still keep them pressed and put back your battery to the phone. this is not too easy but actually its possible
5: the mobile will go to download mode, flash with odin.
my battery was nearly completly charged when i did this, and
it worked for me! thanks again to the guy who found out!
btw it is also possible to get to the arm9 mode this way. i just couldnt figure out what it was good for.
Click to expand...
Click to collapse
Hi, i think you are talking about my post here it is.
http://forum.xda-developers.com/showthread.php?p=13643975#post13643975
Not working for mine too...Service center too far from my place...does jig working???
Guys,
i was using the ClockWork mod rom manager
i was trying to backup the current gingerbread 2.3.4 rom
n den suddenly the phone switched off
now its not turning on
i tried pressin the
VOL DOWN + HOME+ POWER KEY
inorder to go to download mode n re-flash it but
nothing appears on the screen
the phone is not responding at all
my cell was rooted
plz someone help me.......plzzz
im stuck!!!
Thank...
...you and specially SuperMini...
racerronny said:
guys,
i was using the clockwork mod rom manager
i was trying to backup the current gingerbread 2.3.4 rom
n den suddenly the phone switched off
now its not turning on
i tried pressin the
vol down + home+ power key
inorder to go to download mode n re-flash it but
nothing appears on the screen
the phone is not responding at all
my cell was rooted
plz someone help me.......plzzz
im stuck!!!
Click to expand...
Click to collapse
better never use cwm on your ace!! Or your ace's motherboard will dead..seriously, my ace now at samsung care center..hopefully she not dead yet..
---------- Post added at 04:34 PM ---------- Previous post was at 04:30 PM ----------
better never use cwm on your ace!! Or your ace's motherboard will dead..seriously, my ace now at samsung care center..hopefully she not dead yet..
SuperMini said:
Hi, i think you are talking about my post here it is.
http://forum.xda-developers.com/showthread.php?p=13643975#post13643975
Click to expand...
Click to collapse
No it's not the same!!!
With your method, you didn't mention to keep pressing the 3 buttons while putting back the battery. In his, there is this instruction.
With yours it didn't show "Downloading".
Geeky Dicky said:
better never use cwm on your ace!! Or your ace's motherboard will dead..seriously, my ace now at samsung care center..hopefully she not dead yet..
---------- Post added at 04:34 PM ---------- Previous post was at 04:30 PM ----------
better never use cwm on your ace!! Or your ace's motherboard will dead..seriously, my ace now at samsung care center..hopefully she not dead yet..
Click to expand...
Click to collapse
what ur talking about? we have been using cwm 4.0.0.9 for months now. head to galaxy ace forum and read cwm recovery thread, look on its posting date seriously maybe ur problem because ur installing cwm directly from rom manager.
an0nym0us_ said:
what ur talking about? we have been using cwm 4.0.0.9 for months now. head to galaxy ace forum and read cwm recovery thread, look on its posting date seriously maybe ur problem because ur installing cwm directly from rom manager.
Click to expand...
Click to collapse
same case..
My ace is also dead aftr usig ROM MANAGER
i hate rom manager,
@geeky.
Did u get ur ace fixed undr warranty?
Hw lng it takes? Plz reply...
an0nym0us_ said:
what ur talking about? we have been using cwm 4.0.0.9 for months now. head to galaxy ace forum and read cwm recovery thread, look on its posting date seriously maybe ur problem because ur installing cwm directly from rom manager.
Click to expand...
Click to collapse
yeah me too used CWM recovery on ace but not through ROM Manager as its not enlisted in devices.. but there is flashable zip which works
but now i use CF-Root kernel which installes CWM and Recovery , root ,ext4 by default
Thank you
Thank you!!! Works perfect.
brick my ACE just once when using ODIN. i accidentally disconnect the usb while flashing stock firmware using ODIN. but its just that.this should never happens if u follow the guide post by OP in every mod/rom/patch thread. how did u guys brick ur devices? i want to learn something from u guys.
edit: sorry OP for off thread
Thank you! worked like a charm =)
Thanks for this tip! It saved my wife's phone and by extension: me!
yes im trying to revive my friends bricked ace...the method is correct..but if u dont see the "download mode" just try connect to pc/lappy open ODIN n see..if its detcet the ace..i think that should be fine to flash...
correct me if im wrong...lol
Update android
Personnel to needing help with my samsung galaxy ace gt-s5830b
I was trying to install a newer version of android it was installed and reset
after reset and erased it does not turn over at all ..
if staying pressing volume up + home + power it recognizes the computer by Keis etc. ..
only that I can not do anything ... nor can recover odin ..
anyone been through this problem?
or someone knows how to do it on again?
