Hello everyone,
I own Micromax bolt a089 (MTK mt6572).Here is my problem it started a week ago when i am using custom rom(xperia z3) then i decided to flash miui6(as i want to try this rom) but it stuck at boot screen then i clean phone and flash previous rom but same thing happens i tried several custom roms on it except mediamod rom but sd card is not working on it saying"No external storage available" and mount sdcard in settings is faded.so i decided to flash stock rom everything is fine but sdcard problem remain,
sdcard is working fine in pc and also detecting in recovery(cwm) as i flash roms from sdcard.
Please help me how fix this issue.
Related
Hi,
I am newbie at roms and installation of them. I was trying to install Android Revolution HD and it said that install super wipe and then install android revultion ROM. i applied that and that super wiped my all data including the internal SD where i put the rom. Now i dont have an external memory card. and now my phone is stuck in CWM. I am on Mac OS and i am trying to figure out a way to copy the ROM back on to the SD but its saying error mounting card etc and i cant read it in my mac anymore.
Would appreciate any help in this regard. Please consider the fact that i am on Mac as well..
Thanks.
Same happened to me.
Flash another rom via Odin and your phone will be fine
Hi guys,
I can't work out why but when I go to wipe all settings then install custom rom from zip file in cmw recovery, it completes normally but after the reboot it just stays on the android bot. I went back into recovery and managed the phone through usb to my PC & saw that in the phone storage there was nothing where there is obviously supposed to be boot files. I have installed this custom rom before & it has been no problem. I also have tried a few other roms (all that i've tried before & they all work) and the same thing happens. I have found one rom that worked strangley and when I manged the phone on my PC i saw that it has placed the boot files on the sd card (not the phone storage).
how can i fix this.
i am very new to rooting so please no complicated talk
can someone not help? this is a big issue.
ill try and explain the problem in more detail below...
i have been messing with my phone lately using CMW TOUCH to wipe my data then install rom from zip. everything was going great until now.
i want to install a rom (that i have installed before.so i know its compatible with my phone), i go through tge same procedure of wiping data then installing from zip.all goes the way it should with it telling me its installing from zip, after a while it tells me to reboot the phone. when i do all that happens is it stay on the green android bot for 1 min then reboots. i went into CMW TOUCH to connect phone to pc & found out that it installed nothing, nothing on the phone storage and on the sd card except the custom rom.
i have tried this with few other roms all with the same results.
NOW...
ive managed to find a rom that will install so it is functional all except recently after a reboot it has stopped detecting the sim,weird.
i connected the phone to my pc to find that all boot files are stored on the sd card not phone storage like it used to.
i had an idea that i will try later today and that is to move the custom rom over to the phone storage from the sd card. remove the sd card during install. maybe that will force the install to use the phone storage for the boot files
will let you know the outcome
jamos
i have just tried to install the rom with the sdcard removed from phone & the same thing happened. even though during the installation it tells me that it is formatting system then installing it installs nothing to the phone storage.
Hi everyone,
I'm getting a very annoying issue on my Wiko Cink Five (clone of the MMX A116) when I'm flashing a new ROM : the memories are swapped directly after flashing any ROM without having the swap memory file applied. I was running 4.4.4 [CM11][PORT][UNOFFICIAL] CyanogenMod 11 For Canvas HD V0.1 - NxtGen when I decided to go back to a stable OS (for HW decoding/video recording issues) so I flashed this one : [ KitKat 4.4.2 ] ROM for Micromax A116 [UNOFFICIAL]
In the first ROM (CM11) there was the swap applied by default in the package of the ROM and I knew the swap was actually in. In the oldest versions of the CM11 ROM (before the "nextgen v 0.1) the swapp wasn't included and i swapped the memories with the memory swap for CM11. When I flashed the new stable ROM in 4.4.2 (without swap in it) after total reset ("clean to install a new ROM" option in Philz recovery), I found that the internal memory was recognized as the SD card and inversement. I was using Solid Explorer and it showed me my sdcard content instead of the internal memory content at /storage/sdcard0, which is not normal because no swap was applied. I pulled back the SD card and rebooted the phone and in settings/storage there was for only choice of storage the SD card. The internal memory wasn't mentioned anywhere. I was too unable to copy or move file from one memory to another but I was able to copy or move files on one memory. That issue made me unable to restore backups from Titanium Backup that was telling me all the time "unknown package" when trying to install apps (installing them directly from the TB saves .gz files in the SD card did work but not the data restore).
What I tried to solve the issue :
- apply the memory swap restore for CM11 on the not CM11 ROM (which was a bad idea but I tried...) ---> stuck on boot logo !
- install another ROM (the White1 4.2.1) after clean reset ---> memory still swapped !
- reflash the CM11 ROM and apply the swap restore ---> bootloop !
Then I was out of ideas...
