Related
hi all
Forgot to charge my EVO 3D (CDMA) and battery completely drained. Even after using another fully charged battery my phone goes to bootloop - just shows the HTC logo and reboots again and again. Here is what I have:
hboot : 1.5 (S-ON)
radio : 1.06.00.1216
ota : 2_17.651_5
(I am using this phone in India activated on Reliance)
As the phone doesn't boot I can't access it thru adb to give command 'adb reboot bootloader'
I can get bootloader by pressing vol_down+power
When I run the 2_17.651_5 RUU (exe) from my computer while phone is on fastboot, it completes successfully without errors. But still on reboot it just stays at the htc screen and reboots (guess it's becoz stock kernel not getting flashed as the phone is s-on)
kindly help to get back my phone boot again
thanks and regards
ananth
R.I.P
Sent from my HTC.EVO.3D.Xda Premium
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
jdeoxys said:
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
Click to expand...
Click to collapse
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
ananth001 said:
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
Click to expand...
Click to collapse
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Sent from my PG86100 using Tapatalk
megabiteg said:
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Click to expand...
Click to collapse
thanks. extracted boot.img from freeza's kernel and flashed from fastboot after unlocking. But still doesnt solve problem. Can you give me a link for boot.img
Pleassssssse HELP !!!!!!
I have the exactly the same problem, a full reboot result in boot loop, and can not fix it by now.
I guest the phone is rooted before OTA, so OTA can not flash kernel successfully because the wrong signature, and the phone will not boot because the wrong kernel.
I have tried ruu, fastboot boot recovery.img and etc, all failed.
The key point is that, the phone is rooted and you tried OTA. HTC OTA must have a stupid bug, it can not recovery from a partial update, or automatically roll back becasuse of the partial update, dem!
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
ananth001 said:
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
Click to expand...
Click to collapse
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I wonder the same thing all I saw was 1.5
Sent from my PG86100 using xda premium
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Reliance has both CDMA as well as GSM service in India. Mine is a Reliance CDMA MDN.
thanks and regards
reaper24 said:
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Click to expand...
Click to collapse
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
ananth001 said:
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
Click to expand...
Click to collapse
Have you tried to just run the RUU like you said boot turn debug on .... Then go to hboot flash your recovery...
Then fastboot boot recovery.img.
This should work I have unrooted my phone 3 times already in the past month Trial and Error on my part adb always found my phone...
I am tryin to figure out what is going wrong on the last part with TWRP...
Since you said after you do that it was a no go? What happend ? Adb should still be working since you just flashed the recovery...
Anyways I hope you get it solved man I am tryin to figure this problem out.
Do you have a rom already ready to be flashed on your SD card?
Problem is, since i’m not able to android boot I can't reboot bootloader from adb, as I can't connect adb without the phone normal booting. When I boot it just stays at the HTC white screen.
I have flashed twrp recovery from fastboot, but when I give command 'fastboot boot <twrpxxxxx>.img it just boots back to the HTC splash screen
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Android Cowboy said:
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Click to expand...
Click to collapse
As I mentioned in earlier post, have tried flashing PG86IMG.zip from bootloader, but still phone doesn't boot properly and is in a bootloop.
You've used the following file and done these exact steps and allowed the phone to boot to full stock OS? (assuming 2.17.651.5 is correct version)
OPTION 2 - RUU.zip info:
I prefer the .exe version but xHausx’s “FULL” PG86IMG_2.17.651.5.zip may work for you (must be renamed PG86IMG.zip). Make sure you have plenty of battery/charge left!
- (XDA) Xhausx full PG86IMG.zip RUU images (651.5 zips)
PG86IMG_2.17.651.5.zip http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564
MD5: 8F82C2D8F98C077AF775266064BACB5D
From Scrosler's zip Directions : http://forums.androidcentral.com/htc-evo-3d-rooting-roms-hacks/107641-how-return-100-stock-all-versions.html
Scrosler; said:
USE ONLY FOR EMERGENCY PURPOSES. THIS OVERWRITES EVERYTHING!!!!
**THIS WILL RETURN YOU TO FRESH OUT OF THE BOX**
You will not need any special drivers loaded, etc...
