Related
1) download pre8 version here:
http://code.google.com/p/android-wifi-tether/downloads/list
2) start the app the first time to create config files
3) than run:
/data/data/android.tether/bin/tether start 1
4) now open wifi tether app and check logs
Thanks! I will try it and then add it to my rom!
grande suoko !
thanks suoko
sorry, i'm newb..
what do you mean by
"run: /data/data/android.tether/bin/tether start 1" ?
kongkows said:
sorry, i'm newb..
what do you mean by
"run: /data/data/android.tether/bin/tether start 1" ?
Click to expand...
Click to collapse
there's a bug in the gui as always
you must run that command from terminal with root user
i use "better terminal emulator"
I cannot stop it and turn on wifi!!!
???
try "run: /data/data/android.tether/bin/tether stop 1"
Thank you for the method !
Tether Wifi works fine.
But I'm obliged to return the code ("/data/data/android.tether/bin/start tether 1) every time I restart my Tattoo.
It's normal?
Thank you for your help.
Sorry for my bad English, I'm french =p .
Sorry for noob question.
What is wifi tether?
Google is your friend ! =P
Wifi Tether allows use your phone as a router (modem).
Wifi Tether uses the 3G connection, and translates into wifi signal.
I don't know if it's clear, but I'm not very good in English and some words escaped me.
it's clear... i dont need this for now, but is very usable. thx.
I followed the steps but still cannot use tethering
My PC can connect to the Tattoo and get the IP from it, and that app alerted to be connected by a client, but the PC still cannot browse webpage
ww_boy6 said:
I followed the steps but still cannot use tethering
My PC can connect to the Tattoo and get the IP from it, and that app alerted to be connected by a client, but the PC still cannot browse webpage
Click to expand...
Click to collapse
Same here, I tried connecting through a netbook and a iPod Touch, both of them see and connect to the phone, but are unable to use internet.
Same problem
I am using Modaco R2. for HTC tattoo.
I installed wireless_tether_2_0-pre10.apk.
My laptop able to connect to Tattoo & give Ip address.
I tried to browse webpage... but it unable to go into internet.
BUT both, Tattoo & laptop showed that they are connected together!!!
Tattoo's access control even show my laptop's name correctly!
Using laptop command prompt, I tried to ping Default Gateway (192.169.2.100)
It showed 100% data LOST!!!.
What happen???
Download the latest apk (2.0.1), it works.
Hi Guys,
I have an HTC Tattoo and want to do wifi Tethering. My phone is not rooted yet and i cannot find instructions to do this (most of the instructions are for adding new roms). I do not want to add a new rom, i just want to tether my 3G connection by turning my phone into a wifi hub.
phiber123 said:
My phone is not rooted yet and i cannot find instructions to do this
Click to expand...
Click to collapse
Please search this forum before posting.
awesome, it's working.
Wifi Tethering start successfully, but when i try to connect to the network, Tattoo don't assign the ip to the PC and the connection failed.
Wich ip i've to use for gateway and dns? Wich subnet mask?
Thank you
I try to run without root access but not work.
Later on I root my Tatto and app start working with 1.6
Now not have WiFi card to try but when i get one i infform you about res.
USB tethering on froyo works if you need to use the phone's internet on PC. Sometimes, we just need to do it the other way around (lets say the PC doesn't have a wireless card, or we only have ad-hoc networks that are not discoverable without patching) and use our PC's net on android through USB.
Few people have done it using bridges. I did it using squid proxy server on ubuntu.
1.) Install squid and allow http access to all required clients.
2.) Connect the phone with usb tethering on.
3.) Ubuntu detects it as usb0. Now change the ip of usb0 from 'Automatic DHCP' to 'Shared to other computers'.
4.) Fire up the terminal emulator and enter the following.
#su
#netcfg usb0 dhcp
If all went well, you should now be able to connect to the internet.
Tried it and it's not working for me...
Or maybe i didn't setup squid right.
I'm not so good on ubuntu OS
I tried making a bridge connection on windows...the networks
The network seems to be connected but no internet connection...
Is it necessary to have Ubuntu OS?
Maybe some another how-to will help:
http://forum.xda-developers.com/showthread.php?t=793102
To setup squid to work:
type in:
sudo gedit /etc/squid/squid.conf
In that file find the section called
# ACCESS CONTROLS
Under the section find the line
#Recommended minimum configuration:
and add this line next to it
acl all src all
then find the section
# TAG: http_access
Under this section find the line
#Default:
and add the following line to look like
#Default:
http_access allow all
Close the file and restart squid as:
sudo start squid
That should setup squid to share your internet on all clients.
