This thread collects all known OTAs for the Nexus 6P.
Current firmware: Android 6.0/MDB08L
MMB29N from MDB08L - https://android.googleapis.com/pack...538f7851.signed-angler-MMB29N-from-MDB08L.zip (Telstra Only)
------------------------------------------------------------
MDB08L from MDA89D - https://android.googleapis.com/pack...2373263f.signed-angler-MDB08L-from-MDA89D.zip
MDB08L from MDB08K - https://android.googleapis.com/pack...341b4028.signed-angler-MDB08L-from-MDB08K.zip
MDB08M from MDB08K - Need link! (Korea Only)
------------------------------------------------------------
MDB08K from MDA89D - https://android.googleapis.com/pack...519ae31a.signed-angler-MDB08K-from-MDA89D.zip
SPECIAL THANKS:
El Daddy
Tang034
bongostl
xdatastic
@oldblue910 What information do you want from this device?
From the about screen:
Version: 6.0
Baseband: .2.6.1.c4-00004-M8994FAAAANAZM-1
Kernel: 3.10.73-g9b6596d Sept 26
Build: MDA89D
There has been not OTA to MDB08K yet, but if I get it, I will grab the link.
Tang034 said:
@oldblue910 What information do you want from this device?
From the about screen:
Version: 6.0
Baseband: .2.6.1.c4-00004-M8994FAAAANAZM-1
Kernel: 3.10.73-g9b6596d Sept 26
Build: MDA89D
There has been not OTA to MDB08K yet, but if I get it, I will grab the link.
Click to expand...
Click to collapse
Thank you very much! Yes, please post the URL when you get it.
I received this ota... Is there still any way to pull it?
@bongostl Only if you haven't rebooted to do the actual install. If you have rebooted, it is too late.
Follow these instructions from http://forum.xda-developers.com/nexus-6/general/ref-nexus-6-stock-ota-urls-t2906493/post56859170
6. Enable developer options on your phone by going back to Settings | About Phone and repeatedly tapping on the build number until it says "you're a developer."
7. Go into Settings | Developer Options and enable USB debugging.
8. Check for a system update. Once it downloads, DO NOT INSTALL IT YET.
9. Go to Settings | Developer Options and choose "Take Bug Report".
9. After a few minutes, you'll get a text file emailed to your gmail account.
10. Open that text file and search it for ".zip" (without the quotes).
11. Please post the entire URL here. It'll start with "https://android.googleapis.com/packages/ota/"
https://android.googleapis.com/pack...519ae31a.signed-angler-MDB08K-from-MDA89D.zip
---------- Post added at 07:34 PM ---------- Previous post was at 07:32 PM ----------
That is the ota file. If you are on the older build, DL that to your phone, boot to bootloader, select recovery, find power and tap volume up, then select to flash a local file. Point it at said file, and you're good to go!
This will ONLY work on a stock, unmodified system
bongostl said:
https://android.googleapis.com/pack...519ae31a.signed-angler-MDB08K-from-MDA89D.zip
---------- Post added at 07:34 PM ---------- Previous post was at 07:32 PM ----------
That is the ota file. If you are on the older build, DL that to your phone, boot to bootloader, select recovery, find power and tap volume up, then select to flash a local file. Point it at said file, and you're good to go!
This will ONLY work on a stock, unmodified system
Click to expand...
Click to collapse
I'm having problems flashing that. I've never used stock recovery before but it seems straightforward. Unfortunately it doesn't recognise the internal sd card so I can't select the file.
bongostl said:
https://android.googleapis.com/pack...519ae31a.signed-angler-MDB08K-from-MDA89D.zip
---------- Post added at 07:34 PM ---------- Previous post was at 07:32 PM ----------
That is the ota file. If you are on the older build, DL that to your phone, boot to bootloader, select recovery, find power and tap volume up, then select to flash a local file. Point it at said file, and you're good to go!
This will ONLY work on a stock, unmodified system
Click to expand...
Click to collapse
Thanks! First post updated.
Tang034 said:
@oldblue910 What information do you want from this device?
From the about screen:
Version: 6.0
Baseband: .2.6.1.c4-00004-M8994FAAAANAZM-1
Kernel: 3.10.73-g9b6596d Sept 26
Build: MDA89D
There has been not OTA to MDB08K yet, but if I get it, I will grab the link.
Click to expand...
Click to collapse
Did you happen to get the bootloader version as well before you updated to MDB08K?
I couldn't point to the file from recovery either... Any idea if the update will initiate normally again, or is it forever missed?
worst case you use the link to download the ota to your computer and then flash using adb.
Looks like that flash via sdcard running/or meant to run for us. ....yet
@oldblue910 I didn't upgrade yet. Never got the OTA, and haven't sideloaded anything.
Here you go:
BL: angler-01.31
Baseband: angler-01.29
https://android.googleapis.com/pack...341b4028.signed-angler-MDB08L-from-MDB08K.zip
McChen147 said:
https://android.googleapis.com/pack...341b4028.signed-angler-MDB08L-from-MDB08K.zip
Click to expand...
Click to collapse
Thank you! I was wondering why every single person who was getting the update was posting about getting it, yet no one decided to pull the OTA url lol
I've been using my 6P for a day now and I'm still on MDA89D.
Sent from my Nexus 6P using Tapatalk
OTA URL for MDB08L from MDB08K
https://android.googleapis.com/pack...341b4028.signed-angler-MDB08L-from-MDB08K.zip
Thanks everyone for all the links. Monday I'll get caught up and get everything updated both here and on randomphantasmagoria.com
Sent from my iPhone using Tapatalk
When I go into recovery mode I just get the android guy on his back
stkman32 said:
When I go into recovery mode I just get the android guy on his back
Click to expand...
Click to collapse
press and hold volume up and power.
Here is the OTA URL for MDB08L from MDA89D. Just got it on my device.
