Related
My phone is stuck at the SAMSUNG boot screen part, it displayed the boot sound but that was it.
I downloaded the wrong phone version of this http://forum.xda-developers.com/showthread.php?t=892297
I can't get back into my phone, is there anyway to restore what I had.
I made a titanium backup and a nandroid backup aswell.
I've made relatively stupid mistake like you. (Not that we are stupid, but Newbie @ this whole phone stuff).
The best way to unbrick the bricked phone is by reinstalling the rom, which will wipe out the data on your phone (but better than having bricked phone eh?)
This step only applies if your phone is "ROOTED"
Follow the instruction in this post
"http://forum.xda-developers.com/showthread.php?t=948679"
If you do exactly what is says you will have your phone back!
If you could, go over this in plain english for me.
I am in download mode but this dosen't make any sence
"and flash modem via Odin. Use pda button"
Ok now I went in the recovery mode and reset factory settings.
was that a bad idea?
Onlyonebowman said:
If you could, go over this in plain english for me.
I am in download mode but this dosen't make any sence
"and flash modem via Odin. Use pda button"
Click to expand...
Click to collapse
You need to download the odin file onto your computer, then get your phone in download mode and open up odin on your computer. Next use pda button to flash the modem file that you downloaded. Sorry, can't give you links as I am not at my computer.
Sent from my SCH-I500 using XDA App
Would doing a factory reset on the phone (via the button method) void any chance of flashing the TW rom?
You are probably still going to have to use ODIN to get your phone back.
Download the 3 files from the link in post #2
Open ODIN on your computer. Pull out battery from phone, hold DOWN VOL and plug phone into USB. Once ODIN recognizes your phone, click PDA and select the modem file and click start.
Once finished, put battery back in, hold UP VOL, DOWN VOL, and power to get into CWR. Select install zip from SDcard, choose zip, scroll down to the correct file and hit the power button to install the ROM.
Do step 2 for the CW package and reboot.
That should get you going.
Harbo99 said:
You are probably still going to have to use ODIN to get your phone back.
Download the 3 files from the link in post #2
Open ODIN on your computer. Pull out battery from phone, hold DOWN VOL and plug phone into USB. Once ODIN recognizes your phone, click PDA and select the modem file and click start.
Once finished, put battery back in, hold UP VOL, DOWN VOL, and power to get into CWR. Select install zip from SDcard, choose zip, scroll down to the correct file and hit the power button to install the ROM.
Do step 2 for the CW package and reboot.
That should get you going.
Click to expand...
Click to collapse
I kniw s/he said it but to clarify on this part make sure you use the PDA button. This is very important. It's very easy to mess that part up if you are still new.
Sent from my SCH-I500 using XDA Premium App
Now I'm having a problem with Odin, it's stuck at the stage that says
<1> setup connection...
it sits here for some time, is there anything I'm doing wrong that would cause this?
Ok guys I fixed it.
For future people reading this thread.
I used Odin v1.3 and the D101.package3.tar.md5 files.
Congratz on your fix. I'm sorry I didnt state how to Unbrick ur phone clearly. I was In hurry .
This method applies to all of the BRICKED phone. Take it from someone who bricked twice and soft brick.
Sent from my SC2.8/EB01 Fascinate using XDA Premium
my samsung vibrant is looping. I had team whiskey next gen v2 on it. was trying to get the miui on there. I backed up my next gen v2 with titanium backup. I download the miui 1.6.17. Booted into recovery and flashed it. Im sure I missed a set of instructions because now my phone is looping and wont even allow me to go back to recovery using the 3 buttons. Please help me start over so I can at least get my phone working again. Right now it just sits at the Vibrant-Samsung Screen.
Please assist and thank you.
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
thank you. I will get to it...thanks again. Ill report back when I have something to report.
Thank you so much. Flawless! my first "ODIN back to Stock"
ur very welcome!
P.s if u dont thank me ill hunt u down...(JK) or am i??
THIS IS ONLY FOR GALAXY PLAYER 4.0 U.S and 5.0 U.S. DO NOT TRY ON ANYTHING ELSE YOU WILL FAIL. I TAKE NO RESPONSABILITY TO ANY DAMAGE.
