Related
100%ROOT + TWRP RECOVERY
NOTE:This Was Tested By Me On TAB 4 t231 with Firmware Version T231XXU0ANG1_T231ODD0ANF3_INU ; It May Work With Latest Firmware Verions , But I Haven't Tested
REQUIREMENTS:
* PC
*TAB 4 T231
*DATA CABLE
*PROPER DRIVERS INSTALLED
*ODIN V3.09.zip HERE and Extract thanks to @thisisapoorusernamechoice
*Download TWRP from HERE AND EXTRACT
* DOWNLOAD SuperSU from HERE
INSTRUCTIONS:
RECOVERY :
Put your tablet in download mode by Pressing the Home button + Power + Volume Down; Release buttons ,wen u see a warning ; then you should press the volume up (vol +) to continue to download mode.
* Run Odin v3.09 and connect tablet, The box in odin will turn to light blue box ID: COM;
* Check The AP box and locate the unzipped file TWRP file recovery.img.tar.md5;
*Finally click on the Star button and wait for few seconds until Odin process and show you the notice Pass in green and completely restart the tablet, click Exit to exit Odin.
RECOVERY WAS SUCCESSFULLY FLASHED
ROOT
*BOOT INTO RECOVERY BY PRESSING POWER+HOME+VOL UP
*NOW SELECT INSTALL ZIP FROM SD CARD
* CHOOSE THE sUPERSU.ZIP
*CONFIRM YES BY SWIPING
REBOOT CHECK WITH ROOT CHECKER
SUCESSFULLY ROOTED Tab 4 t231
Credits and drivers
DRIVERS
*INSTALL SAMSUNG USB DRIVERS FROM HERE HERE
*IF IT DOESNT DETECT MOBILE , TRY PDANET+ DRIVERS FROM HERE
CREDITS
*ALLAH(SWT)
*GOOGLE
*XDA
*TWRP & UNKNOWN COMPILER
* @Chainfire for Supersu.zip
*odin
*Myself(ofcourse)
Can i use this witn sm t237p
Sent from my SM-T237P using XDA Premium 4 mobile app
shawn718 said:
Can i use this witn sm t237p
Sent from my SM-T237P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i second this. will it work with the SM-T237P?
ATTENTION! Do NOT use the download links for Odin in the OP! It has been reported that the link will install malware on your computer. If you need Odin 3.07 or 3.09, I have attached them to the bottom of this post, both files are 100% safe. They're zip files, just extract the folder inside to your desktop; to run Odin just double click the .exe file, yes it's that easy. @Faiyaz5yaz thank you for making this thread, it is always a good thing to instruct users how to root their devices, but please either change the Odin download link or at the very least remove it from the OP. Unfortunately it messed up another user's computer so bad he had to reinstall windows
thisisapoorusernamechoice said:
ATTENTION! Do NOT use the download links for Odin in the OP! It has been reported that the link will install malware on your computer. If you need Odin 3.07 or 3.09, I have attached them to the bottom of this post, both files are 100% safe. They're zip files, just extract the folder inside to your desktop; to run Odin just double click the .exe file, yes it's that easy. @Faiyaz5yaz thank you for making this thread, it is always a good thing to instruct users how to root their devices, but please either change the Odin download link or at the very least remove it from the OP. Unfortunately it messed up another user's computer so bad he had to reinstall windows
Click to expand...
Click to collapse
updated !!! thank u
Worked like a charm on my T231
THANK YOU SOOO MUCH
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Dark_Cristian said:
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Click to expand...
Click to collapse
C,
when you flash recovery with odin you must DESELECT auto restart.
when the flash is done [res-ok] disconnect your tab and manually reboot to RECOVERY.
then reboot as normal.
m
Dark_Cristian said:
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tab-4/development/root-root-twrp-recovery-samsung-galaxy-t3021471
http://forum.xda-developers.com/tab-4/general/root-tab-4-sm-t231-gsm-wifi-t3010102
@Faiyaz5yaz
Thanks TWRP works great on my Tab 4 T231
:good:
Hi all!
Root your GALAXY A5 on Stock Lollipop 5.0.2
DISCLAIMER
Code:
#include
/*
* Your warranty is now void.
* The ROM is under developement and have some bugs.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
First of all, download the CF-Auto-Root image for your variant:
CF-Auto-Root - A500F
CF-Auto-Root - A500FU
CF-Auto-Root - A500G
CF-Auto-Root - A500H
CF-Auto-Root - A500M
CF-Auto-Root - A500L
CF-Auto-Root - A500S
CF-Auto-Root - A500Y
CF-Auto-Root - A500YZ
Follow this steps to Root your GALAXY A5.
