Related
Hi friends plz post if found a custom rom and cwm for a55hd
its hardware is almost same as micromax a116
but custom rom for a116 and many recovery flashes got no success
i have lost its stock recovery and imei got invalid after flashing a cwm, that i have backed up before but not getting restore
please post anything valuable,,, developers help please,,
Hey bro, I also have A55 Hd and I have both custom recovery and stock recovery. If you need them then I would post them later in the evening. Custom Recovery is CWM 5x.x.
Check the attached link. It contains both original and CWM recovery for Videocon A55 HD..
[Suggested] Extract the files to the root of the SD card and install Mobile Uncle Tools[MUT] from Play Store..Then select "install recovery" from MUT and then select the appropriate recovery image(either original or CWM) then MUT would install the recovery automatically.
The links are for Google Drive. Reply if you face any problems or pm me. If you are successful then post here so it can help others..
https://doc-0g-ao-docs.googleusercontent.com/docs/securesc/ha0ro937gcuc7l7deffksulhg5h7mbp1/4o3lq844a7kkjqglia0ta792dfn6hip0/1387814400000/10338916088270767484/*/0B4DfcbdyOXrXaE42NGRxbE9VTGs
And last Hit Thanks
Need the V-Store App
Also I would need a favor from you...can you please provide me the V-Store app that comes preloaded in the phone. I need this to complete my ROM, so that I can publish the original ROM so others can use it when required. When I first got rooted I removed this app.
I think you are already rooted. And if you have ever used Titanium Backup can you create a backup of V-Store app and post it to me. In case you are unable to post links in this forum you can forward it to my email - [email protected] ..
Hope my post helps you...and I read that you have problem with IMEI as well..You can let me know, I can help you fix that as well..
Find attached. Created all system apk's of a55HD with appbackup application.
How to boot in stock recovery? Your link for recoveries saying
Really root is working with you? Try to post how you managed.
nanachitang420 said:
Find attached. Created all system apk's of a55HD with appbackup application.
How to boot in stock recovery? Your link for recoveries saying
Really root is working with you? Try to post how you managed.
Click to expand...
Click to collapse
Power off your phone. Then press power button + volume down key. This would take you to recovery.
Sent from my A55HD using Tapatalk
Okie, I've created a new thread explaining the full rooting procedure, installing CWM Recovery and in the future I expect to make available the stock ROM and Custom ROMs.. The link to the thread is http://forum.xda-developers.com/showthread.php?p=49118647#post49118647
Ask all future questions on the new thread.
Guide for Videocon A55 HD Speed Up / Root / Custom Recovery All Listed
Visit Website Blog
Videocon A55 HD - Upgrade
Can anyone tell me How to upgrade my Videocon A55 HD Jelly bean to Lollipop 5.xx ?
PLease do upload the Firmwares if u get one to upgrade or anything extra i didnt mentioned here...
Thank You
Aaaaanuj1 said:
Also I would need a favor from you...can you please provide me the V-Store app that comes preloaded in the phone. I need this to complete my ROM, so that I can publish the original ROM so others can use it when required. When I first got rooted I removed this app.
I think you are already rooted. And if you have ever used Titanium Backup can you create a backup of V-Store app and post it to me. In case you are unable to post links in this forum you can forward it to my email - [email protected] ..
Hope my post helps you...and I read that you have problem with IMEI as well..You can let me know, I can help you fix that as well..
Click to expand...
Click to collapse
Did you get the V store app yet? if not do let me know i can help u
[Q&A] [PORT][RECOVERY] Carliv Touch Recovery v3.0 [Kitkat] for porting to MTK phones
Q&A for [PORT][RECOVERY] Carliv Touch Recovery v3.0 [Kitkat] for porting to MTK phones
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [PORT][RECOVERY] Carliv Touch Recovery v3.0 [Kitkat] for porting to MTK phones. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello, please tell me. Ported CTR v 3 iOcean elite. For a basis took recovery with P780, tailored for your screen resolution, like all good, but there is one at the new mount memory to the computer recording speed is very very low (for example, when copying the firmware of 600 mb- while copying takes about 15 minutes), what to do ?
r-miheev said:
Hello, please tell me. Ported CTR v 3 iOcean elite. For a basis took recovery with P780, tailored for your screen resolution, like all good, but there is one at the new mount memory to the computer recording speed is very very low (for example, when copying the firmware of 600 mb- while copying takes about 15 minutes), what to do ?
Click to expand...
Click to collapse
That could have multiple causes: antivirus software, low class sdcard, usb port old version (1.1, 1.2), bad cable, etc. It's not related to recovery.
@carliv, i have tried the recovery that you have tag for me but, it does not work... It does not boot into recovery , it just loop into a normal way of booting.... Is this already tested? Or I am the first who tried it?
Update: I guess I'm wrong, I have tried to flash it again with an updated Rasher tool and it works but it take a long time to flash it . Thanks Sir @carliv, by any chance who ported it sir?