This will help you either unbrick your device or fix the boot loop or any other problems you have. This will delete EVERYTHING.
Instructions
Download the stock recovery file below, and odin to your desktop. All Files are located down below.
Instal Samsung Kies, you can find this by googleing or by the samsung website.
Once installed, Put your device in download mode by Holding the Power+Volume Down Buttons until you see a download mode sign.
NOTE (If you cant get into this mode, your Galaxy Player probably displays a phone and computer icon. Dont worry and continue one Skip Step 2)
You can now connect your device to your PC, You should see installing device. Wait for it to finish. If you windows cannot install it this means kies was not
installed correctly. Google Samsung Drivers and install that.
Ok once your computer recognizes your device go ahead and open odin.
Ok you should see your device in a box at the top.
(If you see two dont worry and continue, you would prob get a fail for 1 of them its ok.)
Ok once you see your device go ahead and click PDA. Now browse for the file called package_us2.3.5.tar.md5. Select it. (The One You Just Downloaded)
Before you start make sure the only little boxes selected are Auto Reboot and F. Reset Time.
Once you selected the file. Go ahead and click Start.
It should take about 1-5 min to finish.
If you get a error. Disconnect your device and close odin. Repeat the steps It should Work.
IF YOU CANNOT ABSOLUTELY GET IT TO WORK DO THIS.
Go here LINK
Download your pit file. Save to desk or anywhere it is accessable.
Ok now repeat steps about BUT BEFORE you click start again. Click PIT and locate the file you just downloaded. Now click start it should WORK.
Ok now that we are done with odin Disconnect your device from pc and make sure it is turned completely off.
Hold the buttons Power+Volume up Button.
You should enter a mode called android standard recovery.
Select Wipe Data/Factory Reset. (Note you click ok by clicking the home button and move down and up by the volume buttons.
Now once that is done click Wipe Cache.
Reboot Galaxy Player
Tadaa your GP should turn on normally. (IF YOU CANNOT GET IT TO WORK PLEASE CONTACT ME AND I WILL TRY TO HELP YOU)
IF YOU WANT TO DO THIS ON A GALAXY PLAYER 5 DOWNLOAD THE GALAXY PLAYER 5 FILE BELOW GOOD LUCK.
Download 4.0 Stock MD5 - LINK
Download 5.0 Stock MD5 - LINK
http://forum.xda-developers.com/show....php?t=1389873 gives me a 404 error. The link to download the image for the 4 inch Player works great. Haven't gotten mine into a bootloop yet. Thanks for sharing this.
Thanks For That it is now fixed.
Had to use this tonight after something went wrong using Clockwork recovery to make a backup on my US 4.0.
Worked perfectly. Thanks so much for this.
Thanks glad to help.
Is this completely stock, or is there a few mods. made to the kernel?
Sent from my YP-G70 using XDA App
I think it is stock it only contains factoryfs and kernel so the boot and all the other files are done by your device once you click factory reset.
Hyperrunner said:
I think it is stock it only contains factoryfs and kernel so the boot and all the other files are done by your device once you click factory reset.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1450013
This is the same ROM as this... There are still a few Mods that were made. Please post on how to remove the mods from this link, so other people know about them. As for the 4.0 I have no idea if it is the same story.
Thanks for this, saved my butt after doing a nandroid backup with CWM that resulted in bootloops.
Mike T
i could hug you right now....saved my US 4.0 GP. just had to clear data and cache after it booted
Does anyone still have this file? I tried the link but it's not working. Wanted to give this a shot before I sent it in to get fixed.
Sent from my ADR6425LVW using xda app-developers app
Hyperrunner said:
THIS IS ONLY FOR GALAXY PLAYER 4.0 U.S and 5.0 U.S. DO NOT TRY ON ANYTHING ELSE YOU WILL FAIL. I TAKE NO RESPONSABILITY TO ANY DAMAGE.
This will help you either unbrick your device or fix the boot loop or any other problems you have. This will delete EVERYTHING.
Instructions
Download the stock recovery file below, and odin to your desktop. All Files are located down below.
Instal Samsung Kies, you can find this by googleing or by the samsung website.