/packages/ota/google_angler_angler/2fe476ac5d6c9dc79a63b0a2b877ce562373263f.signed-angler-MDB08L-from-MDA89D.zip
https://android.googleapis.com/pack...2373263f.signed-angler-MDB08L-from-MDA89D.zip
Related
i had just purchased a Verizon galaxy s4 from ebay and found out that its rooted .. Its got the hyperdrive rls10.2 on it and now it says there is a new version 12 I downloaded it . Ive read many threads on here and still cant figure out how to install the new version. Baseband version is vruamdk and the build is vruame7 . can someone point me in the right direction on how to update the new rom .im assuming it has the files on it already to backup etc what I need ... any info would be helpful
thanks
torchdown2011 said:
i had just purchased a Verizon galaxy s4 from ebay and found out that its rooted .. Its got the hyperdrive rls10.2 on it and now it says there is a new version 12 I downloaded it . Ive read many threads on here and still cant figure out how to install the new version. Baseband version is vruamdk and the build is vruame7 . can someone point me in the right direction on how to update the new rom .im assuming it has the files on it already to backup etc what I need ... any info would be helpful
thanks
Click to expand...
Click to collapse
I have deleted my stupidity
DO NOT update to MJ7. You are very lucky to have gotten an MDK phone. Read the Hyperdrive thread, I believe flashing instructions are in the first post. With an MDK phone you'll be able to flash any Verizon S4 ROM, including AOSP builds, if you so choose.
thunderbls said:
You would need to update your build to mj7 the newer version is based on 4.3 not 4.2 http://forum.xda-developers.com/showthread.php?t=2579278 and just to make sure your build is Me7 and the baseband says ...mdk?
---------- Post added at 08:28 AM ---------- Previous post was at 08:22 AM ----------
http://forum.xda-developers.com/showthread.php?t=2565758. For root afterwords
---------- Post added at 08:30 AM ---------- Previous post was at 08:28 AM ----------
Lol forget quick post for root... already included in first link... sorry lol
Click to expand...
Click to collapse
yes build is me7 and base is mdk
torchdown2011 said:
yes build is me7 and base is mdk
Click to expand...
Click to collapse
Leave your mdk base alone..you have a diamond. Just educate yourself
Sent from my SCH-I545 using XDA Premium 4 mobile app
spotmark said:
DO NOT update to MJ7. You are very lucky to have gotten an MDK phone. Read the Hyperdrive thread, I believe flashing instructions are in the first post. With an MDK phone you'll be able to flash any S4 ROM, including AOSP builds, if you so choose.
Click to expand...
Click to collapse
is that the first page where says to
1. You MUST READ Through the Entire first page of the Thread
2.You MUST be ROOTED
3. You MUST have a custom recovery installed!
For Verizon Users
FOR MDK Unlocked Phones (TWRP/CWM)
1. Download latest Hyperdrive Rom version
2. Reboot into Recovery
3. Wipe Data/Factory Reset
4. Wipe cache and dalvik cache
5. Install Rom
6. Reboot (First Boot may take up to 10 mins)
7. Let Phone sit for 10 minutes
8. Reboot again
9 Enjoy!
As said DO NOT UPDATE. Read up on loki. Your phone is rare in that it still has the original software on it, its the only one that has an exploit to bypass the bootloader. If you update you could lose custom recovery forever.
thunderbls said:
You would need to update your build to mj7 the newer version is based on 4.3 not 4.2 http://forum.xda-developers.com/showthread.php?t=2579278 and just to make sure your build is Me7 and the baseband says ...mdk?
---------- Post added at 08:28 AM ---------- Previous post was at 08:22 AM ----------
http://forum.xda-developers.com/showthread.php?t=2565758. For root afterwords
---------- Post added at 08:30 AM ---------- Previous post was at 08:28 AM ----------
Lol forget quick post for root... already included in first link... sorry lol
Click to expand...
Click to collapse
Thunderbls, please edit your post, so people don't mess up their phones.
Already done and appropriately annotated as well.
spotmark said:
Thunderbls, please edit your post, so other people don't take your advice.
Click to expand...
Click to collapse
ok I wont update it . as you all can tell just a newbie trying to learn . all your input is thankful..
ive only had the phone for 2 months so real new to me
torchdown2011 said:
ok I wont update it . as you all can tell just a newbie trying to learn . all your input is thankful..
ive only had the phone for 2 months so real new to me
Click to expand...
Click to collapse
Don't rush into anything and take the necessary time.
sent by safestrap
thunderbls said:
I have deleted my stupidity
Click to expand...
Click to collapse
torchdown2011 said:
ok I wont update it . as you all can tell just a newbie trying to learn . all your input is thankful..
ive only had the phone for 2 months so real new to me
Click to expand...
Click to collapse
If your s4 is mdk turn off and boot to recovery by holding volume up and power...if its mdk and running hyperdrive you should already have custom recovery installed...if so you can run pretty much anything available...do some reading and learn up...post your recovery version here...it may not be up to date...older versions work well but don't always play nice with newer ROMs...if you need any help just ask...I myself as well as many others are more than willing to help...if you don't know ask...you don't wanna brick an mdk as chances are you won't find another one
mdk
decaturbob said:
Don't rush into anything and take the necessary time.
sent by safestrap
Click to expand...
Click to collapse
sorry to keep being a bother TWRP/CWM) where would I find this on my phone and I got a private messege saying do this
For Verizon Users
FOR MDK Unlocked Phones (TWRP/CWM)
1. Download latest Hyperdrive Rom version
2. Reboot into Recovery
3. Wipe Data/Factory Reset
4. Wipe cache and dalvik cache
5. Install Rom
6. Reboot (First Boot may take up to 10 mins)
7. Let Phone sit for 10 minutes
8. Reboot again
9 Enjoy!
not sure if this would be the right thing to do any input back would be appreciated
thanks
jamesd1085 said:
If your s4 is mdk turn off and boot to recovery by holding volume up and power...if its mdk and running hyperdrive you should already have custom recovery installed...if so you can run pretty much anything available...do some reading and learn up...post your recovery version here...it may not be up to date...older versions work well but don't always play nice with newer ROMs...if you need any help just ask...I myself as well as many others are more than willing to help...if you don't know ask...you don't wanna brick an mdk as chances are you won't find another one
Click to expand...