1. Download your 5.0.2 ROM for your device.
2. Rename the ROM file, just delete .md5 at the end of the file.
3. After making that, normally you have a .tar file, open the ROM and you can see all files under.
4. Extract recovery.img and boot.img files from the .tar ROM and move this files on Internal or External storage of your phone, remember it's location, you'll need it after.
5. Flash CF-Auto-Root of 4.4.4 for your variant using Odin.
6. When the phone reboot, install Flashify from Play Store, grant SuperSU request.
7. Launch Flashify and flash the both boot.img and recovery.img that you extracted.
Click to expand...
Click to collapse
Reboot and enjoy your GALAXY A5 rooted.
After rooting your A5, you can install TWRP for installing custom ROMs etc...
Here is a TWRP installation Tutorial:
http://forum.xda-developers.com/galaxy-alpha/help/to-port-twrp-to-galaxy-a5-a500fu-t3150843
Hi, try with KingRoot:
http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461 :good:
mygalaxya said:
Hi, it doesn't work... Other solution? Thanks
Click to expand...
Click to collapse
Unfortunately, there is no development for this device why?
Did u flash poland 5.02 version from odin? I dont have any update from ota.
Inviato dal mio SM-A500FU utilizzando Tapatalk
I received my update in OTA
Yes, you can root 5.0.2. Do the cf auto root first. Once it boots, then you should have root. But it's not done yet. Do not reboot or turn off device as it won't be able to boot back yet. Go to play store and install flashify.
After that, extract the 5.0.2 firmware you flashed (rename and erase the .md5 extension at the end and you now have a .tar file, which can be extracted like a .zip or .rar.
Once extracted, get boot.img and recovery.img and copy them to your phone.
Then open flashify, locate those two images and flash them.
You should have root without any problem.
First flash recovery.img. and renaming it wouldn't cause any harm. The file probably looks like this: something.tar.md5.
If you remove md5, then you have .tar file. Extract boot.img and recovery.img from it like you would from any .zip
droidqwerty said:
First flash recovery.img. and renaming it wouldn't cause any harm. The file probably looks like this: something.tar.md5.
If you remove md5, then you have .tar file. Extract boot.img and recovery.img from it like you would from any .zip
Click to expand...
Click to collapse
Thanks man it works!
droidqwerty said:
Yes, you can root 5.0.2. Do the cf auto root first. Once it boots, then you should have root. But it's not done yet. Do not reboot or turn off device as it won't be able to boot back yet. Go to play store and install flashify.
After that, extract the 5.0.2 firmware you flashed (rename and erase the .md5 extension at the end and you now have a .tar file, which can be extracted like a .zip or .rar.
Once extracted, get boot.img and recovery.img and copy them to your phone.
Then open flashify, locate those two images and flash them.
You should have root without any problem.
Click to expand...
Click to collapse
Hi, thanks for the info; I also have the same problem.
I would like to clarify your instructinos.
1) I have A500FU with lollipop 5.0.2 (which i downloaded and installed with odin)
2) I download cf auto root for 4.4.4?? is that right?
3) I extract boot.img/recovery.img from the 5.0.2 tar file
4) install flashify and flash the above.
Also you mentioned I need to do 3,4 without reboot, coz it wont boot. What will happen if it reboots by mistake? WIll it need a kies restore? or even just a 5.0.2 rom flash?
thanks alot
omicronxda said:
Hi, thanks for the info; I also have the same problem.
I would like to clarify your instructinos.
1) I have A500FU with lollipop 5.0.2 (which i downloaded and installed with odin)
2) I download cf auto root for 4.4.4?? is that right?
3) I extract boot.img/recovery.img from the 5.0.2 tar file
4) install flashify and flash the above.
Also you mentioned I need to do 3,4 without reboot, coz it wont boot. What will happen if it reboots by mistake? WIll it need a kies restore? or even just a 5.0.2 rom flash?
thanks alot
Click to expand...
Click to collapse
If it reboots by mistake, then it would be stuck in kernel logo and the screen would become whitish and remain like that. It's because CF root from 4.4.4 installs old kernel. If this happens, press volume down, home and power key together so that your device turns off.