Once installed, Put your device in download mode by Holding the Power+Volume Down Buttons until you see a download mode sign.
NOTE (If you cant get into this mode, your Galaxy Player probably displays a phone and computer icon. Dont worry and continue one Skip Step 2)
You can now connect your device to your PC, You should see installing device. Wait for it to finish. If you windows cannot install it this means kies was not
installed correctly. Google Samsung Drivers and install that.
Ok once your computer recognizes your device go ahead and open odin.
Ok you should see your device in a box at the top.
(If you see two dont worry and continue, you would prob get a fail for 1 of them its ok.)
Ok once you see your device go ahead and click PDA. Now browse for the file called package_us2.3.5.tar.md5. Select it. (The One You Just Downloaded)
Before you start make sure the only little boxes selected are Auto Reboot and F. Reset Time.
Once you selected the file. Go ahead and click Start.
It should take about 1-5 min to finish.
If you get a error. Disconnect your device and close odin. Repeat the steps It should Work.
IF YOU CANNOT ABSOLUTELY GET IT TO WORK DO THIS.
Go here LINK
Download your pit file. Save to desk or anywhere it is accessable.
Ok now repeat steps about BUT BEFORE you click start again. Click PIT and locate the file you just downloaded. Now click start it should WORK.
Ok now that we are done with odin Disconnect your device from pc and make sure it is turned completely off.
Hold the buttons Power+Volume up Button.
You should enter a mode called android standard recovery.
Select Wipe Data/Factory Reset. (Note you click ok by clicking the home button and move down and up by the volume buttons.
Now once that is done click Wipe Cache.
Reboot Galaxy Player
Tadaa your GP should turn on normally. (IF YOU CANNOT GET IT TO WORK PLEASE CONTACT ME AND I WILL TRY TO HELP YOU)
IF YOU WANT TO DO THIS ON A GALAXY PLAYER 5 DOWNLOAD THE GALAXY PLAYER 5 FILE BELOW GOOD LUCK.
Download 4.0 Stock MD5 - LINK
Download 5.0 Stock MD5 - LINK
Click to expand...
Click to collapse
The link for the Player 5.0 doesn't work as megaupload is no longer in existence. Please update it, thanks.
_AI_ said:
The link for the Player 5.0 doesn't work as megaupload is no longer in existence. Please update it, thanks.
Click to expand...
Click to collapse
Yes same for the 4.0 4shared says invalid file
Sent from my HTC6435LVW using xda app-developers app
Hey all
First off id like to say thanks for looking and helping
I recently updated my phone to the ICS (official) via the OTA update and i found i could NOT install 3rd party versions of software
So i rebooted into odin mode where i then installed the rom i origanaly had then it got stuck at the boot screen with the yellow triangle
So i rebooted into ODIN and re flashed to the origanal XWKF3 i origanaly used
Then i rebooted to the recovery mode then tried to install the rom (update.zip) and it errors saying E:failed to verify whole-file signiture. and E:Signiture verifacation failed, Installation FAILED
It wont no matter what i do play ball so here it is WHAT CAN I DO besides throw it against a wall verrrrrry f in g hard and hope it smashes into millions of lille bits .....
It is making me ill i tell ya
So if anyone can help it would be so appreciated and i would donate £20 to there happy funds they can buy a case or something nice with ........
EDIT:: now it wont respond to ODIN odin sees it but sticks at setting up connection then fails
Also when starting ODIN mode on the phone it says ODIN MODE , PRODUCT NAME SHG-I777 (this was one of the roms i tried) and wont change no matter what rom i try... custom binary says YES (9 counts) CURRENT BINARY: CUSTOM
cheers again
Can't you skip signature verification in CWM. also did you do a band backup before updating. Strange issue you have.
Sent from Atrix 4g Neutrino 2.5p
Hi thanks for replying
I mostly have to get to the recovery from S2 root software and i have to have an unsecure tar rom installed.....
I cant boot into CWM i can only boot into there boot recovery the only options in there are
ANDROID systerm recovery <3e>
Enter: ok key, select :vol up / vol down
reboot system now
apply update from sd card (this is where i get the signiture errors)
wipe data/factory reset
wipe cache partition
thats it
What version of the sgs2 do you have? You may have flashed a ROM for the wrong model.
