Model : Samsung galaxy s3 GT19300
I was using s5 sensation rom for my s3 gt19300 but was facing some problems. So i swithed to Glamour s5. The flashing process was successfully done (i wiped all cache,dalviks cache). Now when i start the phone the samsung logo appears and then the screen remains blank. Now i cant start my phone. Tried flashing the same file several times yet no progress( phone can start in recovery mode). Now i dont have any backup of the previous roms on my phone and cannot access phones internal memory as phone is not starting up. * Is there any way by which i can paste the previous rom on my phones internal memory and flash that? Or any other process using odin or anything so that i can get my phone back:crying:*
Tried various times by removing battery for a long time and flasing again and clearing cache and dalviks cache.
Any way to read phoneinternal memory on PC in recovery mode to paste the previous rom file.
Thanks in advance
ayushaggrawall said:
Model : Samsung galaxy s3 GT19300
I was using s5 sensation rom for my s3 gt19300 but was facing some problems. So i swithed to Glamour s5. The flashing process was successfully done (i wiped all cache,dalviks cache). Now when i start the phone the samsung logo appears and then the screen remains blank. Now i cant start my phone. Tried flashing the same file several times yet no progress( phone can start in recovery mode). Now i dont have any backup of the previous roms on my phone and cannot access phones internal memory as phone is not starting up. * Is there any way by which i can paste the previous rom on my phones internal memory and flash that? Or any other process using odin or anything so that i can get my phone back:crying:*
Tried various times by removing battery for a long time and flasing again and clearing cache and dalviks cache.
Any way to read phoneinternal memory on PC in recovery mode to paste the previous rom file.
Thanks in advance
Click to expand...
Click to collapse
download stock firmware from sammobile flash it with odin. after flashing stock rom boot into recovery wipe data, reboot system. It will boot
before flashing any rom at first flash stock rom then flash the custom roms beacuse clean install is always better.
In recovery
wipe data/factory reset
wipe cache
wipe dalvik cache
flash the rom
reboot system :good:
I suggest you to try blekota note 3 lite rom
---------- Post added at 10:23 PM ---------- Previous post was at 10:22 PM ----------
ayushaggrawall said:
Model : Samsung galaxy s3 GT19300
I was using s5 sensation rom for my s3 gt19300 but was facing some problems. So i swithed to Glamour s5. The flashing process was successfully done (i wiped all cache,dalviks cache). Now when i start the phone the samsung logo appears and then the screen remains blank. Now i cant start my phone. Tried flashing the same file several times yet no progress( phone can start in recovery mode). Now i dont have any backup of the previous roms on my phone and cannot access phones internal memory as phone is not starting up. * Is there any way by which i can paste the previous rom on my phones internal memory and flash that? Or any other process using odin or anything so that i can get my phone back:crying:*
Tried various times by removing battery for a long time and flasing again and clearing cache and dalviks cache.
Any way to read phoneinternal memory on PC in recovery mode to paste the previous rom file.
Thanks in advance
Click to expand...
Click to collapse
download stock firmware from sammobile flash it with odin. after flashing stock rom boot into recovery wipe data, reboot system. It will boot
before flashing any rom at first flash stock rom then flash the custom roms beacuse clean install is always better.
In recovery
wipe data/factory reset
wipe cache
wipe dalvik cache
flash the rom
reboot system :good:
I suggest you to try blekota note 4 lite rom
Sureshtuty said:
download stock firmware from sammobile flash it with odin. after flashing stock rom boot into recovery wipe data, reboot system. It will boot
before flashing any rom at first flash stock rom then flash the custom roms beacuse clean install is always better.
In recovery
wipe data/factory reset
wipe cache
wipe dalvik cache
flash the rom
reboot system :good:
I suggest you to try blekota note 3 lite rom
---------- Post added at 10:23 PM ---------- Previous post was at 10:22 PM ----------
download stock firmware from sammobile flash it with odin. after flashing stock rom boot into recovery wipe data, reboot system. It will boot
before flashing any rom at first flash stock rom then flash the custom roms beacuse clean install is always better.
In recovery
wipe data/factory reset
wipe cache
wipe dalvik cache
flash the rom
reboot system :good:
I suggest you to try blekota note 4 lite rom
Click to expand...
