I am trying to change an update.zip file back to the three components system.img, boot.img, and recovery.img. I have tried creating the system.img but when i do so the permissions are wrong on the files. (update script is not run on it to change permissions)
For boot.img i can repackage it by splitting the blob but when i do it i am not sure what base value to use. when using mkbootimg
i was wondering if there was a way to convert it back to those components in some more automated way....
I am not sure but possible emulating the install of update.zip then harvesting the img files?
I have a system.img file, which I extracted from a 20J KDZ. I would now like to convert it into a flashable zip. I have 2 reasons for this. One, I dont want to have to use LGUP to revert my phone to a 100% stock system. It is much easier to just flash a zip of the system partition. Two, I would like to get into modding and ROM development. I believe that it is best to start from pure stock and make changes from there, instead of basing your work off of something that someone else has already modded.
I found these threads but they're a bit old (Lollipop):
1. http://forum.xda-developers.com/lg-v10/development/lg-h901-stock-img-files-boot-recovery-t3238638
2. http://forum.xda-developers.com/tmobile-lg-v10/development/lg-h901-stock-images-device-restore-t3241170
In one of them a member provided img's for recovery, boot, and system. In the other thread flashable zips of these img's were posted. These are for the Tmo v10. So it's not a matter of whether it can be done, but how. What tools are needed?
I downloaded the zip from one of the aforementioned threads, deleted the boot.img, replaced his system.img with mine, edited updater-script, and zipped up the meta-inf and system.img files with 7zip. I also checked to be sure that the block to be flashed was correct, it is the same (even though my img is for MM). I tried flashing with TWRP, I immediately get an error code 6.
What should I do?
Just off the subject slightly...but Eliminater74 already has a flashable zip (thought TWRP) for the 20J release. Its a 2 Part System.
Eliminator74's zip is modified. I want to take a 100% pure stock system.img (extracted from stock firmware) and put it into a zip that can be flashed in TWRP. When I say stock, that's what I mean. No root, no Xposed, no BusyBox, nothing. This has already been done for Lollipop on the v10, but I have MM. I have already explained why I want to do this. I'm currently looking into whether Superr's Kitchen can accomplish this.
He has a Fully Stock 20J release..just gotta read the thread..
AnonVendetta said:
I have a system.img file, which I extracted from a 20J KDZ. I would now like to convert it into a flashable zip. I have 2 reasons for this. One, I dont want to have to use LGUP to revert my phone to a 100% stock system. It is much easier to just flash a zip of the system partition. Two, I would like to get into modding and ROM development. I believe that it is best to start from pure stock and make changes from there, instead of basing your work off of something that someone else has already modded.
I found these threads but they're a bit old (Lollipop):
1. http://forum.xda-developers.com/lg-v10/development/lg-h901-stock-img-files-boot-recovery-t3238638
2. http://forum.xda-developers.com/tmobile-lg-v10/development/lg-h901-stock-images-device-restore-t3241170
In one of them a member provided img's for recovery, boot, and system. In the other thread flashable zips of these img's were posted. These are for the Tmo v10. So it's not a matter of whether it can be done, but how. What tools are needed?
I downloaded the zip from one of the aforementioned threads, deleted the boot.img, replaced his system.img with mine, edited updater-script, and zipped up the meta-inf and system.img files with 7zip. I also checked to be sure that the block to be flashed was correct, it is the same (even though my img is for MM). I tried flashing with TWRP, I immediately get an error code 6.
What should I do?
Click to expand...
Click to collapse
What tool did you use to extract the KDZ? I am trying to get a stock boot.img for the H901J build and I cannot seem to find it. I used the WindowsLGFirmwareExtract 1.2.5.0 release and all I see are a ton of .bin files and system.img. Is boot.img inside system.img?