Then enter download mode to reflash the rom with odin.
droidqwerty said:
If it reboots by mistake, then it would be stuck in kernel logo and the screen would become whitish and remain like that. It's because CF root from 4.4.4 installs old kernel. If this happens, press volume down, home and power key together so that your device turns off.
Then enter download mode to reflash the rom with odin.
Click to expand...
Click to collapse
Great thank you. I will try it today or tomorrow.
Out of curiosity, what if I replace the recovery.img inside cf-auto-root with the new recovery.img from lollipop? Will that do the trick??
Galaxy A7
Hi
I have a galaxy A7. I followed the same method using the A7 CF auto root file for Kitkat 4.4.4. But after flashing, the device reboots. But it does not go to the android. Instead it stays on the screen which shows... SAMSUNG.. GALAXY A7... Any suggestions please??
If it boots into the home screen only i can flash the stock recovery file
droidqwerty said:
Yes, you can root 5.0.2. Do the cf auto root first. Once it boots, then you should have root. But it's not done yet. Do not reboot or turn off device as it won't be able to boot back yet. Go to play store and install flashify.
After that, extract the 5.0.2 firmware you flashed (rename and erase the .md5 extension at the end and you now have a .tar file, which can be extracted like a .zip or .rar.
Once extracted, get boot.img and recovery.img and copy them to your phone.
Then open flashify, locate those two images and flash them.
You should have root without any problem.
Click to expand...
Click to collapse
Thanks! It worked perfectly!
droidqwerty said:
Yes, you can root 5.0.2. Do the cf auto root first. Once it boots, then you should have root. But it's not done yet. Do not reboot or turn off device as it won't be able to boot back yet. Go to play store and install flashify.
After that, extract the 5.0.2 firmware you flashed (rename and erase the .md5 extension at the end and you now have a .tar file, which can be extracted like a .zip or .rar.
Once extracted, get boot.img and recovery.img and copy them to your phone.
Then open flashify, locate those two images and flash them.
You should have root without any problem.
Click to expand...
Click to collapse
Tested and works on A3 and A5, thanks alot
govind.madhu93 said:
Hi
I have a galaxy A7. I followed the same method using the A7 CF auto root file for Kitkat 4.4.4. But after flashing, the device reboots. But it does not go to the android. Instead it stays on the screen which shows... SAMSUNG.. GALAXY A7... Any suggestions please??
If it boots into the home screen only i can flash the stock recovery file
Click to expand...
Click to collapse
Because you haven't flashed the boot.img and recovery.img from Lollipop after rooting.
No.. first i flashed cf auto root. Den phone reboots by itself.. it gets stuck on dsamsung screen. I cant go to the home screen at all. Without that how can i flash boot and recovery files ? Dats the peoblem
Sent from my SM-A700FD using XDA Free mobile app
govind.madhu93 said:
No.. first i flashed cf auto root. Den phone reboots by itself.. it gets stuck on dsamsung screen. I cant go to the home screen at all. Without that how can i flash boot and recovery files ? Dats the peoblem
Sent from my SM-A700FD using XDA Free mobile app
Click to expand...
Click to collapse
So, you don't flashed the recovery.img and boot.img! After flash Cf-Auto-Root, Use Flashify and flash the boot.img + recovery.img from 5.0.2 Lollipop ROM.
I wl wxplain in detail. I took odin. Connected the phone. Den loaded up the auto root file. Clicked on start. So it starts flashing.. after the flashing is complete.. phone reboots itself... ryt ? Den it stays on the samsung screen. Stuck. I can use flashify only if i can boot up completely.
Sent from my SM-A700FD using XDA Free mobile app
---------- Post added at 11:27 AM ---------- Previous post was at 11:21 AM ----------
In the first boot itself the phone gets stuck. It should boot into home screen. Then only i can use flashify.
Sent from my SM-A700FD using XDA Free mobile app
Now you have to reflash the stock ROM Lollipop for your A7 with Odin.
After flashed the ROM, flash the CF-Auto-Root package.
Don't reboot your device, otherwise same bootloop problem, when the device is bootup install "Flashify" from Play Store. Extract the boot.img and recovery.img from the 5.0.2 ROM.
Flash the boot.img and recovery.img from the Stock ROM with Flashify then restart your device and you have a fully functional root on your A7.
This method has worked with my A5.
Still not working
Than you for ur concern man.. But still it dos not work. After flashing cf auto root... I Just leave the phone. I do no touch it. It should boot into android. But it is not. It stays in d same screen.. Samsung... Galaxy A7
Maybe this works only for A3 and A5
Hello! Here im gonna show you an answer for how to flash custom recovery, this is very easy and you only need a pc or some couple of apps and a file.
