Does anyone have the ZVB tot. I see the ZVA-to-ZVB update zip but it say forbidden when I try to download that. For some reason I cannot get the update OTA... maybe it isn't pushed to the tower that I'm using yet?
l33tlinuxh4x0r said:
Does anyone have the ZVB tot. I see the ZVA-to-ZVB update zip but it say forbidden when I try to download that. For some reason I cannot get the update OTA... maybe it isn't pushed to the tower that I'm using yet?
Click to expand...
Click to collapse
autoprime had a secret source for the .tot.
But if mediafire won't let you dl the update, I can upload it for you if you want.
l33tlinuxh4x0r said:
Does anyone have the ZVB tot. I see the ZVA-to-ZVB update zip but it say forbidden when I try to download that. For some reason I cannot get the update OTA... maybe it isn't pushed to the tower that I'm using yet?
Click to expand...
Click to collapse
Where did you find the ZVA-to-ZVB update zip? My phone gets stuck at "rebooting now" when I try to apply the update normally, so I want to apply the OTA via ADB.
engine95 said:
autoprime had a secret source for the .tot.
But if mediafire won't let you dl the update, I can upload it for you if you want.
Click to expand...
Click to collapse
Could you upload it for me?
ReaperManHK said:
Where did you find the ZVA-to-ZVB update zip? My phone gets stuck at "rebooting now" when I try to apply the update normally, so I want to apply the OTA via ADB.
Could you upload it for me?
Click to expand...
Click to collapse
It just happens to be posted right here, http://forum.xda-developers.com/showthread.php?p=63167696
ReaperManHK said:
Where did you find the ZVA-to-ZVB update zip? My phone gets stuck at "rebooting now" when I try to apply the update normally, so I want to apply the OTA via ADB.
Could you upload it for me?
Click to expand...
Click to collapse
If you have TWRP installed use method A from the following thread. It will flash a pre rooted zvb image. Don't forget to upgrade your radio too.
http://forum.xda-developers.com/spr...990-zvb-root-method-zvb-rooted-stock-t3211878
engine95 said:
It just happens to be posted right here, http://forum.xda-developers.com/showthread.php?p=63167696
Click to expand...
Click to collapse
Sorry if this is a dumb question, I'm new to tinkering with the G3 (my daily driver is a Nexus 6), is a tot file the same as an OTA zip, or is it more of a factory image equivalent? I don't particularly want to root or install TWRP. I just wanted to use the stock reovery "apply update via ADB"
ReaperManHK said:
Sorry if this is a dumb question, I'm new to tinkering with the G3 (my daily driver is a Nexus 6), is a tot file the same as an OTA zip, or is it more of a factory image equivalent? I don't particularly want to root or install TWRP. I just wanted to use the stock reovery "apply update via ADB"
Click to expand...
Click to collapse
A tot is a factory image but you need your computer to install it.
l33tlinuxh4x0r said:
A tot is a factory image but you need your computer to install it.
Click to expand...
Click to collapse
Okay, I figured as much - is there a way like Nexus images to install without wiping? I looked briefly at the install process, and it seems you need a Windows computer? Thanks for being so helpful, I know this is OT.
ReaperManHK said:
Okay, I figured as much - is there a way like Nexus images to install without wiping? I looked briefly at the install process, and it seems you need a Windows computer? Thanks for being so helpful, I know this is OT.
Click to expand...
Click to collapse
No there is not a way to use a tot without wiping and yes you need a windows computer.
Related
This firmware file takes you straight to JellBean on LGE970. There is no need to do the OTA if you flash this.
http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
Thanks,
G33k3r
g33k3r said:
Everyone was looking for it, so here it is.
https://mega.co.nz/#!HwJhmAbR!VnIAQ3pOyw48Q0ALMDXCZ3vosGwEzpq4KsvUM2Vt_co
Thanks,
G33k3r
Click to expand...
Click to collapse
how long you been holding on to this
MysteryEmotionz said:
how long you been holding on to this
Click to expand...