1.Download the stock ROM ZIP image from here: and rename it "PG86IMG.zip"
2.Copy it to SD Card
3.Reboot phone into hboot mode by holding volume down and then press power.
Keep volume down held until you boot into hboot mode.
4.In hboot mode the phone will scan the SD card with the image. Once it finds it will ask you if you want to update. Press "Power" to update.
5.Wait.... For a while. When it gets to "system" it will loop a few times. Its quite nerve wracking actually but after about 5 or 6 times it will complete.
6.Once the entire flash is complete it will prompt you to "press power to reboot." Press power and your phone will reboot to 100% stock ROM.
Click to expand...
Click to collapse
Hello, I am unable to get into recovery or in my rom. I can getting into the bootloader, but cannot get into recovery. I am on 1.50 HBOOT and phone is unlocked. I would like to get back to stock so I can do an OTA update. Any help would be great, please let me know if you need more information.
XcsaS said:
Hello, I am unable to get into recovery or in my rom. I can getting into the bootloader, but cannot get into recovery. I am on 1.50 HBOOT and phone is unlocked. I would like to get back to stock so I can do an OTA update. Any help would be great, please let me know if you need more information.
Click to expand...
Click to collapse
What happend to your recovery? Also you need to fastboot oem lock while in hboot using adb
If you wanna go stock you will need the RUU exe you can find this in footballs post in the dev section...
reaper24 said:
What happend to your recovery? Also you need to fastboot oem lock while in hboot using adb
If you wanna go stock you will need the RUU exe you can find this in footballs post in the dev section...
Click to expand...
Click to collapse
not sure what happened with recovery, just wouldn't boot. will I be able to use the RUU exe while in fastboot?
XcsaS said:
Hello, I am unable to get into recovery or in my rom. I can getting into the bootloader, but cannot get into recovery. I am on 1.50 HBOOT and phone is unlocked. I would like to get back to stock so I can do an OTA update. Any help would be great, please let me know if you need more information.
Click to expand...
Click to collapse
if you have a copy of your boot.img and/or your recovery.img file flash that through your fastboot usb screen and reboot you should be ok pending your /system and /data partitioms are ok... if not follow the rest....
ok im goignt to guess youre new to flashing and the android development... but first thing is first... download the stock recovery zip on the other listed thread and rename it PG86IMG.zip... then reboot into your hboot/bootloader.... this will install a stock rom and recovery AFTER that you must reboot then shut down and reboot into your hboot again and from there go to fastboot and plug in the usb cable so your prompt says fastboot usb and then relock your boot loaderafter that finishes reboot again to the ROM and then run your updates... after you get the updates you want you can unlock again and then reinstall superuser and proceed as you want....
wloftus said:
if you have a copy of your boot.img and/or your recovery.img file flash that through your fastboot usb screen and reboot you should be ok pending your /system and /data partitioms are ok... if not follow the rest....
ok im goignt to guess youre new to flashing and the android development... but first thing is first... download the stock recovery zip on the other listed thread and rename it PG86IMG.zip... then reboot into your hboot/bootloader.... this will install a stock rom and recovery AFTER that you must reboot then shut down and reboot into your hboot again and from there go to fastboot and plug in the usb cable so your prompt says fastboot usb and then relock your boot loaderafter that finishes reboot again to the ROM and then run your updates... after you get the updates you want you can unlock again and then reinstall superuser and proceed as you want....
Click to expand...
Click to collapse
Ok following your instructions I downloaded the RUU (two of them infact) changed the name to PG86IMG.zip, when booting into the bootloader, it starts checking the PG86IMG.zip file, there is a blue status bar on the top right, when it fills completely in, it just starting checking the SD card for files again, and then goes back to the normal bootloader screen with options to select fastboot, factory reset, etc... Is there something I missed? I believe there should be some more options.
EDIT: the football post http://forum.xda-developers.com/showthread.php?t=1334473 only goes to .exe files, I had downloaded a .zip file from a different source with the same name, Should I have changed the .exe to PG86IMG.zip?