First things first make sure you're phone is supported, unofficial custom recoveries works fine! Download the tar/img file of the custom recovery and some couple of apps on second method or a program and usb cable on first method.
PC method: Tar file
This one's will work fine and it will have no chance of failing in flash (Depends if something happened on the phone while flashing)(make sure you have samsung usb drivers installed!)
1. Install ODIN3 and Samsung USB Drivers
2. Make sure you have the downloaded tar file of the custom recovery.
3. Turn off the phone and make sure it is in ODIN Mode or Download Mode (A useful feauture for Samsung Devices)
4. Connect the phone to PC via USB Cable
5. Select the AP/PDA button (depends on you're ODIN3 version)
6.Select the tar file
Follow additional instructions from the custom recovery installation instructions or you may fail. (cuztomizing the settings or removing something on the phone)
7.After that click start and wait for some few seconds.
8a. If it leaded you to lock screen, launch recovery to make sure it flashed perfectly and works fine. But if it doesnt work reflash the recovery again/flash it with another version of recovery or another recoveries like CWM/Philz/TWRP (if reflashing dont work). Maybe because the recovery flashed is bugged or corrupted.
8b. If it leaded you automatically to "recovery booting" and then turns into ODIN Mode or Download Mode. Reflash the recovery again/Flash it with another recovery version or another recoveries like CWM/Philz/TWRP. Maybe because the recovery flashed is bugged or corrupted.
Non-PC Method: IMG File
This second method have some chances or RARE chances you may fail and brick or get stuck on a certain point, somehow convenient if you're out of options on flashing.
1. Download and Install Flashify app
2. Select your custom recovery IMG file
3. Wait for it to say that the file is flashed
4. Reboot the device
At this point, this one is the confusing point because you maybe dont know what to do next when you reboot the phone
5a. After rebooting the device, and it leads you to lock screen. Launch recovery to make sure its perfectly flashed and working. If not and when you launch the recovery, it leads you to download mode (recovery only problem), it looks like you need reflash it again/flash another recovery version or another recoveries like CWM/Philz/TWRP(if reflashing dont work) . Maybe because the recovery flashed is bugged or corrupted.
5b. After rebooting the device, it leads you automatically to recovery and not to the lock screen. It shows as "recovery booting" and then turns into ODIN Mode or Download Mode, this is the point you have to reflash it again/flash it with another recovery version or another recoveries like CWM/Philz/TWRP(if reflashing dont work). Maybe because the recovery flashed is bugged or corrupted.
This is some recoveries which include the two recoveries I said in this thread: Credits to @aapav01 @ali.filth for this amazing recoveries!
TWRP 3.0.0 by @aapav01 : http://forum.xda-developers.com/gal...recovery-twrp-2-8-6-0-touch-recovery-t3107535
Philz Recovery by @ali.filth : http://forum.xda-developers.com/galaxy-grand-2/orig-development/sm-g7102-philz-touch-6-47-4-t2798020
Request!: Whenever you visit some threads like this please leave a big thanks to them for there hardwork. Thank you
HAPPY FLASHING AND HAVE A GREAT CHRISTMAS AHEAD OF YOU!
goood job mate
agriculture said:
goood job mate
Click to expand...
Click to collapse
Thank you sir! Merry christmas and happy new year
NYT_RootComm said:
Thank you sir! Merry christmas and happy new year
Click to expand...
Click to collapse
how do i install custom recovery
download root.rar from link: s8.picofile.com/file/8300465700/root.rar.html
extract root.rar you found 4 file in it. please do step by step
1- first go to downloadmod and flash j.tar file by odin. if your phone bootloop do not worry weit 20 second poweroff then go to downloadmod
2- flash boot.tar.md5 by odin
3- restart your phone then inistall supersu2.87.apk
note:if you have problem do factory reset and renistall apk
enjoy from your rooted c7pro
if this usefull for you press thanks
(tested in hongkong firmware)
the twrp compiled by me bootup without problem but not mont any partition.i have family and no any time to fix it. anyone can fix it ...
sorry for my bad einglish
موفق باشید.
inanloukarim said:
download root.rar from link: s8.picofile.com/file/8300465700/root.rar.html
extract root.rar you found 4 file in it. please do step by step
1- first go to downloadmod and flash j.tar file by odin. if your phone bootloop do not worry weit 20 second poweroff then go to downloadmod
2- flash boot.tar.md5 by odin
3- restart your phone then inistall supersu2.87.apk
note:if you have problem do factory reset and renistall apk
Wifi not work after flash the boot file
Click to expand...
