Running Windows 10 64x. Flashtool won't open.
Installed the latest version. Both 32x & 64x won't open. I get a loading icon over my mouse and nothing. Compatibility mode isn't working. Installed all drivers, not sure what's wrong with it.
How can I get this working?
And how can I uninstall all the drivers I won't be needing?
what about windows 7. flash tool works good for me on windows 7. now if don't have a PC with windows 7 then look on instructions on how to use flash tool with windows 8/10. why not dual OS 7 & 10?
Proxish said:
Running Windows 10 64x. Flashtool won't open.
Installed the latest version. Both 32x & 64x won't open. I get a loading icon over my mouse and nothing. Compatibility mode isn't working. Installed all drivers, not sure what's wrong with it.
How can I get this working?
And how can I uninstall all the drivers I won't be needing?
Click to expand...
Click to collapse
For me, it works fine with Windows 10. I installed the same version which I had used in Windows 8.1. Are you sure you are using the same tool which you had used previously (in Window 7 or 8) ?
jaime4272 said:
what about windows 7. flash tool works good for me on windows 7. now if don't have a PC with windows 7 then look on instructions on how to use flash tool with windows 8/10. why not dual OS 7 & 10?
Click to expand...
Click to collapse
I don't have space to boot a dual OS, and don't have access to a machine with Windows 7 unfortunately.
gurung_vishwas1 said:
For me, it works fine with Windows 10. I installed the same version which I had used in Windows 8.1. Are you sure you are using the same tool which you had used previously (in Window 7 or 8) ?
Click to expand...
Click to collapse
Last time I used Flashtool was around 4-6 months ago.
I'll try a couple of different versions, and hopefully one of them works.
well I hope you can make it work. I always have dual OS just in case the new OS is incompatible with old stuff?
flashtool start - stop in W10
jaime4272 said:
well I hope you can make it work. I always have dual OS just in case the new OS is incompatible with old stuff?
Click to expand...
Click to collapse
You started flashtool and closed it. It is still active in the background.
start task manager (CTRL-SHIFT-ESC)
you will see flashtool in the list. Right click on it and close task.
then you can start flashtool again.
Try right-clicking on Flashtool then go to Properties>Compatibility>Run in Compatibility Mode, and then select one of the older OS and see if that works. Also try running as Administrator mode.
stevencumps said:
You started flashtool and closed it. It is still active in the background.
start task manager (CTRL-SHIFT-ESC)
you will see flashtool in the list. Right click on it and close task.
then you can start flashtool again.
Click to expand...
Click to collapse
Do you know how I can do this on a Mac? Flashtool does not show up in the Force Quit window, and only grayed out in the Energy tab of the Activity Monitor.
I'd also like to add that I have rebooted my computer twice and the problem has persisted. I originally installed v0.9.19.8 which opened fine. Then I learned that I needed the previous version, so I downloaded that. When I tried to open it, it simply did not do anything. Now, neither version will open.
Upon further inspection, I've noticed in the Activity Monitor that FlashTool does open briefly after I click Open, but closes automatically. The UI never shows up. Any suggestions?
I'm having the same problem
Same problem, how to solve this issue?
Related
I'm trying to flash CWM to my daughter's new GT I5500 but keep running into the above error message. The same thing happens after rebooting the phone (into recovery download mode), with different USB ports, different USB cables and with 2 different Windows 7 PCs. Any ideas? I've used Odin 4.28 & 4.34 and have the correct Samsung USB drivers installed. Thanks
Managed to get it to work on my Windows XP laptop so it must have been a drivers problem.
dwl99 said:
Managed to get it to work on my Windows XP laptop so it must have been a drivers problem.
Click to expand...
Click to collapse
Download and install Samsung kies for the drivers.
Update Keis and try again and set to download mode, maybe that will work.
LightWaveX said:
Update Keis and try again and set to download mode, maybe that will work.
Click to expand...
Click to collapse
Thanks, I already tried all that before posting but it didn't work. It's a bit of a pest having to boot my lappy into XP to do any flashing but at least it works.
