Hello I recently updated my oneplus one to cm12.1 via the ota update. About a week later my mic stopped working. It doesn't work for calls or in apps like Google now or sound recorder. Speaker phone will still work for calls though. I contacted oneplus support and they suggested that I flash oxygen os using the new tool that let's you do it without data loss however I got an error message and was unable to install it.
Does anyone have any ideas on how to fix this issue? I'm not experienced at rooting or unlocking my bootoader or anything like that.
Related
My problem started a few months ago, when I'm calling to someone the another person can't hear me unless I put the speaker on. That is obviously because the phone uses the secondary microphone while on speaker mode. At the start it was on 50% of the phone calls, now it never works. I have GT-I9100
This is what I have already tried:
Factory reset and software update - DID NOT WORK
I replaced the primary microphone - DID NOT WORK
Factory reset without updating - IT WORKED WITH ONE TEST CALL
After the reset I updated the phone - DID NOT WORK ANYMORE
I rooted the phone and installed jaboo kernel - DID NOT WORK
I installed CyanogenMod - DID NOT WORK
I installed stock 4.0.4 Android - DID NOT WORK
I updated to first 4.1.2 Android (I9100XWLSJ) - I WAS ABLE TO MAKE ONE PHONE CALL, DID NOT WORK AFTER THAT
Now I'm sitting with the newest 4.1.2 without working microphone.
Any ideas what to do? I'm starting to be desperate. :/
Dillee- said:
My problem started a few months ago, when I'm calling to someone the another person can't hear me unless I put the speaker on. That is obviously because the phone uses the secondary microphone while on speaker mode. At the start it was on 50% of the phone calls, now it never works. I have GT-I9100
This is what I have already tried:
Factory reset and software update - DID NOT WORK
I replaced the primary microphone - DID NOT WORK
Factory reset without updating - IT WORKED WITH ONE TEST CALL
After the reset I updated the phone - DID NOT WORK ANYMORE
I rooted the phone and installed jaboo kernel - DID NOT WORK
I installed CyanogenMod - DID NOT WORK
I installed stock 4.0.4 Android - DID NOT WORK
I updated to first 4.1.2 Android (I9100XWLSJ) - I WAS ABLE TO MAKE ONE PHONE CALL, DID NOT WORK AFTER THAT
Now I'm sitting with the newest 4.1.2 without working microphone.
Any ideas what to do? I'm starting to be desperate. :/
Click to expand...
Click to collapse
you have hardware issuecontact service centre
Hey,
so I recently got the P9000 and I am very happy with it in General. There is just one big Problem, I am very used to Cyanogenmod on all my devices so I tried installing it in this phone, everything worked fine except for the microphone and the Speaker, Calls go through but I cant talk neither hear anything. Everytime I Start the phone it also says AudioFX was shut down. I also Tried listening to music or any sound for that matter but nothing works. I then installed the Stock ROM and everything works like a charm so I can rule out a Hardware issue. But the Stock ROM is just not cutting it for me in terms oft usability and options and I would much rather switch back to CM. Tried it again yesterday, clean install and everything, Microphone and Speaker are not working.... Does anyone have any ideas how to fix this? Any help greatly appreciated.
Read the Thread
Felino41 said:
Hey,
so I recently got the P9000 and I am very happy with it in General. There is just one big Problem, I am very used to Cyanogenmod on all my devices so I tried installing it in this phone, everything worked fine except for the microphone and the Speaker, Calls go through but I cant talk neither hear anything. Everytime I Start the phone it also says AudioFX was shut down. I also Tried listening to music or any sound for that matter but nothing works. I then installed the Stock ROM and everything works like a charm so I can rule out a Hardware issue. But the Stock ROM is just not cutting it for me in terms oft usability and options and I would much rather switch back to CM. Tried it again yesterday, clean install and everything, Microphone and Speaker are not working.... Does anyone have any ideas how to fix this? Any help greatly appreciated.
Click to expand...
Click to collapse
Flash Final 3... this will work for you.
MaStErB_1984 said:
Flash Final 3... this will work for you.
Click to expand...
Click to collapse
First of all thank you for the tip, in the meantime I installed Android 7 beta to have a look at it. Is there any way to go back to Stock ROM on Android 6 so I can install CM13 Final Build 3? I have tried flashing Recovery and STOCK ROM via SP Flash but it won`t work. I click Download, connect the phone while pressing the Vol+ and it says Downloading, goes up to 100% but the red bar is still there, then nothing happens. Every Flash of Stock or CM Recovery I did before that worked just fine so I guess it has something to do with Android 7. If there is no way I guess I`ll stick with Android 7 for now but I´d rather switch to CM.
