Hello guys.
I have problem with p760. When my friend gave me this phone it had only no signal issue. After sobe fights phone is almost dead, something went wrong and I have only acces to download mode BUT:
- every flashing app crashes at ifx communication with modem (signall issue was propably caused this because of unknown IMEI in settings)
There is no way to get into OMAP mode - without battery phone is recognized as unknown device and it restalt itselt all the time.
Like u see - ONLY DOWNLOAD MODE, wipe doesn't work, any other modes non functioning properly, OS is not starting anymore.
Can somebody help? Best regards
So nobody can help me right? I have to start looking for new mainboard?
DJPatriX said:
Hello guys.
I have problem with p760. When my friend gave me this phone it had only no signal issue. After sobe fights phone is almost dead, something went wrong and I have only acces to download mode BUT:
- every flashing app crashes at ifx communication with modem (signall issue was propably caused this because of unknown IMEI in settings)
There is no way to get into OMAP mode - without battery phone is recognized as unknown device and it restalt itselt all the time.
Like u see - ONLY DOWNLOAD MODE, wipe doesn't work, any other modes non functioning properly, OS is not starting anymore.
Can somebody help? Best regards
Click to expand...
Click to collapse
Have you tried reflashing the phone through fastboot?
AshIndigo said:
Have you tried reflashing the phone through fastboot?
Click to expand...
Click to collapse
Omg, I forgott to check for reply :/
Yes, I've tried. There was something about unrecognised partition or similar, do not remember now. Phone still dead.
If Download Mode won't work anymore, only a JTAG Adapter with special recovery tools could help. If such a port has been implemented on the PCB for access by LG service personnel. Otherwise it would mean new PCB or better phone in this case.
Try to download LG Mobile Support Tool and connect your phone while holding vol up to enter S/W Update mode. Then click "Options" and next click Upgrade Recovery. Program will download latest stock ROM for your phone and it should help to "unbrick" your phone
That's exactly the final line of defense. If invoking DL mode don't work:
-unplug phone
-force power-off by keeping power bttn pressed, the only way for a bricked phone
-power on
-force power - off
-invoke DL mode
The extra power cycle increases the chance to succeed. It should take about 5 seconds for the phone to power-on after attaching it via usb(with vol-, not vol+ pressed, I think, but that's easy to verify) and go almost immediately into DL mode. Otherwise it's just bricked again or not powering. For this case is the work around with the extra power cycle.
Related
Well, after spending almost 11 hours trying to boot into recovery or download, I know for sure that there is something going on with my phone re: hardware locked. The date on my box is 7-16. It is an early Vibrant. But no matter what I do, I cannot get into download or recovery which means my ****ing phone is literally worthless.
I have tried all possible thousands of combination's of buttons, batteries, and cords while booting and nothing happens.
The Vibrant logo shows, then it shows the pink, annoying as hell T-mobile logo, than goes to the Galaxy S logo which loads for a little bit and then just leads me to a black screen. Eventually the 4 buttons on the front of the phone turn on and then nothing else happens. It will just sit like this forever.
I know all I need to do is get a working ROM loaded but it is literally impossible to do so.
Can anyone offer any suggestions? Or are anyone else having the same problem?
I guess the only way I can get a working phone is to get in touch with T-mobile and do a Warranty exchange. That's a damn shame too, because I will be without a working phone for a week.
What about using adb?
adb reboot recovery -or- adb reboot download ?
I had a hw locked vibrant, never tried the adb reboot download, recovery did work.. I added another line on my account last night for somone, who got a vibrant, theirs wasn't hw locked, so I traded 'em ;P
Agree with the above poster I have been stuck on the vibrant screen or dark screen and adb still worked to save me
when i try to use adb, it just tells me that it cant find the device. i'm not able to boot into android OS at all.... screen just hangs. so my computer is never getting a chance to see my phone hence why i cant use adb to reboot it into recovery or download.
I believe your device has to go into recovery mode then check with and devices and if you see a device I THINK it is and reboot download, I am 90% certain
Sent from my SGH-T959 using Tapatalk
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
98classic said:
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
Click to expand...