Uninstall KIES,reboot,install KIES and driver,reboot. Plug it in to the other usb port,it should work
Sent from my blek krupuk
have you tried running as administrator in Windows 7? (right click -> run as administrator)
for me it failed with the same error till i've started running as admin.
if this doesn't work go to compatibility properties and check Always runs as administrator, then right click, run as admin.
rpadula said:
have you tried running as administrator in Windows 7? (right click -> run as administrator)
for me it failed with the same error till i've started running as admin.
if this doesn't work go to compatibility properties and check Always runs as administrator, then right click, run as admin.
Click to expand...
Click to collapse
Thanks, yes I had tried that as well. I spent some time looking for a solution online prior to posting & it seems to be quite a widespread problem.
well today i started having the same problems as you...
had try in another computer (Win7) and worked flawlessly
rpadula said:
well today i started having the same problems as you...
had try in another computer (Win7) and worked flawlessly
Click to expand...
Click to collapse
Were either of your PCs running Win7 64-bit?
The drivers don't work in Windows 8 Pro 64 bit
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Srsly? Noone care to respond?
google it for samsung usb driver
then download and install
XeactorZ said:
google it for samsung usb driver
then download and install
Click to expand...
Click to collapse
Thx for reply, but ofc I already done that.
Install Kies, it should be enough
《tapatalked from galaxy s3》
compatibility mode
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
Try right click - compatibility mode you should be able to install.
bala_gamer said:
Install Kies, it should be enough
《tapatalked from galaxy s3》
Click to expand...
Click to collapse
Samsung Kies 2.3.3.12085_7_5 work with Windows 8 9200...:good:
I'm using windows 8 x64, I had no trouble installing the drivers.. I just put the phone in download mode and connected the usb cable and the drivers were automatically installed.
Sent from my GT-I9300 using xda app-developers app
Hello all.
I too have Windows 8 RTM 9200 x64.
Kies 2.3.3.12085_7 INSTALLS fine, and the app RUNS fine.
Also, when I put the phone in download mode, Win8 DOES automatically find a device, but....
1. Kies can never find the phone (obviously not when in download, I mean in normal mode). Just keeps telling me to turn off debugging (which is not on!). Tells me: "Reconnect the device in Samsumg Kies (PC Studio) mode. Current connection mode not supported by Kies. Check USB settings."
2. Odin 1.85, 1.87 and 3.04 can never see the phone in download mode. Just nothing as if not connected.
For you guys who have it working in Win8, can you confirm that Kies can actually SEE the phone (running the app is the easy bit!), and that if you go into download mode, that Odin can see the device?
I can pass things thru on a virtual USB port to a Virtual Machine of Win7, but cant never actually get any functional use in (host) Win8.
Thanks.
EDIT: I downloaded Kies from Samsung page and it seems to be very slightly newer than mine, now version 2.3.3.12085_7_5. NOW, Odin CAN see the device in download mode which is what I really wanted for flashing purposes. Kies itself now no longer instantly complains about the USB setting, but iinstead just spins its wheel and never connects. But Kies stinks and never use it anyway, so not too fussed. Really just wanted Odin so that's cool.
Downloaded THIS Kies: http://www.samsungapps.com/about/onPc.as
Can you extract the USB Driver msi from the instllation and upload it here? Thanks!\
Edit:
Found it!
http://www.mediafire.com/?4y1a2opm8o3ihfx
Now my Note is back under my Windows 8 64x RTM!
Interesting!
Your mediafire download LOOKS like the same version that my Kies installed, but when I installed your version over my pre-existing one, now Kies can see my phone!
Excellent!
Thanks!
Hope this all helps someone else too.
I ran Windows 8 for exactly 2 days. I ain't gonna touch that with a 10ft pole ever again. Went back to Win7.
Lemme just tell ya: Windows 8 sucks big time. It's so bad it both sucks and blows at the same time.
