I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Thanks for quick reply
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
headlessNick said:
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
Click to expand...
Click to collapse
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
shaijuvjohn said:
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
Click to expand...
Click to collapse
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
headlessNick said:
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Click to expand...
Click to collapse
Try YGDP and flash stock and then restore the backup if available.
When you flash the stock rom it will repalce the twrp also. We can easily install twrp through ygdp. Follow the steps.
1. Select your .cpb file and apply
2. YGDP will unzip the cpb file, path may be C:\YLXZGJ\YGDP\DownFiles\8297W (in my system this is the path, please check after unzipping)
3. Check the unzipped folder contents
4. There will be a file named recovery.img
5. Delete the recovery.img file
6. Copy your twrp recovery to the unzipped folder and rename it to recovery.img
7. Click on start button
8. Remove battery from your phone and connect it to the usb
9. It will detect your phone and start flashing
10. Wait for flashing finishes to 100 %
11. Done. Disconnect phone. You flashed stock rom with twrp recovery
12. Copy the backup to memory card and insert it in phone
12. Insert battery and press power button and volume up key, go to twrp recovery, restore your backup and enjoy
---------- Post added at 12:00 PM ---------- Previous post was at 11:56 AM ----------
headlessNick said:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
Click to expand...
Click to collapse
http://www.needrom.com/wp-content/uploads/2014/10/YGDP_Setup_V3.83_Assembly.zip
Try this one, i am using this one on A311.
You need to have these drivers installed in your system - DA USB VCOM Port, PreLoader USB VCOM (Android)
If you have drivers not installed use the below one from the attachment. :victory:
Thanks - Tying...
headlessNick said:
Thanks - Tying...
Click to expand...
Click to collapse
Thanks a lot guys especially
shaijuvjohn said:
shaijuvjohn
Click to expand...
Click to collapse
, I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
headlessNick said:
Thanks a lot guys especially , I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
Click to expand...
Click to collapse
Yup because i already went through all these situations and i know the difficulties. That is why i gave you each steps. Always Happy to HELP. :victory:
didnt worked
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
I hv tried to installed from ygdp stock rom but it stopped in between. The process wont complete, plz help me if u can
Micromax q391
My Micromax canvas q391 not working its just stuck on the Micromax logo n I'm not even able to access the recovery mode n does not have the backup of rom
What can I do to start it up please help
Even I tried to Flash with YGDP but no use. My mobile is not stable suddenly and automatically it disconnects from my system even connected with USB Cable.
..
WHen I open the link a page comes up saying " Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
"
What should I do....
same problrm faced
headlessNick said:
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Click to expand...
Click to collapse
i had faced same problem ..
but stay calm .. just download ypdp flash tool .. download stock rom and flash it using ypdp tool ... remember while flashing remove the battery otherwise it will not detect the phone , as my was not detected .. but as soon i removed the battery , it flashed the rom in couple of minutes . and after flashing remember to flash a custom rom as the stock rom gets corrupted causing these issues .. installed darkeness redefined rom and it is woking extremely fast , best rom in my opinion . choise is upon you ,
Hope my message helped you , for any more questions do ask.
boot loop
i have the same problem boot loop but im not able to flash becoz my micromax canvas nitro a311 disconnecting continuously on lap im not able to open recovery mode also help:fingers-crossed:
Related
Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
Please help!
christiano9911 said:
Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
Please help!
Click to expand...
Click to collapse
Try fix permission, you can user ROM manager or titanium back up, if that doesn't work then reflash the entire Rom.
eagledipesh said:
Try fix permission, you can user ROM manager or titanium back up, if that doesn't work then reflash the entire Rom.
Click to expand...
Click to collapse
The same thing happened to me just now. Struck in boot logo.
I have already installed CWM recovery so when i tried restoring it says m5 sum error.
What do i do?
G.Ashwinkumar said:
The same thing happened to me just now. Struck in boot logo.
I have already installed CWM recovery so when i tried restoring it says m5 sum error.
What do i do?
Click to expand...
Click to collapse
I assume that the backup was taken earlier using CWM recovery and now you are trying to restore the same, try complete wipe and then restore, if it doesn't work then re install a fresh ROM.
eagledipesh said:
I assume that the backup was taken earlier using CWM recovery and now you are trying to restore the same, try complete wipe and then restore, if it doesn't work then re install a fresh ROM.