@Sippi4x4man: I also used WindowsLGFirmwareExtract. Inside the KDZ there is a DZ and DLL file. Just extract the DZ, then you see lots of BINs. The system.img is split up (since it's around 4GB alone), but the tool can combine the pieces into one file. I was able to figure out how to manually flash the IMG, by running a dd command with TWRP's terminal emulator.
dd if=/external_sd/system.img of=/dev/block/platform/f9824900.sdhci/by-name/system
It takes a few minutes to finish, followed by a message that says no more space is available (I guess /system got filled up). I think when you dd anything you are copying both free and used space, since an IMG is usually just a (sometimes raw) disk image. TWRP will also initially say that no system is installed, I just ignored it, the device boots fine, everything is pure stock, no issues at all. System is mountable after subsequent boots into recovery. I used Magisk and the phh Superuser Magisk module to gain root without modding system partition, and the Magisk version of Xposed. But I would still like to create a flashable zip to automate this. If I figure it out I don't mind uploading it so the community can benefit.
As for the stock boot.img, I would imagine that the boot.bin inside the DZ is probably what you're after. The file size seems about right. However, I tried renaming boot.bin to boot.img and flashing from TWRP. Device wouldn't boot. So maybe there is some other conversion process that needs to be done. I can't think of any other way to obtain a pure stock boot image, extracting it from stock firmware seems like a sure way. If you ever figure it out then please provide a copy. Make sure it isn't patched by SuperSU, Xposed, Magisk, etc. I could maybe merge it into a stock zip.
AnonVendetta said:
@Sippi4x4man: I also used WindowsLGFirmwareExtract. Inside the KDZ there is a DZ and DLL file. Just extract the DZ, then you see lots of BINs. The system.img is split up (since it's around 4GB alone), but the tool can combine the pieces into one file. I was able to figure out how to manually flash the IMG, by running a dd command with TWRP's terminal emulator.
dd if=/external_sd/system.img of=/dev/block/platform/f9824900.sdhci/by-name/system
It takes a few minutes to finish, followed by a message that says no more space is available (I guess /system got filled up). I think when you dd anything you are copying both free and used space, since an IMG is usually just a (sometimes raw) disk image. TWRP will also initially say that no system is installed, I just ignored it, the device boots fine, everything is pure stock, no issues at all. System is mountable after subsequent boots into recovery. I used Magisk and the phh Superuser Magisk module to gain root without modding system partition, and the Magisk version of Xposed. But I would still like to create a flashable zip to automate this. If I figure it out I don't mind uploading it so the community can benefit.
As for the stock boot.img, I would imagine that the boot.bin inside the DZ is probably what you're after. The file size seems about right. However, I tried renaming boot.bin to boot.img and flashing from TWRP. Device wouldn't boot. So maybe there is some other conversion process that needs to be done. I can't think of any other way to obtain a pure stock boot image, extracting it from stock firmware seems like a sure way. If you ever figure it out then please provide a copy. Make sure it isn't patched by SuperSU, Xposed, Magisk, etc. I could maybe merge it into a stock zip.
Click to expand...
Click to collapse
It's been a while from this post... But I'm looking after the same goal you were and got the same error 6 trying the same things you described in your previous posts. Despite of these long 4 years, let me try: did you finally achieve to make the flashable zip with system.img?
I do not own an LG V10 anymore.....it is the most garbage phone I've ever had.
I now use SuperR's Kitchen to create flashable zip from system.img. Works like a charm every time. Downside is that you need a PC to use it. It works for all phones (but you must also have an unlocked bootloader and custom recovery, or you will not be able to flash the zip). There are both free and donate versions, both will work fine.
AnonVendetta said:
I do not own an LG V10 anymore.....it is the most garbage phone I've ever had.
I now use SuperR's Kitchen to create flashable zip from system.img. Works like a charm every time. Downside is that you need a PC to use it. It works for all phones (but you must also have an unlocked bootloader and custom recovery, or you will not be able to flash the zip). There are both free and donate versions, both will work fine.
Click to expand...
Click to collapse
Thank you for your reply. My device is Lenovo Z6 Pro but I thought this wouldn't make a difference.
Just to be sure, what you get with SuperR's Kitchen is a zip including system.img file and not the /system folder, right? Thank you in advance.