There is a way...it has to do with the Android...it changes the preloader and the boot partition. Take this file from deepflex: https://yadi.sk/d/40K4mWLauUddk and flash with sp-tools. Finally flash the TWRP-Recovery from Jonny with flashtools. At the end do a full wipe and install the cm13.1 (Final 3) and the opengaaps.
Got it to work, I used a slightly different approach but right now I am finally installing CM13 Final Build 3, lets see if it works out fine! Thanks again for your help :good::good:
Hello guys,
I am in big trouble after installing Android P DP4. After 1.5 to 2 days of using android P dp4 my earpeace, main speaker and fingerprint stopped working. So, I went back to Oreo AOSCP. same problem there.
So I decided to flash MIUI and flashed MIUI 10 developer version all partitions from fastboot. Same problem there. No Fingerprint, no both speakers.
Plus when I connect phone (MIUI) in PC, It says Pixel XL, Why it is showing Pixel XL after flashing all the partitions??
Now you will say it is hardware problem.
But,
Fingerprint worked when registering while setup in android P. but not working to unlock phone.
Main speaker working when call comes. but not working while playing music (both custom rom and MIUI)
In call earpeace not working anywhere. But I am sure it's software problem. (tried flashing in call fix from GSI thread)
Any solution?
Fix: Automatically fixed.
Hi all,
I have a Lenovo K5 pro, kunlun or L38041.
Last rom that in-call sound worked was last official aosip gsi pie. I installed microg via nanodroid twrp flash, so I'm not sure if that could be related.
Also recently I have restored a twrp backup and I get a qualcom crashdump error, so restored previous backup and everything looked ok, but sim wasn't on this device so until yesterday I couldnt' test calls.
Now in-call audio is not working. I can't hear the other side, and they don't hear me. But call recording records my voice (only my voice and my environment).
I've been trying to restore it since yesterday, I've changed to different gsi roms (aosip fresh, not restored, havoc, and last stock zui), I've done a search, but nothing found.
I don't know how to narrow down where to look or what to do.
Any help is wellcome.
Thanks for your time.
Any help?
https://www.getdroidtips.com/stock-rom-lenovo-k5-pro-firmware/
joke19 said:
https://www.getdroidtips.com/stock-rom-lenovo-k5-pro-firmware/
Click to expand...
Click to collapse
I should mention that I use linux and I haven't any windows close at hand, wich is a prerequisite for QFIL.
Maybe it's time to look for a windows pc over there.
Finally I found a windows pc and in-call audio is back, with qfil as explained in link above.
Hi there
Since I updated my MI A3 to Android 11 the microphone sometimes doesn't record voices !
( I reset and flashed my phone so many times but didn't solve )
Upppppp
If you flashed stock with miflash... Probably the problem is hardware. I have flashed many stock and custom a11 firmware. And my microphone work well. A question. When you reflashed stock rom... You have changed the active slot? All updates are installed on slot b. So if want to make a good clean istallation... In my opinion is better set active slot to a via fastboot before flash. Try this. Also you can try a custom stable rom with oss drivers. But is important to make a good installation. Or the software problems may not be solved
Recently after owning a new car that is my first using Bluetooth handsfree option, I discovered this issue.
It seems the mic got somehow "stuck" to the car when I leave it, as the phone's normal mic then is okay. Just when trying to use the phone's handsfree mic in a call oder video calling in signal or hangouts it doesnt work. Even recording videos using the camera app is fine, but any handsfree option for any communication does not work.
Restarting the device or restarting bluetooth does not work. Somehow the phone recovers after sometime. When, why and how I do not know.
It definitely breaks down again once reconnected to the car.
with other bt devices have same problem?
Sadly I don't have any other bt device that is handsfree mic capable, I just own a speaker that is connected every now and then - it was my first idea to recover it by connecting to another bt device (the said speaker), but it does not work. Of course, the speaker is not connected using the same bt variant, the icon in the phone's settings is different.
mmmm... for this issue, the solution are: try delete all bt connection. if dont work try install latest software update. if dont work the definitive solution is wipe data and make a new clean installation. i suggest do this via miflash
wetito said:
If you flashed stock with miflash... Probably the problem is hardware. I have flashed many stock and custom a11 firmware. And my microphone work well. A question. When you reflashed stock rom... You have changed the active slot? All updates are installed on slot b. So if want to make a good clean istallation... In my opinion is better set active slot to a via fastboot before flash. Try this. Also you can try a custom stable rom with oss drivers. But is important to make a good installation. Or the software problems may not be solved
Click to expand...
Click to collapse
is there a guide to do a good factory reset without unlock the bootloader?
boot into recovery and wipe data