Thank you for now
Help need for bricked ace S5830
Good day to all!
I am trying to help out a colleague who 'probably' has bricked his Ace S5830
He says he was attempting to flash stock 2.3.6 and this happened.
He has been rooted and using CM previously.
Can anyone please advise what this screen/logo means?
It can go to Download mode but not recovery mode.
I can obtain more details if required.
Thanks and cheers to all.
My phone only enter to the download mode, but i can`t flash it, because i have half-bricked USB port. It`s only charges after connecting to PC: "USB Device not recognized" and in the device manager: "Unknown Device" "A request for the USB device descriptor failed.". Any solutions?
Hi there
I have a problem with my Samsung s2.
I have installed kies nor any other software on my pc to sync my phone to it. i don't even know how kies works...
I was going through the phone and under system i saw the update option...i updated the phone and the firmware too...after about 3-4 installations and reboots the phone got stuck on the start up screen...i tried hard reboot by holding the power+volume up+menu/OK keys - Nothing happened
then i deleted all my files from the sd card but that dint help either. Then i saw a video on youtube about clockworkmod... i followed that and after doing so the phone now goes to start up screen with a yellow triangle. when i try installing the ROM from odin it fails. Since then i got an icon showing that there is an error on the connectivity between the phone and the computer...i ran the clockworkmod again using odin and the phone returned to start up screen with a yellow triangle. The phone only goes to download mode but doesn't go to recovery/clockworkmod anymore (power+volume up+menu/OK buttons).
Another weird thing is that the phone doesn't turn off, as in if i press the power button for about 5 seconds the screen goes off but turn back on again...so if i have to reboot the phone i have to completely remove the battery n put it back in. when connected to the computer i don't see any storage drives on my computer only Odin detects the phone.
Please help me...
Thanks
Abbas
first try if you dont have a jig, remove battery and put back then Vol-down+Home+power...once you get download mod
Try a stock GB version on the ODIN from the link of All stock roms in my signature
make sure KIES is not running...and connected your phone directly to your PC motherbord USB socket, not through any hub or front USB socket...
better you give a full description of your problem like "soft bricked" instead of just "Q" on the heading, so that other can see at a glance...
Hi Zaheed,
Sorry about the heading...i actually accidentally posted this thread without the heading and now i cant see where i can edit it.
I will try what you have suggested and will revert to you.
Thanks
Abbas
zaheedahmed said:
first try if you dont have a jig, remove battery and put back then Vol-down+Home+power...once you get download mod
Try a stock GB version on the ODIN from the link of All stock roms in my signature
make sure KIES is not running...and connected your phone directly to your PC motherbord USB socket, not through any hub or front USB socket...
better you give a full description of your problem like "soft bricked" instead of just "Q" on the heading, so that other can see at a glance...
Click to expand...
Click to collapse
Hey Zaheed,
I tried to get the stock GB from the link on your signature but the file was now available to download. i might be trying to download a wrong file?? to be honest, i am very new to all this and dont know most of the things. Is it possible fr you to guide me in the simplest way possible. I will be very thankful.
Regards
Abbas
psychotico said:
Hey Zaheed,
I tried to get the stock GB from the link on your signature but the file was now available to download. i might be trying to download a wrong file?? to be honest, i am very new to all this and dont know most of the things. Is it possible fr you to guide me in the simplest way possible. I will be very thankful.
Regards
Abbas
Click to expand...
Click to collapse
you can download it from here http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#regiona
latest GB is XWLA4
Make sure your phone is I9100, not I9100G / I9100T or any other
---------- Post added at 01:14 PM ---------- Previous post was at 01:06 PM ----------
this one is working: http://skywanker.net/download/downl...9100_DBT_I9100XWLA4_I9100XXKI4_I9100DBTKH1.7z
just download and unzip, then you wil get a single file, which to be selected from PDA of ODIN...thats it
feel free to ask more....
Hi once again,
i have just checked and found out that my phone's model is I9100G and not I9100. is this a problem or would i need to download another software for that?
Abbas
psychotico said:
Hi once again,
i have just checked and found out that my phone's model is I9100G and not I9100. is this a problem or would i need to download another software for that?
Abbas
Click to expand...
Click to collapse
Oh.... not the link i sent for I9100G....
---------- Post added at 04:10 PM ---------- Previous post was at 04:07 PM ----------
I will give another link but sametime you search for I9100G issues too,
and visit this olso : http://forum.xda-developers.com/forumdisplay.php?f=1550
Thank you for all the help.
