Hello all,
I purchased Samsung Galaxy s6 edge off of craigslist in attempt to repair this software issue.
It is verizon USA version model G925V
The phone powers up and Samsung screen comes up and it says Custom in the middle with an unlock sign which means that previous person tried to customize the software.
It keeps toggling between the same screen and wont boot up.
I am able to put it in download mode and recovery mode.
I have already wipes cache, have performed factory reset but no luck
I have tried to install original firmware via Odin but it says write failed after NAND Write in Odin.
Also tried to reflash the original PIT file but yet again it Odin says Failed.
Is there anything I can do with phone or it is completely gone?
Any help will be appreciated.
Thanks
You could try kies emergency repair.
You can also try Smart Switch
Related
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
Seems like a sudden death issue.take it to the service center.they'll replace the board.
Sent from my GT-I9300 using xda premium
Its either SDS or user bricked .
Service centre is your only option left .
jje
yes it's SDS
JJEgan said:
Its either SDS or user bricked .
Service centre is your only option left .
jje
Click to expand...
Click to collapse
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
skycasaway said:
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
Click to expand...
Click to collapse
as said before: service centre
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
The thing is you flashed a version not meant for your GT I9300. You flashed the Verizon bootchain. Verizon GSIII is Samsung SCH-i535.
Different hardware than a i9300 (Qualcomm Snapdragon MSM8260A Dual core CPU, and the i9300 has a Samsung Exynos 4412 Quadcore). Sorry bro. If you still have download mode, you can try flash a i9300 bootloader. If not. you're dead.
My mother's s3 recently stopped working, its the Vodafone UK model i9300XXELLA 16GB.
I've downloaded many stock roms, but no-one of them get past "nand write start" or "There is no PIT Partition", i've tried 2 Usb cables, one samsung stock one and one i bought.
I've tried Odin 1.85, 3.0.4 and 3.0.7 but all with same results, i tried re-partitioning the phone but it wont go past "getting PIT file".
Its soft-bricked i think, it wont go into recovery mode or boot, when it does boot it stays at samsung boot screen showing model, i've tried using a recovery.tar.md5 but to no avail, i just dont know what to do.
how can i flash it to stock? it wont work.
anyone?
gathorisx said:
anyone?
Click to expand...
Click to collapse
Do you have nand backup?
Do Not Bump
You have a damaged phone Nand .
You now require a service centre repair possibly a new motherboard if you want to try the |DIY route ..
Hi
I have a 16 gb galaxy s3 from metro pcs and flashed it to cynogenmod 11 snapshot m3, but did not liked it so i decided to go back to stock unfortunatley my back ups were in my internal phone's memory and were deleted. So i factory reset the phone and was stuck on cynogenmod for a while, till i found a stock rom fkr metro pcs galaxy s3 and i started the process. I went in recovery mode with CMW and wipe the phone complete e.g(factory reset, dalvik cache, system cache,). I then tied to to go into recovery mode and the phone shows up with a black screen saying "update went wrong connect phone to kies". I tried kies and nothimg cause it keeps on saying my serial number is wrong, so i called samsung and asked for my serial number.They asked for my IMEI i gave it to them and they said that was my serial number, point is Kies didnt work.So i tried Odin, tried to flash a metro pcs stock from shabbypenguin.com and i get and error saying NAND write operation failed. Idont know what to do i took the phone to a repair guy and even he couldnt fix it. I NEED HELP PLEASE!!!!
NOTE: The phone won't turn on and wont boot into recovery mode either,ONLY thing that works is download mode.
IS MY PHONE PERMANTELY BRICKED??????
NOTE:Thats not a picture of my phone but the screen that shows up when i try to turn on the phone. Thanks in advance to everyone
Hello xda!
I bought a broken s6 Edge of a co-worker. I thought i could fix it but its giving me a headache
The problem is that it only turns on when plugged into the computer, the screen than shows a emergency recovery option on Kies or swift switch (which requires a recovery code. And I nor my coworker have) the other thing I can do is boot into Odin.
Now my question is: Does anyone know a way to recover it without that code?
I tried installing a stock s6 edge OS on it using Odin but everytime I get a write error.
Please help!
Honk96 said:
Hello xda!
I bought a broken s6 Edge of a co-worker. I thought i could fix it but its giving me a headache
The problem is that it only turns on when plugged into the computer, the screen than shows a emergency recovery option on Kies or swift switch (which requires a recovery code. And I nor my coworker have) the other thing I can do is boot into Odin.
Now my question is: Does anyone know a way to recover it without that code?
I tried installing a stock s6 edge OS on it using Odin but everytime I get a write error.
Please help!
Click to expand...
Click to collapse
You don't have the sn at the back of the phone?. No box?.
Sent from my SM-G925F
the best thing to do is get the repair firmware files from sam mobile, flash each file in the right loading area. i.e cp for cp, ap in ap. if you flash a full file (usually names HOME) it never repairs the phone fully
Tryed rooting my T-Mobile Samsung Galaxy Edge Note SM-N915T but it failed on Odin using the CF Auto root, now I'm getting the "firmware upgrade encountered an issue " when ever I turn the phone on. I can get it into download mode. But its not showing up on Kies or Odin now, just keeps trying to connect on kies. I was going to try the firmware upgrade and initialization with kies, but there isn't a S/N on the back under the battery, just the IMEI number, tryed using it but says incorrect S/N. My question is it likely bricked or is there maybe some other things to try just to get it back to stock. I've tryed researching, but haven't found much on this model. Any help would be greatly appreciated. Thanks.
Managed to get it back up and running and rooted.