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
¦¦
\/
Signature that should help you ^^
EDIT: Use the search button. Prevemts spam, and unneccessary threads, like this. I posted that thread in the Android general Discussion and Galaxy Nexus forum. Works on all phones..
I love windows 8 and am going to give these a go. Thank you.
Sent from my SCH-I535 using xda premium
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
i just installed win 8 m gonna try win 7 drivers in compatibility mode...will let you knowifit works
---------- Post added at 04:53 PM ---------- Previous post was at 04:37 PM ----------
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
hi i just tried windows 7 usb drivers for s3......and guess what ...................IT WORKS.....all you have to do is run the drivers in compatibility mode and select windows seven
First right click on the divers file and select properties
then select compatibility
select "run this program in compatibility mode for"
then select windows seven in the drop down menu
and then select "Run this program as an Administrator"
and then press OK
DONE
double click the driver file and install it.........Enjoy
Simonetti2011 said:
I ran Windows 8 for exactly 2 days. I ain't gonna touch that with a 10ft pole ever again. Went back to Win7.
Lemme just tell ya: Windows 8 sucks big time. It's so bad it both sucks and blows at the same time.
Click to expand...
Click to collapse
Using a 4 year old Dell Latitude XT2 that originally came with Vista on it with a fresh install of Windows 8. Love the device. Multi touch screen works right away and all features work great. Having a blast with Windows 8. Just need the right hardware and it is a perfect operating system. Best of both worlds, tablet and laptop.
There's no need to install Kies to use the phone as mass storage.
Only if you want to flash things though Odin.
I'm using Windows 8 Pro 64bits and I can confirm this. :good:
Windows update Will do the job.
Connect the phone and then search on Windows update.
Sent from my GT-I9300 using xda app-developers app
Hi, got Kies update to 2.5.0.12094_28 and everything works fine under Win8. Drivers insatlled, phone found. The update has got todays date, Nov/10/2012.
Windows 8 upgrade went fine with the samsung/android drivers.. Infact everything is fine on my end (Full win7 img) just incase
Sent from my Transformer Prime TF201 using xda premium
been trying to flash my lumia 800 with the latest software with nokia care suite and the program is not detecting my phone for some reason I have Windows 8 pro x64 I have installed the 64bit driver and its not showing on the left hand side does anybody have any ideas thanks.
ncs lumia 800 flashing error
managed to connect phone in the end but still doesn't flash as it says its flashing then nothing happens and displays an error?
hi. my does the same and i never figured out why but try this:
Change the name of the firmware folder from RM-801 to RM-817.
Untick automatic product detection.
Go to "File -> Open product" and select RM-817.
Programing-> Recovery and click in update list and connect it to pc pressing the VOLUP key and it Start.
IF THE PHONE IS SIM UNLOCKED IT PROBALY WILL LOCK AGAIN. MY DID
r3l4x_pt said:
hi. my does the same and i never figured out why but try this:
Change the name of the firmware folder from RM-801 to RM-817.
Untick automatic product detection.
Go to "File -> Open product" and select RM-817.
Programing-> Recovery and click in update list and connect it to pc pressing the VOLUP key and it Start.
IF THE PHONE IS SIM UNLOCKED IT PROBALY WILL LOCK AGAIN. MY DID
Click to expand...
Click to collapse
I managed to do it in the end the problem was to do with the windows 8 64bit It works fine on windows 7 32bit.
ngilbert89 said:
I managed to do it in the end the problem was to do with the windows 8 64bit It works fine on windows 7 32bit.
Click to expand...
Click to collapse
Well, I used windows 8 64 bit and had no specific issues... Just installed most drivers from ncs folder, updated to the latest version and everything went perfectly...
ngilbert89 said:
I managed to do it in the end the problem was to do with the windows 8 64bit It works fine on windows 7 32bit.
Click to expand...
Click to collapse
It's not Windows 8's fault (I flashed the ROM using Windows 8 Enterprise 64-bit) , did have to reconnect the Phone once though.