Click to collapse
Haha, no one needed it since you couldn't root while on 11c so I just kept it tucked away. :laugh:
g33k3r said:
Haha, no one needed it since you couldn't root while on 11c so I just kept it tucked away. :laugh:
Click to expand...
Click to collapse
ive been looking for it since the day i joined the lgog community. everyone kept saying it didnt exist
MysteryEmotionz said:
ive been looking for it since the day i joined the lgog community. everyone kept saying it didnt exist
Click to expand...
Click to collapse
HA!! I wish I knew. Well at least it's here now.
g33k3r said:
HA!! I wish I knew. Well at least it's here now.
Click to expand...
Click to collapse
yup im dling now to add to my own archives. now go get your hands on 20j
g33k3r said:
Haha, no one needed it since you couldn't root while on 11c so I just kept it tucked away. :laugh:
Click to expand...
Click to collapse
HE HELD IT FROM US!
Thanks man. Looks like we're all gonna get the JB update no problem now.
when I installed LGNPST i get this error LG USB/Parrell dongle not detected, Im using tsilenzos automated lgnpst is that the right one. if not can osmeone upload a correct version or a link. Thanks!
Re: Firmware E97011c Download - Needed for JB Update
Thanks I thought I had this before but had wrong version... Such a long download though I will try and have Snowleps JB hold me off till something flash able comes by.
Sent from my LG-E970 using Tapatalk 2
Re: Firmware E97011c Download - Needed for JB Update
dalekinder said:
when I installed LGNPST i get this error LG USB/Parrell dongle not detected, Im using tsilenzos automated lgnpst is that the right one. if not can osmeone upload a correct version or a link. Thanks!
Click to expand...
Click to collapse
Reinstall it. I had that error once because the download didn't complete
Sent from my LG-E970 using xda premium
just wanted to add another confirmation that LGNPST'ing to the 11c in this thread does indeed let you get the JB update. it gave me the update option on the first try.
freebee269 said:
just wanted to add another confirmation that LGNPST'ing to the 11c in this thread does indeed let you get the JB update. it gave me the update option on the first try.
Click to expand...
Click to collapse
Exactly , the update popped up instantly when i booted the phone. Problem. you cant root!
Finally!!! After re-locking, un-rooting, and still getting errors, this worked. Thanks.
Okay, after going to 10o and nothing, plus getting a soft brick because I re-rooted, then LGNPSTing again to 11c, I still do not get an update! Now the phone says wait another 43hours to try again. What's going on? I am at home on WiFi and my AT&T Microcell.
So I am making an attempt to LGNPST to the linked firmware and it seems to be stuck at 2%? I have only used it once before and that was some time ago and it seemed to go much faster. It has been stuck for 13 min
EDIT I had a bad download got it to flash with the new download.
Could somebody post the md5 of the file from mega? *EDIT* nvm. I finally got mine working. If anybody else is interested, my md5 is 4d6bc49a7d4ab865c7bf55ea6fb4963a
:crying: back to 11c but not jb update:crying::crying::crying:
I have the program. The program does not recognize my phone. It shows up as unkown with no info filled in. I tried running the program as admin,regular and even tried to restart my computer and no luck. I installed LG drivers 3 times.I have the Bin file. I found the DLL for e970. I tried selecting the bin from lgnspt no luck. Only one shows up. I tried putting my phone in download mode and selecting the DLL from the file tab and the main one where you select your bin to and no luck,still just the original DLL shows up. I tried selecting the original DLL and the BIN I download and it tells me all of my phone data will be erased. So im like oh hell naw not just to get jelly bean on my phone and come to you guys for help. What should I do,this is some serious trail and error. BTW i have to now wait 130 hours before I can try again and I adjusted the clock multiple times which is why that has happened.
Argh. My 11c ota failed on Monday (I must have pocket-initiated it and I wasn't ready). Kind of annoying that it won't retry.