Click to collapse
did that and my phone is back to life. Thanks a ton. Btw is blekota note 4 lite rom good and can u suggest some more roms too. I want a rom which looks good (s5 senstation is awesome in terms of looks) and which is stable.........Thanks
ayushaggrawall said:
did that and my phone is back to life. Thanks a ton. Btw is blekota note 4 lite rom good and can u suggest some more roms too. I want a rom which looks good (s5 senstation is awesome in terms of looks) and which is stable.........Thanks
Click to expand...
Click to collapse
Blekota S5 Lite v12
Galaxy S5 Mini Alpha/A5 - 7.0
QS-i9300-KK
LukeROM
RESURRECTION REMIX 5.5.5[CM12.1][OPTIMIZED]
all are stable
Sureshtuty said:
Blekota S5 Lite v12
Galaxy S5 Mini Alpha/A5 - 7.0
QS-i9300-KK
LukeROM
RESURRECTION REMIX 5.5.5[CM12.1][OPTIMIZED]
all are stable
Click to expand...
Click to collapse
thanks...will definitely try them out
ayushaggrawall said:
thanks...will definitely try them out
Click to expand...
Click to collapse
Actually your problem with glamour rom is just the kernel. After flashing the rom, don't reboot but flash appropriate kernel then you reboot.
hansonchen said:
Actually your problem with glamour rom is just the kernel. After flashing the rom, don't reboot but flash appropriate kernel then you reboot.
Click to expand...
Click to collapse
I've got no idea about kernel. Can u plz explain the process to download it and flash it. Is it just like the normal process the way we flash ROM? Also suggest a good kernel...
Thanks in advance
ayushaggrawall said:
I've got no idea about kernel. Can u plz explain the process to download it and flash it. Is it just like the normal process the way we flash ROM? Also suggest a good kernel...
Thanks in advance
Click to expand...
Click to collapse
there are boeffla, agni & arter's kernel. go check out in android development section, it's using archiport ported rom 4.4.2. just download the kernel for 4.4.2 & flash it after flashing the rom in recovery.
http://forum.xda-developers.com/galaxy-s3/development/kernel-boeffla-kernel-5-2-27-03-2014-t1964572
http://forum.xda-developers.com/galaxy-s3/development/arter97-kernel-galaxy-s3-t2749849
http://forum.xda-developers.com/galaxy-s3/orig-development/kernel-12-06-2014-agni-purestock-i9300-t2237672
Related
i have been trying to flash a custom rom for quite some time now
i flash a standard rom from samfirmware everything works fine
then i root the phone foe clockwork recovery and super user
now no matter what rom i install all it does is reboot its self over and over
ive tried clearing catche and divlek and factory reset befor and after update but no joy please help me
JohnyBoy2o11 said:
i have been trying to flash a custom rom for quite some time now
i flash a standard rom from samfirmware everything works fine
then i root the phone foe clockwork recovery and super user
now no matter what rom i install all it does is reboot its self over and over
ive tried clearing catche and divlek and factory reset befor and after update but no joy please help me
Click to expand...
Click to collapse
What standard ROM did you use? Did you do a wipe after you installed Clockwork?
JohnyBoy2o11 said:
i have been trying to flash a custom rom for quite some time now
i flash a standard rom from samfirmware everything works fine
then i root the phone foe clockwork recovery and super user
now no matter what rom i install all it does is reboot its self over and over
ive tried clearing catche and divlek and factory reset befor and after update but no joy please help me
Click to expand...
Click to collapse
General steps before flashing a new ROM.
1. Backup your present ROM just incase
1. Wipe data/ factory reset
2. Wipe cache partition
3. Wipe dalvik cache (under advanced)
4. Format /system (under mount)
5. Flash your desired Rom/zips
6. Fix permissions (under advanced)
Notes:
- If you are moving from from an AOSP ROM to Samsung (vice versa), perform all the steps above.
- If you are upgrading / downgrading from one android version to another e.g ICS to jellybean or 4.0.3 to 4.0.4, also perform all the steps above.
- If you are upgrading from a Samsung ROM to another wipe the same android version, you may skip step 1.
- if you are upgrading your Aosp/aokp Rom with another with the same android version e.g 4.0.4 Aosp to 4.0.4 aokp, you may also skip step 1.