I found this site below:
sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=1#modelsa
do you think this is the site with the correct GB for I9100G
Abbas
zaheedahmed said:
Oh.... not the link i sent for I9100G....
---------- Post added at 04:10 PM ---------- Previous post was at 04:07 PM ----------
I will give another link but sametime you search for I9100G issues too,
and visit this olso : http://forum.xda-developers.com/forumdisplay.php?f=1550
Click to expand...
Click to collapse
this is the I9100G firmware available at SAMMOBILE.COM
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=1#modelsa
download one and flash through ODIN.
then you search the rooting method...
Goodluck
wassalam
ZACQ8 said:
this is the I9100G firmware available at SAMMOBILE.COM
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=1#modelsa
download one and flash through ODIN.
then you search the rooting method...
Goodluck
wassalam
Click to expand...
Click to collapse
ASAK,
I downloaded one of the flash for I9100G and installed it using ODIN but the phone is still in the same state as earlier...nothing has changed really.
Any advice on this?
Thanks
KH
your flashing on the ODIN was finished with "PASSED" ???
after flashing stil PC!PHONE icon??
ZACQ8 said:
your flashing on the ODIN was finished with "PASSED" ???
after flashing stil PC!PHONE icon??
Click to expand...
Click to collapse
Yes, the flashing finished with PASSED.
The PC!PHONE icon is gone.
psychotico said:
Yes, the flashing finished with PASSED.
The PC!PHONE icon is gone.
Click to expand...
Click to collapse
hi psychotico,
have you suceeded bringing up ur phone
? if you've solved, could you please write down the step by step? as my s2 couldn't get into download mode nor recovery mode, it just show a picture of phone---/!\---pc, anyway the odin still can detect my phone. i see some others are experienced this problem too but haven't get clear solving yet. many thanks if there is any master here can help
droid_me said:
hi psychotico,
have you suceeded bringing up ur phone
? if you've solved, could you please write down the step by step? as my s2 couldn't get into download mode nor recovery mode, it just show a picture of phone---/!\---pc, anyway the odin still can detect my phone. i see some others are experienced this problem too but haven't get clear solving yet. many thanks if there is any master here can help
Click to expand...
Click to collapse
jsut see the other thread you posted the same and answer please?
droid_me said:
hi psychotico,
have you suceeded bringing up ur phone
? if you've solved, could you please write down the step by step? as my s2 couldn't get into download mode nor recovery mode, it just show a picture of phone---/!\---pc, anyway the odin still can detect my phone. i see some others are experienced this problem too but haven't get clear solving yet. many thanks if there is any master here can help
Click to expand...
Click to collapse
No mate, no luck at all....please help me if you have found a solution.
Thanks
psychotico said:
No mate, no luck at all....please help me if you have found a solution.
Thanks
Click to expand...
Click to collapse
wish me luck then
i'm getting help from zacq8, please see http://forum.xda-developers.com/showthread.php?p=25288319#post25288319
This phone is a 1:1 replica of the Samsung Galaxy S4, it has Air gestures,Air View, Smart Stay.
The phone has the same specifications to the HDC Galaxy S4 Legend, the only difference is that Legend has 2 sensors whereas Spark has only one (it cant understand if the air motion is coming from left or right) also Legend has OGS, whereas Spark dosent.
Other than that they are basicly the same phone, I couldnt find any thread about this phone, nor could i find any custom ROM's.
I dont want to risk bricking it by trying to flash it with a Legend ROM, so I came here for help.
Has anyone had any success flashing it?
I will flash my Spark as soon as it arrives
I'll try Legend Rom and No.1 S6 Rom
Fusquinha77 said:
I will flash my Spark as soon as it arrives
I'll try Legend Rom and No.1 S6 Rom
Click to expand...
Click to collapse
Alright, please post here on how it went.
Tried to flash -fluffy- ROM, got a soft brick
I tried No.1 S6 rom and it did not boot. The LED blinks blue and the display turns on, but no logo... And after a while the phone turns off
Fortunately, I made a backup and restaured my phone successfuly
Actualy there is a rom for hdc galaxy spark on needrom.
but i've got no luck using that rom. Everything works fine except i can't make a phone call,texting, or connect to the internet, but maybe that rom works for you guys, you can give it a try
Sent from my GT-I9500 using xda app-developers app
Follow this topic: http://forum.xda-developers.com/showthread.php?t=2402860
Lindsay02 said:
Follow this topic: http://forum.xda-developers.com/showthread.php?t=2402860
Click to expand...
