Hello , I have read in another topic that someone tried it but all apps including browser didn't recognize it (they needed a wifi or data connection to work) , even though he was able to ping outside (internet or external) ips via a local console (same thing happened with me following his guide , I can't post links yet , you can find his post easily by googling a little).
Is there any another way to enable it and working properly? I thought about that my phone has not ethernet drivers installed , so can someone send here ethernet drivers from a samsung galaxy tab tablet for example? Will this "hack" work? I mean , if I transfer galaxy tab ethernet files-drivers-options to another galaxy smartphone?
Or if the above sounds kinda silly and doesn't work, is there a custom rom or hack including ethernet support to try and flash? I don't want to change my OS or kernel , I just want to add ethernet support.
I did accept that the phone doesn't also support VIDEO OUT via MHL-HDMI , so I purchased a "Actiontec SBWD60A01 ScreenBeam Mini 2 Wireless Display Receiver HDMI Full HD" for this work , but I cannot accept that this super smartphone cannot work with ethernet ( I already own a female-ethernet-to-usb adapter) , I don't want to buy a tablet just for ethernet!!! This would be fool to do if I just bought one and after that discovered that s6 edge had really ethernet support via a way.
link to another thread on this topic
If you are rooted, have you tried:
http://forum.xda-developers.com/galaxy-s6-edge/general/enabling-ethernet-usb-otg-t3220476
Related
Hi!
I've read forum rules and even used the search button to ensure that this question (or at least the tv tuner possibility) has not been asked yet...
So, could we expect to see these kind of devices working in a "near" future?
And for the wifi dongle, I know the built-in wifi works very well, but we could use another dongle with bigger antenna or with a friendlier chipset based adapter (to verify my own wifi network security with aircrak-ng, for instance ).
Cheers!
(I've already seen disk drive, keyboard and mouse in action).
Any idea ?
[trying to put the post again on the first page...] I wish I could post in the development topic...
how to connect tnt receiver to my phone
Has anyone installed the samsung smart view remote on the s3 yet?
I have a D8000 tv and originally sold my iphone for a galaxy nexus for this app but it didn't work. then i got a note and it didnt work..
I want this on my s3
Well has anyone got this working on the S3?
work for me with htc hd2(android rom) sgs2 and sgn
check again setup
[How to set up]
1. Connect wireless/wired router to TV LAN port, or connect Samsung Wireless LAN adapter to TV USB port.
How to set up on TVs
[Menu]→[Network]→ configure settings in [Network Settings]
2. Connect your phone to wireless/wired router.
How to set up on Phones
[Settings]→ configure settings in [Wireless and Network]
Hi all!
Excuse my english please, is not my native language.
I'm a Galaxy S3 (android 4.1.1) user and i'm having problems (not only my device, also other S3 i tried and also one S2 of a friend of mine) to connect and read through a OTG cable, an USB device with 30MB of memory. It's a Navi2coach gps navigator for bike training from the o-synce company. This devce has a internal memory of 30 MB to save routes, workouts, tracks, trainings, etc. The S3 can't find the file system. I've tried with a low range AIRIS one pad 970,(android 4.0) and It CAN read it without problems. Do you know if there is any limitation of file system reading with the Samsung's?
Thank you all.
JVC GC XA1 Adixxion sport camera and wivideo problem
Hi!
Excuse my english please it's not my native language.
I have search across web and didn't find anything about this problem. Let me explain.
I have a new (and firmware updated) JVC GC XA1 sport camera. It has wifi connectivity. I have connected to the laptop succesfully (through wifi), and also to my Galaxy S3 trough my router (the jvc can connect with the S3 through a router or with a direct connection. In this mode, the S3 has to be a hotspot). The problem: I connect succesfully to the S3 hotspot mode. I open the wivideo application. The application finds the device, but in the image preview appears "loading" and that's all. I can't connect and says "Without cannection to the wifi camera" I thought i could have a faulty device or software problems, but i tried to another S3 with the same result...
Tried with an old Airis onepad970 (android 4.0), and works pretty well (preview image works and can connect to the camera). I tried with direct connection mode of the camera, (only works with Iphone WTF?!!?) and also works fine (with an iphone).
Anyone with problems at wivideo that could give some light?
Thank you all.