Click to collapse
i installed the twrp file and it success but it cannot boot into twrp recovery it can
alagoinhas said:
inanloukarim said:
download root.rar from link: s8.picofile.com/file/8300465700/root.rar.html
extract root.rar you found 4 file in it. please do step by step
1- first go to downloadmod and flash j.tar file by odin. if your phone bootloop do not worry weit 20 second poweroff then go to downloadmod
2- flash boot.tar.md5 by odin
3- restart your phone then inistall supersu2.87.apk
note:if you have problem do factory reset and renistall apk
Wifi not work after flash the boot file
Click to expand...
Click to collapse
i installed the twrp file and it success but it cannot boot into twrp recovery it can boot into normal recovery why ?
Click to expand...
Click to collapse
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Problem
hi pls say me work this package in G5528 Oreo
If it Don't Work,What Should i do??
hossein_vlz1 said:
hi pls say me work this package in G5528 Oreo
If it Don't Work,What Should i do??
Click to expand...
Click to collapse
1. Download your device boot.img
2. Move to your phone SD Card
3. Install magisk apk
4. now setup you magisk output format as .img.tar
5. now click on install
6. click on patched boot image
7. Now browse you boot.img
8. now wait for success
9. now find "patched_boot.img.tar" and move to your pc
10. reboot your phone into download mode
11. now flash patched boot img with odin
12. now your phone will restart. if it shows reset button on bottom of screen than reset your phone
Done.
OK
and
How i do changing IMG file to TAR??
I can not flash by img file
hossein_vlz1 said:
OK
and
How i do changing IMG file to TAR??
I can not flash by img file
Click to expand...
Click to collapse
install magisk
open it and goto settings
there you see "Patched Boot Output Format" click on it
Now tick .img.tar
thats it now install magisk with patched boot img
alien.baba said:
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Click to expand...
Click to collapse
Flashfire not working.
He says install Magisk 18 again. However, Magisk 18 is not installed again.
alien.baba said:
install magisk
open it and goto settings
there you see "Patched Boot Output Format" click on it
Now tick .img.tar
thats it now install magisk with patched boot img
Click to expand...
Click to collapse
Bro My phobe later asked me to reset factory and i do
but magisc isn't installed
and apeared yellow tirangle on the boot
pls help me more
hossein_vlz1 said:
Bro My phobe later asked me to reset factory and i do
but magisc isn't installed
and apeared yellow tirangle on the boot
pls help me more
Click to expand...
Click to collapse
now install magisk manually with apk.
your root will done.
Note: you should connected with internet & Yellow triangle will show in boot.
Need Help
I have rooted samsung galaxy on5 g5520 using above method
but magisk is unable to flash magisk modules .
error is that magisk is unable to extract zip file .
and flashfire is not also openning
hi
imranhussain12 said:
I have rooted samsung galaxy on5 g5520 using above method
but magisk is unable to flash magisk modules .
error is that magisk is unable to extract zip file .
and flashfire is not also openning
Click to expand...
Click to collapse
I think
flash twrp via odin. then use twrp to install magisk
hey i have a sm-g5520 on5 2016 and i want to update it to 8.1.0 and root it for get gapps, but idk how to do it. can you tell me step by step for an older guy? i really want to do it
barinbektas said:
hey i have a sm-g5520 on5 2016 and i want to update it to 8.1.0 and root it for get gapps, but idk how to do it. can you tell me step by step for an older guy? i really want to do it
Click to expand...
Click to collapse
Biraz daha sabredin. Yakında birşeyler olacak.
Help with Magisk Installation
alien.baba said:
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Click to expand...
Click to collapse
I am trying to apply the above steps. But what do you mean by "flash" ?
Flash using ODIN or Magisk? If Magisk, how to install Magisk as it needs to go to fastboot mode? (as our device seems to be unable of going to fastboot mode)
smt_best said:
I am trying to apply the above steps. But what do you mean by "flash" ?
Flash using ODIN or Magisk? If Magisk, how to install Magisk as it needs to go to fastboot mode? (as our device seems to be unable of going to fastboot mode)
Click to expand...
Click to collapse
flash using Odin. it's petched_boot.img.tar file. you don't need to fo to fastboot go to download mode by pressing Volume Down+Home Button+Power On Key.