moto E(2enGen) 4G LTE (xt1524) , hard bricked! - E 2015 Q&A, Help & Troubleshooting

Hello everyone! I have the phone in hard bricked, I read on the forums that you can solve, not my model (xt1524) but other models. I tried some procedures but has not been able to solve anything. Can someone tell me how to call the files I have to try. I tried with Motoflasher but still not valid for my model. So I would try to look for files that I need but do not know their names. Thank you! I read somewhere that would serve certain files that are called programmer.mbm and singleimage.bin. Can someone tell me exactly what they're called to my phone.? Thank you!

---

Maybe is usefull :
- http://forum.xda-developers.com/moto-e-2015/general/stock-firmware-images-t3049047
- http://techtrickz.com/how-to/reinstall-stock-firmware-on-2nd-generation-moto-e-2015/

---

thanks, but the firmware is I, I can not install it because not light! I can only access it via the "Qualcomm HS-USB QDLoader 9008". Reading the various forums say that you need the program Motoflasher and certain files to switch it on and enter Fastboot. The problem is that I do not know which files I need.

---

anyone knows why I get this error?
**** QBOOT SELECTION STARTED: ****
**** BOOTLOADER FLASHING STARTED: ****
OUTPUT: opening device: \\.\COM9
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: OKAY [ 0.001s]
OUTPUT: identifying device
OUTPUT: ...serial = 0x63000FE
OUTPUT: ...chip-id = 0x705
OUTPUT: ...chip-rev = 0x0
OUTPUT: ...sv-sbl = 0x0
OUTPUT: OKAY [ 0.002s]
OUTPUT: finding files
OUTPUT: ...programmer = programmer.mbn
OUTPUT: ...singleimage = singleimage.bin
OUTPUT: OKAY [ 0.001s]
OUTPUT: validating files
OUTPUT: OKAY [ 0.002s]
OUTPUT: switching to download mode
OUTPUT: OKAY [ -0.000s]
OUTPUT: greeting device for image downloading
OUTPUT:
OUTPUT: OKAY [ -0.000s]
OUTPUT: sending programmer
OUTPUT: Unexpected packet: 4. Was expecting: 3
OUTPUT: FAILED (blank-flash:sahara-transfer-image:send-image:unexpected packet)
OUTPUT:

---

hemikranion said:
anyone knows why I get this error?
**** QBOOT SELECTION STARTED: ****
**** BOOTLOADER FLASHING STARTED: ****
OUTPUT: opening device: \\.\COM9
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: OKAY [ 0.001s]
OUTPUT: identifying device
OUTPUT: ...serial = 0x63000FE
OUTPUT: ...chip-id = 0x705
OUTPUT: ...chip-rev = 0x0
OUTPUT: ...sv-sbl = 0x0
OUTPUT: OKAY [ 0.002s]
OUTPUT: finding files
OUTPUT: ...programmer = programmer.mbn
OUTPUT: ...singleimage = singleimage.bin
OUTPUT: OKAY [ 0.001s]
OUTPUT: validating files
OUTPUT: OKAY [ 0.002s]
OUTPUT: switching to download mode
OUTPUT: OKAY [ -0.000s]
OUTPUT: greeting device for image downloading
OUTPUT:
OUTPUT: OKAY [ -0.000s]
OUTPUT: sending programmer
OUTPUT: Unexpected packet: 4. Was expecting: 3
OUTPUT: FAILED (blank-flash:sahara-transfer-image:send-image:unexpected packet)
OUTPUT:
Click to expand...
Click to collapse
Navigate in your bootloader to factory mode and then press the power button around 20-40 times before it boots up...Then unlock the bootloader and flash the Stock ROM for your model

---

the device does not start at all, there just led blinking on moto g4 plus

---

bsuthar said:
the device does not start at all, there just led blinking on moto g4 plus
Click to expand...
Click to collapse
Just flash your device with stock rom using sp flash tools .your device will start.

---

What he said ^^ Download the latest Stock ROM for your device, and issue the commands mentioned in @fratellos link one after another most likely you should get it back up.

---

skkethwas said:
Just flash your device with stock rom using sp flash tools .your device will start.
Click to expand...
Click to collapse
plss help me....
i have moto e4 and i don't know which file flashed first preloader.bin or pgpt.bin
first of all i flash preloader.bin and other factory images when i am going to flash pgpt.bin command ended up with error like this "PGPT: partition table not found" . after this wiped userdata and relock the bootloader. on fastboot reboot device cannot boot into system, no bootlogo, no fastboot, no recovery but recognized by PC and Miracle tool also charging led blink.
is this a softbrick or hardbrick.
Moto E4 won't power on. only white light led comes up when connecting with pc or charger. device recognized by pc.

---

kartik verma said:
plss help me....
i have moto e4 and i don't know which file flashed first preloader.bin or pgpt.bin
first of all i flash preloader.bin and other factory images when i am going to flash pgpt.bin command ended up with error like this "PGPT: partition table not found" . after this wiped userdata and relock the bootloader. on fastboot reboot device cannot boot into system, no bootlogo, no fastboot, no recovery but recognized by PC and Miracle tool also charging led blink.
is this a softbrick or hardbrick.
Moto E4 won't power on. only white light led comes up when connecting with pc or charger. device recognized by pc.
Click to expand...
Click to collapse
I think this can help you
https://forum.xda-developers.com/moto-e4/how-to/moto-e4-guide-stock-firmware-restore-t3661684