SU binary update stuck at reboot - Galaxy S III Q&A, Help & Troubleshooting

I know this is a known issue, but the thing is that most solutions i have found regard looking into the phone's settings.
The thing is I can't even boot my phone any more. The moment I get the Galaxy SIII GTI9300 logo the phone simply freezes there forever.
It's been like hours like this. I even tried removing the battery for half an hour and put it back. It just won't boot any more.
I didn't install a custom ROm after rooting, the phone was freshly rooted and didn't got to that step yet.
I rooted the device by using the toolkit http://forum.xda-developers.com/gal...msung-galaxy-s3-unified-toolkit-v8-0-t1703488
which surprisingly worked pretty fast and I was able to confirm that my phoen was rooted by installing a root-only app (Root Uninstaller)
then i got a message asking me to update the SU binary and when i accepted the update the phoen restarted never to boot again.
I didn't even get the chance to get the ClockworkMod yet.
Now I don't even have ClockworkMod's menu at the beginning, i have nothing. only the classic boot mode that allows me to download software via Odin (which always fails no matter what package I try)
please help me, i have no other device than that right now....

Download-Mode
Hello and good morning,
have you tried to boot into download mode ?
It's the same like s3

Take the battery out for a few seconds . put it back in and boot into download mode again and it should work

Related

Unable to boot to Recovery Mode GS3

Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
cugami said:
Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
Click to expand...
Click to collapse
GO here : http://forum.xda-developers.com/showthread.php?t=1993044

[Q] Help needed: galaxy young stuck in cwm loop

Hi all,
I need some help please.
I tried to root my sons galaxy young S6310N using a video on you tube
However at the 4.41 point I didnt have the yes- root option.
I themn rebooted and it went back into CWM recovery. v6.0.3.2
It's been stuck in this for 2 days now, I have searched everywhere for a solution but I'm lost now. I have information overload I think.
I have tried to install drivers through Kies but it won't recognise my phone in CWM recovery or in download mode.
I have tried to install a custom rom via sd card, it seems to work but reboots into CWM again.
I fear I may have made a mess of it now by messing around with things I know nothing about. I panicked really.
The phone was running jelly bean and is only a week old.
I can get adb but not sure how to use it properly.
Could someone please help?
Thanks in advance
sorted it myself
Hi, just in case anyone was interested I managed to sort this.
I put phone into download mode (holding vol - & menu & power) then pressed up at logo screen to enter download mode.
My pc then installed drivers automatically (something I had been struggling with in CWM recovery mode)
I then installed stock rom recovery.tar.md5 file using odin and the phone rebooted as normal.
I have given up trying to root it now, I may learn properly before attempting again, or may leave it.
Search for your device first before making a thread..!!
driller66 said:
Hi, just in case anyone was interested I managed to sort this.
I put phone into download mode (holding vol - & menu & power) then pressed up at logo screen to enter download mode.
My pc then installed drivers automatically (something I had been struggling with in CWM recovery mode)
I then installed stock rom recovery.tar.md5 file using odin and the phone rebooted as normal.
I have given up trying to root it now, I may learn properly before attempting again, or may leave it.
Click to expand...
Click to collapse
Good..but always use recovery for ur phone only..or make it for ur phone..
And do any changes in stock ROM after creating a BACKUP of the same..
ROOTING is not a difficult now-a-days but overcoming from the loss of time and data after BRICKING is so painful.
If you are not friendly with the commands and codes then use a software for that or follow up the WRITTEN guide..or use FARMAROOT app.
Head to thread...Thanks Mr. Bin4ry for this awesome method:
Rooting almost every phone
Enjoy..!!

[Q] softbricked htc desire 601 zara

2 days ago my phone went from running perfectly to turning off and getting stuck in a boot loop, I'm assuming it had something to do with supersu updating because i noticed a popup about the binaries needing updating before the crash. I couldn't load recovery (would show team win logo then reboot) but i could load safe mode, i tried downgrading to lower versions of su ( i tried 2.13, 1.8 and 2.01) but that didn't work my phone would boot normally, i could access it for about a minute then it would reboot and do it all over again. i had originally followed this guide (URL at the bottom as i can't post links) so last night i attempted to just re do it all following the same guide. I got the recovery mode to boot and wiped the cache but i still had the same issue where i could access my phone for a minute before crashing. Now when i try to enter recovery it shows the htc logo and immediately reopens boot loader on the fast boot option. I rurally don't want to go out and buy a new phone so any help is appreciated. My current PC access is fairly limited but i can use one if i have to.
Also when i launched safe mode i noticed id get an error report after a few minutes, not sure if thats relevant but it never showed up when i booted normally.
android forums(.)com/desire-601-all-things-root/817068-root-unlock-bootlader-install-recovery-guide-htc-desire-601-zara.html
(remove the brackets)
*edit* i have tried searching for similar threads but i think i will have a better result if the replies are directed towards me directly
Thats weird. Ive never seen this issue before
Try this steps : http://forum.xda-developers.com/and...1-zaraul-s-t2893035/post56365857#post56365857
It works for me.