Click to collapse
how do I find out what recovery version I have??
torchdown2011 said:
how do I find out what recovery version I have??
Click to expand...
Click to collapse
Install ROM Manager, from the market. When you open it, it will tell you what recovery you're on. Or just boot into recovery.
spotmark said:
Install ROM Manager, from the market. When you open it, it will tell you what recovery you're on. Or just boot into recovery.
Click to expand...
Click to collapse
ok says its clockworkMod recovery 6.0.3.2 and says a newer version of 6.0.4.4 is available
torchdown2011 said:
ok says its clockworkMod recovery 6.0.3.2 and says a newer version of 6.0.4.4 is available
Click to expand...
Click to collapse
Most likely the advanced reboot menu is active. Press and hold the power button. If there is a reboot to recovery, press it. If not, press reboot. If a new menu pops up, press recovery. If not. Power off. Now his the up volume button and press power until it starts up. Then let go of just the power button until some tiny blue writing shows up in the upper left. Then let go of the volume button and wait for the recovery to boot.
Then MAKE A BACKUP. Select that option and do it with the default settings.
Keep your phone plugged in.
Then install the V12 you downloaded. It's aroma so it will step you through.
And keep reading everything you can.
Sent from my SCH-I545 using XDA Premium HD app
brizey said:
Most likely the advanced reboot menu is active. Press and hold the power button. If there is a reboot to recovery, press it. If not, press reboot. If a new menu pops up, press recovery. If not. Power off. Now his the up volume button and press power until it starts up. Then let go of just the power button until some tiny blue writing shows up in the upper left. Then let go of the volume button and wait for the recovery to boot.
Then MAKE A BACKUP. Select that option and do it with the default settings.
Keep your phone plugged in.
Then install the V12 you downloaded. It's aroma so it will step you through.
And keep reading everything you can.
Sent from my SCH-I545 using XDA Premium HD app
Click to expand...
Click to collapse
I get this messege
error while making a backup image of system when trying to do the backup
torchdown2011 said:
I get this messege
error while making a backup image of system when trying to do the backup
Click to expand...
Click to collapse
and now says memory full not able to receive messeges
in dire need of help
Welcome to the MDK master race!
Depending in which recovery you want to use CWM or Team Win. Most likely it has a recovery already installed, go to the power menu and pick recovery mode, you boot to the recovery.
You can update to the latest modem via the modem thread.
Rom build and baseband are different thinks when on the MDK version.
Like someone said here dont upgrade to any other version example MJ7.
The only thinkvyour ever going to need to upgrade to the latest greatest Rom/Android version is your recovery.
Educate yo self!!#
Sent from my SCH-I545 using xda app-developers app
---------- Post added at 03:02 PM ---------- Previous post was at 02:59 PM ----------
Phillz Touch Base is the go to CWM for Verizon imho its in the Development Thread. You can update any recovery by just downloading the zip file and flashing it with the older one.
Sent from my SCH-I545 using xda app-developers app
Galaxy S5 Sport SM-G860P Stock Roms
OH1 stock Lollipop Kernel added to the bottom of this post!
Kitkat 4.4.2 NG3 Stock Deodexed ROM
This is a base test version.
Someone please backup, flash with custom recovery and let me know how it goes in case I need to make some further changes.
Download Link -- > SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip
Deodexed Rom Features (so far):
- root included
- busybox
- init.d support/repacked kernel
Full Stock Tar Recovery
Restore the phone back to stock.
Download Link -- > G860PVPU1ANG3_G860PSPT1ANG3_SPR.zip
Custom Recovery:
Flash custom roms and mods.
[RECOVERY] CWM S5 Sport SM-G860P
Instructions to Install Tar Files with Odin
• The full tar does not wipe Data or internal SD.
You may want to do a full wipe in custom recovery before flashing full tar if you have issues with data apps.
• Extract (unzip) the firmware file
• Extract Odin -- Odin v3.09 Download Link
• Power down the phone (or pull the battery, it is important to flash the OTA from a powered off state)
• Open Odin v3.09
• Boot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the firmware/recovery file to AP / PDA (depending on version of Odin)
• For modems, add the file to CP / PHONE (depending on version of Odin)
• Make sure re-partition is NOT ticked
• Click the start button, sit back and wait a few minutes
I think its possible to flash a Sprint SM-G900P 4.4.2 rom on this phone if you follow the following steps:
1. Have custom recovery already installed and a backup in place in case you need to flash back.
2. Place the rom and stock kernel on phone SD
3. Boot into custom recovery, do a full wipe
4. Install the SM-G900P touchwiz based rom, do not reboot yet
5. Flash the stock SM-G860P _NG3_Stock_Kernel.zip provided in Post #1.
6. Restart the phone
@SeanRinVA and @wolfleatherworks :
You guys have showed interest in getting MOAR on your SM-G860P phones, so I thought I'd mention you here to help you find this thread. Make sure to have a nanoid backup beforehand and let everyone know how it went.
I'd watched the MOAR thread for a while, but it wasn't compatible with the SM-G860P (hung boot).
Sent from my SM-G860P using Tapatalk
SeanRinVA said:
I'd watched the MOAR thread for a while, but it wasn't compatible with the SM-G860P (hung boot).
Sent from my SM-G860P using Tapatalk
Click to expand...
Click to collapse
@tdunham just posted this yesterday and the second post this morning, but yes, he's looking for someone to test it (neither of us have the G860). If you have the time, could you give this a try and post back success or failure? Especially if you can get MOAR installed.
Ramer said:
@tdunham just posted this yesterday and the second post this morning, but yes, he's looking for someone to test it (neither of us have the G860). If you have the time, could you give this a try and post back success or failure? Especially if you can get MOAR installed.