Sent from my GT-I9100T using XDA
I only wish i knew i thought it was the I9100 with XWKF3 tar but i am obviosly wrong and all the kernels in XDA links dont work so cant get the uk o2 ones
Is there anyway of finding out withought having to have a working phone ie through the serial etc..
It is an unlocked phone
I have it on o2 and it is british not imported
Cheers i wish i was clued up about this
The first time i rooted it when i got it it all worked well no problems and i then flashed back to the origanal rom and it worked well got all updates and was still rooted
After ICS i see i could not install some apps i had so i flashed a new insacure rom and thats where it all began
IS IT BRICKED SHOULD I SELL IT AS FAULTY
No, as your phone still turns on.
First boot back into the recovery you have now, and factory reset and wipe the cache.
Then to revert back to stock head over to the galaxy s2 forums, then into original Android development, then head into the official firmware page, and flash one of the firmwares listed there with Odin.
Hope that helps
Sent from my GT-I9100 using XDA
I will try this right now and if it works i am going to transfer 20 pound to you sir
Thanks for the support.
This is the one you ment if so all the links are dead http://forum.xda-developers.com/showthread.php?t=1075278
thats the one i tried many timmes already
nutzrutz said:
I will try this right now and if it works i am going to transfer 20 pound to you sir
Thanks for the support.
Click to expand...
Click to collapse
Try to reflash again
Sent from my GT-S5830 using xda premium
thnx but I don't want the money, just looked like you needed some help
Sent from my GT-I9100 using XDA
carbonos1 said:
thnx but I don't want the money, just looked like you needed some help
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1075278 Links are all dead.. is there anywere else i can find them.?
EDITs the root version that is currently on it is LINUX VERSION 2.6.35.7-I9100XWKF3-CL276555 ([email protected]) (gcc version 4.4.0 (GCC) #2 SMP PREEMPT thu jan 9 18:28:28 KST 2011
Prog used to root is S2 root
Unfortunately no, but mirror 2 on xxlpq in fact does work, I'm downloading it now
Sent from my GT-I9100 using XDA
Hello there,
Here are the steps that might help you.
1. Download ODIN from attachment.
2. Download CM9 Resurrection Edition for use with Odin from below URL.
cm-9-20120330-ODIN-galaxys2.tar.md5
3. Power off your phone.
4. Press Volume Down + Home Button + Power Button simultaneously to enter into download mode.
5. When you're in Download Mode, start the ODIN you've downloaded from attachment and connect your phone to Computer.
6. Let ODIN detect your device and select the downlaoded tar.md5 file in PDA section and click on Start button.
7. If everything is fine, ODIN will install the CM9 ROM in your phone.
8. After the process is complete, disconnect the phone and wait for it to boot.
9. After successful booting up, you may stick with that build or install the latest version of CM9 from below link.
update-cm-9-20120331-CODEWORKX-galaxys2-signed.zip
10. Just put above mediafire file in your SD Card.
11. Boot your phone in Recovery mode from your OS, Wipa data, cache, dalvik-cacke, battery stats
12. Format /system
13. Install zip file from SD card and select the downloaded file from mediafire, install it and reboot after successful installation.
14. You may optionally install GAPPS from recovery by downloading it here.
Let me know how it goes.
chiaotzu said:
Hello there,
Here are the steps that might help you.
1. Download ODIN from attachment.
2. Download CM9 Resurrection Edition for use with Odin from below URL.
cm-9-20120330-ODIN-galaxys2.tar.md5
3. Power off your phone.
4. Press Volume Down + Home Button + Power Button simultaneously to enter into download mode.
5. When you're in Download Mode, start the ODIN you've downloaded from attachment and connect your phone to Computer.
6. Let ODIN detect your device and select the downlaoded tar.md5 file in PDA section and click on Start button.
7. If everything is fine, ODIN will install the CM9 ROM in your phone.
8. After the process is complete, disconnect the phone and wait for it to boot.
9. After successful booting up, you may stick with that build or install the latest version of CM9 from below link.
update-cm-9-20120331-CODEWORKX-galaxys2-signed.zip
10. Just put above mediafire file in your SD Card.
11. Boot your phone in Recovery mode from your OS, Wipa data, cache, dalvik-cacke, battery stats
12. Format /system
13. Install zip file from SD card and select the downloaded file from mediafire, install it and reboot after successful installation.