Click to collapse
Ok, but be careful. Backup your ROM first.
-fluffy- Legend ROM did not work on my HDC Galaxy S4 SPARK (blank screen)
hdc spark drivers
Fusquinha77 said:
I tried No.1 S6 rom and it did not boot. The LED blinks blue and the display turns on, but no logo... And after a while the phone turns off
Fortunately, I made a backup and restaured my phone successfuly
Click to expand...
Click to collapse
What drivers are you using to flash the spark. I have one and cannot get any drivers to work with the sp flasher.
drivers1492 said:
What drivers are you using to flash the spark. I have one and cannot get any drivers to work with the sp flasher.
Click to expand...
Click to collapse
http://www.mediafire.com/download/3v9bo6x9i8irlmy/MTK_drivers.7z
For your information: SPFlash Tools only works this way:
1) Turn the phone off
2) Take the battery out
3) Open SPFlashTools as administrator (right click -> run as administrator)
4) Click on "Scatter-Loading" and choose the Scatter File
5) Click on "Firmware -> Upgrade"
6) ONLY THEN, connect the phone, WITHOUT THE BATTERY, on the USB
7) Insert the battery
8) SPFlash Tools should start the upgrade process
YOU HAVE TO FOLLOW THESE STEPS, NECESSARILY IN THIS ORDER, otherwise, it will not work, ok?
Fusquinha77 said:
http://www.mediafire.com/download/3v9bo6x9i8irlmy/MTK_drivers.7z
For your information: SPFlash Tools only works this way:
1) Turn the phone off
2) Take the battery out
3) Open SPFlashTools as administrator (right click -> run as administrator)
4) Click on "Scatter-Loading" and choose the Scatter File
5) Click on "Firmware -> Upgrade"
6) ONLY THEN, connect the phone, WITHOUT THE BATTERY, on the USB
7) Insert the battery
8) SPFlash Tools should start the upgrade process
YOU HAVE TO FOLLOW THESE STEPS, NECESSARILY IN THIS ORDER, otherwise, it will not work, ok?
Click to expand...
Click to collapse
Thanks for the clarification I will give this a shot.
---------- Post added at 09:12 PM ---------- Previous post was at 09:01 PM ----------
after installing the drivers and following your directions all I get is unknown device when I put the battery in. Any ideas there?
Reboot your pc
Edit: OFF-Topic - Follow this thread - it´s interesting for us - http://forum.xda-developers.com/showthread.php?t=2434101
thanks
Fusquinha77 said:
Reboot your pc
Click to expand...
Click to collapse
Thanks I swapped out ports and cables and got it to flash. None of the air features work sadly. I used the s4 spark from needrom. I did make a backup of the original so i can reload it back. When I did a factory reset on this phone it wiped the imei. There wasn't a sticker under the battery or anything in the box. FCT tells me they dont keep a record of the imei of the phones they sell so I'm screwed. Not sure what to do since in all my reading I have come to the conclusion that without a backup of the efs its gone. pisses me off its a sweet little phone for the price I paid.
drivers1492 said:
Thanks I swapped out ports and cables and got it to flash. None of the air features work sadly. I used the s4 spark from needrom. I did make a backup of the original so i can reload it back. When I did a factory reset on this phone it wiped the imei. There wasn't a sticker under the battery or anything in the box. FCT tells me they dont keep a record of the imei of the phones they sell so I'm screwed. Not sure what to do since in all my reading I have come to the conclusion that without a backup of the efs its gone. pisses me off its a sweet little phone for the price I paid.
Click to expand...
Click to collapse
Buy an old samsung phone at e-bay and use its IMEI...
For some reason Spark gets no love here. I am folowing a thread on a russian forum, a guy is working on a Rom right now. Il post if it comes out and if I flash it.
If you get a link for that rom just send it to me I will flash it and post results. Cant use the phone anyway currently so I'm not worried about bricking it since I have an s4 active as my primary.
Nickrus21 said:
For some reason Spark gets no love here. I am folowing a thread on a russian forum, a guy is working on a Rom right now. Il post if it comes out and if I flash it.
Click to expand...
Click to collapse
Please give us this forum's link
Fusquinha77 said:
Please give us this forum's link
Click to expand...
Click to collapse
I dont think I am allowed to post other forum links here. There is no ROM there yet anyway.
Nickrus21 said:
I dont think I am allowed to post other forum links here. There is no ROM there yet anyway.