Click to expand...
Click to collapse
Yes i took it earlier and now trying to restore.i have already tried factory reset but still it doesnt boot. What do i do?
---------- Post added at 11:51 AM ---------- Previous post was at 11:49 AM ----------
G.Ashwinkumar said:
Yes i took it earlier and now trying to restore.i have already tried factory reset but still it doesnt boot. What do i do?
Click to expand...
Click to collapse
Will installing a fresh rom end my problem?
eagledipesh said:
Try fix permission, you can user ROM manager or titanium back up, if that doesn't work then reflash the entire Rom.
Click to expand...
Click to collapse
tried fix permission but nothing happenned.
where do i get the official rom?
G.Ashwinkumar said:
Yes i took it earlier and now trying to restore.i have already tried factory reset but still it doesnt boot. What do i do?
---------- Post added at 11:51 AM ---------- Previous post was at 11:49 AM ----------
Will installing a fresh rom end my problem?
Click to expand...
Click to collapse
Yes it should solve the issue, try flashing the tool VIA SP Flash Tool. here is the link to download stock rom provided by Micromax
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
You will lose all your data, try it at your own risk, i am not responsible if your phone bricks, if you are not comfortable go to the service station and get it flashed.
christiano9911 said:
tried fix permission but nothing happenned.
where do i get the official rom?
Click to expand...
Click to collapse
Check this link below, this is stock ROm without root.
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
Instructions : http://forum.xda-developers.com/showthread.php?t=2308431
For rooting you can follow this thread : http://forum.xda-developers.com/showthread.php?t=2292971
eagledipesh said:
Yes it should solve the issue, try flashing the tool VIA SP Flash Tool. here is the link to download stock rom provided by Micromax
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
You will lose all your data, try it at your own risk, i am not responsible if your phone bricks, if you are not comfortable go to the service station and get it flashed.
Check this link below, this is stock ROm without root.
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
Instructions : http://forum.xda-developers.com/showthread.php?t=2308431
For rooting you can follow this thread : http://forum.xda-developers.com/showthread.php?t=2292971
Click to expand...
Click to collapse
Flashed a cutom ROM through CWM now working fine.
G.Ashwinkumar said:
Flashed a cutom ROM through CWM now working fine.
Click to expand...
Click to collapse
Please press thanks if i have help you....
Micromax Canvas hd A116 is not getting started!
Helloo..
Please help me as I bought Micromax Canvas hd A116 3 months before and it was my worst experience with micromax, I wish I had purchase samsung.
Its just 3 months and my phone is not getting started.. tried to charge the phone but its not getting charge.. its completely switched off..
battery conditions is also so bad.. have to charge all the day.
Anyone can help me here??
My micromax a50 not booting up
i was trying to install a kernel which was for enabling swap facility in my micromax a50 whose link I got form this site onlly..... When i instaled it from zip using recovery and rebooted it didn;t boot....... plz help me......... can reinstalling the stock rom after downloading it from internet can solve the problem
ronakandro said:
i was trying to install a kernel which was for enabling swap facility in my micromax a50 whose link I got form this site onlly..... When i instaled it from zip using recovery and rebooted it didn;t boot....... plz help me......... can reinstalling the stock rom after downloading it from internet can solve the problem
Click to expand...
Click to collapse
Yup....re install ur stock ROM and u r good to go
I'm not responsible if u brick ur device.. Hit thanks
Use Sp flash tool method instead of clockmode recovey
You should use SP flash Tool method For flashing Stock Rom,it is very safe and Trusted.
Help from Canvas HD
I faced the same problem. My battery got swollen and is of no use. Now I have switched to ERD battery. Not bad . but is not too good , because its only 1250 mAh. But , should tell you, is working for its worth.
Alka10 said:
Helloo..
Please help me as I bought Micromax Canvas hd A116 3 months before and it was my worst experience with micromax, I wish I had purchase samsung.
Its just 3 months and my phone is not getting started.. tried to charge the phone but its not getting charge.. its completely switched off..
battery conditions is also so bad.. have to charge all the day.
Anyone can help me here??
Click to expand...
Click to collapse
Best available option take it to the service center, or try installing cwm recovery or your entire stock rom through Sp flashtools.