Noppes123 said:
It's not Windows 8's fault (I flashed the ROM using Windows 8 Enterprise 64-bit) , did have to reconnect the Phone once though.
Click to expand...
Click to collapse
any ideas what the problem is then as it wouldn't work in Windows 8 but tried it on a Windows 7 PC and I was able to flash?
ngilbert89 said:
any ideas what the problem is then as it wouldn't work in Windows 8 but tried it on a Windows 7 PC and I was able to flash?
Click to expand...
Click to collapse
i dont think its w8 related because on my w7 x64 pc i have the same problem as you but on my laptop also on w7 x64 it works fine and the w7 install was maré with the same dvd on both
i have a similar problem. my pc is not detecting my phone.
any idea how to fix it.? i have tried reinstalling NCS and drivers.
Thanks.
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
freebo21 said:
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
Click to expand...
Click to collapse
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
berrywr said:
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
Click to expand...
Click to collapse
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
freebo21 said:
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
Click to expand...
Click to collapse
What is your Zune version number and OS version?
berrywr said:
What is your Zune version number and OS version?
Click to expand...
Click to collapse
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
freebo21 said:
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
Click to expand...
Click to collapse
What about putting your phone in bootloader mode and will it read USB below when connected to pc?
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
nikola92 said:
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
Click to expand...
Click to collapse
I've inserted a correction here...I restarted by device in bootloader mode and plugged it into my laptop; Zune did not start; however, the letters "USB" do appear in the center-bottom. Rest of post remains the same...You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
berrywr said:
Your phone uses both Zune and WMDC when you are in Bootloader mode. You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
Click to expand...
Click to collapse
I tried on windows 7 pro 64 bit and win 7 home premium. It did not work. In bootloader mode to install the drivers successfully but the Zune does not detect the phone in this mode. Including the phone in normal mode, the driver installation error pops up device not recognized. Zune without the driver does not detect the phone. Previously the phone was detected under the name HTC Titan X310 is now htc eternity.
please help
I have exactly the same problem. Please help: (
vakos8 said:
I have exactly the same problem. Please help: (
Click to expand...
Click to collapse
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
berrywr said:
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
Click to expand...
Click to collapse
Does anyone have any ideas what it could be? Please help solve the problem.
freebo21 said:
Does anyone have any ideas what it could be? Please help solve the problem.
Click to expand...
Click to collapse
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
HTC TITAN
xconomicron said:
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
Click to expand...
Click to collapse
help someone? Zune still does not see the phone. The system can not install the driver why are these problems (it does not recognize the phone)
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
HTC TITAN
AndrewSh said:
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
Click to expand...
Click to collapse
It's not possible. Windows does not recognize the phone. Install different ROM and nothing. Even on a clean TANGO same
+1
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
problem
help someone?
domipasc said:
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
Click to expand...
Click to collapse
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
xconomicron said:
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
Click to expand...
Click to collapse
I've never used the Dynamic ROMs but I can't stand using Zune so I tweaked my registry to make my Titan visible via Windows/File Explorer, I'm curious as to whether any of you with this problem can connect your devices to the developer tools with Windows Phone 7.x for side loading apps.
Hi there
I have seen some posts where users are having difficulty connecting Xperia to their PC or ADB. Therefore, I am writing this guide to help you all.
The guide was prepared using Windows 7 Ultimate but should work with Windows XP and Windows 8.
Firstly, Sony uses a different driver for their Xperia devices and therefore, sometimes you are unable to install drivers for your devices especially for ADB commands.
IF YOU ARE LUCKY
There are few ways to get around to install drivers for your device. The most convenient and easy is you plug in your device and wait for automatic detection of your device. Make sure you have USB connected as MTP in MY XPERIA in SETTINGS of your phone. The device drivers would be automatically installed by Windows update.
METHOD
If suppose you can not install your drivers, connect your xperia and then on your PC, go to My computer > Properties>Device Manager.