*******Important******
If you are presently running a Samsung based 4.0.4 Rom that is using Samsung based kernel e.g CF-ROOT or stock kernel, please flash Siyah kernel before performing any of the above steps. You will end up with an unusable device if you don't adhere to this important information.
Swyped from my Samsung Galaxy SII
JohnyBoy2o11 said:
i have been trying to flash a custom rom for quite some time now
i flash a standard rom from samfirmware everything works fine
then i root the phone foe clockwork recovery and super user
now no matter what rom i install all it does is reboot its self over and over
ive tried clearing catche and divlek and factory reset befor and after update but no joy please help me
Click to expand...
Click to collapse
Based on the bold, you're in a bootloop. Try to wipe data/ factory reset, clear cache and dalvic in cwm recovery and it should work
Edit: and are you following the steps on the first post of the thread? The creator of the rom usually has step by step instructions on how to install the rom
Sent from my Nexus 7 using xda premium
darkside super wipe
can i just use darkside super wipe before installing a new rom is that good enough
I used to have the same problem too, the problem was with my kernel, if you can, go into download mode and flash stock ROM then root using siyah
Sent from my GT-I9100 using xda premium
I have a galaxy S2 I9100M with bell mobility with ICS 4.0.3. It is rooted and running siyah kernel 4.1.2. And for some reason it will not flash ANY Rom. I do the whole wipe process. install the rom. and the phone just gets stuck on the Samsung screen. Won't boot into recovery only download mode? so i have to re flash my stock firmware through odin. I have tried many roms, all with the same outcome? I had previously flashed paranoid 4.1.1 and CM9 9.0.0 before but now it will not let me boot either. Is anyone else having this problem or does anyone know what I'm doing wrong?
Ethanp said:
I have a galaxy S2 I9100M with bell mobility with ICS 4.0.3. It is rooted and running siyah kernel 4.1.2. And for some reason it will not flash ANY Rom. I do the whole wipe process. install the rom. and the phone just gets stuck on the Samsung screen. Won't boot into recovery only download mode? so i have to re flash my stock firmware through odin. I have tried many roms, all with the same outcome? I had previously flashed paranoid 4.1.1 and CM9 9.0.0 before but now it will not let me boot either. Is anyone else having this problem or does anyone know what I'm doing wrong?
Click to expand...
Click to collapse
Sorry about that bro.
Visit this thread, for possible solution to your problem
Good luck
Something I do now after flashing a custom ROM is to "format /system" from the mount menu in recovery and also "fix permissions". Might be worth a try. Also, you could try removing folders on your SD card that contain data that are interfering with booting a custom ROM.
---------- Post added at 09:41 AM ---------- Previous post was at 09:06 AM ----------
Sorry, I should clarify what I said above, as format /system is done prior to flashing. What I do is:
Wipe data/factory reset
Mounts and storage-> Format /system
Flash custom ROM
Wipe Cache
Advanced-> Wipe dalvik cache
Fix permissions
Reboot
Thank's for the responses. I have tried both options and neither work. I managed to flash cm9 through odin but the gapps won't flash threw cwm and the home button is unresponsive in the rom. Very frustrating.
Ethanp said:
Thank's for the responses. I have tried both options and neither work. I managed to flash cm9 through odin but the gapps won't flash threw cwm and the home button is unresponsive in the rom. Very frustrating.
Click to expand...
Click to collapse
Your power button will work as home button too
Swyped from my Galaxy SII
Jokesy said:
Your power button will work as home button too
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yea i noticed that. I'm just going to keep it stock I don't want to damage it worse then it is.
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Robotr0n said:
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Click to expand...
Click to collapse
A.
If i get your question very well,
1. Your device can only boot if you restore your old ROM.
2. Anytime you flash a new ROM, you always end up in bootloops
Please correct me if i got something wrong.
B.
Please provide answers to these questions:
1. What's your ROM details? Press include your phone's model no (goto SETTINGS -About, post everything you see)
2. Was your device carrier branded?
3. Was your device SIMlocked?
4. Please post all the steps you normally take while flashing a new ROM
Swyped from my Galaxy SII
Jokesy said:
A.
If i get your question very well,
1. Your device can only boot if you restore your old ROM.
2. Anytime you flash a new ROM, you always end up in bootloops
Please correct me if i got something wrong.