Click to expand...
Click to collapse
I can test it tonight. I've downloaded the Kernel...now to download the latest MOAR.
I've got an S5 Sport, just picked up today. Will be testing the kernel with MOAR.
---------- Post added at 08:32 PM ---------- Previous post was at 07:58 PM ----------
Well it doesn't seem to be boot looping, I'll let it sit and cook for a bit longer. Currently it's just flashing the android white text and disappearing, not sure how long it should normally be on 1st boot.
---------- Post added at 08:46 PM ---------- Previous post was at 08:32 PM ----------
Doesn't seem to have worked, I waited a good while but it didn't go any further. Attempted downloading your Rooted Deodexed test but it downloads as a 0kb file.
EDIT: Tried another mirror, seems to be downloading properly now.
---------- Post added at 09:34 PM ---------- Previous post was at 08:46 PM ----------
Got it downloaded, copied over via adb -- attempted install, getting (bad) - installation aborted.
---------- Post added at 09:42 PM ---------- Previous post was at 09:34 PM ----------
Confirmed MD5 match. Ideas?
KrimsonStarfly said:
Doesn't seem to have worked, I waited a good while but it didn't go any further. Attempted downloading your Rooted Deodexed test but it downloads as a 0kb file.
EDIT: Tried another mirror, seems to be downloading properly now
Got it downloaded, copied over via adb -- attempted install, getting (bad) - installation aborted.
Click to expand...
Click to collapse
I'm not sure what adb was for. You don't have drivers installed with a running rom so you can copy everything over to the phone?
Did you download the stock rom last night because the stock rom last night had a problem and has since been replaced. The one you should have the same name as the link in the OP. I even flashed it to make sure it would at least run.
tdunham said:
I'm not sure what adb was for. You don't have drivers installed with a running rom so you can copy everything over to the phone?
Did you download the stock rom last night because the stock rom last night had a problem and has since been replaced. The one you should have the same name as the link in the OP. I even flashed it to make sure it would at least run.
Click to expand...
Click to collapse
I was using ADB since I didn't want to restore from backup until I was done testing. I'll try re-downloading and doing it over again to see if I can get it working, I'm off work today so now is the perfect time to try it further.
So this has me stumped -- For some unknown reason, I seem to be unable to copy over SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip using MTP. I fiddled with drivers for the last hour and i'm at a loss -- it doesn't seem to be a driver problem, I can copy over MOAR and other files, but it won't let me copy over your test at all.
tdunham said:
I think its possible to flash a Sprint SM-G900P 4.4.2 rom on this phone if you follow the following steps:
1. Have custom recovery already installed and a backup in place in case you need to flash back.
2. Place the rom and stock kernel on phone SD
3. Boot into custom recovery, do a full wipe
4. Install the SM-G900P touchwiz based rom, do not reboot yet
5. Flash the stock SM-G860P _NG3_Stock_Kernel.zip provided in Post #1.
6. Restart the phone
Click to expand...
Click to collapse
Ramer said:
@tdunham just posted this yesterday and the second post this morning, but yes, he's looking for someone to test it (neither of us have the G860). If you have the time, could you give this a try and post back success or failure? Especially if you can get MOAR installed.
Click to expand...
Click to collapse
works booted up with moar rom :good:
---------- Post added at 09:39 PM ---------- Previous post was at 09:33 PM ----------
tdunham said:
Galaxy S5 Sport SM-G860P Stock Roms
Kitkat 4.4.2 NG3 Stock Deodexed ROM
This is a base test version.
Someone please backup, flash with custom recovery and let me know how it goes in case I need to make some further changes.
Download Link -- > SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip
Deodexed Rom Features (so far):
- root included
- busybox
- init.d support/repacked kernel
Full Stock Tar Recovery
Restore the phone back to stock.
Download Link -- > G860PVPU1ANG3_G860PSPT1ANG3_SPR.zip
Custom Recovery:
Flash custom roms and mods.
[RECOVERY] CWM S5 Sport SM-G860P
Instructions to Install Tar Files with Odin
• The full tar does not wipe Data or internal SD.
You may want to do a full wipe in custom recovery before flashing full tar if you have issues with data apps.
• Extract (unzip) the firmware file
• Extract Odin -- Odin v3.09 Download Link
• Power down the phone (or pull the battery, it is important to flash the OTA from a powered off state)
• Open Odin v3.09
• Boot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the firmware/recovery file to AP / PDA (depending on version of Odin)
• For modems, add the file to CP / PHONE (depending on version of Odin)
• Make sure re-partition is NOT ticked
• Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
i tried SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip but it aborted and said bad could be the . between DEODEXED and TEXT i try to rename but then it wouldnt let me put it on my phone. just a though
1991mustang50 said:
works booted up with moar rom :good:
---------- Post added at 09:39 PM ---------- Previous post was at 09:33 PM ----------
i tried SM-G860P_NG3_ROOTED_DEODEXED.TEST.zip but it aborted and said bad could be the . between DEODEXED and TEXT i try to rename but then it wouldnt let me put it on my phone. just a though
Click to expand...
Click to collapse
I accidentally added a space in the filename. I did flash it to test but now I think I removed the space in the name before doing so. If possible, try downloading to pc first and let me know how it goes in case I need to reupload it to the hosting site with a corrected filename.
1991mustang50 said:
works booted up with moar rom :good:
Click to expand...
Click to collapse
So, I'm not attempting to be dumb here, but it might be inevitable.
G900 stock roms boot with G860 kernel?
I use MOAR ROM(havent tried any other roms yet) for 900P and the the kernel zip in post #1 and using steps in post #2 I am running on it now
Great. Being a stock-based ROM, I would imagine that all stock Roms work with G860 kernel. Consequently, all AOSP ROMs should work with a kernel compiled for G860. There are 2 new G860s in the house and my intent was to compile CM11/12 for the Sport; however, if all that is necessary is the kernel&modules I won't bother pulling blobs.