I do not have any problems with the recovery, it shows me my SDcard when I want to backup or restore from my SDcard in /storage/sdcard1 and shows me too my internal memory at /storage/sdcard0 so no problems in recovery, the issue only comes when using a ROM...
About the kernels, i never flashed any kernel in addition of a ROM package except for the not CM11 ROM, the 4.4.2 one which was the New Hyper Kernel (link in the thread of the ROM).
I restored the CM11 ROM from a backup because this is the best working one as I don't have any of the writing issues caused by the memory swapped as she is working well with it but I'm still unable to use another ROM and so record videos, have Bluetooth and WiFi turned on together or watch HD videos...
So this is it !
I don't have much more informations to give and hope that is enough clear to understand. I'm French for those who speak French so don't expect an very good English quality, being sorry for that too.
Best regards, Hast0n.
Hi everyone,
I'm getting a very annoying issue on my Wiko Cink Five (clone of the MMX A116) when I'm flashing a new ROM : the memories are swapped directly after flashing any ROM without having the swap memory file applied. I was running 4.4.4 [CM11][PORT][UNOFFICIAL] CyanogenMod 11 For Canvas HD V0.1 - NxtGen when I decided to go back to a stable OS (for HW decoding/video recording issues) so I flashed this one : [ KitKat 4.4.2 ] ROM for Micromax A116 [UNOFFICIAL]
In the first ROM (CM11) there was the swap applied by default in the package of the ROM and I knew the swap was actually in. In the oldest versions of the CM11 ROM (before the "nextgen v 0.1) the swapp wasn't included and i swapped the memories with the memory swap for CM11. When I flashed the new stable ROM in 4.4.2 (without swap in it) after total reset ("clean to install a new ROM" option in Philz recovery), I found that the internal memory was recognized as the SD card and inversement. I was using Solid Explorer and it showed me my sdcard content instead of the internal memory content at /storage/sdcard0, which is not normal because no swap was applied. I pulled back the SD card and rebooted the phone and in settings/storage there was for only choice of storage the SD card. The internal memory wasn't mentioned anywhere. I was too unable to copy or move file from one memory to another but I was able to copy or move files on one memory. That issue made me unable to restore backups from Titanium Backup that was telling me all the time "unknown package" when trying to install apps (installing them directly from the TB saves .gz files in the SD card did work but not the data restore).
What I tried to solve the issue :
- apply the memory swap restore for CM11 on the not CM11 ROM (which was a bad idea but I tried...) ---> stuck on boot logo !
- install another ROM (the White1 4.2.1) after clean reset ---> memory still swapped !
- reflash the CM11 ROM and apply the swap restore ---> bootloop !
Then I was out of ideas...
I do not have any problems with the recovery, it shows me my SDcard when I want to backup or restore from my SDcard in /storage/sdcard1 and shows me too my internal memory at /storage/sdcard0 so no problems in recovery, the issue only comes when using a ROM...
About the kernels, i never flashed any kernel in addition of a ROM package except for the not CM11 ROM, the 4.4.2 one which was the New Hyper Kernel (link in the thread of the ROM).
I restored the CM11 ROM from a backup because this is the best working one as I don't have any of the writing issues caused by the memory swapped as she is working well with it but I'm still unable to use another ROM and so record videos, have Bluetooth and WiFi turned on together or watch HD videos...
So this is it !
I don't have much more informations to give and hope that is enough clear to understand. I'm French for those who speak French so don't expect an very good English quality, being sorry for that too.
Best regards, Hast0n.
Hi everybody!
I have a weird problem with the external sdcard in my phone. Suddenly, my phone stops to recognize my external memory. When I insert the memory card and turn the cellphone on happens the same when you clean dalvik cache, at the end, the phone is freezed (sometimes doesnt even recognize the sim card), restarts and again, the same cycle.
When I switch memory cards with another phone, both works very well and with no issues at all. The problem is just with my phone and only with that memory card. Here are the tests I already did:
Phone: Samsung Galaxy S3 i9300 international.
Phone using a custom ROM (Cyanogenmod 12.1, stock kernel)
Phone using custom ROM [5.1.1_r6][FULL-O3][i9300] RESURRECTION REMIX 5.5.1[CM12.1][OPTIMIZED]
Phone using original ROM flashed with Odin (Jelly bean 4.3, stock kernel)
Phone flashed using TWRP and CMW.
Memory card formatted in Windows (FAT32 and exFAT)
A log from CMW says: "Can't partition non mmcblk device: /devices/platform/s3c-sdchi.2/mmc_host/mmc1", no idea what it means.
Maybe something is wrong in the very core of my phone, not sure if when I installed original ROM with Odin is really like the phone came out of the factory.
Any ideas about what to do next? I'm sure the most simple thing is to drop the memory card to the garbage, but as it works in Windows and other phones, is something I want to solve.
Thanks in advance!