Hi People......i search a long time for an adapter, that can charge and use Usb on the Note 10.1 2014 (p600) at the same time.....no docking station do this, and all other adapters don't, cause the pins are channeled otherwise than on other devices......don't know why....but the adpater from Note Pro 10.1 with ethernet does.....but if i connect an ethernet Cable to it, nothing happens, cause (i think), Android has no Protocol to give a dhcp Adress to an ethernet device, and set the wifi Adapter off....
l found a tool for Nok 3, but I'm not sure, that will work on a P600. But on a mobile , it will not be needed as on a tablet ...
Anyone got an Idea to convert the ethernet drivers from Note Pro to the P600 kitKat ?
Sony for my ugly English
If you're rooted, this app should work: https://play.google.com/store/apps/details?id=xda.usbhost.test
I've never tried it with the Samsung branded ethernet adapter from the PRO series tablets, but I've used it in combination with an OTG cable and a generic USB to ethernet adapter, so it should work.
Thx a lot man......by the way, this is the same app, i wrote in the OP, i read about in the Note 3 Forum......i try and report
Result. ...is really strange.......the app accept the adapter, and get an ip adress...... ( it's a network Connection, coming from a router)....status gets to enabled, but i get no Internet Connection. ...strange.....i guess, Wifi have to be off. I also try to set the ip adress manually, also Router and Subnet Mask, but the same result, if i open a browser, no connection to the internet. Super SU Version is 2.02 .....any ideas?
Hi all,
is there a way to share the official keyboard between the tab s7+ and the s21 (using the wireless keyobard sharing feature) without being connected to a wifi network.
I was wondering because something i have to work on differents locations where i am not connected to wifi, but only on 5G.
Or maybe is there a way of doing this by using Bluetooth ?
I tried this but i get an error message.
Is there a way to be connected on bluetooth without sharing internet thru bluetooth? (as my tab and my phone have 5g sim's)
thanks all
DJCarlos said:
Hi all,
is there a way to share the keyboard between the tab s7+ and the s21 without being connected to a wifi network.
I was wondering because something i have to work on differents locations where i am not connected to wifi, but only on 5G.
Or maybe is there a way of doing this by using Bluetooth ?
I tried this but i get an error message.
Is there a way to be connected on bluetooth without sharing internet thru bluetooth? (as my tab and my phone have 5g sim's)
thanks all
Click to expand...
Click to collapse
By sharing, do you mean connecting a keyboard to both your Tab S7+ and S21?
You can via Bluetooth, but you can only connect to them one at a time. You can't connect a wireless keyboard to your tablet and phone simultaneously.
Wireless keyboards and mice all use BT. I have never seen any that use WiFi to connect to devices. At least not 802.11. There are plenty that use 2.4GHz, but they come with an USB wireless adapter.
Hi sorry i was not very precise. (i am going to edit my post)
I was talking about sharing the official keyboard of the tab s7 using the Wireless Keyboard Sharing feature that allow the keyboard to switch beetwen both devices.
This works very well but only when both devices are connected to the same wifi network.
this feature is presented here :
Galaxy Tab S7 & S7+ Users Can Enjoy More Streamlined Galaxy Ecosystem Experiences with One UI 3 Update
Samsung’s latest tablet devices, Galaxy Tab S7 and Tab S7+, are packed with a versatile range of productivity and connectivity features to help users connect
news.samsung.com
The official keyboard is not 'auto powered" so it cannont work as a standalone keyboard for the s21
Ah. Thanks for clarifying. This is news to me. I didn't know this was a thing. I use Microsoft Launcher on both my Tab S7 and Note 10+, so I'm not sure if will work.
I found this on Reddit. How to do it is on the comments.
https://www.reddit.com/r/GalaxyTab/comments/o0y3cz
"
You can enable this feature under Settings -> General Management -> Physical Keyboard -> Wireless Keyboard Sharing. This makes your Tab show up as a generic bluetooth keyboard/trackpad when other devices search for it. Then, on the other PC you can connect to the Tab S7 via bluetooth and that made it work for me.
(You need to have the book cover keyboard connected to your Tab during all this)"
Update. It uses BT. I just tried it and it worked with my Note 10+. Evidently, it'll work with any BT enabled device. I'm going to try it with my Surface Pro 6 tomorrow. I'll let you know whether or not it worked.
@DJCarlos It uses BT. I successfully connected my Tab S7 to my Microsoft Surface Pro 6. I am typing this on my Tab S7, but in my Edge browser on my Surface Pro 6. I am still not completely sold on its practicality though.
Edit: It does not need to be connected to WiFi for this to work. I connected my Note 10+ to my S7 via BT and typing this on my phone using my S7's keyboard. Neither my phone, nor my Tab S7 are connected to WiFi, nor is my phone's Hotspot is enabled.