Brom error : S_da_sdmmc_write_failed
Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
After reading this Thread i tried reintalling fresh rom
I downloaded
1.Mobistel_Cynus_T1_Drivers_x86
2.SP_Flash_Tool_v3.1304.0.119 (latest)
3.MT6589_Android_scatter_emmc in the Sub folder (S9201_4.2_MP_F3F8_B1_IN_MMX_09_FLASHER_USER)
But i'm getting error in SP Flash tool:
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Please Help my phone is still not working and me alone at home not able to contact anyone.
Please help!
arungautam10 said:
Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
After reading this Thread i tried reintalling fresh rom
I downloaded
1.Mobistel_Cynus_T1_Drivers_x86
2.SP_Flash_Tool_v3.1304.0.119 (latest)
3.MT6589_Android_scatter_emmc in the Sub folder (S9201_4.2_MP_F3F8_B1_IN_MMX_09_FLASHER_USER)
But i'm getting error in SP Flash tool:
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Please Help my phone is still not working and me alone at home not able to contact anyone.
Please help!
Click to expand...
Click to collapse
Are you admin ??
that's because the version of ur SP tool old.Google ' latest sp tool ' and get the version which is lyk 'v1.1.13' or so... it! I'll work...
Sent from my Micromax A116 using xda app-developers app
Plz help some mmx hd can't start
Plz help me.... Am installed cwm recovery on it....nd trying to install macrocream rom (rom of canvas 2) then i reboot my phone and it switch off..nd not starting.... Recovery mode cannot support by power key and volum - key... Plz help...also not charging on switch off ...
If you have cwm just download from here and flash.... http://d-h.st/fXr
Sent from my Nexus 4 using XDA Premium 4 mobile app
hey guys! im in trouble, i flashed my micromax canvas hd with custom rom called "suvi rom" i did all steps perfectly it said installed succesfully, but when i reboot it nothing happens. it got bricked!
saqawat said:
hey guys! im in trouble, i flashed my micromax canvas hd with custom rom called "suvi rom" i did all steps perfectly it said installed succesfully, but when i reboot it nothing happens. it got bricked!
Click to expand...
Click to collapse
Can you pls tell me in brief may i can help you as i have faced similar issue but retrieved my mobile back fine working
I've not heard any case of bricking with A116 so far. Try to flash stock rom using SP tool. Make sure the battery is sufficiently charged.
sumit.gore21488 said:
Can you pls tell me in brief may i can help you as i have faced similar issue but retrieved my mobile back fine working
Click to expand...
Click to collapse
i first wiped data,partitions and dalvik cache after that went on to install from sd card. i placed the zip file in external sd card so i choose the location from where to retrieve. then its says installation started and it was in progress everything goes as it should be, after that it says rom installed enjoy! so, i click on go back and reboot it.. after that my fone is not switching on.. when i put on charge nothing happening, i removed the battery then again inserted still nothing happens
saqawat said:
i first wiped data,partitions and dalvik cache after that went on to install from sd card. i placed the zip file in external sd card so i choose the location from where to retrieve. then its says installation started and it was in progress everything goes as it should be, after that it says rom installed enjoy! so, i click on go back and reboot it.. after that my fone is not switching on.. when i put on charge nothing happening, i removed the battery then again inserted still nothing happens
Click to expand...
Click to collapse
Try this
1. check if you are able to get back to your recovery mode. If it goes cool then flash any other ROM made for canvas A116 HD only. If you dont have download it first and paste in your memory card. you can access your memory card from recovery mode from advance --> mount option. This can be done only if you are able to access your recovery mode by pressing volume up+down and Lock keys together. Keep pressing for more time till you go in recovery mode
2. If you are unable to go to recovery then simply flash the stock rom 4.2 via SP flash tool by removing battery (Pls search for SP Flash tool method in XDA Canvas HD section)
Pls revert if you are able to do any of these..
Press Thanks If I Helped You...........
First of all all the mtk devices are unbrickable u can flash the firmware from sp tools.goodluck if u find any problems ping me !
my canvas hd got hardbrick when flashed with suvirom....
prithvirao17 said:
I've not heard any case of bricking with A116 so far. Try to flash stock rom using SP tool. Make sure the battery is sufficiently charged.
Click to expand...
Click to collapse
actually by mistake i also disabled the flash recovry<cmv>and when tired to unbrick with original stock rom with sp flash tool....its giving me sp flash tool error 8200...the target inconsistent...my phones not charging ...not booting what to do????any help for me???