Click to collapse
i do believe i have the correct drivers installed. i was able to use adb to run lagfixes before i was having this problem. when i boot my phone, i get a sound from my computer saying that it recognizes a usb device. the two drives in the vibrant show up in My Computer but i cannot access them as windows says they are not accessable at the moment.
at what point will adb be able to recognize my phone when booting? no matter what i do when i try adb shell i get error: device not found
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Same problem here. I probably just have to sell it fast on ebay or something. Hopefully some kind of fix starts by the end of the week. First phone in my smartphone life to brick from a simple Voodoo lag fix. Please XDA gods find a solution.
crazycaveman said:
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Click to expand...
Click to collapse
nope, no go. adb will not recognize my device no matter what. and the device isnt loading the OS so i cannot turn debugging on. i guess this is a real "brick" then.
This sounds like a rant rather than a question. Just sayin'.
DKYang said:
This sounds like a rant rather than a question. Just sayin'.
Click to expand...
Click to collapse
fixed that. my bad.
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
renocivik said:
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
Click to expand...
Click to collapse
thanks for the suggestion. i found your thread and went through the steps in the OP... still no luck. no matter what i do, i cannot get passed the black screen the loads after the galaxy s logo. i also cannot get into download mode or recovery no matter what combination of button presses i use.
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
core99 said:
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
Click to expand...
Click to collapse
this isnt working either. :-(
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
atoz350 said:
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
Click to expand...
Click to collapse
this is exactly the method i want to try. but unfortunately i cannot get the phone into recovery or download mode. i have tried at least 100 times now with many different combination's of plugging the usb cord in and pressing the volume and power buttons.
two ideas: one, is it possible that i wiped recovery and download mode from my phone on accident? the reason why i ask is that i was super tired and flashing roms and kernels to my phone. i flashed back to my original stock rom and then i flashed the kernel. for some reason, i selected wipe date/cache in Rom Manager before flashing the kernel. i have no idea why i did this. seriously. totally noob move. so im assuming i have a kernel flashed but now there is no ROM installed for the phone to boot into.
two, if above is not the issue, than im going to assume that the phone is not recognizing any button presses while its off, so when i turn it on it just recognizes that the power was pressed and ignores the volume presses, thus not booting the phone into recovery or download.
edit: i should mention again that at no time does adb recognize my device. so i cannot use adb to reboot the phone into the mode i need.
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
byt3b0mb said:
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
Click to expand...
Click to collapse
I understand what you mean. I appreciate your criticism of my original post. Let me say that I wrote it while frustrated. But I know that isn't an excuse.
The device is fantastic. I know that I did this to it myself. It's unfortunate.
Anyways, I received a replacement phone. I will be more careful this time.
I recently bought a rooted Galaxy S3 from a friend. The problem is I can't get into download mode or CWM recovery.
I tried installing CWM recovery using ROM manager (v5) but I got an error saying: "GT-9300 does not have an officiall supported CWM recovery yet.
The phone is on android version 4.1.1 at this moment.
Could you help me installing recovery?
r3inhout said:
I recently bought a rooted Galaxy S3 from a friend. The problem is I can't get into download mode or CWM recovery.
I tried installing CWM recovery using ROM manager (v5) but I got an error saying: "GT-9300 does not have an officiall supported CWM recovery yet.
The phone is on android version 4.1.1 at this moment.
Could you help me installing recovery?
Click to expand...
Click to collapse
No download mode then you have a faulty phone and require a service centre repair .
jje
You could try a usb jig to force into download mode. They're a couple of dollars / pounds whatever.
There's also a thread in general to find who could lend you one nearby
Sent from my GT-I9300 using Tapatalk 4
Just to eliminate things, how are you trying to get into recovery and download?
slaphead20 said:
Just to eliminate things, how are you trying to get into recovery and download?
Click to expand...
Click to collapse
That seems a smart question I'm new to Samsung.
Download: Volume down, power on button and front button (home button) pushed in at the same time whilst the device is off to get into download. Result: I see the screen go on (screen is black but there's backlight) and after a couple of seconds it just boots the normal android system.