I still have the dlpkgfile from that update but I'm not sure if it's complete. And I'm not sure if this: http://forum.xda-developers.com/showthread.php?t=1803090 will work with our phone either. Anyone have the dlpkgfile and can verify the size/md5 and/or the method to apply it?
Stupid questions that a lot of us are going to have: I am rooted but never unlocked the bootloader and would prefer not to at this point. If I LGNPST this file what is the effect on my phone? i.e. what gets reverted to stock and what stays as I had it? Will it un-root, and if so, can I use OTA rootkeeper to reapply root on 11c, or should I re-root the original way?
The MI1 Odin does not help. So I'd like to try the MJ7. But I can't go OTA since I can't boot past the Verizon logo.
I tried the update.zip someone posted, but I do not think that was installed on my phone.
Can someone help? Thx.
BaSingSe said:
The MI1 Odin does not help. So I'd like to try the MJ7. But I can't go OTA since I can't boot past the Verizon logo.
I tried the update.zip someone posted, but I do not think that was installed on my phone.
Can someone help? Thx.
Click to expand...
Click to collapse
Search and read before you post. No one has one.
That is the reason I'm asking.
BaSingSe said:
That is the reason I'm asking.
Click to expand...
Click to collapse
You have to put the update.zip on your SD. Boot into recovery, then update.zip from the SD.....
That was what I did. I'm not sure if it went through. I did not see any update....
BaSingSe said:
That was what I did. I'm not sure if it went through. I did not see any update....
Click to expand...
Click to collapse
As stated elsewhere, you must be STOCK to update. No "bloat" removed, no special software (like the Xposed frawework) enabled.
The update validates that all of 1500+ files are unaltered before it runs. If you've changed any of those, then it won't install.
That's why the developers have told people having problems with the update to start with flashing a stock MI1 ROM.
I posted a shell script that allows you to figure out if everything on your phone is acceptable for the update - post http://forum.xda-developers.com/showthread.php?p=46917189#post46917189
You might want to run that to see what's blocking the OTA.
Looks like once we get the tar, there's a KNOX safe root method already - http://www.theandroidsoul.com/universal-root-de-la-vega-script/
what did it wrote when you click update.zip?
It says something like Signature Verification Failed, when I tried to update the update.zip file.
I captured the OTAPkg.zip, but I can't upload it...... Any suggestions where I should upload it for everyone??
xangel9626 said:
I captured the OTAPkg.zip, but I can't upload it...... Any suggestions where I should upload it for everyone??
Click to expand...
Click to collapse
Send a tip to the moderators at xda-developers.com or alert androidpolice.com, I can see them helping you.
xangel9626 said:
I captured the OTAPkg.zip, but I can't upload it...... Any suggestions where I should upload it for everyone??
Click to expand...
Click to collapse
Very, very nice! Thanks for capturing the OTA! I'd be glad to help you in the uploading process. Perhaps a good place to upload it would be DevHost or Google Drive? Feel free to let me know if you need help doing so. Once it's uploaded, I'll be sure to update the story I put out earlier on this update: http://www.xda-developers.com/andro...6-update-finally-rolls-out-to-att-htc-one-m7/
google drive or any file host really
willverduzco said:
Very, very nice! Thanks for capturing the OTA! I'd be glad to help you in the uploading process. Perhaps a good place to upload it would be DevHost or Google Drive? Feel free to let me know if you need help doing so. Once it's uploaded, I'll be sure to update the story I put out earlier on this update: http://www.xda-developers.com/andro...6-update-finally-rolls-out-to-att-htc-one-m7/
Click to expand...
Click to collapse
Wonders_Never_Cease said:
google drive or any file host really
Click to expand...
Click to collapse
Here you go guys Enjoy ...
http://www.androidfilehost.com/?fid=23501681358542441
MD5: 317bae285618b070279b3a58b2e308e5
Cool thanks sir
clsA said:
I'll post the link here at about 10:15 EST (around 10 min to go)
Click to expand...
