My Quattro was previously running on cosmic Rom with philz recovery img but now I switched back to stock Rom but the bootloader is still show the build number different in the bootloader because of which software update download but doesn't install. Pls help me
Aditya78 said:
My Quattro was previously running on cosmic Rom with philz recovery img but now I switched back to stock Rom but the bootloader is still show the build number different in the bootloader because of which software update download but doesn't install. Pls help me
Click to expand...
Click to collapse
did you use odin for flashing stock? flash stock firmware
Yes I did switched to stock Rom through Odin and the phone is working but software update downloads but when the time comes for installation it goes into bootmode and says installation aborted. Could you pls tell me that if I am using a custom Rom that is installed by philz recovery "install zip from ext card " then how to switch back to stock Rom using Odin.
Aditya78 said:
Yes I did switched to stock Rom through Odin and the phone is working but software update downloads but when the time comes for installation it goes into bootmode and says installation aborted. Could you pls tell me that if I am using a custom Rom that is installed by philz recovery "install zip from ext card " then how to switch back to stock Rom using Odin.
Click to expand...
Click to collapse
Update via kies looks like update.zip was corrupted
Related
Installed the GB version of miui with the touch cwm5 recovery(because it kept giving me status 7 error installing the ics version.) When I tried to reboot recovery I landed on a page with a counter just going up(currently at 57k)
What's up with my phone
King Kaze said:
Installed the GB version of miui with the touch cwm5 recovery(because it kept giving me status 7 error installing the ics version.) When I tried to reboot recovery I landed on a page with a counter just going up(currently at 57k)
What's up with my phone
Click to expand...
Click to collapse
Did u make a full wipe before going on another andorid version?
Any other Rom on sd card u can try to flash?
Last option is to flash via Odin and download mode (I think u know what to do, then)
CHEERS
Flash siyah kernel tar file via Odin in download mode.
Sent from my GT-I9100 using xda premium
hi everyone
i flashed stock 4.1.2 DDLS3 firmware via odin. (no root)
I rooted my s2 i9100g by http://forum.xda-developers.com/showthread.php?t=2065581 .
1. flashed SU-BB-Installer.zip for root
2. flashed B_Safe_Kernel_DDLS3_TWRP.zip: for cwm
Done sucessfully.
3. flashed SU-BB-Unstaller.zip for unroot
4. again flashed SU-BB-Installer.zip for root
(last two steps since I want to take it to service center for some speakers problem)
Now I am rooted twrp recovery. But could not install any rom with twrp/temp_cwm. Even i clicked usb debugging but when i connect it to pc it shows only "connected as a media device" no usb debugging connected messege. And I tried to flash stock firmware again via odin--> it showed added then some progress then pass . phone rebooted but no new stock firmware(still with same last system, settings, apps).
Any one please help. root checker apps says rooted successfully.
Hi,
don´t understand you quiet well. If you have this kernel: http://forum.xda-developers.com/showthread.php?t=2293576 then you have a custom recovery and install (flash) new roms via cwm (install zip from...).
Du you flash one-part firmwares via odin? Try after flashing a factory reset in the recovery.
Andi
andi2398 said:
Hi,
don´t understand you quiet well. If you have this kernel: http://forum.xda-developers.com/showthread.php?t=2293576 then you have a custom recovery and install (flash) new roms via cwm (install zip from...).
Du you flash one-part firmwares via odin? Try after flashing a factory reset in the recovery.
Andi
Click to expand...
Click to collapse
Yes I am with the same kernel but whenever i tried to flash a new rom via recovery mod it gives status 7 error and says md5 file not found type thing. I did full data wipe but still same error. I think my USB debugging is not on even I checked it. May it a problem for flashing rom via recovery. I tried to flash again stock DDLS3 firmware via odin, it seems that odin did his work fine(it shows phone added+someprocess+pass) but phone is still with old system.
andi2398 said:
Hi,
Du you flash one-part firmwares via odin? Try after flashing a factory reset in the recovery.
Andi
Click to expand...
Click to collapse
I flashed stock I9100GDDLS3_I9100GODDLS3_INU.zip [India] from http://forum.xda-developers.com/showthread.php?t=2199288
I flashed only firmware no modem,kernel, bootloader etc. Are the others are necessary.
sorry for saying all roms
I can install other roms but MIUI v5 http://forum.xda-developers.com/showthread.php?t=2401232
I tried ICS_xd rom. flashed successful. But getting STSTUS 7 error for miui roms
Any help?
Is there any other way to flash miui rom.
Hi,
Status 7 is a kernel problem, so maybe your kernel isnt compatibl with miui.
Tried this on: http://forum.xda-developers.com/showthread.php?t=1605655 ?
Andi
andi2398 said:
Hi,
Status 7 is a kernel problem, so maybe your kernel isnt compatibl with miui.