Recovery is volume up, power and home at the same time when the device is turned off. Same here, I see a response e.g. the backlight goes on but after a few seconds the phone boots up normally.
The booting proces takes longer than it normally does when just turning the device on. I think the software installed is causing this (the hardware seems to respond but it's like the software just ignores the input)
r3inhout said:
That seems a smart question I'm new to Samsung.
Download: Volume down, power on button and front button (home button) pushed in at the same time whilst the device is off to get into download. Result: I see the screen go on (screen is black but there's backlight) and after a couple of seconds it just boots the normal android system.
Recovery is volume up, power and home at the same time when the device is turned off. Same here, I see a response e.g. the backlight goes on but after a few seconds the phone boots up normally.
The booting proces takes longer than it normally does when just turning the device on. I think the software installed is causing this (the hardware seems to respond but it's like the software just ignores the input)
Click to expand...
Click to collapse
I would suggest either trying with adb or as suggested, usb jig
offbleh never
slaphead20 said:
I would suggest either trying with adb or as suggested, usb jig
Click to expand...
Click to collapse
I'll keep my hands of the adb thing. I don't want to make my problem worse
In my country no one seems to know such a usb jig but I already found a place where I can order them
I just have to stick the thing in and wait for it to engage download mode before I plug in my normal data cable right?
Thanks for the help
So I believe. I've not used one myself
Sent from my GT-I9300 using Tapatalk 4
So i was using RessurectionRemix (a version from last month) and recovery twrp 3.1.0-0 and the phone was working great!
Yesterday i left my phone charging over night and in the morning i wake up to my phone bootlooping!
So i tried different things including everything it says here https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949 without luck
I can get it into recovery and fastboot but as soon as i let the key combination go the phone stops and just shows a black screen (screen is on) and i cant get into qualcomm recovery to flash!
And the only way to shut off the phone is by holding power + vol up + vol down!
Any solution or suggestions?
Use flashone method to unbrick
md07 said:
Use flashone method to unbrick
Click to expand...
Click to collapse
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
try to flash fastboot rom from cucoco's.
Tsoler said:
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
Click to expand...
Click to collapse
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
md07 said:
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Click to expand...
Click to collapse
Did what you said but nothing happens
kayyappan said:
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when the you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
Click to expand...
Click to collapse
Phone gets recognized but not long enough to do anything (windows makes sound but doesn't install anything and doesn't show up in device manager)
try this guide
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
After a lot of trying i found out that when i keep pressed power + vol down or vol up while connected to pc and device is off it gets recognized as
qualcomm hs-usb qdloader 9008 long as i keep the keys pressed so i tried the flashone method but it just says could not connect
Are Qualcomm drivers loaded on your computer? I have not used flashone. I used QPST to see if phone is connected. I am not sure if they are same.
kayyappan said:
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
Click to expand...
Click to collapse
It doesn't stay long enough in recovery or fastboot to do anything it shuts off after a few seconds even with the buttons pressed after that it just shows a black screen
Phone vibrates when i press power and shows leeco logo (not os logo) and after 1-2 seconds screen goes black and phone vibrates again and shows leeco logo again and just continues looping
if i try to press power + vol up normally it goes into recovery but as soon as recovery is loaded screen goes black (screen on just doesn't show anything) the same goes for fastboot if i press power + vol down it loads fastboot but after 1-2 seconds screen goes black
if i keep pressing keys the phone just stays longer in recovery/fastboot but only 4-5 seconds
I assume you have adb and fastboot. Since you say the screen remains on when booting to recovery open a command prompt at the directory where adb is and issue a command "adb devices" without quotes. Does it just exit without showing any device or throws up some error? Try this irrespective of the black screen.
Have you looked at and tried what is given by @HTC-TYTN2 at post #8? It is for Le Max 2 and you will find a link to Quallcomm drivers too. Do not bother that the link mentions X820 even your Max 2 is 821, 829, etc.
since it happened after charging, you might want to check your cable and battery. best is to get a cheap usb multimeter.