B.
Please provide answers to these questions:
1. What's your ROM details? Press include your phone's model no (goto SETTINGS -About, post everything you see)
2. Was your device carrier branded?
3. Was your device SIMlocked?
4. Please post all the steps you normally take while flashing a new ROM
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Alright Sir,
A
1. Correct
2. Correct
B
1. GT-I9100, 4.0.4, I9100XXLPX
Kernel:
3.0.32-FLUXI-XX.01-RC5.2+
[email protected])) 1SMP PREEMPT Sun May 27 14:22:38 CEST 2012
Build No.
IMM76I
Mod version
RebelAOKP-1.3-ICS20120531-SGS2
2. No
3. No
4. It depends on ROM which I want flash. I always follow all the steps on installation info, but generally I always do full wipe, wipe dalvik & cache, install ROM, optionally gapps, then again wipe cache & dalvik, fix permissions and then reboot.
Robotr0n said:
Alright Sir,
A
1. Correct
2. Correct
B
1. GT-I9100, 4.0.4, I9100XXLPX
Kernel:
3.0.32-FLUXI-XX.01-RC5.2+
[email protected])) 1SMP PREEMPT Sun May 27 14:22:38 CEST 2012
Build No.
IMM76I
Mod version
RebelAOKP-1.3-ICS20120531-SGS2
2. No
3. No
4. It depends on ROM which I want flash. I always follow all the steps on installation info, but generally I always do full wipe, wipe dalvik & cache, install ROM, optionally gapps, then again wipe cache & dalvik, fix permissions and then reboot.
Click to expand...
Click to collapse
Do you have any ROM you want to flash now? If yes, please tell me the name of the Rom so that i can provide you with my own flashing instruction
Swyped from my Galaxy SII
Jokesy said:
Do you have any ROM you want to flash now? If yes, please tell me the name of the Rom so that i can provide you with my own flashing instruction
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yes, in my phone I have latest version of:
ParanoidAndroid 1.992,
Ressurection ROM V3.0.6
SlimBean Rom
(prefer ParanoidAndroid)
Robotr0n said:
Yes, in my phone I have latest version of:
ParanoidAndroid 1.992,
Ressurection ROM V3.0.6
SlimBean Rom
(prefer ParanoidAndroid)
Click to expand...
Click to collapse
Ok. I'm using paranoid too.
- boot to CWM recovery
- If you don't have a backup, please do it now
- wipe data/factory reset
- wipe dalvik cache
- flash paranoid ROM
- Reboot recovery (under Advanced)
- wipe data/factory reset
- format /system (under mount and storage)
- wipe dalvik cache
- flash ROM
- flash gapps (gapps 4.1)
- fix permissions
- reboot phone
All should be fine now.
Note: this is not a standard flashing method. I only tried as much as possible to remove possibility of another round of bootloops.
-
-
Swyped from my Galaxy SII
Jokesy said:
Ok. I'm using paranoid too.
- boot to CWM recovery
- If you don't have a backup, please do it now
- wipe data/factory reset
- wipe dalvik cache
- flash paranoid ROM
- Reboot recovery (under Advanced)
- wipe data/factory reset
- format /system (under mount and storage)
- wipe dalvik cache
- flash ROM
- flash gapps (gapps 4.1)
- fix permissions
- reboot phone
All should be fine now.
Note: this is not a standard flashing method. I only tried as much as possible to remove possibility of another round of bootloops.
-
-
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Thanks a lot but unfortunately, this did not help me. Stucked in bootloops again. :-/
if the above doesn't work try flashing stock from download mode - ODIN
Robotr0n said:
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Click to expand...
Click to collapse
I don't know if this will help but yeah.
http://forum.xda-developers.com/showthread.php?t=1108499
Robotr0n said:
Thanks a lot but unfortunately, this did not help me. Stucked in bootloops again. :-/
Click to expand...
Click to collapse
Something must have gone wrong somewhere. This shouldn't happen, normally.
Restore your backup. Sorry about that.
Can you confirm if the MD5 sum of the zips corresponds with the ones provided by the Rom developers?
Swyped from my Galaxy SII
serialteg said:
if the above doesn't work try flashing stock from download mode - ODIN
Click to expand...