---------- Post added at 06:57 AM ---------- Previous post was at 06:51 AM ----------
Zafar7777 said:
First of all all the mtk devices are unbrickable u can flash the firmware from sp tools.goodluck if u find any problems ping me !
Click to expand...
Click to collapse
i got stuck because of worng <error> during flashing...and then using sp flash tool also..as my phones...not booting...nor charging...not even the dispalys blinks...nor charging light...totally dead...how to recover such phone...the sp flash tool is showing error 8200..target incosistent,no space...i think i erased the whole rom and thats why not able to flash from sp tool...help???
Solution
swapsz said:
actually by mistake i also disabled the flash recovry<cmv>and when tired to unbrick with original stock rom with sp flash tool....its giving me sp flash tool error 8200...the target inconsistent...my phones not charging ...not booting what to do????any help for me???
---------- Post added at 06:57 AM ---------- Previous post was at 06:51 AM ----------
i got stuck because of worng <error> during flashing...and then using sp flash tool also..as my phones...not booting...nor charging...not even the dispalys blinks...nor charging light...totally dead...how to recover such phone...the sp flash tool is showing error 8200..target incosistent,no space...i think i erased the whole rom and thats why not able to flash from sp tool...help???
Click to expand...
Click to collapse
Change your SP tool Software Version And google SP_Flash_Tool_v3.1304.0.119 Version and then Tell me after it Is any error Show or not
Give link to rom
Sent from my A116 using XDA Free mobile app
?
shivambajaj said:
Give link to rom
Sent from my A116 using XDA Free mobile app
Click to expand...
Click to collapse
Please Specify The Name Of the Rom ?
saqawat said:
hey guys! im in trouble, i flashed my micromax canvas hd with custom rom called "suvi rom" i did all steps perfectly it said installed succesfully, but when i reboot it nothing happens. it got bricked!
Click to expand...
Click to collapse
shivambajaj said:
Give link to rom
Sent from my A116 using XDA Free mobile app
Click to expand...
Click to collapse
Raj_Chandigarh said:
Please Specify The Name Of the Rom ?
Click to expand...
Click to collapse
Guys "Suvi ROM" is for A110 Canvas 2 not for A116 Canvas HD !! Now if u have flashed the wrong ROM.... Try to flash the '"correct'" Stock ROM of A116 via SP Flash Tools !!
Follow this post ..... http://forum.xda-developers.com/showthread.php?p=42269382
saqawat said:
hey guys! im in trouble, i flashed my micromax canvas hd with custom rom called "suvi rom" i did all steps perfectly it said installed succesfully, but when i reboot it nothing happens. it got bricked!
Click to expand...
Click to collapse
didnt you backup before flashing this ROM?
Hello! This is my first post
I am hoping that you guys can give me some pointers about resolving the issue with my phone, I searched around but I can't find anything
I can't boot into recovery mode after flashing ClockworkMod Recovery... It just restarts and boots normally if I try to enter into recovery... I used the instruction from this website to do it: (I am unable to post the link, so I am putting the text in the quote box)
How to install CWM Recovery
Here is what you need to do to flash a custom recovery image – more exactly CWM Recovery – on the smartphone.
First task for you to accomplish: find and then flash MobileUncle MTK Tool on the AQUA i5.
Launch it afterwards. Then be sure you do this: tap the option called Update Recovery and afterwards transfer recovery.img to the phone’s SD card root.
After you have patience for a couple of minutes (not more than five), the CWM Recovery tool will be flashed on the Intex AQUA i5.
If everything went well, your handset should reboot into the custom recovery image. Now your phone is both rooted and installed with ClockworkMod Recovery.
NOTE: In the eventuality of a problem, like for example the smartphone gets stuck in boot loop, you need to solve this by taking the battery out of the device, then inserting it back in and re-doing the tutorial from the first step to the very last one.
The I5 could also surprise you with this issue: getting stuck in “Welcome” screen. For this to go away, you will have to repeat the steps we gave you for the previous problem. All is well now.
Click to expand...