Gesendet von meinem LEX820 mit Tapatalk
I too thought it could be the battery based on that's the screen goes off. But he also mentioned that the screen remains on but nothing to be seen after a short while. Wanted to suggest slow speed charging probably via a laptop usb as I'm not sure if he used high speed charging resulting in battery issue.
Did you solve the problem?
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Tsoler said:
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Click to expand...
Click to collapse
Try this:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp ?, only by fastboot
RaphaBraga23 said:
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp , only by fastboot
Click to expand...
Click to collapse
Try this via fastboot mode.:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe
hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
medja77 said:
hi everyone happy new year. pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/lg-g5
With that stated...
Your best bet is probably to take a look at the following thread and, if needed, post your question within that thread.
https://forum.xda-developers.com/showthread.php?t=3350648
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
medja77 said:
hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
Click to expand...
Click to collapse
Sorry to hear this...
Have you the Fastboot access? How to Check:
1) Remove Battery and put it back
2) Press and hold Volume - (Volume down) and connect via USB to your PC
3) The Phone Screen should change now and you can read something about Fastboot Mode
OR
Can you set your Phone into Firmware Download Mode?
1) Remove Battery and put it back.
2) Press and hold Volume + (Volume up) and connect via USB to your PC
3) The Phone goes normaly into Download-Mode now, see it on Phone Screen
4) Open LG Bridge and go to Update and then in the Bottom right Hand side onto >Correct Update Errors< this will flash your Phone with the Stock Rom
Working for you?
also i found many TWRP recovery for the same SoC (https://unofficialtwrp.com/download-twrp-3-3-1-mediatek-mt6765/ (Mediatek Helio P35 (MT6765))), will it work if I flash it with it?
thanks
horasmichael said:
also i found many TWRP recovery for the same SoC (https://unofficialtwrp.com/download-twrp-3-3-1-mediatek-mt6765/ (Mediatek Helio P35 (MT6765))), will it work if I flash it with it?
thanks
Click to expand...
Click to collapse
You will not no unless you try it
hi does yours work?
totalnewbielinux said:
hi does yours work?
Click to expand...
Click to collapse
do you have the same phone as him if so yes it will work as it is the same chipset t your phone mine is unofficial more like ported twrp
I am newbie but flashed samsung j7 before, yes I have oppo A15S, however the chipset I am not sure since the phone is come with the maxis/hotlink package that addon a few RM get free phone.
if possible I want official but asked chat GPT and google sadly no result+dead link.
totalnewbielinux said:
I am newbie but flashed samsung j7 before, yes I have oppo A15S, however the chipset I am not sure since the phone is come with the maxis/hotlink package that addon a few RM get free phone.
Click to expand...
Click to collapse
Mediatek MT6765 Helio P35 (12nm) is the chipset of your phone and also if you want an official version youcan compile your own twrp for your self
totalnewbielinux said:
if possible I want official but asked chat GPT and google sadly no result+dead link.
Click to expand...
Click to collapse
here there is an unofficial twrp for your chipset ---------> https://unofficialtwrp.com/download-twrp-3-3-1-mediatek-mt6765/
Hi my experience flash 1 phone before and that phone at least can boot into (normal mode) > now my oppo can only boot into recovery mode. Is there any way to enable developer mode?
totalnewbielinux said:
Hi my experience flash 1 phone before and that phone at least can boot into (normal mode) > now my oppo can only boot into recovery mode. Is there any way to enable developer mode?
Click to expand...
Click to collapse
what do you mean that your phone is stuck at recovery mode? if not you can enable the developers option this is the steps
1.) Go to setting
2.) Go to About phone
3.) tap the build number 7 times
4.) now quit the setting then open it again
5.) scroll down then choose the developers option
thats how you open developers option
basically when I reboot turn off> it will "never" boot into normal mode. My phone is so broken that pressing power button only still boot into recovery mode, wipe data and reboot still into recovery mode.
totalnewbielinux said:
basically when I reboot turn off> it will "never" boot into normal mode. My phone is so broken that pressing power button only still boot into recovery mode, wipe data and reboot still into recovery mode.
