Please Help me
I have grand 2. Stock rom 4.3 jelly bean. Rooted using kingroot apk.
And my device is ms103g. I repeat ms103g.
It has only one cwm recovery beta version.
I flashed it via odin.
After flashing a custom rom NOTE 4 ALPHA S6 PORT or ROM KK TECHMATE S ROM V1.0 4.4.2 NH3. It was flashed but when I reboot it stucks on boot logo.
After this I was switched off my mobile and rebooted to recovery. In mount section system and data are not mounted. I was remount it and reboot but nothing happened please help me how to flash custom rom. Or is there any other recovery. Thanks in advance. Sorry for my bad English.
Thos is not the right place to post there is @VECTUS please move this thread and u got bootloop bcoz u need to be on kitkat and u flashed on jellybean
How can I flashed kitkat or stock kitkat
I dont know how to move thread
vowels787 said:
How can I flashed kitkat or stock kitkat
Click to expand...
Click to collapse
Via odin
Related
Hi, I have updated and rooted my phone a while ago so I have forgotten a few things... I have CyanogenMod 9.1.0 and android version is 4.0.4... And now I came here and saw that there is android 4.2 and CM 10.1.... But I didn't found any information for updating between those two, there is only for coming from stock firmware. Can I just download 10.1 and install it from Clockwork mod or should I first update to 4.2 and how to do it?
Wipe data/factory reset after flashing the kernel for the new version and install the rom in cwm. All your data will be lost, but your phone should boot
Btw please ask questions in the Q&A forum
Sent from my Nexus 4 running Android 4.2.2
mihahn said:
Wipe data/factory reset after flashing the kernel for the new version and install the rom in cwm. All your data will be lost, but your phone should boot
Btw please ask questions in the Q&A forum
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
filipbg said:
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
Click to expand...
Click to collapse
Yes it's the same for all custom roms. Flash the kernel, boot in cwm and do the wipes, then flash the rom
Btw you could read my guide on how to install a custom rom/kernel to get more information. The link is in the "Roll up sticky thread" in the stickies in general forum :good:
Sent from my Nexus 4 running Android 4.2.2
filipbg said:
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
Click to expand...
Click to collapse
this is the manual way (automatic is SEUS ).. but to ur question yes, it so:
before installing rom, check which kernel needed for this (or if its inside zip, to flash BEFORE install; via fastboot..)
if u switch between stock ics & cm builds OR between cm9 and cm10(.1) FULL WIPE IS recommended!!
if u do only a upgrade like install newest version of smae rom on ur phone u can WIPE NOTHING! (only if u get problem )
yes 1st kernel (recovery (CWM) built in) then ROM ; maybe some addons/gapps (google apps), dun
peace
Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
thesm said:
Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
Click to expand...
Click to collapse
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
PureMind0 said:
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
Click to expand...
Click to collapse
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
thesm said:
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
Click to expand...
Click to collapse
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
PureMind0 said:
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
Click to expand...
Click to collapse
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
thesm said:
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
Click to expand...
Click to collapse
Ask here
http://forum.xda-developers.com/showthread.php?t=1846277
Sent from my GT-I9100 using Tapatalk 2
Hi friend
googled but, looks something different to ..
Im getting installation aborted status 7 during installation of kitkat
ROMs like cm-11-20140101-INFECTED-i9100 and super nexus
The same above rom has been flashed before worked well and no problem, now not able flash
tried using recovery.. original CWM apolo kernal(CWM), Philz kernal(CWM) and even TWRP
and deleted asserts in rom update scrip file still error status 7
But the thing is i can flash NeatROM lite using above Recovery
Im little scared i think it has been bricked?
Please help regarding above error
thippesh said:
Hi friend
googled but, looks something different to ..
Im getting installation aborted status 7 during installation of kitkat
ROMs like cm-11-20140101-INFECTED-i9100 and super nexus
The same above rom has been flashed before worked well and no problem, now not able flash
tried using recovery.. original CWM apolo kernal(CWM), Philz kernal(CWM) and even TWRP
and deleted asserts in rom update scrip file still error status 7
But the thing is i can flash NeatROM lite using above Recovery
Im little scared i think it has been bricked?
Please help regarding above error
Click to expand...
Click to collapse
its not bricked, if it was bricked you can't even start the phone so no worries.
first make sure your phone is a gt9100, if it is try to flash something else (just for a test), or download a other rom, like slimsaber. Please give a report back :highfive:
You flash the CWM 6.0.4.5 (KK Compatible)?
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Dampierre said:
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Click to expand...
Click to collapse
Exatcly. I raccomanded flash a KK ROM from CM 10.2 / ROM based-on-10.2
COMMON PROBLEM !
1. if your in TWRP install blazing kernal to get the lower version of cwm
2. if your getting error on cwm flash an older version CM 10.2
3. that's it fixed
4. or if your in cm 10.2 and still getting error in the sense corrupted download
hope it helps :good:
Dampierre said:
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Click to expand...
Click to collapse
Thank you all everyone to your kind replies and helping me out this problem,
has been solved by first flashing the gustavo's Kitkat kernel or kitkat Compatible Kernal
after that i can flash the KK rom
thanks thank you guys
-Marco said:
Exatcly. I raccomanded flash a KK ROM from CM 10.2 / ROM based-on-10.2
Click to expand...
Click to collapse
Does this mean I have to install ROM from CM 10.2?
This means I have to clean all my data n cache 1st. Thn install CM 10.2?
Thn clear data n cache again?
Thn install the Kit Kat ROM n GApps?
Yep
Hello !
I try LOLLIPOP for 2 days and i want to come back to KITKAT because some Xposed modules i need don't works on 5.0.2 (wanamlite for example).
I try to put RESTORE my KITKAT rom but when it boot up , i have nothing into my files... (partition move ?)
So i try to flash a rom with ODIN into 4.4.4 and it fail -_- (2 or 3 roms i try!!)
did someone have any solution ? i see this vidz : https://www.youtube.com/watch?v=PFELFws-CTg but it's a 5.0.2 ROM into it -_-
thanks....
You can try to install TWRP recovery and wipe /system, /cache and dalvik cache before flashing KitKat with Odin. First flash STOCK SAMSUNG KITKAT ROM because you need the bootloader included in there...
Or you stay on Lollipop and try wanam xposed for Lollipop
SHA_NDY said:
You can try to install TWRP recovery and wipe /system, /cache and dalvik cache before flashing KitKat with Odin. First flash STOCK SAMSUNG KITKAT ROM because you need the bootloader included in there...
Or you stay on Lollipop and try wanam xposed for Lollipop
Click to expand...
Click to collapse
Hello
First Thanks for your detailed answer
thanks for wanamlite lollipop , i don't find it on the web when i'm looking for it (on the phone )
But it's strange , i do thing you said (to downgrade) and it failed again and again ... :/
Please , can you provide me links for your deodexed stock ROM ? or can i deodex it with this guide ? http://forum.xda-developers.com/showthread.php?t=2374008
bluedragon38 said:
Please , can you provide me links for your deodexed stock ROM ? or can i deodex it with this guide ? http://forum.xda-developers.com/showthread.php?t=2374008
Click to expand...
Click to collapse
For Lollipop you need a special deodexing tool, you can try my guide to deodex your ROM: http://forum.xda-developers.com/galaxy-alpha/help/g850f-help-deodexed-stock-5-0-2-french-t3138531
Feedback very appreciated!
So, I downloaded cwm, flashed a rom and when the installation of the rom was over, it rebots back into the recovery mode.
flash stock rom?
muhammadhakimi said:
flash stock rom?
Click to expand...
Click to collapse
Where can i get it ?