I have Gear S TMobile version (R750T) .. I was trying to flash stock firmware (R750TUVU1AOA7_R750TTMB1AOA7_TMB) but is stopped and gave me this message
Firmware upgrade encountered an issue
Please select recovery mode in kies and try again
tried kies with no luck ... trying to connection :crying::crying::crying:
any hope ???
here is the Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> dzImage
<ID:0/003> dzImage-recovery
<ID:0/003> modules.img
<ID:0/003> rpm.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> sdi.mbn
<ID:0/003> tz.mbn
<ID:0/003> rootfs.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Screen shot
Update :
Tried to flash it with another firmware ... Now I'm stuck with Bootloop !!!!!
Please help
Related
Hello everybody. I have a Samsung Galaxy S4 factory unlocked.
A week ago I rooted my phone and changed the firmware to an Android Google Play Edition 4.4 Kitkat. Now, I would like to return to the official stock version. I downloaded the firmware from sammobile and other sources. When I try to flash using Odin, always get a FAIL. This is the ODIN messages history.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505VFGEMK2_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
I tried changing the USB port, uninstalling and instaling Kies, I used different root files, even I used a PIT file, following the steps in this thread (http://forum.xda-developers.com/showthread.php?t=1727443). I already check kies is not running on background. I tried with different Odin version (1.85, 3.04, 3.07 & 3.09)
I dont know how to fix this problem. Please if anyone can help me I really appreciate.
Thank you so much for all your replies.
Hey all,
My sch-i545 is stuck in download mode, cannot boot. I want to delete everything and start over.
I downloaded the stock 5.0.1 rom, which what i believe was on it before it soft bricked, and every time I try to run odin with the md5 the program becomes unresponsive. Any ideas???
Download this one. It's official stock:
ODIN v3.10:
https://drive.google.com/file/d/0B4RU_ZH5QUASNmxLX3JpejBXREE/view?usp=docslist_api
OC1 image:
https://drive.google.com/file/d/0B4RU_ZH5QUASaU9LcDJ3WWZfdXM/view?usp=docslist_api
Sent from my SCH-I545 using Tapatalk
Thank you for the file. so this time it does not crash odin, but now it says complete write operation failed.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUGOC1_I545VZWGOC1_CL4584173_QB4517016_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Try to use 3.09. It's the only one that worked for me.
Odin 3.0.9 seems to work better, but it fails at a certain point per below.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUGOC1_I545VZWGOC1_CL4584173_QB4517016_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> persdata.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Any thoughts? :-\
You'll want to flash the first link in this one:
http://forum.xda-developers.com/gal...pment/odin-i545vrugoc1-factory-image-t3160125
What you are trying to flash is a ROM someone put together I believe. It's not the exact factory image and is probably not wiping all the bad files.
Thank you for the help so far, but I still have the same problem with writing. It fails after about 7 minutes.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUGOC1_I545VZWGOC1_I545VRUGOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Any ideas? :-\
Download the PIT file and flash that along with the ROM
Sent from my draconis using Tapatalk
I have a pit file from December 2013, the only one I could find. Still have no luck getting it to flash when using that PIT
Any ideas?
Nanometer45 said:
Any ideas?
Click to expand...
Click to collapse
Are you using the stock USB cable you know the Samsung one?
I tried 3 different cables. the one that worked? The USB cable I just got for my S6. Thanks for your help!
Guys I flashed my SM-G531H / DL whit this Fiemware (G531HVJU0APC2_G531HZTO0APC1_G531HUBU0APC1)
and now I have this problem,my Phone is brick can you tell me what Firmware can I use to Desbrick my phone?
thx in advance.
It say that After the flash with odin and this Rom
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> SPRDCP.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
pacoelo said:
Guys I flashed my SM-G531H / DL whit this Fiemware (G531HVJU0APC2_G531HZTO0APC1_G531HUBU0APC1)
and now I have this problem,my Phone is brick can you tell me what Firmware can I use to Desbrick my phone?
thx in advance.
Click to expand...
Click to collapse
Are you sure it is the correct firmware?
You can try this link i created a thread about fail after hidden.img but u can try the something instead of doing steps on hidden.img do for SPRDCP.img. if u dont understand ask me
https://forum.xda-developers.com/grand-prime/help/guide-odin-failed-flashing-stock-t3514810
Becareful
Maybe is baseband G531HUBUAOJ2
My Samsung Galaxy S5 SM-G900T has failed to flash any firmware for the better part of the past year. No matter which official ROM or which OS version is used (Kit Kat to Marshmallow), the failure continues to occur at Modem.bin. I've tried flashing the modem separately and receive the same error. Due to the incomplete flashing, the phone boots up and remains stuck on the Galaxy screen.