If required, reboot.
You can try out a similar approach on any other distro other than ubuntu.
i tried several searches about this topic, but none of them succeeded,
any update on this?
can i install ubuntu in my Win7?
syruz said:
can i install ubuntu in my Win7?
Click to expand...
Click to collapse
Well, you can virtualize it in Virtual box. It's free for personal use.
by the way what is the squid your talking about?
@ TS
maybe you can provide us with the link for ubuntu and squid?
Come on.. if you don't already know what ubuntu and squid are there's no point in trying this.
Ubuntu = Linux, that's another operating system. Squid is a proxy.
You ashould at least have the decency of Googling those for yourself..
Sent from my LG-P500 using XDA App
harshaxdadevelopers said:
USB tethering on froyo works if you need to use the phone's internet on PC. Sometimes, we just need to do it the other way around (lets say the PC doesn't have a wireless card, or we only have ad-hoc networks that are not discoverable without patching) and use our PC's net on android through USB.
Few people have done it using bridges. I did it using squid proxy server on ubuntu.
1.) Install squid and allow http access to all required clients.
2.) Connect the phone with usb tethering on.
3.) Ubuntu detects it as usb0. Now change the ip of usb0 from 'Automatic DHCP' to 'Shared to other computers'.
4.) Fire up the terminal emulator and enter the following.
#su
#netcfg usb0 dhcp
If all went well, you should now be able to connect to the internet.
Click to expand...
Click to collapse
Hi guys,
Do you know why I wouldn't be able to see "USB tethering" option? No matter what I did so far, all I can see is the "Portable Wi-Fi hotspot" option and that works fine. But I need to use the USB Tethering!!!
Thanks for the help!
If someone is having the same problem as me (ie usb tethering mode not visible) just use a program called togglesettings lite. It can turn on the usb tethering for you. Now the reverse usb tethering works for me like a charm. Peace!
Sent from my LG-P500 using XDA App
harshaxdadevelopers said:
USB tethering on froyo works if you need to use the phone's internet on PC. Sometimes, we just need to do it the other way around (lets say the PC doesn't have a wireless card, or we only have ad-hoc networks that are not discoverable without patching) and use our PC's net on android through USB.
Few people have done it using bridges. I did it using squid proxy server on ubuntu.
1.) Install squid and allow http access to all required clients.
2.) Connect the phone with usb tethering on.
3.) Ubuntu detects it as usb0. Now change the ip of usb0 from 'Automatic DHCP' to 'Shared to other computers'.
4.) Fire up the terminal emulator and enter the following.
#su
#netcfg usb0 dhcp
If all went well, you should now be able to connect to the internet.
Click to expand...
Click to collapse
Thank you for sharing this trick. But i dont have netcfg utility, since i use ubuntu maverick 10.10, it is not in source list. is ther any other way to do "netcfg usb0 dhcp"?
This is by far the easiest solution I've found to reverse tether. Thanks!
jadeiceman said:
This is by far the easiest solution I've found to reverse tether. Thanks!
Click to expand...
Click to collapse
Sorry and wich is the solution ????
syruz said:
@ TS
maybe you can provide us with the link for ubuntu and squid?
Click to expand...
Click to collapse
sudo apt-get install squid
This should install squid.
netcfg is not there on recent ubuntu versions not even software list but you can configure via app indicator at right but still i can't use reverse tethering although i followed you pretty well.
netcfg is a utlility on the phone... u need to run that command at the terminal of the phone not on your computer. (get a terminal emulator from the market)
Wow I'm feeling stupid.Will give it a go now.
Hello, I'm trying to access my UrukDroid 1.6RC2 from a Win7 desktop.
Samba is disabled in the UrukConfig and when I turn it on it just gives error. However the one time I did get to to work was when I had it turned off and used the Samba app that was included with UrukDroid. By just enabling it I managed to get some files across from the Win7. I tried enabling a custom pass but that proved useless seeing I was able to just access the share without needing one.
Reset that, then gave up on it for a few days then tonight I tried the same thing and somehow the share doesn't show up under Network in Win7 so no way to even access it...
Anyone have any answers or advice? This is a shame cause I love me some Samba.
well im not sure waht urukconfig is doing for samba.
But if u wanna know how to start:
U can ALWAYS setup each service manualy without UrukConf.
To get started - read the sama man pages - or some general linux samba howto - its anolog to the android versions...