Nearly softbricked my S6 edge, f.... up from time to time

Hi
Rooted my S6, and threw TWRP recovery on, put a "sixperience S7" rom on it, at first it worked flawlessly, but since I didnt make a factory reset i pulled one later, thats when my problems started.
Installs fine, reboots and the initial start and setup goes fine, but when the screen turns off and i wake it up again, the screen looked like a pc screen with no gfx driver, funky colors and very dark - tried two times to make a clean install, same happened
Tried to install stock rom with Odin, failed, tried 3-4 times, fails
Then i went into TWRP and deleted all......but seriously all......coudnt boot into anything then, not even download mode, got the message on the screen that "something went wrong in updating the firmware, try the emergency recovery with Samsung Smart Switch" That of course couldnt connect to the phone, when i finally got it to be recognized by the computer, my phone wasn't supported by the program (because it is rooted i read somewhere)
After an hour with a lot of swearing and crying almost, I tried to connect it to Odin and i got connected, installed a new TWRP and i got it into recovery where i could install a new rom, and the phone booted again
Heres my question, when i put it into download mode (tried to install stock rom with Odin once more) then I cannot boot it again, I have to install TWRP and a new rom before I can get it up and running again, is there any possibility to get a stock rom installed ever again?

Galaxy J5 bricked and home button broken

I ran into a serious problem and now I do not know how to fix it. It turns out that I wanted to install a rom to my cell phone, since the stock I had was giving problems with the battery indicator, and I tried to calibrate it and even used others also following different steps to calibrate them, but always the same problem; Well, after root I found the problem that I could not install anything from the recovery mode of the cell phone, there was a problem that was disabled and could not from the sd, or internal, or adb or anything. Finally I decided to find an application to install twrp and flash the rom, downloaded flashify and I did.
When I went into recovery to flash the rom the cell phone did not change the logo with the message in a corner that is not the official recovery as always comes out when a custom is installed. And there it stays.
I can not turn it on normally, because each time I turn it on it goes directly to the logo with the message that it is not the original recovery, as if trying to access the recovery.
PS: I can not use odin, it does not recognize the cell phone when it is in odin mode, since all the drivers are installed and the kies, I reinstalled everything 3 times every time I tried it. And I can not enter odin mode, and the home button does not work, I used adb, but since it does not turn on, it does not recognize it either.
alberto1251 said:
I ran into a serious problem and now I do not know how to fix it. It turns out that I wanted to install a rom to my cell phone, since the stock I had was giving problems with the battery indicator, and I tried to calibrate it and even used others also following different steps to calibrate them, but always the same problem; Well, after root I found the problem that I could not install anything from the recovery mode of the cell phone, there was a problem that was disabled and could not from the sd, or internal, or adb or anything. Finally I decided to find an application to install twrp and flash the rom, downloaded flashify and I did.
When I went into recovery to flash the rom the cell phone did not change the logo with the message in a corner that is not the official recovery as always comes out when a custom is installed. And there it stays.
I can not turn it on normally, because each time I turn it on it goes directly to the logo with the message that it is not the original recovery, as if trying to access the recovery.
PS: I can not use odin, it does not recognize the cell phone when it is in odin mode, since all the drivers are installed and the kies, I reinstalled everything 3 times every time I tried it. And I can not enter odin mode, and the home button does not work, I used adb, but since it does not turn on, it does not recognize it either.
Click to expand...
Click to collapse
To enter in to the download mode you can use JIG USB which looks like this :
https://images-na.ssl-images-amazon.com/images/I/41MhETGCbBL.jpg
You can buy that jig USB on E-Bay
or you can use this tool but little Warning !!!
https://app.box.com/s/ktb9rzxde78lujqioh3rbmh6w39gedmm
File was scanned against viruses and it has some , maybe because like that he make your device in download mode.
https://www.virustotal.com/sr/file/...33ff7dceef468c2e8c325d79c7ad43fc8c1/analysis/
Here is video how to use .
https://www.youtube.com/watch?v=2er95HkiJbo
Good Luck
I'll try with the usb jig. Still don't know if buy the resistance and make one or just buy the jig. Then i will see if i can get for odin to detect the phone, using some kind of witchcraft or whatever hahahaha.
Thanks, I will set the thread as solved.
Good Luck

Categories

Resources