My current ROM is the XEU G925FXXU3COI9
I want to flash the newest EE EVR ROM released this week G925FXXU2QOI4 but odin fails at
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU2QOI4_G925FEVR2QOI1_G925FXXU2QOI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!![/SIZE]
I have flashed original firmwares via Odin many times so I can't understand why it doesn't work this time. I have gone from EVR to BTU to EVR to XEU but now is seems I'm stuck.
Any ideas please?
Hello
I would guess it's probably because your current version is a higher version compared to the one you want to flash, I mean you have U3 and want to flash U2.
But that's just my guess
Skhulile said:
Hello
I would guess it's probably because your current version is a higher version compared to the one you want to flash, I mean you have U3 and want to flash U2.
But that's just my guess
Click to expand...
Click to collapse
Isn't there a way to go backwards? I know you can't go from 5.1 to 5.0 but I'm sure I've changed ROMs back to older versions before.
gadgetgaz said:
Isn't there a way to go backwards? I know you can't go from 5.1 to 5.0 but I'm sure I've changed ROMs back to older versions before.
Click to expand...
Click to collapse
Yea I agree, but apparently some versions you can't downgrade, I'm sure I read it somewhere just can't remember where
Related
I tried newest uk beta (BTU) recently and i wasn't happy about the battery etc.
Flashed newest lollipop firmware for NEE csc. I have tried so many firmwares and no luck .. :crying:
Do i miss something big time? and i am 100% sure about that firmware is right.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925IDVU2COF8_G925IODD2COF8_G925IDVU2COF8_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Getting this kind of log from odin. note this is copy from another thread, otherwise same but buildnumber is different..
I can't even flash twrp/philz recovery. without getting some error, PIT related.
I can't access recovery by anymeans as it wil boot up to that ''smart switch blablabla'' and pc will say it is not supported etc.
I only can access download-mode.
I have tried flash stock 5.1.1 PIT but it makes no difference.
This is 32gb model. How deep i'm in brown?
Got this working!
First i used odin 3.10.7 -> all fails
Then tried 3.10.6 -> first try successfully only that hidden.img was failed but i extracted from firmware and and flashed it after that.
Hope this helps someone.
if you had used smart switch on your pc, it was a lot easier............:good:
lambik333 said:
if you had used smart switch on your pc, it was a lot easier............:good:
Click to expand...
Click to collapse
Maybe if i would done it in first place, but i didnt. Used odin as it usually will do job. And this case smart switch didnt reconized phone at all. :good:
Hello guys .. i bricked my s6 edge SM-925F.
All what i did was to run by odin a recovery .. after that all went wrong.. Can enter only in Download mode.. i put many recovery even stock on..many of them fail but i got 2 wich says Recovery is not seandroid enforcing.
If i try to install by odin stock room i got fail.. i downloaded like 3 official room from samobile.. same .. all fail dunno why..
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
P.S. : on download mode i got SV Rev. Check Fail Devicde : 3 Binary :1
Please anyone can help mee?
I have exactly the same issue as this, and I can't get into recovery. I have tried multiple stock versions all giving me the same error as you stated.
Try to flash only kernel and older TWRP, then try to restore your backup.
If you don't have backup, then you should know that the first "rule" of XDA is ALWAYS BACKUP, actually, it's mantra it's not a rule
Sent from my SM-G925F using Tapatalk
Search for G925FXXU3COI9 UK BTU version. I had same problem and that one worked for me
I attempted to root my phone through Odin pushing superuser and twrp onto it as tutorials told me to do, and my phone literally goes to the boot logo and then stops. I have tried a million times to flash a stock rom back onto it but it won't push through either Odin or TWRP without error messages. It lets me flash a cyanogenmod rom through TWRP but the screen just goes back when I boot it up. Is my phone done for? Can I fix this somehow?
If you aren't able to reflash the phone with Odin, most likely, you aren't using the correct firmware. Please post your model number, the name of the file you are using, which version of Odin, and what the error you are getting is.
es0tericcha0s said:
If you aren't able to reflash the phone with Odin, most likely, you aren't using the correct firmware. Please post your model number, the name of the file you are using, which version of Odin, and what the error you are getting is.
Click to expand...
Click to collapse
I have tried using both Odin3_v3.10.6 and Odin3 v3.12.3. The files I have attempted to flash are XSG-J700HXXU2BPF9-20160629164434, CAU-J700HXXU1APA3-20160106083224, SM-J700H_J700HXXU1AOK5_J700HOLB1AOK1_5.1.1-MYM, and J700FXXU1AOL2_J700FODD1AOL1_INS_(by_firmwarefile.com).
My phone's model number is J700H/DS. The error I am receiving is <ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> J700HXXU1APA3_J700HOXY1AOL1_J700HXXU1AOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
from Odin and
"sw. rev. check fail. device:2, binary:1" on my phone's screen
Thank you for your reply, I am actually incredibly stupid and left the DS out of my model number and was therefore getting the wrong firmwear. I fixed it.
I have a sprint s6 edge that I rooted but after i rooted it I flashed twrp recovery. Ironically it bricked my phone. I've tried using odin and I got this error: <ID:0/005> Complete(Write) operation failed.
Here's the whole log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Yes, I have all the drivers installed and all of that. I am new to this kind of stuff and I've seen people talk about pit files. I don't kno what those are so I don't know if that would help me. I've been trying to fix this for 3 months please help.
UNICORNSRDABEST said:
I have a sprint s6 edge that I rooted but after i rooted it I flashed twrp recovery. Ironically it bricked my phone. I've tried using odin and I got this error: <ID:0/005> Complete(Write) operation failed.