After using the command flashboot oem lock
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 66977136 (0x3FDFD70)
FAILED (status read failed (Too many links))
finished. total time: 0.937s
Now showing
*** RELOCKED ***
*** Security Warning ***
XcsaS said:
Ok following your instructions I downloaded the RUU (two of them infact) changed the name to PG86IMG.zip, when booting into the bootloader, it starts checking the PG86IMG.zip file, there is a blue status bar on the top right, when it fills completely in, it just starting checking the SD card for files again, and then goes back to the normal bootloader screen with options to select fastboot, factory reset, etc... Is there something I missed? I believe there should be some more options.
EDIT: the football post http://forum.xda-developers.com/showthread.php?t=1334473 only goes to .exe files, I had downloaded a .zip file from a different source with the same name, Should I have changed the .exe to PG86IMG.zip?
Click to expand...
Click to collapse
no...do not install the exe file at all.... the zip file if it is a trusted source should work...after it loads the files it finishes booting into the hboot screen...from there you can boot into the rom to verify that there is no superuser program and then power down and boot into your hboot again and relock your bootloader then reboot to the rom and update....when you boot back into the rom after installing the zip file it should look like the way it was when you first got it...if not you may have the wrong zip file
Ok I found out there was a zip on that page, I will download that and see where I get. Thank you so much for the help so far.
Ok issue is solved. I guess I needed to be relocked before I could update with PG86IMG.zip. So I guess in the future make sure you are not rooted when trying to update
I've been trying everything I could find to root my wife's HTC Rhyme and nothing works. I tried flashing a custom RUU and now it won't boot. It just hangs at the white HTC screen. Now, I can only get to the bootloader.
The only thing that I've been able to do successfully is unlock/relock the bootloader. This is my wife's phone and I really want to root it so that she can have the benefit of being able to completely backup everything. However, at this point, I just want to get the damn phone to work again.
PLEASE... Any help would be greatly appreciated.
Thanks!
I'm still working on this. I'm finding a few hits on Google for this kind of issue but nothing seems to be working.
Please... anyone with any input at all would be helpful.
Thanks.
Boot into fastboot and run your device's RUU from your PC.
Hi... I tried to run the RUU application from my PC several time but it always fails with an error message saying that the "WRONG BOOTLOADER VERSION".
Thanks for your reply anyway.
********** UPDATE **********
I got it to boot-up normally.
I used the method explained here to extract the boot.img file and flashed it in fastboot.
I still have no recovery though. I really want to root this phone or at least get a recovery on it that I can create nandroid back-ups with.
RuLEoF2 said:
Hi... I tried to run the RUU application from my PC several time but it always fails with an error message saying that the "WRONG BOOTLOADER VERSION".
Thanks for your reply anyway.
********** UPDATE **********
I got it to boot-up normally.
I used the method explained here to extract the boot.img file and flashed it in fastboot.
I still have no recovery though. I really want to root this phone or at least get a recovery on it that I can create nandroid back-ups with.
Click to expand...
Click to collapse
If you have S-OFF, you should be able to flash CWM and root your device.
Problem fixed.
I was able to extract the stock recovery and boot image from the RUU application and flash them from fastboot.
Recovery is back and it's booting normally again.
RuLEoF2 said:
Problem fixed.
I was able to extract the stock recovery and boot image from the RUU application and flash them from fastboot.
Recovery is back and it's booting normally again.
Click to expand...
Click to collapse
plx tell me step by step my htc rhyme is bricked and the phone cmpltly dead plx help me
I was on 4.0.3 and I flashed the zip through AromRa recovery.
Now, when booting up, its stuck at the 4G screen.
The update was the OTA update released to update radios to Global. THIS
It didn't gave any error at all, it said "Reboot to complete installation or update". But when I clicked the reboot option, I saw a line saying something like "Can't write....." then the screen went off and it rebooted. This line was not there, or atleast not visible before I clicked the reboot option.
I am new to rezound and android, so please let me know what I can do. I wasn't able to get a nandroid backup before doing this, had no ext. SD card.
All I did before flashing the zip was flashing the custom recovery. Nothing else. No SU or anything else.
Can I RUU 4.0.3 to fix this problem?
Yes you need to ruu to get it back. I'm assuming your s on. You need to be s off in order to flash radios by themselves.
Sent from my ADR6425LVW using xda app-developers app
Yes, I am s-on and not rooted.