Click to expand...
Click to collapse
can you give a picture of your phone or video while doing it so i know what s the problem?
Sorry for late reply basically my volume key stuck and a week later it can use so I JUST IGNORE NOW WORSE. just now I power off my phone and now I cannot power on my phone (just now charging no problem) now charging does not show anything and my phone bricked...
totalnewbielinux said:
Sorry for late reply basically my volume key stuck and a week later it can use so I JUST IGNORE NOW WORSE. just now I power off my phone and now I cannot power on my phone (just now charging no problem) now charging does not show anything and my phone bricked...
Click to expand...
Click to collapse
your phone seems to be new which means that your volume keys are still new and good so thats not our problem here your phone didin't boot right? did you do something to your system phone like flashing or something? because if you do there is a big chance that you screw up something in your phone resulting it to be like that. now your phone can still be charge right there might be still a hope we just need to reflash your whole firmware ( if the problem is really a firmware) you said before you cant boot right then there must be a problem in the booting process, i tested this on my phone before i clean wipe my whole phone and that include system partition so when i tried to boot my phone it wont and when i charge it no logo would appear just like yours so im guessing that you phone partition is gone and like you said to its bricked now. if thats the case we need to flash the whole firmware
Anonymous V said:
your phone seems to be new which means that your volume keys are still new and good so thats not our problem here your phone didin't boot right? did you do something to your system phone like flashing or something? because if you do there is a big chance that you screw up something in your phone resulting it to be like that. now your phone can still be charge right there might be still a hope we just need to reflash your whole firmware ( if the problem is really a firmware) you said before you cant boot right then there must be a problem in the booting process, i tested this on my phone before i clean wipe my whole phone and that include system partition so when i tried to boot my phone it wont and when i charge it no logo would appear just like yours so im guessing that you phone partition is gone and like you said to its bricked now. if thats the case we need to flash the whole firmware
Click to expand...
Click to collapse
Thanks for reply>to avoid confusion no I did not do anything/flashing/even enable usb debugging to my OPPO A15S. I am total newbie that I flash Samsung J7 once only. The Oppo A15S yes it is 1-2 years only, volume key clicking works fine but after system update via setting>Official Oppo coloros things. My phone kinda messed up volume key not working<google results say because a lot of phone cannot boot up because of volume key. So should I pry open my phone to see the volume key? Or just wait until 1 day scheduled power up happens?
Logs:
Wednesday 5am my phone auto boot up in recovery mode.I press restart and the screen black nothing happens.
Thursday 5am no boot up
Friday no boot up too.
So I assume it is my phone power is low and somehow my auto scheduled power on force my phone to boot up? and that time system auto update causes my phone die in midway?
totalnewbielinux said:
So I assume it is my phone power is low and somehow my auto scheduled power on force my phone to boot up? and that time system auto update causes my phone die in midway?
Click to expand...
Click to collapse
hmm i see you didnt do anything in your phone but you did say that you updated it right? while updating you phone did something happen? like rebooting? if so there might be a chance that it became corrupted because of ,that while in the case of your power button what kind of problem does it have? does it work correctly? or you cant click it like its stuck or something? or maybe the button is working correctly and your phone just doesnt boot up? if the button is really problem like google stated ----->
Why is my OPPO always in Recovery mode?
One of the most common causes is that [B]one of the buttons used to access android system recovery is defective or malfunctioning[/B]. Now, you should first check if the physical buttons are responding properly, especially the volume buttons, before trying to get rid of the Android Recovery Mode.
you should probably check you physical button because that might be a problem and i just remembered i have the same problem in my sisters phone vivo y53 its always stuck in recovery mode and we are confused why did it happen so we bring it to our technician friend and let him fix it and he really fix it he he told me that if something happen like this again check all the buttons correctly. Now there is really problem in you button and you cant just pry in you phone you might break something you should let the professional do it like technician after you fix your button try to boot up again and if its still black screen or recovery then the problem is in the phone system and you can comeback here so we can help you fix it.