Here's the whole log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Yes, I have all the drivers installed and all of that. I am new to this kind of stuff and I've seen people talk about pit files. I don't kno what those are so I don't know if that would help me. I've been trying to fix this for 3 months please help.
Click to expand...
Click to collapse
Have you tried SmartSwitch its easier Then odin
osman34 said:
Have you tried SmartSwitch its easier Then odin
Click to expand...
Click to collapse
When I downloaded smart switch I got a side by side error. This happened on 2 different computers. I don't know how to fix it. I also tried using kies but I'm not sure how to get the s/n or imei.
UNICORNSRDABEST said:
When I downloaded smart switch I got a side by side error. This happened on 2 different computers. I don't know how to fix it. I also tried using kies but I'm not sure how to get the s/n or imei.
Click to expand...
Click to collapse
sboot.bin fail is the bootloader is older than your current one. Flash another firmware with a newer bootloader.
If you try smart switch you must fully close odin and phone still needs to be in download mode to do the emergency firmware recovery
callumbr1 said:
sboot.bin fail is the bootloader is older than your current one. Flash another firmware with a newer bootloader.
If you try smart switch you must fully close odin and phone still needs to be in download mode to do the emergency firmware recovery
Click to expand...
Click to collapse
So that means my odin is out of date or the stock firmware?
UNICORNSRDABEST said:
So that means my odin is out of date or the stock firmware?
Click to expand...
Click to collapse
the stock firmware has a older bootloader.
flash a firmware with newer bootloader.
callumbr1 said:
the stock firmware has a older bootloader.
flash a firmware with newer bootloader.
Click to expand...
Click to collapse
I'm still new to his stuff. What is a boot loader?
UNICORNSRDABEST said:
I'm still new to his stuff. What is a boot loader?
Click to expand...
Click to collapse
its part of the firmware package.
try to flash this firmware through odin
https://www.sammobile.com/firmwares/download/119909/G925PVPU4CPL3_G925PSPT4CPL3_SPR/
my s3(i9305) is stuck in download mode with stock recovery on it and ive got odin, but i cant get any stock roms booted on it, cant get onto the phone, and it dont have any working firmware on it...i just want to put it back to stock asap and get the dam thing working again.
any help would be great!!
What output are you getting in odin?
Beamed in by telepathy.
shivadow said:
What output are you getting in odin?
Beamed in by telepathy.
Click to expand...
Click to collapse
the bar is blue
No, there is a 'window' on the bottom left of the app with text in it. What does that text say when you've attempted to flash the phone?. Need all of it, not just the result at the end.
The blue bar means the flash completed successfully but doesn't give any more info than that.
Beamed in by telepathy.
shivadow said:
No, there is a 'window' on the bottom left of the app with text in it. What does that text say when you've attempted to flash the phone?. Need all of it, not just the result at the end.
Beamed in by telepathy.
Click to expand...
Click to collapse
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGPE1_I9300AMNGPF1_I9300BVUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sboot.bin is the bootloader so I presume that it is either locked or corrupt. I'm not sure if that is a pit error or not. You could try to find another file and hope it works but if you're absolutely sure the one you have is good then there's no point. You could try finding a stock rom that doesn't include the bootloader. Also flashing a pit file (only as a very last step) is an option but make sure it is the correct one for your specific model and region etc.
I hate recommending pit file flashing but in this case it could be viable from other reports around the site. Flashing a pit file is a last resort only, I cannot stress this enough.
Beamed in by telepathy.
shivadow said:
Sboot.bin is the bootloader so I presume that it is either locked or corrupt. I'm not sure if that is a pit error or not. You could try to find another file and hope it works but if you're absolutely sure the one you have is good then there's no point. You could try finding a stock rom that doesn't include the bootloader. Also flashing a pit file (only as a very last step) is an option but make sure it is the correct one for your specific model and region etc.
I hate recommending pit file flashing but in this case it could be viable from other reports around the site. Flashing a pit file is a last resort only, I cannot stress this enough.
Beamed in by telepathy.
Click to expand...
Click to collapse
where might i find a stock rom without a bootloader? dont fancy the pit file tbh!!
Try using different USB cables and USB 2.0 ports.
audit13 said:
Try using different USB cables and USB 2.0 ports.
Click to expand...
Click to collapse
ive only got the 1 usb port on my tablet
The sboot.bin is not flashing because the bootloader on the phone is newer than the bootloader in the ROM you are flashing, the ROM is not for your phone, and/or you need to try another computer.
It's unlikely that the bootloader is locked as AT&T and Verizon are the only two carriers I know of who lock down the bootloader.
i'm totally out of my knowledge zone here....i did do thison 1 of my old phones a few years back and some one wrote on a comment exactly how to make it stock again....but i'm buggered if i can find that post again....or thats even if the site still has that thread...can anyone point me in the right direction here please?
Ok this is what i get when i try and flash this:I9300XXUGNB5_I9300EVRGML2_EVR
which i got from sam pass and selected my exact model of phone from my country(uk) and the network i'm using....with odin v3.10
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB5_I9300EVRGML2_I9300BVUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please tell me what i'm doing wrong??
so this is what i'm getting when i'm using odin v3.10 trying to install the correct firmware for my phone from sam pas and selecting the country/network
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB5_I9300EVRGML2_I9300BVUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please point me in the right direction??
Your original post says the phone is a 9305 and you are flashing a 9300 ROM?
yea i'm trying to download I9305XXUFOC1 now but every site i go to its giving me a 5 hour wait time.....is there a faster way i can get it downloaded?
audit13 said:
Your original post says the phone is a 9305 and you are flashing a 9300 ROM?
Click to expand...
Click to collapse
Well spotted, didn't even occur to me..
Beamed in by telepathy.
In use sammobile.com. The download speed for free accounts is not great but I usually start the download and do something else for a while.