Tried this on: http://forum.xda-developers.com/showthread.php?t=1605655 ?
Andi
Click to expand...
Click to collapse
I am with s2 i9100g not i9100. So i think that may not work here. I have asked in miui rom section and they suggest some change in rom.zip file. May be that help. BTW thanks for the help.
done
get solved with xda members help. THANKS A LOT!!!!
Hey guys, I was on temaseks kitkat ROM on v12, I decided to download and flash his new v16 version. I tried to flash it but I got an error saying "some changes failed Error in /sdcard/0/download/cm-11-20131206 Status 7 installation aborted.When I try to reboot my phone it asks to fix my phone root, but when I click yes or no my phone just comes back to cwm. I dont have a sd card, i've tried a factory reset but still no luck
Please help me, I really need to use my phone Thanks
Standard replies to this question .
In recovery format sdcard system data cache .
Boot to download mode flash stock rom .
Or flash stock rom via Odin .
JJEgan said:
Standard replies to this question .
In recovery format sdcard system data cache .
Boot to download mode flash stock rom .
Or flash stock rom via Odin .
Click to expand...
Click to collapse
I managed to flash a stock rom, then flashed cm11 again, but now i'm getting no signal. can you send me a link for the correct modem please?
kLN93 said:
I managed to flash a stock rom, then flashed cm11 again, but now i'm getting no signal. can you send me a link for the correct modem please?
Click to expand...
Click to collapse
I think your system is formatted and there is no OS because of the aborted installtion. I had Status 7 error yesterday because my CWM recovery was outdated. Use latest TWRP from teamw.in and install any rom by copying them in yor sdcard. This should do it.
Hi I have the Galaxy mega 6.3 i9205 rooted using stock firmware a clockwork mod recovery. It failed to install liquidsmooth and now wont boot atall. When I try and install anything from clockwork recovery it says failed to verify whole-file signature as is basically a paperweight now.
any ideas?
iryan1990 said:
Hi I have the Galaxy mega 6.3 i9205 rooted using stock firmware a clockwork mod recovery. It failed to install liquidsmooth and now wont boot atall. When I try and install anything from clockwork recovery it says failed to verify whole-file signature as is basically a paperweight now.
any ideas?
Click to expand...
Click to collapse
Hi..check my post here and flash one of those recoveries from @Silesh.Nair post from his signature as those have kitkat support and are needed to flash these newer custom roms, after flashing one of those recoveries in the download mode with odin (i use odin v3.07) put the UPDATE-SuperSU-v1.93.zip file on your sdcard and flash it with the recovery.
Note: When you flash any one of those recoveries after flashing it you must go directly back into the recovery mode when your phone reboots as if you do not the stock recovery will be installed again..you only have to do this once and after that it will not go back to the stock recovery..try this and see if it gets you back on track.
starmaster10 said:
hi..check my post here and flash one of those recoveries from @silesh.nair post from his signature as those have kitkat support and are needed to flash these newer custom roms, after flashing one of those recoveries in the download mode with odin (i use odin v3.07) put the update-supersu-v1.93.zip file on your sdcard and flash it with the recovery.
Note: When you flash any one of those recoveries after flashing it you must go directly back into the recovery mode when your phone reboots as if you do not the stock recovery will be installed again..you only have to do this once and after that it will not go back to the stock recovery..try this and see if it gets you back on track.
Click to expand...
Click to collapse
thank you so so much!
iryan1990 said:
thank you so so much!
Click to expand...
Click to collapse
You are welcome.
Sent from my SGH-I527M using xda app-developers app
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
chullan88 said:
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
Click to expand...
Click to collapse
At first flash a Samsung firmware through Odin: http://forum.xda-developers.com/showthread.php?t=1424997
I recommend you not using Rom Manager. Have a look at PhilZ's thread for having a safe kernel and custom recovery to be able to backup and flash what you want.
doubt
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
chullan88 said:
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
Click to expand...
Click to collapse
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Primokorn said:
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Click to expand...
Click to collapse
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
chullan88 said:
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
Click to expand...
Click to collapse
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Primokorn said:
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Click to expand...
Click to collapse
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
chullan88 said:
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
Click to expand...
Click to collapse
Yes you can but the most important thing on N7000 is to have a SAFE kernel before wiping or flashing from recovery. (more details in the N7100 sections)
Here are the general instructions to flash a new custom rom:
1. Having root and a working custom recovery (updated)
2. Boot into recovery mode (VOL DOWN + POWER + HOME) then VOL UP to accept the warning.
3. Make a Nandroid backup and backup your EFS.
4. Full wipe: wipe data (factory reset), cache, dalvik and system. Recoveries are different. You may need to go to another menu to format the system partition.
5. Flash rom
6. Flash Gapps
7. Reboot normally