You should see an undetected hardware with a yellow exclamation mark over it. Open it and click on update my drivers. Then choose GOOGLE DRIVERS by choosing hard-drive. This should install the drivers for you. If this doesnot work. Try the attachment with the post where the drivers are modified to work with Sony Xperia Devices.
Follow the same steps but this time choose the attachment folder to search for drivers. It might say, the drivers are not verified. Just Ignore it and carry on installing them. You will need to unzip these files.
IF suppose you do not see any exclamation mark while you connect your xperia. Just go to control panel and add new hardware. Select, I will choose my device and then install from hard-disk. Select the folder where you have unzipped the files and you are good to go. The name of new hardware is not important as windows will read the drivers files and install drivers for Xperia.
This will install all drivers for your device. If there are two or more drivers while installing them. Redo the steps and install all of them individually.
Suppose your ADB still doesnot work, then
FOR ADB DRIVERS :
Download the ADB Universal Drivers and connect your device. Then hit install. The ADB drivers will be automatically detected and installed.
Further, if these tricks fail, you can delete the unknown driver from your control panel and then try finding it again by using refresh button(scan for new hardware changes) in device manager.
Another trick is to click on unknown drivers and delete them. Connect your phone to the PC and restart your phone. Then scan for new hardware in device manager. The drivers should be installed for your device.
If still there are some problems, I will try to help you out.
DOWNLOAD LINKS
DOWNLOAD GOOGLE DRIVERS FOR MTP/ PC ETC
https://dl-ssl.google.com//android/repository/latest_usb_driver_windows.zip
DOWNLOAD UNIVERSAL ADB DRIVERS HERE :
http://adbdriver.com/upload/AdbDriverInstaller.exe
Sony Xperia Drivers for ADB.
DOWNLOAD FROM HERE
reserved
it works on win 8.1?
jatinrungta said:
it works on win 8.1?
Click to expand...
Click to collapse
No,I dont know who reads this tutorials anyway wnen there already 10 of them for this particular issue.
Sent from my Xperia U using Tapatalk
XperianPro said:
No,I dont know who reads this tutorials anyway wnen there already 10 of them for this particular issue.
Sent from my Xperia U using Tapatalk
Click to expand...
Click to collapse
true that, thought it would work beacuse it is posted this week
XperianPro said:
No,I dont know who reads this tutorials anyway wnen there already 10 of them for this particular issue.
Sent from my Xperia U using Tapatalk
Click to expand...
Click to collapse
jatinrungta said:
true that, thought it would work beacuse it is posted this week
Click to expand...
Click to collapse
These drivers are seem to work perfectly on Windows 7 and it should work just fine on any other windows!
Hnk1 said:
These drivers are seem to work perfectly on Windows 7 and it should work just fine on any other windows!
Click to expand...
Click to collapse
nope, windows 8+ is different
I'm getting a lot of problems with drivers for this device, seems Sony's guys did it just to say:
"Ok, now this device got some drivers, lets play poker :"
It's serious. To get ADB driver working was a lot of work, just got it working because our friend Ashu1307 posted this link for me ( maybe it can work for ya= http://forum.xda-developers.com/showthread.php?t=2552505)
Ok, that's nice since it was the only driver that's not working on windows 7.
I said windows 7
Now I'm on windows XP, tryied 2 machines already, and this goddam piece of **** don't have any driver working. Nothing, neither MTP, nor fastboot nor ADB nor flashmode (mass storage works, the ones I've quoted are detected, but don't work)
PC companion is another thing I'm hating. First I have to download the Web Installer, 27MB of nothing, since after the download it has to update because the sony's website offers outdated file. THen I download support zone, which detects phone but not the model.
What do I do? I'm going weird just about to break this phone on the wall, I never had so much problems on motorola's or samsung's or enen old sony ericsson's devices.
Before,my PC used to display an error whenever I tried to transfer files from my pc to my Xperia Sola.But after changing the kernel,I could transfer files with ease.So,do you think the problem in the kernel is related to this error?
I never had problem with drivers.
Trying another computer, still having the problems, I use the DoomKernel, do you think it has to do with it ?