Click to collapse
Thanks. I´ll try that.
Lushstep said:
I don't know if this will help but yeah.
http://forum.xda-developers.com/showthread.php?t=1108499
Click to expand...
Click to collapse
Also thanks, I was afraid of this, everytime when I´m flashing via ODIN I have bad feelings.
Jokesy said:
Something must have gone wrong somewhere. This shouldn't happen, normally.
Restore your backup. Sorry about that.
Can you confirm if the MD5 sum of the zips corresponds with the ones provided by the Rom developers?
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yes MD5 sums match and they are allright, I downloaded all of them today from official repositories. Also thanks for helping
I´m goind off to bed, long day full of flashing and bootlooping Thank you all guys. :good:
But guys, if I flash stock ROM via ODIN how this will help me ? I will be able to install newest ROMs properly ? It will remove my problem ? I´m so confused...
Robotr0n said:
But guys, if I flash stock ROM via ODIN how this will help me ? I will be able to install newest ROMs properly ? It will remove my problem ? I´m so confused...
Click to expand...
Click to collapse
Yeah. Going back to stock and starting afresh should solve this issue.
Download a 4.0.3 ICS firmware, to make things safer and faster
Swyped from my Galaxy SII
Jokesy said:
Yeah. Going back to stock and starting afresh should solve this issue.
Download a 4.0.3 ICS firmware, to make things safer and faster
Swyped from my Galaxy SII
Click to expand...
Click to collapse
OK, I´m going to try it now.
Robotr0n said:
OK, I´m going to try it now.
Click to expand...
Click to collapse
Perform a factory data reset in recovery before flashing via Odin
Swyped from my Galaxy SII
Jokesy said:
Perform a factory data reset in recovery before flashing via Odin
Swyped from my Galaxy SII
Click to expand...
Click to collapse
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Can you not provide a logcat?
Sent from my Galaxy S2 running JellyBean
Robotr0n said:
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Click to expand...
Click to collapse
i believe something is either wrong with the zip files you downloaded, or something else.
You shouldn't be facing all these
Swyped from my Galaxy SII
---------- Post added at 06:54 AM ---------- Previous post was at 06:27 AM ----------
Robotr0n said:
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Click to expand...
Click to collapse
Ok.
Any other time you face bootloops, Try this:
- flash Siyah kernel (4.x.x zip) via CWM recovery
-reboot phone
Swyped from my Galaxy SII
*boy*racer* said:
Can you not provide a logcat?
Sent from my Galaxy S2 running JellyBean
Click to expand...
Click to collapse
I don´t know how to get these logcats.
Jokesy said:
i believe something is either wrong with the zip files you downloaded, or something else.
You shouldn't be facing all these
Swyped from my Galaxy SII
---------- Post added at 06:54 AM ---------- Previous post was at 06:27 AM ----------
Ok.
Any other time you face bootloops, Try this:
- flash Siyah kernel (4.x.x zip) via CWM recovery
-reboot phone
Swyped from my Galaxy SII
Click to expand...
Click to collapse
You really think that all these files which I downloaded are damages ? Uhm I don´t know but I don´t think so.
I tried this with Siyah kernel once and nothing happend. But I´ll give it a try again.
EDIT:
OH, God. I tried different stock ROM and even the new stock ROM wont boot... after i restart mobile, I´m in factory mode :-/
How to do a logcat
Ok so this is what i do.
. Download attachment and extract anywhere
.Open up Platform-tools folder and hold Shift+right click on an empty space within the folder.
.Click on "Open command window here"
.In the command window, type "adb logcat"
.Plug in device & turn it on
.It should do a logcat
leave it for about 1 min then disconnect device. Right click the logcat and select mark then highlight all and right click again. go to pastebin.com or something like that then paste it and save and give us the link.
hope this helps
After I flashed stock ROM. The Phone keeps on blinking Samsung Galaxy S3 GT I9300 Logo. Doesn't start. Tried reflashing other stock ROMs. Tried Factory Reset as well..Please Help
You can try flashing Philz recovery via odin, then run a mega wipe script to fully format system, data and preload.
In recovery does it show any errors?
boomboomer said:
You can try flashing Philz recovery via odin, then run a mega wipe script to fully format system, data and preload.
In recovery does it show any errors?
Click to expand...