Is there any specific RUU that I should go to? I was thinking of using 4.03.605.2
Thanks
lamborg said:
Yes, I am s-on and not rooted.
Is there any specific RUU that I should go to? I was thinking of using 4.03.605.2
Thanks
Click to expand...
Click to collapse
Yes, that's the latest global RUU.
You need to relock to run it:
fastboot oem lock
Put it on your sd card and it should do it's thing when you reboot. Run it a couple times and make sure it's finished so it will get all the system files. I believe it reboots you once it's done.
Then you can unlock again, flash recovery and root. If you have trouble rooting again search this forum for "super su" and you'll find a version you can flash to gain root.
feralicious said:
Yes, that's the latest global RUU.
You need to relock to run it:
fastboot oem lock
Put it on your sd card and it should do it's thing when you reboot. Run it a couple times and make sure it's finished so it will get all the system files. I believe it reboots you once it's done.
Then you can unlock again, flash recovery and root. If you have trouble rooting again search this forum for "super su" and you'll find a version you can flash to gain root.
Click to expand...
Click to collapse
I relocked but then tried flashing the zip twice.
Here's what comes in cmd:
sending....
OKAY
writing
<bootloader>adopting sig ....
<bootloader>checking sig
failed <remote: not allowed>
finished
After rebooting, it gets stuck on the white HTC screen.
sounds like a bad download, go back to android police and try to get the mirror from Illinois, it worked for me a couple of weeks ago after having the same issue as you.
sent from my rooted SAMSUNG GALAXY NOTE 2...
mike7728 said:
sounds like a bad download, go back to android police and try to get the mirror from Illinois, it worked for me a couple of weeks ago after having the same issue as you.
sent from my rooted SAMSUNG GALAXY NOTE 2...
Click to expand...
Click to collapse
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
lamborg said:
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
Click to expand...
Click to collapse
You have to fastboot oem rebootRUU first
then fastboot flash zip PH98IMG.zip
you may have to flash the zip twice.
Code:
androidforums.com/incredible-all-things-root/487280-easier-way-flash-pb31img-files.html
(I can't link yet)
lamborg said:
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
Click to expand...
Click to collapse
You don't flash this in fastboot since it's a zip file.
EDIT: Looks like you can flash in fastboot as mentioned in the above post. Cool, I like that. I would flash it twice as I've read several times that you need to to make sure it gets all the system files.
If htat doesn't work for whatever reason, just put it on the sd card of your phone, detach your phone from your pc and reboot. hboot should find it (it looks for the PH98IMG.zip file) and flash it. Flash it twice to be sure it gets all the system files.
When it's done and you're rebooted use a file explorer and delete the PH98IMG file so it doesn't flash again on the next reboot.
I have no os on my phone anymore, i have no idea where to even start. Ive been searching and searching forever now.
S-On
Hboot- 2.28
No Backup and Non-Root as well
Bootloader Unlocked
Is there anything i can do? I know the Hboot 2.28 RUU hasnt came out yet that i know of and researched of as well....Thanks in advance!
Your fine, did you just wipe everything or re-did the ruu?
If your did the ruu than you need to get your recovery back in your phone
If you just wiped everything in recovery than you need to download the ROM you want to use than install the zip in recovery but don't boot into it yet. Pull the battery and boot into bootloader and go into fastboot. Than on your PC take the boot.img file out of the ROM zip you just installed and flash it over ADB.
Fastboot flash boot boot.img
If you need any more help or questions I can continue to help or others will pop in
Edit: IF your trying to get back to just stock than you need to ruu again http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
You need to have a locked bootloader when flashing the ruu,
After downloading the file, rename it to "PH98IMG.zip" (no quotes)
Place the renamed file onto the root of the SD Card
Than boot into bootloader and it should load it up and install it, make sure to just leave it be. The phone might turn off than back on by itself once during the installation and that's normal, it'll continue installing and it will let you know when its finished
Sent from my ADR6425LVW using xda app-developers app
Add a rom zip file to your external sd card via your computer. And install it via yiur custom recovery. If for some reason you don't have a custom recovery, use Odin to go back to stock.
sent from a small tablet aka N2
Ok ive got a ROM installed but every time i try to flash the Boot.img it says "Failed (data transfer failure)"