Thanks. The phones aren't entirely at my disposal or I would do more testing.
tdunham said:
I accidentally added a space in the filename. I did flash it to test but now I think I removed the space in the name before doing so. If possible, try downloading to pc first and let me know how it goes in case I need to reupload it to the hosting site with a corrected filename.
Click to expand...
Click to collapse
Redownloaded still a no go it just go to opening update and then fails sorry for bad news thanks for trying
It works!
I used the instructions here to install the rom for the G900P as linked to below. I've messed with it only for about 20 minutes but it worked perfectly fine! So much bloatware though, and I'm coming from the S3 scene and am not too familiar with what the G900P had to offer in terms of custom ROMs. If anyone knows a good lightweight one with powerful customization options please let me know so I can try it. I am doing my first backup of this ROM as I type this and will also be doing a restore of my previous ROM (stock with the bloatware removed manually) for now and will probably tweak the MOAR ROM more later this week. Just want to say thank you to everyone in this thread, you guys are amazing!
http://forum.xda-developers.com/showthread.php?t=2790808
I'm going to give the MOAR of try with the kernel from post one.. I really do hope that more development comes to this phone..
doubledragon5 said:
I'm going to give the MOAR of try with the kernel from post one.. I really do hope that more development comes to this phone..
Click to expand...
Click to collapse
Well, at least you guys can run a custom rom now.
I wish I could be more help but I have the SM-G900P but thought I'd take a shot at getting the Sport a little help.
tdunham said:
Well, at least you guys can run a custom rom now.
I wish I could be more help but I have the SM-G900P but thought I'd take a shot at getting the Sport a little help.
Click to expand...
Click to collapse
I saw a couple of links in the recovery thread for the sport full resotore.. One link the files are over a gig, the other one is for about 848mb.. I wounder which is the real deal... The first link I could not download crap, but the second one I did. BTW is the modem included in your file for your rom?I was woundering because if I flash MOAR were can I find the modem or does it matter
Introduction
Hello this is my first ROM thought I would share. It is built straight from source. Will be adding cherry-picks along the way. Feel free to ask questions. I will try to answer them. If not will search diligently to help you.
*** Disclaimer
Not responsible if phone blows up etc,ect,ect.
Features
Battery style options
Weather in status bar
Navigation bar height
Search bar in recents
Ad Blocker
Animation options
Gesture Anywhere
App circle bar
LCD Density
Quick setting
Status bar setting
Left handed mode
Power button ends call
Volume button options
Privacy setting
many more!!!
Installation instructions
1. Download ROM
2. Download GAPPS
3. Download SuperSu
4. Boot into recovery
5. Full wipe (Dalvik Cache, Cache, Data, System, Factory Data Reset)
6. Flash Rom
7. Flash Gapps
8. Flash SuperSu
9. Reboot and Enjoy
Upgrade instructions
1. Download ROM
2.Reboot into recovery
3.Dirty flash
4.Reboot and Enjoy
Changelog
3rd post
Downloads
ROM
Gapps
Supersu
FAQ
1.Built straight from source
2. Will try to keep updated
3. Any request send me a PM
4.Hope you enjoy
If you like my work please consider a donation to help buy new computer parts thanks.
Log into paypal and my email address [email protected]
XDA:DevDB Information
AICP-5.0.2-unofficial, ROM for the Google Nexus 5
Contributors
dude1981, scrosler,GROGG88,know.patience,GOOGLE
Source Code: https://github.com/AICP
ROM OS Version: 5.0.x Lollipop
Based On: AICP
Version Information
Status: Beta
Current Beta Version: AICP 5.0.2
Beta Release Date: 2014-12-30
Created 2014-12-30
Last Updated 2015-01-04
reserved
Screenshots
one more
Changelog 2015-1-2
AICP offical changelog
http://mirror2.aicp-rom.com/hammerhead/NIGHTLY/aicp_hammerhead_lollipop-1.0RC0-NIGHTLY-20150102.zip.html
Will add my cherry picks when I put them in.
It's gonna be fun! Thanks
Screen shots? ?
If Someone Helped You Then Just Dont say Thanks...Hit The Thanks Button!
AICP! Do you have screenies?
Prattham said:
Screen shots? ?
If Someone Helped You Then Just Dont say Thanks...Hit The Thanks Button!
Click to expand...
Click to collapse
I have couple:
Sent from my Nexus 5
Do you have a mirror for the download?
Screenshots in second post.:good:
Great! I was looking for it. Where can I see all the features from official aicp?
Sent from my Nexus 5 using Tapatalk
FluffyFox20 said:
Do you have a mirror for the download?
Click to expand...
Click to collapse
Uploading mirror in op now.
dude1981 said:
Uploading mirror in op now.
Click to expand...
Click to collapse
Oh thank you so much c:
FluffyFox20 said:
Oh thank you so much c:
Click to expand...
Click to collapse
Mirror uploaded now.:good:
AvivEliyahu said:
Great! I was looking for it. Where can I see all the features from official aicp?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Look in features in op edited with features.
dude1981 said:
Mirror uploaded now.:good:
Click to expand...
Click to collapse
It still isn't working... ;c Sorry if I am troubling you.
---------- Post added at 09:35 PM ---------- Previous post was at 09:24 PM ----------
There we go! Ingot it.
FluffyFox20 said:
It still isn't working... ;c Sorry if I am troubling you.
---------- Post added at 09:35 PM ---------- Previous post was at 09:24 PM ----------
There we go! Ingot it.
Click to expand...
Click to collapse
So u got it?
dude1981 said:
So u got it?
Click to expand...
Click to collapse
Yes I got it. You have to use Mega ( Beta ) on android.
Now I flashed through Multirom, and when it boots the Boot Logo stays until about 2 min later. Then I reboot, and then when the phone turns back on it skips the MultiRom boot screen and boots right into my Main ROM.
Is this ROM not made for MultuROM?