Click to collapse
Is there a way to fix this or should I flash my recovery again? Thanks in Advance, TD
TheDcoder said:
Hello! This is my first post
I am hoping that you guys can give me some pointers about resolving the issue with my phone, I searched around but I can't find anything
I can't boot into recovery mode after flashing ClockworkMod Recovery... It just restarts and boots normally if I try to enter into recovery... I used the instruction from this website to do it: (I am unable to post the link, so I am putting the text in the quote box)
Is there a way to fix this or should I flash my recovery again? Thanks in Advance, TD
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Unfortunally i couldn't find the device forum for your mentioned one so the better way to ask is to do it here >>> Android Q&A, Help & Troubleshooting
Oh, It would be nice if a mod or admin can move this thread over there
ROM manager app may help
if your phone is rooted, then try installing a recovery from app called ROM MANAGER, hope that would help
I already tried that, Its says that my device is not supported
What phone have you got? Full model number?
Intex Aqua i-5.... That is all I know
try this http://forum.xda-developers.com/showthread.php?t=2255657
Already tried, Can't get past step 7
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
Click to expand...
Click to collapse
I was confused whether to do it while the phone is switched off or on... I tried both for that reason but no luck
Also, I can't see the status bar change to "Searching too"
TheDcoder said:
Intex Aqua i-5.... That is all I know
Click to expand...
Click to collapse
i think you might have to reset your whole phone by installing stock firmware again,, this video i found from youtube. use your instinct to trust this video but its entirely your decision.
https://www.youtube.com/watch?v=_pYqKjOkihg
i wish i could help more.
Thanks
I will try to attempt it again... Will post the results here
Try Cwm rom manager, it will provide you with suitable recovery, otherwise try flashify, same function as Cwm rom manager but with extra recovery such as Cwm,twrp,pliz etc.
TheDcoder said:
Already tried, Can't get past step 7
I was confused whether to do it while the phone is switched off or on... I tried both for that reason but no luck
Also, I can't see the status bar change to "Searching too"
Click to expand...
Click to collapse
switched off... flash tools usually require the device to be off. Did you install the driver correctly?
Yes, I did install the drivers correctly... atleast I believe I did
Hello,
I am new to this website. need HELP
I rooted my lenovo p780 (S228_8GB) using KINGOROOT app.
Downloaded a recovery image from internet.
Downloaded ASUS Z5.zip from internet.
Replaced the ROM everything went right.
After installation, I saw Notification is in Russian language and also i see some spelling mistakes.
I thought to switch back to Kitkat 4.4.2 of p780 BUT could not
Problem after ROM flash:
cannot flash recovery image. (maybe not sure which one to use)
Wish to go back to kitkat 4.4.2 or any suggestions from the expert.
maarwadi said:
Hello,
I am new to this website. need HELP
I rooted my lenovo p780 (S228_8GB) using KINGOROOT app.
Downloaded a recovery image from internet.
Downloaded ASUS Z5.zip from internet.
Replaced the ROM everything went right.
After installation, I saw Notification is in Russian language and also i see some spelling mistakes.
I thought to switch back to Kitkat 4.4.2 of p780 BUT could not
Problem after ROM flash:
cannot flash recovery image. (maybe not sure which one to use)
Wish to go back to kitkat 4.4.2 or any suggestions from the expert.
Click to expand...
Click to collapse
Hi.
Look in Development area for your stock firmware.
Flash again with SPFlash Tool.
Go to q&a section/rooting tutorial for kitkat. There is a tutorial for installing TWRP safe.
After all this, safe backup your currently installed system. NOT OPTIONAL.
Now after full backup, ONLY AFTER FULL BACKUP you can install other custom firmware. I recommend you to install latest MIUI.
Hope this helps you.
Good luck.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi.
Look in Development area for your stock firmware.
Flash again with SPFlash Tool.
Go to q&a section/rooting tutorial for kitkat. There is a tutorial for installing TWRP safe.
After all this, safe backup your currently installed system. NOT OPTIONAL.
Now after full backup, ONLY AFTER FULL BACKUP you can install other custom firmware. I recommend you to install latest MIUI.
Hope this helps you.
Good luck.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Well thank you for your reply.
I was about to post some more details, like:
I was able to start recovery mode using p780 image.
some ROMs (i think OTA) tried to install. but it stuck with
warning: No file contexts
and after some time it would abort the installation with status 6.
However, this time i think i messed up
It is now stuck at "ASUS" logo on restart
cannot do factory reset mode also.
On top of that my phone doesnt connect to my laptop. (it cant detect )
I think its dead/brick. if you have further rescue suggestions , please do comment.