14. You may optionally install GAPPS from recovery by downloading it here.
Let me know how it goes.
Click to expand...
Click to collapse
Thanks so much for them i got them BUT now ODIN says ADDED and when i load kenel into PDA then click start it just hangs and does not flash
IT DID PREVOIUS BUT NOW IT WONT FLASH do i add the pit file that was iincluded in the odin download i got from you as i am going to try that next
nutzrutz said:
Thanks so much for them i got them BUT now ODIN says ADDED and when i load kenel into PDA then click start it just hangs and does not flash
IT DID PREVOIUS BUT NOW IT WONT FLASH do i add the pit file that was iincluded in the odin download i got from you as i am going to try that next
Click to expand...
Click to collapse
No, don't add that PIT file. Just post the log messages from ODIN.
EDIT:
Also try following things:
1. Make sure you're in download mode and your screen shows "Downloading..." text.
2. Take out your battery for 5 minutes and put it back.
3. See if the phone charges in power off mode. If yes, make sure it's charged enough, at least 30%.
4. Can you go into Recovery mode? Try pressing Volume Up + Home Button + Power Button simultaneously to enter into recovery mode. If you're able to get into recovery mode, you can flash the update-cm-9-20120331-CODEWORKX-galaxys2-signed.zip file from there. See if that works for you.
5. Possible post a screenshot of ODIN where it's stuck.
chiaotzu said:
No, don't add that PIT file. Just post the log messages from ODIN.
EDIT:
Also try following things:
1. Make sure you're in download mode and your screen shows "Downloading..." text.
2. Take out your battery for 5 minutes and put it back.
3. See if the phone charges in power off mode. If yes, make sure it's charged enough, at least 30%.
4. Can you go into Recovery mode? Try pressing Volume Up + Home Button + Power Button simultaneously to enter into recovery mode. If you're able to get into recovery mode, you can flash the update-cm-9-20120331-CODEWORKX-galaxys2-signed.zip file from there. See if that works for you.
5. Possible post a screenshot of ODIN where it's stuck.
Click to expand...
Click to collapse
Ok phone is off battery is out for a min or 10 then i will put it back in n try odin then if still not playing fair i will do it the other way.
I take it you ment put that file on my micro sd card yes then install
when i try this before it gives me two red error lines about signiture verification
IS DOING IT NOW EDIT EDIT EDIT just waiting for flash to finish IF THIS WORKS GIVE ME A PAYPAL ACCOUNT MATE YOU DESERVE A DRINK ON ME BIG TIME
I love you
YOU MY FRIEND ARE THE GREATIST PERSON ALIVE I LOVE YOU HAHAHAHAHA (in a non gay way)
IT IS ALIVE
ALIVE I TELL YOU I OWE YOU BIIIIIIIIIIG TIME please let me transfer 20 into an paypal account i only need a email address linked to it
Please accept all my gratitude
You saved me hundreds in gettin a new phone the the galaxy note looks nice......
nutzrutz said:
YOU MY FRIEND ARE THE GREATIST PERSON ALIVE I LOVE YOU HAHAHAHAHA (in a non gay way)
IT IS ALIVE
ALIVE I TELL YOU I OWE YOU BIIIIIIIIIIG TIME please let me transfer 20 into an paypal account i only need a email address linked to it
Please accept all my gratitude
You saved me hundreds in gettin a new phone the the galaxy note looks nice......
Click to expand...
Click to collapse
Congrats man for getting the device back. I'm glad that worked out for you. Check your Inbox for the message.
---------- Post added at 07:29 PM ---------- Previous post was at 07:00 PM ----------
Thanks a lot for the donation man! More than you mentioned actually. You can always count on me for any help in future.
One more thing b4 i go
Is there a reason its not connecting to Keis now
Is it the rom etc stopping it or is it something else do you recon ?