Click to collapse
xangel9626 said:
I captured the OTAPkg.zip, but I can't upload it...... Any suggestions where I should upload it for everyone??
Click to expand...
Click to collapse
I got you covered .. thanks for the heads up
clsA said:
Here you go guys Enjoy ...
http://www.androidfilehost.com/?fid=23501681358542441
MD5: 317bae285618b070279b3a58b2e308e5
Click to expand...
Click to collapse
Many thanks, good sir. Article updated and credit given.
clsA said:
I got you covered .. thanks for the heads up
Click to expand...
Click to collapse
Thanks clsA. I tried to post a link and I wasn't even allowed to do that......
xangel9626 said:
Thanks clsA. I tried to post a link and I wasn't even allowed to do that......
Click to expand...
Click to collapse
it's ok ... Welcome to XDA
Flashable w/ stock recovery?
xandr115 said:
Flashable w/ stock recovery?
Click to expand...
Click to collapse
It's supposed to be. I got the update from my wife's phone which was able to update, but when I tried to apply it to my phone (which won't download the update) with recovery, I get a Check CID Failed and my phone reboots. All you can do is try and see if it works.
xangel9626 said:
It's supposed to be. I got the update from my wife's phone which was able to update, but when I tried to apply it to my phone (which won't download the update) with recovery, I get a Check CID Failed and my phone reboots. All you can do is try and see if it works.
Click to expand...
Click to collapse
So is this the Sense 6 update only? Will I lose any data, apps, or settings?
xpurtwitness said:
So is this the Sense 6 update only? Will I lose any data, apps, or settings?
Click to expand...
Click to collapse
Nope, it's just the Sense 6 update, everything on your phone is safe.
xpurtwitness said:
So is this the Sense 6 update only? Will I lose any data, apps, or settings?
Click to expand...
Click to collapse
OTApkg does not wipe the phone like a RUU... your sdcard and data are safe
If you do have to RUU back to stock be sure and backup everything as it will wipe the phone.
clsA said:
OTApkg does not wipe the phone like a RUU... your sdcard and data are safe
If you do have to RUU back to stock be sure and backup everything as it will wipe the phone.
Click to expand...
Click to collapse
Ok, I thought so. Unfortunately, I'm getting errors. The OTA just fails on its own, and flashing this zip in recovery does too. It says there is a data error in the file or that there is a problem with buil.prop.
I've tried the latest CWM touch, CWM standard, Recovery_Cingular_US_3.17.502.3.img, andrecovery_m7_att_stock_1.26.502.12.img. I've tried clearing cache and dalvik first, mounting system, and even toggling signature verifcation.
Was going to try temp un-rooting (via SuperSU) next. Hoping I don't have to flash the RUU and start from zero. Any other suggestions?
I'm s-off, htc-dev unlocked.
Added screenshots of install after new download of zip and temp un-rooted, install after mounting system, install after toggling verification. build.prop is definitely in system.
xpurtwitness said:
Ok, I thought so. Unfortunately, I'm getting errors. The OTA just fails on its own, and flashing this zip in recovery does too. It says there is a data error in the file or that there is a problem with buil.prop.
I've tried the latest CWM touch, CWM standard, Recovery_Cingular_US_3.17.502.3.img, andrecovery_m7_att_stock_1.26.502.12.img. I've tried clearing cache and dalvik first, mounting system, and even toggling signature verifcation.
Was going to try temp un-rooting (via SuperSU) next. Hoping I don't have to flash the RUU and start from zero. Any other suggestions?
I'm s-off, htc-dev unlocked.
Added screenshots of install after new download of zip and temp un-rooted, install after mounting system, install after toggling verification. build.prop is definitely in system.
Click to expand...
Click to collapse
you have to RUU back to stock to use OTA update you don't flash it like a rom
read my post here >> http://forum.xda-developers.com/showthread.php?t=2659374
clsA said:
you have to RUU back to stock to use OTA update you don't flash it like a rom
read my post here >> http://forum.xda-developers.com/showthread.php?t=2659374
Click to expand...