Thank you for your support.
Regards
maarwadi said:
Well thank you for your reply.
I was about to post some more details, like:
I was able to start recovery mode using p780 image.
some ROMs (i think OTA) tried to install. but it stuck with
warning: No file contexts
and after some time it would abort the installation with status 6.
However, this time i think i messed up
It is now stuck at "ASUS" logo on restart
cannot do factory reset mode also.
On top of that my phone doesnt connect to my laptop. (it cant detect )
I think its dead/brick. if you have further rescue suggestions , please do comment.
Thank you for your support.
Regards
Click to expand...
Click to collapse
hahahhahahha guys
I do not know how this happened but i got my lenovo s222 back... now updating using ota :laugh:
Your phone is possessed. He has an evil ghost in it, who is doing joke's on you. [emoji1]
Send from my Lenovo P1 Vibe Pro
maarwadi said:
Well thank you for your reply.
I was about to post some more details, like:
I was able to start recovery mode using p780 image.
some ROMs (i think OTA) tried to install. but it stuck with
warning: No file contexts
and after some time it would abort the installation with status 6.
However, this time i think i messed up
It is now stuck at "ASUS" logo on restart
cannot do factory reset mode also.
On top of that my phone doesnt connect to my laptop. (it cant detect )
I think its dead/brick. if you have further rescue suggestions , please do comment.
Thank you for your support.
Regards
Click to expand...
Click to collapse
stympy said:
Your phone is possessed. He has an evil ghost in it, who is doing joke's on you. [emoji1]
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
:crying::crying::crying::crying:
Seriously it seems possesses, the moment i posted this reply. It stopped working.
The S222 was happily loaded and i download OTA S226 from system update, but problem was with installation.
After restart it again stuck.:crying::crying::crying::crying:
maarwadi said:
:crying::crying::crying::crying:
Seriously it seems possesses, the moment i posted this reply. It stopped working.
The S222 was happily loaded and i download OTA S226 from system update, but problem was with installation.
After restart it again stuck.:crying::crying::crying::crying:
Click to expand...
Click to collapse
Now seriously... To be sure, you must reflash your stock firmware.
If after reflash the phone still have problems, then you have a hardware problem.
Send from my Lenovo P1 Vibe Pro
stympy said:
Now seriously... To be sure, you must reflash your stock firmware.
If after reflash the phone still have problems, then you have a hardware problem.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Ok let me start from the beginning:
I rooted my phone because of pokemon go. The phone was too slow and could not run this app effectively.
I rooted p780 using kingroot apk (the one with crown icon). removed unnecessary apps like (security, google play books etc...)
My phone was very happy :good::fingers-crossed::fingers-crossed::laugh: untill...
I wanted to explore more what i can do with root. I uninstalled contact manager (IdeaFriend) bbboooommmm.
Even with Contact+ i was not able to add any new contacts.
This made me to explore more about flash and roms.
I had S226 or S228 OTA and I found this Asus Zenfone 5 ROM.
During recovery i used Asus.....
After Asus installation I realized
No English Notification (Only Russian).
No Camera APP
No Necessary GAPPS...
So I tried to become Hero and wanted to reflash Lenovo. and .....rest you know.
Current condition: I have reflashed Asus. because i am not able to find/install the old lenovo rom or any other rom which can support.
But this is temorarily.
Hence i still need support:
I am able to reboot in recovery but need a proper ROM.
Regards
maarwadi said:
Ok let me start from the beginning:
I rooted my phone because of pokemon go. The phone was too slow and could not run this app effectively.
I rooted p780 using kingroot apk (the one with crown icon). removed unnecessary apps like (security, google play books etc...)
My phone was very happy :good::fingers-crossed::fingers-crossed::laugh: untill...
I wanted to explore more what i can do with root. I uninstalled contact manager (IdeaFriend) bbboooommmm.
Even with Contact+ i was not able to add any new contacts.
This made me to explore more about flash and roms.
I had S226 or S228 OTA and I found this Asus Zenfone 5 ROM.
During recovery i used Asus.....
After Asus installation I realized
No English Notification (Only Russian).
No Camera APP
No Necessary GAPPS...
So I tried to become Hero and wanted to reflash Lenovo. and .....rest you know.
Current condition: I have reflashed Asus. because i am not able to find/install the old lenovo rom or any other rom which can support.