FluffyFox20 said:
Yes I got it. You have to use Mega ( Beta ) on android.
Now I flashed through Multirom, and when it boots the Boot Logo stays until about 2 min later. Then I reboot, and then when the phone turns back on it skips the MultiRom boot screen and boots right into my Main ROM.
Is this ROM not made for MultuROM?
Click to expand...
Click to collapse
No is not multurom compatible. Will try to make compatible next update
I keep getting "unmount of /system failed; no such volume" when flashing.
I'm running TWRP. First time around, I had wiped Cache, Dalvik, System, and Data, then got stuck at the stock boot animation for 30+ minutes. Since then, I've done a full system format (twice, just to be sure), then wiped everything (again, just to be sure), then rebooted to recovery before using adb push to transfer the .zip files. Still same error, except this time I get the AICP boot animation for a few minutes, then a black screen.
I've been on a bit of a flashing rampage, and a few other ROMs gave me some errors in flashing, but they've all worked after a full system format. Any suggestions? I've searched around a bit, but everything seems vague/unrelated/broken links, and I'm just exhausted.
---------- Post added at 12:39 AM ---------- Previous post was at 12:31 AM ----------
Sorry, I don't know how the thumbs down icon go there, and I can't find any way to edit my post.
athraen said:
I keep getting "unmount of /system failed; no such volume" when flashing.
I'm running TWRP. First time around, I had wiped Cache, Dalvik, System, and Data, then got stuck at the stock boot animation for 30+ minutes. Since then, I've done a full system format (twice, just to be sure), then wiped everything (again, just to be sure), then rebooted to recovery before using adb push to transfer the .zip files. Still same error, except this time I get the AICP boot animation for a few minutes, then a black screen.
I've been on a bit of a flashing rampage, and a few other ROMs gave me some errors in flashing, but they've all worked after a full system format. Any suggestions? I've searched around a bit, but everything seems vague/unrelated/broken links, and I'm just exhausted.
---------- Post added at 12:39 AM ---------- Previous post was at 12:31 AM ----------
Sorry, I don't know how the thumbs down icon go there, and I can't find any way to edit my post.
Click to expand...
Click to collapse
WHAT version of TWRP are you using?
with very little activity lately for the LGV20, specifically the H918 T-Mobile variant, I created a TWRP flashable package for the recent H91810q release. this zip flash every partition included in the latest KDZ package with the exception of recovery to keep TWRP. standard disclaimer applies, you do all of this at YOUR OWN risk! because 10q is not rootable, you need to be root'd before flashing this! failure to do so will probably cause you to lose root and/or lose TWRP! and worst of all, because 10q can't be downgraded to 10j (last version where you can still obtain root via dirtycow) because of Anti-RollBack, you're fscked!
NOTE1: you can find the partitions that will be flashed in the updater-script. to be extra cautious you can back up all of the partitions that will be overwritten with the following: dd if=/dev/block/bootdevice/by-name/{partition} of=/external_sd/backup/{partition}.img.
NOTE2: boot partition has been modified only to remove rctd, nothing else so I consider this to still be stock
Instructions:
download H91810u.zip file listed below and put on microSD card
download your choice of root and put on microSD card, choose from either Magisk or SuperSU *Note: v12.0 of Magisk does not work with the LGV20 device in general and v14.0 is recommended.
backup any data from internal "SD card"
boot into TWRP (requires TWRP recovery to already be installed)
create a TWRP backup of the device
flash zip from microSD card by using "Install"
FLASH YOUR CHOICE OF ROOT - Flashing root is VERY IMPORTANT BEFORE REBOOTING!
reboot
profit!
Download:
H91810q.zip
old 10q md5sum: 8c2e76ded9759a63b1ffac86f3941649
new 10q md5sum: c7d4086b3a0a786d1501ef7e4ce22f32 - re-zipped in Linux for proper alignment
H91810r.zip
wrong 10r md5sum: 9e2e1f8c56079d7bf629ce5e375d7551 (this is actually the md5sum for the KDZ)
correct 10r md5sum: 194b2bc41aa6dbdd7b9a371392f7b930
H91810s.zip
10s md5sum: f187fdefe4c3612c5811e9fbeb0748c5
H91810t.zip - rctd and triton both disabled, previous versions only removed rctd
10t md5sum: b00c2f644b15eb15e459c48830caa5da
H91810u.zip - rctd and triton both disabled, previous versions only removed rctd
10u md5sum: f51b2b11a30dc448b0da0edc750bb587
Flashing Process (what flashing this zip does):
flash necessary partition images with the exception of recovery (to keep TWRP) from the KDZ
rename /system/recovery-from-boot.p to /system/recovery-from-boot.bak to prevent stock recovery from being installed on boot
wipes dalvik-cache and cache
BIG thanks to @McNutnut on guidance, as well as his script to put all of this together!
also thanks to @bullghost for the KDZ extractor (https://forum.xda-developers.com/showthread.php?t=2600575)
@Tilde88 for the original updater-script template w/root (https://forum.xda-developers.com/v20/development/us996-nrd90m-modded-notsostock-rom-v5-1-t3526542)
Awesome thanks.. I'm on it!
---------- Post added at 12:50 AM ---------- Previous post was at 12:07 AM ----------
Didn't work... Still shows 10p. I noticed the flash process was rather fast also.
storm68 said:
Awesome thanks.. I'm on it!
---------- Post added at 12:50 AM ---------- Previous post was at 12:07 AM ----------
Didn't work... Still shows 10p. I noticed the flash process was rather fast also.
Click to expand...
Click to collapse
Dude, thanks for whipping this out so fast! (TWSS) I will get right on making a debloated rom from this. Is it ARB 1?
So I HAVE to flash root? Sometimes I don't flash root because of my gear S3 watch.
I just flashed but still showing 10p. But the kernel info shows Sept 12. So the kernel is updated but wondering on why it still shows 10p on software info @ about phone.
storm68 said:
Awesome thanks.. I'm on it!