Click to expand...
Click to collapse
Send me by PM if you don't mind
spark or not?
hello
i have clone phone like s4 and i dont know if this is a spark can you help me please
thank you.
screenshots
Hi
could someone please send me stock rom for Alcatel pop 4, My phone is stuck on Alcatel logo after installing a theme and i have tried everything but i can't find a rom anywhere on internet.
Thank You
I have the same problem and I can´t find any.
GolpeadorMágico said:
I have the same problem and I can´t find any.
Click to expand...
Click to collapse
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
JordieSnipezHD said:
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
Click to expand...
Click to collapse
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
GolpeadorMágico said:
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
Click to expand...
Click to collapse
I could upload twrp backup if help
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Please, I´m going to try anything for recover it.
GolpeadorMágico said:
Please, I´m going to try anything for recover it.
Click to expand...
Click to collapse
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
Click to expand...
Click to collapse
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
Click to expand...
Click to collapse
I will never buy another there's no development or ROMs nothing I have installed exposed and root
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
I will never buy another there's no development or ROMs nothing I have installed exposed and root
Click to expand...
Click to collapse
Yeah, this mobile sucks. My mom lend me it and its horrible. I lost the system (you know) and the mobile update (Alcatel) don´t do any. I put it, the mobile sometimes its not recognized... No more. Alcatel, not again.
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
zbaracki said:
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
Click to expand...
Click to collapse
Can u get into twrp recovery
mygadgetgeek.com said:
Can u get into twrp recovery
Click to expand...
Click to collapse
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
zbaracki said:
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
Click to expand...
Click to collapse
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Cryonics said:
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Click to expand...
Click to collapse
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
zbaracki said:
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
Click to expand...
Click to collapse
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
bulletbeef said:
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
Click to expand...
Click to collapse
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
zbaracki said:
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
Click to expand...
Click to collapse
i had the same issue searched everywhere and nobody gave good drivers or complete answers not even alcatel themselves, so i figured it out, that's what this community is for
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
Click to expand...
Click to collapse
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
I succesefuly installed the stock rom witout mobile upgrade mobil
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
Click to expand...
Click to collapse
I had the same issue i was unable to install the stock rom using mobile upgrade it will say this is the last firmware there is no new update so i searched the web and i found a solution finaly its callad a software named sugar
what you need is a usb cable a good internet conection and drivers installed
make sure to follow instruction of the software to download
you will find the all instructions on this russian thread https://4pda.ru/forum/index.php?showtopic=675134&st=440#entry46026273
if you need any help just send me a pm
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Removed:
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Can you upload your twrp backup, or at least your stock recovery pleeease? I really need it since this is my work phone and it should be as stock as it came when they check it.
Hello,
I think i bricked my phone.
I unlocked the bootloader with ADB and then was trying to flash CWM for rooting the device, and after ADB told me that it was flashed succesfully, i rebooted my phone and now is stuck on Archos logo. Bootloop, the phone is detected by my pc, because you can hear the sound when u pin the usb, but i don't have access to it. Windows says there's a problem with this device and can't recognize it.
However, now it's not even bootloop anymore, the phonte screen just turned black, no more bootloop, no more vibration, no more nothing. The only thing is this windows sound when plug in the phone.
Actually, i try to fix it with SP Flashtool, but i'll be thankful if anyone helps.
Have a nice day.
#Edit: Archos 55 Helium
lengockhanhhai said:
Me too.help plz
Click to expand...
Click to collapse
??
up
up
help pleas, it's really important
UP
Did you try leaving the phone on until the battery drains out? Worked for me once.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
If it doesn't work, try flashing the stock recovery for your phone using adb. I hope you took a backup of it, but if not, begin searching the web for it.
Does your phone has a forum of its own on XDA?
If yes, you may ask there for the stock recovery.
Augustoandro said:
Did you try leaving the phone on until the battery drains out? Worked for me once.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
If it doesn't work, try flashing the stock recovery for your phone using adb. I hope you took a backup of it, but if not, begin searching the web for it.
Does your phone has a forum of its own on XDA?
If yes, you may ask there for the stock recovery.
Click to expand...
Click to collapse
Hey and thank's for your reply,
The battery is already drained out, but nothings changed.
Also, how can i flash a stock recovery if adb and fastboot doesn not even recognize my phone right now? I have a recovery and stock rom, but no utility to flasht them.
SP Flashtool started to do the job, but failed after with some errors messages :/
Also it doesn not have a XDA forum, it's a not-known yet brand.