Click to collapse
Got it. So in what case would flashing the zip actually work without having to RUU and get the OTA?
xpurtwitness said:
Got it. So in what case would flashing the zip actually work without having to RUU and get the OTA?
Click to expand...
Click to collapse
on a totally stock phone and flashed from stock recovery
clsA said:
on a totally stock phone and flashed from stock recovery
Click to expand...
Click to collapse
This OTA Update Works with ATT-4.18.502.7-Stock-Rooted-ODEX ROM?
Thanks!
I have been trying to install TWRP but i cant get it going,
I am rooted and on 23C Stock Lollipop.
any ideas please.
Thanks
I believe you need to downgrade back to 10B to install TWRP.
What's the error message your getting?
tatootie67 said:
What's the error message your getting?
Click to expand...
Click to collapse
After trying to install TWRP and reboot into recovery, i get the boot screen with some small white letters in the top left corner of the screen then screen just gos blank.
thats it.
nothing else.
Deleted post
Byonik said:
Deleted post
Click to expand...
Click to collapse
That is exactly what happens
bump
Easiest way is to kdz back to 10b ,stump root add twrp
Using twrp manager app then flash SD or Jasmine Rom.
I just hard bricked doing it the adb way because I didn't have twrp at the time.
You have to downgrade the bootloader (aboot.img) to the one from 12B. You can get the file you need from the sticky .img repository (that sounds wrong) in the General section. I don't know the adb command off the top of my head to install it.
roirraW "edor" ehT said:
You have to downgrade the bootloader (aboot.img) to the one from 12B. You can get the file you need from the sticky .img repository (that sounds wrong) in the General section. I don't know the adb command off the top of my head to install it.
Click to expand...
Click to collapse
Link is down on that particular aboot.img
It's also in the JasmineROM 6.0 zip.
Sent from my VK810 4G
Thank u
Got it! Worked like a charm. Appreciate your NFO....
aboot
Am just supposed to downgrade the aboot? and then install TWRP right after?
Deleted
need help with downgrading aboot.
I am not as versed in the Dev world. Is there anybody that can help me downgrade the boot image to KitKat so I can flash TWRP and/or provide a stock recovery method so I can attempt to get that back? From ops ota 23c rooted predicament.
Thanks in advance.
MrSpohn1 said:
I am not as versed in the Dev world. Is there anybody that can help me downgrade the boot image to KitKat so I can flash TWRP and/or provide a stock recovery method so I can attempt to get that back? From ops ota 23c rooted predicament.
Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
That one has saved my ass a few times. Verrry handy.
It's also the only way I was able to load twrp after the 23c OTA. Spent a ton of time figuring that one out.
Here is the VZW lollipop kdz. Got it from the LG Phone From app
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWE3T8Y032LDA1G8D325QQB/VS98523C_01.kdz
Did you try it? If so, what version did you try from?
Thank you, @bigshotrob22!
legalkill said:
Did you try it? If so, what version did you try from?
Click to expand...
Click to collapse
This isn't an OTA file, it's a KDZ which overwrites anything you have on your phone no matter what, using LG Mobile Tool 2014 on a Windows PC to flash it.
legalkill said:
Did you try it? If so, what version did you try from?
Click to expand...
Click to collapse
Haven't tried it yet
roirraW "edor" ehT said:
Thank you, @bigshotrob22!
This isn't an OTA file, it's a KDZ which overwrites anything you have on your phone no matter what, using LG Mobile Tool 2014 on a Windows PC to flash it.
Click to expand...
Click to collapse
No problem.
roirraW "edor" ehT said:
Thank you, @bigshotrob22!
This isn't an OTA file, it's a KDZ which overwrites anything you have on your phone no matter what, using LG Mobile Tool 2014 on a Windows PC to flash it.
Click to expand...