Anywy if u just want to figure out what's wrong with the urkukconfig-samba - start a terminal-session on your archos (or use ssh from win7) and browse to /etc/uruk.conf and /etc/uruk.d wich hold the configuration and the startup files for the UD services.
To debug simplay run the samba script in /etc/uruk.d/ and check for the error output
if u don't knwo what the error means - report it here - or even better: use google
good luck
It's there a way to access my phones files without it being connected to my WiFi network? Maybe an app that can run as a service?
Sent from my overclocked LG G2x
Currently NO, there isn't any Service or App yet that can do such thing !
yes it IS POSSIBLE - since the beginning of android
try Termux with sshd ( openssh ) - free on the PlayStore
if you don't want to, just root it, setup buisybox and make a reverse Tunnel over SSH
you can read everything about that when you search on google for "autossh linux setup"
you do the same, but without AutoSSH
if you dont want to do this, you can make yourself an openVPN server and connect your phone to it - thats pretty easy . then just use SSHDroid or Termux to set up an SSH server - After you have done this, connect your PC to the VPN network and ssh into the phone - if you dont want to connect your pc to the server , shh throuch ssh to the phone from the server
you don't need to rent a server yourself - if you run linux just install opennssh and run sshd and forward your ports. If you are on Windows, idk just google
I use this technique since 2011 to remotly controll my phone with an internal meterpreter session - so i can wipe everything or spy the guy who stole my phone when its lost
GL
hope it helped - if you aren't too techy its maybe a little hard
I want to control my android device loaded with lineageos 8.1 remotely from my laptop from the browser. I have tried airdroid, but i am not able to use the remote control feature when i am offline, it only works over the internet, is there any fix for this? also please suggest any alternatives. I have root access using magisk.
motolora 1656565 said:
I want to control my android device loaded with lineageos 8.1 remotely from my laptop from the browser. I have tried airdroid, but i am not able to use the remote control feature when i am offline, it only works over the internet, is there any fix for this? also please suggest any alternatives. I have root access using magisk.
Click to expand...
Click to collapse
Definitely want to be using scrcpy. It uses adb as it's connection method. So if you can wifi adb to your devices you can remote control it.
If you need sound, it gets slightly more cumbersome. But sndcpy works well in tangent.
Astoras said:
So if you can wifi adb to your devices you can remote control it.
Click to expand...
Click to collapse
Please guide me how can I do this. I have enabled TCP/ip mode in developer menu.
motolora 1656565 said:
Please guide me how can I do this. I have enabled TCP/ip mode in developer menu.
Click to expand...
Click to collapse
Some phones have an option in Developer settings. It normally explicitly says wifi adb. If you don't have the option, you'll need a root app or elevated terminal to activate it.
The app is faster to use if in a normal context.
Find on on the playstore. Just search wifi adb.
Then on your computers terminal, which has adb installed properly, type "adb connect {your phone's ip address}"
Once it successfully prompts and you accept the connection on your phone you are ready to use scrcpy.
You can find tutorials on how to install both adb and scrcpy.
But the most user friendly, if on widows, is to first install a repository called Choco. Again, look up how to do so.
Then, simply type these commends in an administrative PowerShell:
choco install adb -y
choco install scrcpy -y
If all of this seems overly complicated. It is a one time setup. And all of these tools are excellent to have in the future if you are into Android and software.
After these steps are completed, rember you first have to establish an adb connection and then type scrcpy into your terminal.
Ok, Thanks a lot!!!!
motolora 1656565 said:
Ok, Thanks a lot!!!!
Click to expand...
Click to collapse
- Download scrcpy.zip
- Unzip to the dir of your choice
- On your phone: Developer settings --> Enable USB Debugging
- Connect with a cable
- Run scrcpy-noconsole.vbs
Should work (also for android 12)
If you want to use this over IP, let us know
biontx said:
- Download scrcpy.zip
- Unzip to the dir of your choice
- On your phone: Developer settings --> Enable USB Debugging
- Connect with a cable
- Run scrcpy-noconsole.vbs
Should work (also for android 12)
If you want to use this over IP, let us know
Click to expand...
Click to collapse
Oeps, the previous scrcpy.zip contains convctctytdl.exe ... you won't need this:
This is used to convert all youtube files (movie, list, etc...) to mp3
You can delete this file
This is the windows x64 version
You don't need internet as your phone is connected with a cable
Thank you everyone for your help!!!
Scrcpy is successfully installed and is working fine!!!
I took help from this forum and the official GitHub repo https://github.com/Genymobile/scrcpy
Thanks everyone
i have another request, please help!
capture mobile display as a "live video file"