Shows up ok in my computer but when i start keis it just continusly try to connect
If not can i transfer my contacts .spb file on the sd card and update there somehow
nutzrutz said:
Is there a reason its not connecting to Keis now
Is it the rom etc stopping it or is it something else do you recon ?
Shows up ok in my computer but when i start keis it just continusly try to connect
If not can i transfer my contacts .spb file on the sd card and update there somehow
Click to expand...
Click to collapse
Right now, you've installed CyanogenMod ROM of Ice Cream Sandwich 4.0 version of Android. It doesn't have Kies in it as it's a version from google, more clean and bloatware free. If you want, you can go back to Samsung Version to use Samsung Kies. All you need to do is to download and follow the instructions from following thread:
http://forum.xda-developers.com/showthread.php?t=1544487
Alternatively, here are instructions to import it into without Kies.
there is one way i found
1. open Kies
2. open your last saved *.spb file
3. save the file again as *. vsf manually in the file name area
4. go to were normally saved spb files ( C:\Users\ _\Documents\samsung\Kies\PIMS)
5. you will find all the contacts saved as vsf file.
6. select all contacts and copy them in a directory (ontacts)
7. connect your samsong to the pc and copy the directory (cotacts) in to the sd card
8. disconect your samsong
9. select the contact icon
10. from the left key press and select import contact from sd
job done
Click to expand...
Click to collapse
Source: http://forum.xda-developers.com/showpost.php?p=15447202&postcount=4
PS: I suggest you to save all your contacts to Google that way you don't have to backup them everytime you format your device.
Will do it the 2nd way as i am happy with the software on it now
I thought i had synced them with google but am not sure how to get them back
Hi Guys,
This is a guide on how to get CyanogenMod and fully functional UNLOCKED BOOTLOADER Galaxy S4 Developer Edition for VZW.
Purchase Links
link
link
Once I got the phone I didnt find much help on how exactly to root the device and get custom rom loaded on it.
What bits and pieces of information I found was confusing... never the less after some reading I got to understand the basics of what needed to happen.
So here it is:
Files:
Download and Install Samsung Official USB Drivers - link
Download and extract ODIN v3.07 - Link MD5: 0C21E86A38C7868B0B50396EEE85721F
Download and extract this recovery - (Unzip ) - Link MD5: D8C883282D1584A0E067E12CCF8C1750
Download Cyanogen Mod - Link
Download Google Apps - ( for 10.1 stable ) Link
Click to expand...
Click to collapse
Follow the Steps in this guide:
GUIDE
Steps to Install ClockworkMod Recovery on Galaxy S4 I9505
Step 1: Extract Odin 3.07 file using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4 I9505. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S4 I9505 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 5: In Odin, click the PDA button and select the [RECOVERY PROVIDED] file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Click to expand...
Click to collapse
At this point reboot the phone direclty in recovery by holding the VolUp button and pressing Power button until it vibrates.
You should see it power up and blue text appear in upper left corner " Recovery..."
if you don't pull the battery and try again.
You should see the familiar CWM Recovery appear.
Backup your system.
After that is complete Install CM10.1 and Google Apps.
Enjoy.
Click to expand...
Click to collapse
I take no responsibility for damaged devices. If you are not ready to loose your phone possibly forever keep it stock.
It worked for me.
All systems are operating at this point.
Small glitch with having to restart BT after I walk away from my car and get back in it and trying to reconnect to it.
The IR Sensor doesn't work. I saw that the drivers are being implemented with some of the nighly builds.... so its not far from being operational.
Also checkout this guide:
Link
If someone wants to rewrite this and make it cleaner please do .... =)
http://forum.xda-developers.com/attachment.php?attachmentid=2376307&stc=1&d=1383795414
Best.
Thanks for documenting your steps! I was running CM10 on my Epic 4G just before I switched over to the GS4 Developer Edition phone. I'm thinking of flashing it again.
zambezy said:
Hi Guys,
This is a guide on how to get CyanogenMod and fully functional UNLOCKED BOOTLOADER Galaxy S4 Developer Edition for VZW.
Click to expand...
Click to collapse