Edit: I had tried with other kitchen softwares with no success but SuperR's Kitchen did the job as you said, like a charm. Tons of thanks.
@descarao81: No, SuperR's Kitchen does not include system.img/boot.img, you must provide them yourself. They are device-specific. And system.img is a very large file, so it cannot reasonably be included in the Kitchen zip.
Yeah, maybe I wasn't clear, I meant if the resultant zip would include those raw image files being the original image files provided by the user. It's clear now. Thank you.
Here is how to do it...
1. Go to:
https://forum.xda-developers.com/tm.../lg-h901-stock-images-device-restore-t3241170
Download from the link he provided.
2. Extract the .zip file that you downloaded.
3. Make a new folder called "rom"
4. Copy the META-INF folder from the folder you extracted and place it into the "rom" folder.
5. Download any other flashable rom for your device. Extract it.
6. Go to {EXTRACTED_FLASHABLE_ROM}\META-INF\com\google\android\update-binary in your flashable extracted rom folder. Copy the "update-binary" . Got to the "rom" folder and go to META-INF\com\google\android. Delete the update-binary there and replace it with the one you have copied.
7. Now copy the boot.img from the other rom that is for your device. And place it into the "rom" folder.
8. Now Finally Compress the all the files.
9. Now you will have a flashable system.img.
10. Go to TWRP and flash the .zip that you have just made!
Upytry2 said:
Here is how to do it...
1. Go to:
https://forum.xda-developers.com/tm.../lg-h901-stock-images-device-restore-t3241170
Download from the link he provided.
2. Extract the .zip file that you downloaded.
3. Make a new folder called "rom"
4. Copy the META-INF folder from the folder you extracted and place it into the "rom" folder.
5. Download any other flashable rom for your device. Extract it.
6. Go to {EXTRACTED_FLASHABLE_ROM}\META-INF\com\google\android\update-binary in your flashable extracted rom folder. Copy the "update-binary" . Got to the "rom" folder and go to META-INF\com\google\android. Delete the update-binary there and replace it with the one you have copied.
7. Now copy the boot.img from the other rom that is for your device. And place it into the "rom" folder.
8. Now Finally Compress the all the files.
9. Now you will have a flashable system.img.
10. Go to TWRP and flash the .zip that you have just made!
Click to expand...
Click to collapse
Trying that exactly when im home! Thank you!
HI! Is there any way to flash a custom rom using PC?
SP FLash tool needs a scatter file
but my ROM doesnt have any.
I tried to make my own scatter file but I cant find the system.img
The system.img is a folder
how can i convert the system folder to system.img?
PLS HELP
Ive done this but it was year's ago while making an odin flashable firmware for sgh-t599. Sorry to say I can't remember the procedure but I used guides so the info is out there.
You'll need Linux, and you must know the size of system partition and if it need to be raw img format or sparse img format.
With the right commands these img's can also be extracted straight from a working device.
I was looking to attempt to root a phone (Asus zenfone v520kl) and stumbled upon a problem that I am stuck on and can't find a solid answer to.
Basically, the phone's bootloader is now unlocked and has the WW 3.3 firmware ( https://mega.nz/#!l7wBlQ4B!uB63yH5Rir24GaSfDMWKowqdz-N_sc6SJ-q1WuuGiqM/ ). I was planning on patching the boot.img with MAGISK but 7-Zip does not properly extract boot.img from the .raw file. (boot.img, system.img, cache.img and recovery.img end up with erros and their file size ends up with 0 after extracting. Most of the other img seem to extract just fine.)
So my questions:
1) is there another program that might be able to extract the .raw file. Suggested ways was 7zip or rename extension to .zip and extract which doesn't work either. Also downloading from different websites yield the same problem as they all seem to be the same file. If not,
2) Might there be a way to extract boot.img from the phone itself. (Making matters worse, the phone doesn't have root access and booting to recovery doesn't work. There is also no TWRP for this phone. I did try using TWRP for zenfone 3 deluxe for fun, but that ends up with a black screen.)