Click to collapse
I understood, I am on 23b and I didn't want to go back to 12 or 10 to go up to another "unofficial release", but if this flashes directly with no problem I may be more inclined to try it out.
this is the official OTA
This is it , finally we have the OTA , I checked and my official
Firmware is now 23c. Use the LG phone from app
legalkill said:
I understood, I am on 23b and I didn't want to go back to 12 or 10 to go up to another "unofficial release", but if this flashes directly with no problem I may be more inclined to try it out.
Click to expand...
Click to collapse
Yes you can flash directly without rolling back.
Anyone try rooting and TWRP? I assume it's possible, based on the leaks, but not ready to wipe everything until I know.
TIA.
bigshotrob22 said:
Yes you can flash directly without rolling back.
Click to expand...
Click to collapse
Has anyone tried that with this update? I would like to go straight from 23A to this 23C but I don't want to screw up my phone. This will be the first time I've used the LG Mobile tool.
Krusej23 said:
Has anyone tried that with this update? I would like to go straight from 23A to this 23C but I don't want to screw up my phone. This will be the first time I've used the LG Mobile tool.
Click to expand...
Click to collapse
Technically you can 'update' from 23A, but it's a KDZ so you will lose all data on your internal storage.
gatorstew said:
Technically you can 'update' from 23A, but it's a KDZ so you will lose all data on your internal storage.
Click to expand...
Click to collapse
That works for me because I'm not worried about my data on the phone since I have an LG backup. I'll try it this weekend.
Question
Can I flash the 23C_01 Lollipop KDZ, then manually (dd commands) flash the bumped 23C kernel then manually flash TWRP 2860 and be ok or will I get the secure boot error?
sd_N said:
Can I flash the 23C_01 Lollipop KDZ, then manually (dd commands) flash the bumped 23C kernel then manually flash TWRP 2860 and be ok or will I get the secure boot error?
Click to expand...
Click to collapse
You also need the 12B bootloader (aboot.img).
Sent from my VK810 4G
roirraW "edor" ehT said:
You also need the 12B bootloader (aboot.img).
Sent from my VK810 4G
Click to expand...
Click to collapse
Yes...the link is down on that particular aboot.img.... MediaFire shows a page loop error. Would you happen to have it anywhere? .. or point me in the right direction.
sd_N said:
Yes...the link is down on that particular aboot.img.... MediaFire shows a page loop error. Would you happen to have it anywhere? .. or point me in the right direction.
Click to expand...
Click to collapse
It's also in the JasmineROM 6.0 zip.
Sent from my VK810 4G
I rooted via this thread: http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
I used the Windows drivers here (half-way down the page): http://www.lg.com/us/support-mobile/lg-VS985-Metallic-Black
I loaded Verizon upgrade assistant and it says I have an upgrade available even though I have 23A loaded on my phone. In the version column, it says 23A. Does mean that's the upgrade or what is on my phone already.
Krusej23 said:
I loaded Verizon upgrade assistant and it says I have an upgrade available even though I have 23A loaded on my phone. In the version column, it says 23A. Does mean that's the upgrade or what is on my phone already.
Click to expand...
Click to collapse
I'd have to see it myself to be able to tell you. What I can tell you is that the 23C_01 KDZ has at least some different files than the 23C "OTA" leak we were using on here.
So if you're on the 23C that was available before the last 24 hours, it's not the same 23C. Similar, not identical.
Sent from my VK810 4G
roirraW "edor" ehT said:
I'd have to see it myself to be able to tell you. What I can tell you is that the 23C_01 KDZ has at least some different files than the 23C "OTA" leak we were using on here.
So if you're on the 23C that was available before the last 24 hours, it's not the same 23C. Similar, not identical.
Sent from my VK810 4G
Click to expand...
Click to collapse
Will I be able to tell the difference between the two when it's loaded on the phone?
Krusej23 said:
Will I be able to tell the difference between the two when it's loaded on the phone?
Click to expand...
Click to collapse
I doubt if you'd be able to see the difference, but there's definitely technical differences. Example: the 23C_01 modem.img is 7 MB smaller than the one from the 23C leak we had.
Sent from my VK810 4G