But this is temorarily.
Hence i still need support:
I am able to reboot in recovery but need a proper ROM.
Regards
Click to expand...
Click to collapse
So... You have recovery, system is messed up,... Hmmm...
Look what i propose....
1. download the latest MIUI from Development/MIUI post
2. Put MIUI zip file on sd card any sdcard and insert it on the phone.
3. Reboot to recovery or start to recovery.
4. Go to wipe, advance wipe. Select all except sdcard and otg and swipe to wipe.
5. After wipe go to rebooy and press reboot to recovery
6. After reboot go to wipe and swipe to factory reset.
7. After wipe go to install, browse for MIUI and install.
8. After install is complete reboot to system.
9. Wait till all is completed, this reboot takes longer than usual... Do not be scared.
10. That must be it. Tell me if something goes wrong.
11. Good luck.
Send from my Lenovo P1 Vibe Pro
stympy said:
So... You have recovery, system is messed up,... Hmmm...
Look what i propose....
1. download the latest MIUI from Development/MIUI post
2. Put MIUI zip file on sd card any sdcard and insert it on the phone.
3. Reboot to recovery or start to recovery.
4. Go to wipe, advance wipe. Select all except sdcard and otg and swipe to wipe.
5. After wipe go to rebooy and press reboot to recovery
6. After reboot go to wipe and swipe to factory reset.
7. After wipe go to install, browse for MIUI and install.
8. After install is complete reboot to system.
9. Wait till all is completed, this reboot takes longer than usual... Do not be scared.
10. That must be it. Tell me if something goes wrong.
11. Good luck.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
OK I am ready to do it, any idea which version should i install ? M confused
maarwadi said:
OK I am ready to do it, any idea which version should i install ? M confused
Click to expand...
Click to collapse
OK Now I need your HELP....
I followed as you said (dont worry not blaming you )....
It just reboots and reboots .... with this reboot there is no logo or screen....it is just a blank screen with a vibration sound and off and then again same thing......
maarwadi said:
OK Now I need your HELP....
I followed as you said (dont worry not blaming you )....
It just reboots and reboots .... with this reboot there is no logo or screen....it is just a blank screen with a vibration sound and off and then again same thing......
Click to expand...
Click to collapse
Hi.
Dont worry. I am not offended.
Try to get in twrp now. With combination of keys pressed all: power key + volume - and volume +
Try to factory reset. See what is going on.
stympy said:
Hi.
Dont worry. I am not offended.
Try to get in twrp now. With combination of keys pressed all: power key + volume - and volume +
Try to factory reset. See what is going on.
Click to expand...
Click to collapse
Already tried that....not working...
always says an error of "unable to mount /emmc".
On looking into twrp I tried to format the internal storage but it says 0MB.
Also i see 'internal SD storage' as vfat format.
Any further suggestions ?
I have noticed that luckily my twrp is 1 version older. which has option to format the internal storage (if i understand correctly)
Maybe you can provide some codes to re-partition the internal storage. (this is what i learnt so far from other forums :crying
:crying::crying::crying:
Hi. To repartition the phone you must know some hexa.
I studied some tutorials here in XDA.
On our problem, seems to me that something happened to your hardware.
See if you can format the phone with sp flash tool v5.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. To repartition the phone you must know some hexa.
I studied some tutorials here in XDA.
On our problem, seems to me that something happened to your hardware.
See if you can format the phone with sp flash tool v5.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
My computer is not able to detect the phone. after connecting with cable i see a notification as 'usb not recognized'.
However, my External SD card can be read through phone.
So any other way to partition internal sd ?
maarwadi said:
My computer is not able to detect the phone. after connecting with cable i see a notification as 'usb not recognized'.
However, my External SD card can be read through phone.
So any other way to partition internal sd ?
Click to expand...
Click to collapse
If your computer does not detect your phone is a hardware problem.
That means you have a hardware fault on the phone motherboard. Seems to me that you have to go to an service store for further analysis.