Sir @carliv , so now that you have verified that it is working with our device you can now add our unit myphone agua rio v2 (with version 2 because theres a myphone agua rio v1 with a jellybean os)
Kyzrael said:
Update: I guess I'm wrong, I have tried to flash it again with an updated Rasher tool and it works but it take a long time to flash it . Thanks Sir @carliv, by any chance who ported it sir?
Sir @carliv , so now that you have verified that it is working with our device you can now add our unit myphone agua rio v2 (with version 2 because theres a myphone agua rio v1 with a jellybean os)
Click to expand...
Click to collapse
For flashing recovery on Mediatek phones is better to use Mobileuncle from phone or SPflashtools from PC. Some people said Flashify works too, but I didn't checked.
I did the port for this recovery, because I did that for other phones too and I thought to do it for this one too. You were lucky I found infos about the phone online, because you didn't provided any.
Ok, I'll add it on working device list, since the test was successful.
carliv said:
For flashing recovery on Mediatek phones is better to use Mobileuncle from phone or SPflashtools from PC. Some people said Flashify works too, but I didn't checked.
I did the port for this recovery, because I did that for other phones too and I thought to do it for this one too. You were lucky I found infos about the phone online, because you didn't provided any.
Ok, I'll add it on working device list, since the test was successful.
Click to expand...
Click to collapse
@carliv, when i try to mount the sdcard0 it keeps on saying "Error Mounting /storage/sdcard0". What would be the problem with that? Is it in the recovery.fstab? Btw, i enjoy using it now. Thanks again so much
Kyzrael said:
@carliv, when i try to mount the sdcard0 it keeps on saying "Error Mounting /storage/sdcard0". What would be the problem with that? Is it in the recovery.fstab? Btw, i enjoy using it now. Thanks again so much
Click to expand...
Click to collapse
It's the voldmanager number for internal sdcard, probably wrong - I told you I didn't have any info about your phone since you didn't provide something, and as I don't even seen this phone I can't know what is that number. If you change that in fstabs it will work well.
carliv said:
It's the voldmanager number for internal sdcard, probably wrong - I told you I didn't have any info about your phone since you didn't provide something, and as I don't even seen this phone I can't know what is that number. If you change that in fstabs it will work well.
Click to expand...
Click to collapse
If by any chance that I want to correct that, where should I look into? Is my dumpchar info will help me to find the correct value or I should also look into the stock recovery's fstab?
Kyzrael said:
If by any chance that I want to correct that, where should I look into? Is my dumpchar info will help me to find the correct value or I should also look into the stock recovery's fstab?
Click to expand...
Click to collapse
Usually the fat block number in dumchar_info is the voldmanaged number, but sometimes you need to look in the phone. There are few methods to find that through adb commands. Search here on xda and you will find that somewhere.
carliv said:
Usually the fat block number in dumchar_info is the voldmanaged number, but sometimes you need to look in the phone. There are few methods to find that through adb commands. Search here on xda and you will find that somewhere.
Click to expand...
Click to collapse
So, i need to use a linux machine to be able to run commands. Ok, I'll try.... Thanks for an early response
I much confuse with where to look in phone.. In phones root? Using root explorer?
Kyzrael said:
So, i need to use a linux machine to be able to run commands. Ok, I'll try.... Thanks for an early response
I much confuse with where to look in phone.. In phones root? Using root explorer?
Click to expand...
Click to collapse
Hm, you easily skip my first clue, which is the easiest one (posting the dumchar_info) and jump to the hardest part, searching the voldmanaged numer in the phone (usually the content of /dev/block/vold will tell you that in a regular phone)....
carliv said:
Hm, you easily skip my first clue, which is the easiest one (posting the dumchar_info) and jump to the hardest part, searching the voldmanaged numer in the phone (usually the content of /dev/block/vold will tell you that in a regular phone)....
Click to expand...
Click to collapse
I have uploaded pictures... I dont know if /dev/block/vold will help me but i found /dev/block/platform is much informative
Kyzrael said:
I have uploaded pictures... I dont know if /dev/block/vold will help me but i found /dev/block/platform is much informative
Click to expand...
Click to collapse
Well, and you still didn't posted here the dumchar_info content....
carliv said:
Well, and you still didn't posted here the dumchar_info content....
Click to expand...
Click to collapse
Sorry I forgot to attach... In mobile mode of posting with pictures I'm only allowed to attach 4 pictures ... Sorry Sir @carliv again . Btw, here my dumpchar_info
Kyzrael said:
Sorry I forgot to attach... In mobile mode of posting with pictures I'm only allowed to attach 4 pictures ... Sorry Sir @carliv again . Btw, here my dumpchar_info
Click to expand...
Click to collapse
Ok, first, if you quote one of my posts don't use mention too (@).
Second, your phone has an emulated internal sdcard. Post here a stock boot and recovery image from kitkat rom. If external sdcard is working, make a backup and copy from it the boot and recovery images if you don't have in official ROM.
carliv said:
Ok, first, if you quote one of my posts don't use mention too (@).