Click to collapse
No error is shown...but the android robot logo appears with a red indicator(red hazard sign) at top...but wipe cache and data works perfectly..
Try using a usb jig, them flash tje r with full wipe.
Sent from my HTC HD2 using xda app-developers app
tatz619 said:
After I flashed stock ROM. The Phone keeps on blinking Samsung Galaxy S3 GT I9300 Logo. Doesn't start. Tried reflashing other stock ROMs. Tried Factory Reset as well..Please Help
Click to expand...
Click to collapse
in download mode what does it show under PRODUCT NAME? if it is empty, the phone is screwed and service center in required.
boomboomer said:
You can try flashing Philz recovery via odin, then run a mega wipe script to fully format system, data and preload.
In recovery does it show any errors?
Click to expand...
Click to collapse
Tried mega wipe.zip from this thread. http://forum.xda-developers.com/showthread.php?t=1832326
No use..
Tried formatting everything using Philz recovery.. no use...
tatz619 said:
Tried mega wipe.zip from this thread. http://forum.xda-developers.com/showthread.php?t=1832326
No use..
Tried formatting everything using Philz recovery.. no use...
Click to expand...
Click to collapse
Read and reply to post 7
sriram231092 said:
in download mode what does it show under PRODUCT NAME? if it is empty, the phone is screwed and service center in required.
Click to expand...
Click to collapse
Product Name shows GT I9300...
tatz619 said:
Tried mega wipe.zip from this thread. http://forum.xda-developers.com/showthread.php?t=1832326
No use..
Tried formatting everything using Philz recovery.. no use...
Click to expand...
Click to collapse
What firmware are you flashing ??
Did you initially flash a wrong firmware ??
Hi
I'm new to the forums and just wondering if anyone can help me out.
I've just started exploring custom ROMs and the like. I've flashed and rooted my Galaxy SIII about four times and never had any problems. Just yesterday I flashed the latest stable build of Slimbean and when I went to root it afterwards it completed the process but wouldn't start. Now it's stuck in a boot loop. I can't access download or recovery mode. Please Help!!!!!!!!
rmamaniac said:
Hi
I'm new to the forums and just wondering if anyone can help me out.
I've just started exploring custom ROMs and the like. I've flashed and rooted my Galaxy SIII about four times and never had any problems. Just yesterday I flashed the latest stable build of Slimbean and when I went to root it afterwards it completed the process but wouldn't start. Now it's stuck in a boot loop. I can't access download or recovery mode. Please Help!!!!!!!!
Click to expand...
Click to collapse
Your question is posted multiple times SEARCH/
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Wipe data + cache + davlik cache
---------- Post added at 01:32 PM ---------- Previous post was at 12:53 PM ----------
if doesn't work re update your device
TheDarkLegend said:
Wipe data + cache + davlik cache
---------- Post added at 01:32 PM ---------- Previous post was at 12:53 PM ----------
if doesn't work re update your device
Click to expand...
Click to collapse
How can I wipe cache or preform a factory reset if i can't access recovery mode?
Hello everyone, I'm Aly. The problem I'm facing with my SII is that whenever I flash the stock firmware, I successfully see the bootup animation but it keeps repeating again and again. I've tried:
1.Downloading the firmware again ( thought it was corrupt)
2.Factory resetting the phone it stock, CWM and TWRP recovery
3.Tried plugging the USB cable in ALL USB PORTS!!
4.Tried flashing a custom rom but still didn't work
5.Wiped Data, System, Cache, Internal Storage, Dalvik Cache
It all started when I flashed Lineage OS on my phone. I successfully flashed it and it was working. I used it for almost a month.
Then I decided to switch to lollipop after flashing the stock firmware. But after that I was able to flash roms but all were stuck at the boot loop
The stock firmware didnt work either
Please help me get out of this problem...
Aly Rezz said:
Hello everyone, I'm Aly. The problem I'm facing with my SII is that whenever I flash the stock firmware, I successfully see the bootup animation but it keeps repeating again and again. I've tried:
1.Downloading the firmware again ( thought it was corrupt)
2.Factory resetting the phone it stock, CWM and TWRP recovery
3.Tried plugging the USB cable in ALL USB PORTS!!