Background: I bought the phone used from a Craigslist user. I brought it to a Samsung "tech" at Best Buy to have an issue worked out; he proceeded to soft brick the phone by attempting to upgrade from Kit Kat to Marshmallow.
I've tried turning off Kies in the background and starting Odin (3.11) in Admin mode, both to no avail. I don't have the original OEM USB cord; I bought one on eBay and used it but had no luck.
Here is the log for trying to flash the modem from the G900TUVU1GQC2_G900TTMB1GQC2_TMB build by itself:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
Here is the log from trying to flash the entire G900TUVU1GQC2_G900TTMB1GQC2_TMB firmware build:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be greatly appreciated. I've already migrated to another phone but would love to restore this S5 to functionality.
crnel said:
My Samsung Galaxy S5 SM-G900T has failed to flash any firmware for the better part of the past year. No matter which official ROM or which OS version is used (Kit Kat to Marshmallow), the failure continues to occur at Modem.bin. I've tried flashing the modem separately and receive the same error. Due to the incomplete flashing, the phone boots up and remains stuck on the Galaxy screen.
Background: I bought the phone used from a Craigslist user. I brought it to a Samsung "tech" at Best Buy to have an issue worked out; he proceeded to soft brick the phone by attempting to upgrade from Kit Kat to Marshmallow.
I've tried turning off Kies in the background and starting Odin (3.11) in Admin mode, both to no avail. I don't have the original OEM USB cord; I bought one on eBay and used it but had no luck.
Here is the log for trying to flash the modem from the G900TUVU1GQC2_G900TTMB1GQC2_TMB build by itself:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
Here is the log from trying to flash the entire G900TUVU1GQC2_G900TTMB1GQC2_TMB firmware build:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be greatly appreciated. I've already migrated to another phone but would love to restore this S5 to functionality.
Click to expand...
Click to collapse
Are you sure its the G900T? There are 2 Galaxy S5's for t-mobile..The G900T and the G900T3...When you put it into download mode,it will say at the top which one it is.
bobbylo said:
Are you sure its the G900T? There are 2 Galaxy S5's for t-mobile..The G900T and the G900T3...When you put it into download mode,it will say at the top which one it is.
Click to expand...
Click to collapse
Yes, it says G900T in download mode.
crnel said:
Yes, it says G900T in download mode.
Click to expand...
Click to collapse
Have you tryed just flashing the modem files?What bootloader are you on? I have modem files on my page -->https://forum.xda-developers.com/tmobile-galaxy-s5/general/recent-odin-flashable-bootloaders-t3574276
EDIT:Just noticed,you built this flashable modem yourself?The sequence of flashing does'nt look right...Try flashing the bootloader and modem from my page..And see what happens
bobbylo said:
Have you tryed just flashing the modem files?What bootloader are you on? I have modem files on my page -->https://forum.xda-developers.com/tmobile-galaxy-s5/general/recent-odin-flashable-bootloaders-t3574276
EDIT:Just noticed,you built this flashable modem yourself?The sequence of flashing does'nt look right...Try flashing the bootloader and modem from my page..And see what happens
Click to expand...
Click to collapse
I tried flashing the bootloader and modem via Odin 3.11.1 and got the following:
<ID:0/004> Added!!
<ID:1/005> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> rpm.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> sdi.mbn
<ID:0/005> tz.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
crnel said:
I tried flashing the bootloader and modem via Odin 3.11.1 and got the following:
<ID:0/004> Added!!
<ID:1/005> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> rpm.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> sdi.mbn
<ID:0/005> tz.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
Click to expand...
Click to collapse
OK,just a few things...Have you tryed with a different version of Odin? I'm using odin 3.11.2 on mine..Try that one,then try Version 3.07.Also,in your log,why does it keep adding and removing?Is the usb loosing connection?Also,try removing the battery for a minute,then boot into download mode...Could also be bad cables,i had 2 bad one's once,and it drove me nuts till i got another one...Let me know how it works out after trying these things
So I go to flash twrp with Odin and then after SetupConnection it throws an error. Logs are here:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 9 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
.