---------- Post added at 12:50 AM ---------- Previous post was at 12:07 AM ----------
Didn't work... Still shows 10p. I noticed the flash process was rather fast also.
Click to expand...
Click to collapse
hold on, let me re-zip and re-upload. I had used two different methods to add the files to the archive so I'm going to re-do it all with one method
texasaggie1 said:
Dude, thanks for whipping this out so fast! (TWSS) I will get right on making a debloated rom from this. Is it ARB 1?
So I HAVE to flash root? Sometimes I don't flash root because of my gear S3 watch.
Click to expand...
Click to collapse
yes, this is ARB1 and yes, root is needed if you want to stay root'd
As you can see the updater script shows install 10p.
storm68 said:
As you can see the updater script shows install 10p.
Click to expand...
Click to collapse
yep, for some reason using Windows to create zip files causes inconsistencies. I've zipped up everything in Linux this time and double checked the updater script to make sure everything is good to go and am uploading it as I type... I've already updated the OP with the new md5sum and the link should remain the same. I'll give a heads up once it's live
Ok thanks for your time. Appreciate it. ?
storm68 said:
Ok thanks for your time. Appreciate it.
Click to expand...
Click to collapse
done! uploaded and downloaded myself to verify everything is the correct one. this should bring you to 10q for everything... sorry for the troubles of flashing again. don't forget to flash root just in case lol
No problem. No apology needed being you really don't have to do this for the community. Thanks again.
Sorry if I'm asking an obvious question but when did t mobile release a new update? I thought the latest version was 10p???
Flashed... All good!
---------- Post added at 02:41 AM ---------- Previous post was at 02:40 AM ----------
Still_living714 said:
Sorry if I'm asking an obvious question but when did t mobile release a new update? I thought the latest version was 10p???
Click to expand...
Click to collapse
Mine came yesterday. Updater to 10q. If you haven't gotten it yet you will..
storm68 said:
Flashed... All good!
---------- Post added at 02:41 AM ---------- Previous post was at 02:40 AM ----------
Mine came yesterday. Updater to 10q. If you haven't gotten it yet you will..
Click to expand...
Click to collapse
Any big improvements that you can see?
i flashed and once i unlocked my phone, it kept saying process.android keeps stopping repeatedly. booted back into twrp to restore the backup i made in twrp and now the keeps rebooting to the lg screen. Can anybdoy help me out please. i was ww kernel and 10k
Still_living714 said:
Any big improvements that you can see?
Click to expand...
Click to collapse
I would have to wait and see. But first hand it's about the same as 10p no rctd.
---------- Post added at 04:02 AM ---------- Previous post was at 03:26 AM ----------
Lgv20user said:
i flashed and once i unlocked my phone, it kept saying process.android keeps stopping repeatedly. booted back into twrp to restore the backup i made in twrp and now the keeps rebooting to the lg screen. Can anybdoy help me out please. i was ww kernel and 10k
Click to expand...
Click to collapse
First of be advised that this is anti roll back. Once on it you can't go backwards to other older roms. In reference to your problem you'll have to do a battery pull. Put battery back in. Now hold down volume down and power button at the same time, when you see LG screen release power button for two seconds then push again holding down power. During all this never release volume down. Now you'll get a reset screen with yes and no option. Use volume key to choose yes, twice..... This will get you back to TWRP. In your case I wouldn't even bother with back up but you can try again if want. What I would do is flash something else that I know works. Then decide from there what to do... Maybe redownload again. May be corrupt some how. I assume your on h918. Hope so! Good luck.
storm68 said:
I would have to wait and see. But first hand it's about the same as 10p no rctd.
---------- Post added at 04:02 AM ---------- Previous post was at 03:26 AM ----------
First of be advised that this is anti roll back. Once on it you can't go backwards to other older roms. In reference to your problem you'll have to do a battery pull. Put battery back in. Now hold down volume down and power button at the same time, when you see LG screen release power button for two seconds then push again holding down power. During all this never release volume down. Now you'll get a reset screen with yes and no option. Use volume key to choose yes, twice..... This will get you back to TWRP. In your case I wouldn't even bother with back up but you can try again if want. What I would do is flash something else that I know works. Then decide from there what to do... Maybe redownload again. May be corrupt some how. I assume your on h918. Hope so! Good luck.
Click to expand...
Click to collapse
what do you recommend i flash
Lgv20user said:
what do you recommend i flash
Click to expand...
Click to collapse
Well we really don't know if your system went to 10q now, so........ You can try again. On both, the backup or 10q. Since you know now how to get to TWRP with battery pull you can try both, see what works. Try backup first. If it doesn't work you may have system in 10q now being you backed up a 10k system may not work now. If it doesn't try q again. If that doesn't work then download 10p or redownload 10q and side load on TWRP from computer. Then flash again. These are steps I would do.. if someone tells you different then it's your choice. Different ways for different things.
storm68 said:
Well we really don't know if your system went to 10q now, so........ You can try again. On both, the backup or 10q. Since you know now how to get to TWRP with battery pull you can try both, see what works. Try backup first. If it doesn't work you may have system in 10q now being you backed up a 10k system may not work now. If it doesn't try q again. If that doesn't work then download 10p or redownload 10q and side load on TWRP from computer. Then flash again. These are steps I would do.. if someone tells you different then it's your choice. Different ways for different things.
Click to expand...
Click to collapse
so 10q is showing up. i am having issues with the modem i believe because i dont get tmobile recepetion and as soon as i put into airplane mode, the error message stops.
I haven't tried the 10p weta kernel yet but it may not work being this stock kernel on 10q is updated to the September security patch. May try later today.
First off, thanks for keeping my beloved H918 alive!. Thought all future dev for the V20 was dead.
Now a question. Any timeframe on a debloated version? Not in a hurry mind you, just curious.