Send from my Lenovo P1 Vibe Pro
Need some help! I woke up with my phone in bootloop (only Samsung logo). It is a MTK6589 device with Samsung S5 ROM specifically designed for this device. It is a rooted device with CWM recovery in it. I have been flashing ROMs for quite a long time. I flashed a different ROM in it thinking so sure that it will fix the issue but to big surprise, nothing has changed. Samsung bootanim and bootlogo are still there and still in bootloop. I tried to reflash one more time, wiped everything (Dalvik, etc.) but still no luck. Now, I came up with one last resort: flash stock ROM by SPFT (SP Flash Tool). So I downloaded the stock ROM for my device, flashed it by SPFT. With full hope that I fixed my device perfectly, still it did not change anything. Still the same problem occurred after flashing the Stock ROM. Now, I am trying to go to recovery, but it is just keeps on booting. Recovery (either CWM or stock) is no longer accessible.
PS: Before it happened, my device keeps on reminding me of xmodgames app which is installed in my device saying it is dangerous etc.
I will really appreciate you replies.
elfeds916 said:
Need some help! I woke up with my phone in bootloop (only Samsung logo). It is a MTK6589 device with Samsung S5 ROM specifically designed for this device. It is a rooted device with CWM recovery in it. I have been flashing ROMs for quite a long time. I flashed a different ROM in it thinking so sure that it will fix the issue but to big surprise, nothing has changed. Samsung bootanim and bootlogo are still there and still in bootloop. I tried to reflash one more time, wiped everything (Dalvik, etc.) but still no luck. Now, I came up with one last resort: flash stock ROM by SPFT (SP Flash Tool). So I downloaded the stock ROM for my device, flashed it by SPFT. With full hope that I fixed my device perfectly, still it did not change anything. Still the same problem occurred after flashing the Stock ROM. Now, I am trying to go to recovery, but it is just keeps on booting. Recovery (either CWM or stock) is no longer accessible.
PS: Before it happened, my device keeps on reminding me of xmodgames app which is installed in my device saying it is dangerous etc.
I will really appreciate you replies.
Click to expand...
Click to collapse
Well did you flash it with proper drivers installed? try flashing with fastboot if it doesnt work with sp flash tool...what different rom are you talking about? if its not meant for your device then you are in trouble
xmod wont do anythg btw
KingWilliams said:
Well did you flash it with proper drivers installed? try flashing with fastboot if it doesnt work with sp flash tool...what different rom are you talking about? if its not meant for your device then you are in trouble
xmod wont do anythg btw
Click to expand...
Click to collapse
Sir,
Thank you for your response.
Correct drivers are installed. I have not tried flashing it with fastboot and I do not know what fastboot is. XD . The ROM I am trying to flash is the stock ROM of my device.
elfeds916 said:
Sir,
Thank you for your response.
Correct drivers are installed. I have not tried flashing it with fastboot and I do not know what fastboot is. XD . The ROM I am trying to flash is the stock ROM of my device.
Click to expand...
Click to collapse
fastboot is the most preferred method of flashing a stock firmware. If you dont know about that then a look at this for downloading and setting up fastboot http://forum.xda-developers.com/showthread.php?t=2588979
and this for how to use fastboot http://forum.xda-developers.com/showthread.php?t=2277112
hope it helps
KingWilliams said:
fastboot is the most preferred method of flashing a stock firmware. If you dont know about that then a look at this for downloading and setting up fastboot http://forum.xda-developers.com/showthread.php?t=2588979
and this for how to use fastboot http://forum.xda-developers.com/showthread.php?t=2277112
hope it helps
Click to expand...
Click to collapse
Sir,
I have already fastboot. But when I try to put commang FASTBOOT DEVICES it shows nothing. I can not access my recovery mode as well. When I try to press Vol Down+Power, it shows 3 boot options: normal, recovery, fastboot. But I can not select any of the three.
elfeds916 said:
Sir,
I have already fastboot. But when I try to put commang FASTBOOT DEVICES it shows nothing. I can not access my recovery mode as well. When I try to press Vol Down+Power, it shows 3 boot options: normal, recovery, fastboot. But I can not select any of the three.
Click to expand...
Click to collapse
Ok how did u select the options? I hope u have selected using power Button ...alternative will be once u r on that screen u can try that command again
KingWilliams said:
Ok how did u select the options? I hope u have selected using power Button ...alternative will be once u r on that screen u can try that command again
Click to expand...
Click to collapse
Thank you for your response sir. But I was not able to select anything. I tried to press power button to select fastboot, but not working. When it is on that screen, adb/fastboot also can not detect it. It is not going to any kind of recovery . I am afraid, my phone is totally dead.