4.Tried flashing a custom rom but still didn't work
5.Wiped Data, System, Cache, Internal Storage, Dalvik Cache
It all started when I flashed Lineage OS on my phone. I successfully flashed it and it was working. I used it for almost a month.
Then I decided to switch to lollipop after flashing the stock firmware. But after that I was able to flash roms but all were stuck at the boot loop
The stock firmware didnt work either
Please help me get out of this problem...
Click to expand...
Click to collapse
Stock rom won't work because it needs 512mb preload partition, you repartitioned your phone with a pit that decreases preload partition to 45mb, if you want to get back to stock, you need to repartition your phone with the original pit file, or use a pit that supports 1gb system partition and 512mb preload at the same time.
Use pits from the zip attached with the first post in saber's guide to have preload 512mb with system 1.5 gb:
http://forum.xda-developers.com/gal...s/mod-increase-partition-size-t3011162/page42
Thanks it worked!!
Aly Rezz said:
Thanks it worked!!
Click to expand...
Click to collapse
No problem, glad to help
having the same issue now
Aly Rezz said:
Hello everyone, I'm Aly. The problem I'm facing with my SII is that whenever I flash the stock firmware, I successfully see the bootup animation but it keeps repeating again and again. I've tried:
1.Downloading the firmware again ( thought it was corrupt)
2.Factory resetting the phone it stock, CWM and TWRP recovery
3.Tried plugging the USB cable in ALL USB PORTS!!
4.Tried flashing a custom rom but still didn't work
5.Wiped Data, System, Cache, Internal Storage, Dalvik Cache
It all started when I flashed Lineage OS on my phone. I successfully flashed it and it was working. I used it for almost a month.
Then I decided to switch to lollipop after flashing the stock firmware. But after that I was able to flash roms but all were stuck at the boot loop
The stock firmware didnt work either
Please help me get out of this problem...
Click to expand...
Click to collapse
I've been having the same issue for few days now. my phone model is GT-I9100T
---------- Post added at 08:10 PM ---------- Previous post was at 07:56 PM ----------
Aly Rezz said:
Hello everyone, I'm Aly. The problem I'm facing with my SII is that whenever I flash the stock firmware, I successfully see the bootup animation but it keeps repeating again and again. I've tried:
1.Downloading the firmware again ( thought it was corrupt)
2.Factory resetting the phone it stock, CWM and TWRP recovery
3.Tried plugging the USB cable in ALL USB PORTS!!
4.Tried flashing a custom rom but still didn't work
5.Wiped Data, System, Cache, Internal Storage, Dalvik Cache
It all started when I flashed Lineage OS on my phone. I successfully flashed it and it was working. I used it for almost a month.
Then I decided to switch to lollipop after flashing the stock firmware. But after that I was able to flash roms but all were stuck at the boot loop
The stock firmware didnt work either
Please help me get out of this problem...
Click to expand...
Click to collapse
MigoMujahid said:
Stock rom won't work because it needs 512mb preload partition, you repartitioned your phone with a pit that decreases preload partition to 45mb, if you want to get back to stock, you need to repartition your phone with the original pit file, or use a pit that supports 1gb system partition and 512mb preload at the same time.
Use pits from the zip attached with the first post in saber's guide to have preload 512mb with system 1.5 gb:
http://forum.xda-developers.com/gal...s/mod-increase-partition-size-t3011162/page42
Click to expand...
Click to collapse
Will this work on my I9100TGT model ?
psdfan said:
I've been having the same issue for few days now. my phone model is GT-I9100T
---------- Post added at 08:10 PM ---------- Previous post was at 07:56 PM ----------
I'm new here, sorry if my question sound a bit stupid. I couldn't find the attached zip file on that post. Where can I find the pit file?
Click to expand...
Click to collapse
These pit files are 1.5 gb system:
https://forum.xda-developers.com/attachment.php?attachmentid=3800723&d=1467442898
And those pit files are 1gb system:
https://forum.xda-developers.com/attachment.php?attachmentid=2609097&d=1393755193
For your first problem about the bootloap after flashing stock firmware, you need to reboot to stock recovery and wipe data and cache and then reboot.
Thanks for your help
Sent from my Samsung Galaxy S II using XDA Labs
[email protected] said:
Thanks for your help
Click to expand...
Click to collapse
No problem, glad i helped