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
https://drive.google.com/open?id=1xTtsn6gcg4JEX2dYKPiXTWVhPiGPzIBn
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://androidfilehost.com/?fid=889964283620771190
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
UPDATE! New build has been released. It is CQL7. To get to that, flash BQK2 with Odin (linked above) then OTA from BQK2 to BQL5 then another OTA from BQL5 to CQL7.
BQK2 to BQL5: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-S2BQL5-UP
BQL5 to CQLB: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQL5-to-U2CQLB-UP
BRA8 to CRB8 https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS3BRA8-to-U3CRB8-UP
THIS WILL UPDATE YOUR BOOTLOADER TO V3, YOU CAN NOT DOWNGRADE
BQL5 Odin: https://samsung-firmware.org/download/Galaxy__Note8__/c7o0/VZW/N950USQS2BQL5/N950UOYN2BQL5/
Oh just a side note, this may be unstable and crash, you have been warned.
This is a discord server with things as they come out. discord.gg/4uxusu8
thanks to thesbros for making the website
(https://i.imgur.com/oBT3bTA.jpg)
(https://i.imgur.com/f8CU1IP.jpg)
mweinbach said:
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
I currently have an S8 on the Oreo beta and will be buying a Note8 this weekend because of this. I AM SO EXCITED!
Oh just a side note, this may be unstable and crash, you have been warned.
Click to expand...
Click to collapse
How does one go about flashing this? I'm currently on Sprints latest update
mweinbach said:
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
I currently have an S8 on the Oreo beta and will be buying a Note8 this weekend because of this. I AM SO EXCITED!
Oh just a side note, this may be unstable and crash, you have been warned.
Click to expand...
Click to collapse
And again thanks to ..... lol
This is the unlocked version ???
Sent from my SM-N950U1 using Tapatalk
Del
powerstroke said:
How does one go about flashing this? I'm currently on Sprints latest update
Click to expand...
Click to collapse
1. Download Odin and flash this https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
1.5 In CSC use HOME_CSC to keep data, normal to wipe
2. Download this file: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
3. If you have an SD card, transfer that to your Sd carz
4. Boot into recovery
5.SD: select update from sd card then select your OTA called update.zip
5.ADB: on your phone select sideload over adb then type adb sideload update.zip (replace that update.zip with full file directory)
nexus6r3plicant01 said:
This is the unlocked version ???
Sent from my SM-N950U1 using Tapatalk
Click to expand...
Click to collapse
N950U, so kinda but no, not really. If you set your CSC to A then yah, if not it has carrier bloat.
mweinbach said:
1. Download Odin and flash this https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
1.5 In CSC use HOME_CSC to keep data, normal to wipe
2. Download this file: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
3. If you have an SD card, transfer that to your Sd carz
4. Boot into recovery
5.SD: select update from sd card then select your OTA called update.zip
5.ADB: on your phone select sideload over adb then type adb sideload update.zip (replace that update.zip with full file directory)
Click to expand...
Click to collapse
I'm already on sprints latest. That ok or do I need to downgrade before doing update.zip in recovery? Any mirrors for U2CQL1? Every time I try to download, it fails
powerstroke said:
I'm already on sprints latest. That ok or do I need to downgrade before doing update.zip in recovery? Any mirrors for U2CQL1? Every time I try to download, it fails
Click to expand...
Click to collapse
You need to be on BQK2 as linked in OP
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
jaceypoo said:
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
Click to expand...
Click to collapse
Uploading a mirror as i type this.
jaceypoo said:
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
Click to expand...
Click to collapse
I seriously just got to about 750 mb downloaded of the file and it just stops and starts over. Can't get it downloaded? What the heck lol
I was at 12 percent and the same thing happened to me lol. I'll just wait for the mirror.
Somehow, after 4 attempts at downloading, it worked and only took ~5 mins. everything appears to be in the zip file. I loaded the BK2 file (never got cell signal, and had a lot of strange things in settings) and am applying the update now. Hopefully this doesn't screw up anything. with the BK2 my settings showed custom for the status though, so not sure if I just screwed myself out of Knox stuff.
---------- Post added at 10:14 PM ---------- Previous post was at 09:35 PM ----------
Looks like it's working, some things I noted:
I had a few strange apps in my service folder (BoA and some games)
Samsung connect was causing a bunch of force closures.
Even though I was on unlocked before this, I ended up on Verizon (my carrier).
Everything else seems normal, and had I done a wipe I'd probably be in even better shape. Might to a whole tomorrow.
Sent from my SM-N950U using Tapatalk
damn, this was sniffed out from the AT&T servers?
_Dennis_ said:
Somehow, after 4 attempts at downloading, it worked and only took ~5 mins. everything appears to be in the zip file. I loaded the BK2 file (never got cell signal, and had a lot of strange things in settings) and am applying the update now. Hopefully this doesn't screw up anything. with the BK2 my settings showed custom for the status though, so not sure if I just screwed myself out of Knox stuff.
---------- Post added at 10:14 PM ---------- Previous post was at 09:35 PM ----------
Looks like it's working, some things I noted:
I had a few strange apps in my service folder (BoA and some games)
Samsung connect was causing a bunch of force closures.
Even though I was on unlocked before this, I ended up on Verizon (my carrier).
Everything else seems normal, and had I done a wipe I'd probably be in even better shape. Might to a whole tomorrow.
Click to expand...
Click to collapse
Can u post some screenshots? Anything new in settings or design?
note3userr said:
Can u post some screenshots? Anything new in settings or design?
Click to expand...
Click to collapse
Settings is new some screen shots of it here
https://www.imgur.com/a/c0MJ2
Sent from my SM-N950U using Tapatalk
where is the odin for this? The link does not have Odin
technicalvampire said:
where is the odin for this? The link does not have Odin
Click to expand...
Click to collapse
Don't need odin for this, it's an OTA.
Just put it on your phone, and go to recovery mode and flash from update.zip or whatever.
Longcat14 said:
Don't need odin for this, it's an OTA.
Just put it on your phone, and go to recovery mode and flash from update.zip or whatever.
Click to expand...
Click to collapse
First part does...