Second, your phone has an emulated internal sdcard. Post here a stock boot and recovery image from kitkat rom. If external sdcard is working, make a backup and copy from it the boot and recovery images if you don't have in official ROM.
Click to expand...
Click to collapse
I cannot attach the zip here so i uploaded my stock boot and recovery img's here :https://mega.co.nz/#!c98ETRqb!em1QWTOBMotIq149hsadnmPRgOiexJo2T1w7ZQTjGSY
Dont worry sir , my phone is still in the pure stock
Help Carliv!!
Hellow Carliv,
I need your help to install carliv recovery with flashtools, not find the "Scatter" file to download, please help
NekoDk said:
Hellow Carliv,
I need your help to install carliv recovery with flashtools, not find the "Scatter" file to download, please help
Click to expand...
Click to collapse
You can create a scatter file with the use of MTKdroid Tools... After creating scattter file use that to flash ur recovery. You can also flash ur recovery without using flashtool, just install rashr tool.apk or mobileuncle tool to flash it via mobile.
Kyzrael said:
You can create a scatter file with the use of MTKdroid Tools... After creating scattter file use that to flash ur recovery. You can also flash ur recovery without using flashtool, just install rashr tool.apk or mobileuncle tool to flash it via mobile.
Click to expand...
Click to collapse
Q.Q but my phone is bricked, how I can create without phone?
It is a M-Horse S80
Thanks!!
NekoDk said:
Q.Q but my phone is bricked, how I can create without phone?
It is a M-Horse S80
Thanks!!
Click to expand...
Click to collapse
Is there no available dump rom for your unit available in the internet? Try to find someone who is similar with your phone then ask him to do a full back up using mtkdroidtools then ask him to send to you the created scatter file
:fingers-crossed:PhilZ Recovery For Canvas Doodle 3!:laugh:
I had seen the thread of Emotion Lollipop where @djdhiraj said the recovery is obsolete and isn't supporting ROMs.
So, after searching a lot I found nothing.
So,i ported a Philz Recovery For the doodle 3 (a102)
I also ported a TWRP Recovery , which worked well but later it my phone stopped booting .
I tried CTR too but no hope.
CWM did not work because MTK Droid Root and Tools gave an error - NO FIND KernalGZ , NO Split Boot Image
At last I tried the Philz recovery which works very good on the doodle 3.
This is PhilZ Touch Recovery 6 based on CWM 6.0.5.1
Recovery attached in the post.
You can flash this recovery.img through SP Flash Tools
Scatter File Download - its in the post's end (attached)
Also u can port your own recovery in the link mentioned in the notepad which is attached below.(Sorry I am a newbie so i cant post links directly)
WARNING!
THE SIZE OF THE RECOVERY IS 5.88 MB (fortunately)
Your IMEI might get affected!
Thanks to
xposedgeek.net and @yuweng for the tools
PhilZ for making the recovery for MT6572
ENJOY!:highfive:
Hope u guys liked it
thanx
AshAssassin said:
:fingers-crossed:PhilZ Recovery For Canvas Doodle 3!:laugh:
I had seen the thread of Emotion Lollipop where @djdhiraj said the recovery is obsolete and isn't supporting ROMs.
So, after searching a lot I found nothing.
So,i ported a Philz Recovery For the doodle 3 (a102)
I also ported a TWRP Recovery , which worked well but later it my phone stopped booting .
I tried CTR too but no hope.
CWM did not work because MTK Droid Root and Tools gave an error - NO FIND KernalGZ , NO Split Boot Image
At last I tried the Philz recovery which works very good on the doodle 3.
This is PhilZ Touch Recovery 6 based on CWM 6.0.5.1
Recovery attached in the post.
You can flash this recovery.img through SP Flash Tools
Scatter File Download - its in the post's end (attached)
Also u can port your own recovery in the link mentioned in the notepad which is attached below.(Sorry I am a newbie so i cant post links directly)
WARNING!
THE SIZE OF THE RECOVERY IS 5.88 MB (fortunately)
Your IMEI might get affected!
Thanks to
xposedgeek.net and @yuweng for the tools
PhilZ for making the recovery for MT6572
ENJOY!:highfive:
Click to expand...
Click to collapse
Dude you rock
Thanku so much for this
---------- Post added at 09:26 AM ---------- Previous post was at 09:19 AM ----------
AshAssassin said:
:fingers-crossed:PhilZ Recovery For Canvas Doodle 3!:laugh:
I had seen the thread of Emotion Lollipop where @djdhiraj said the recovery is obsolete and isn't supporting ROMs.
So, after searching a lot I found nothing.
So,i ported a Philz Recovery For the doodle 3 (a102)
I also ported a TWRP Recovery , which worked well but later it my phone stopped booting .
I tried CTR too but no hope.
CWM did not work because MTK Droid Root and Tools gave an error - NO FIND KernalGZ , NO Split Boot Image
At last I tried the Philz recovery which works very good on the doodle 3.
This is PhilZ Touch Recovery 6 based on CWM 6.0.5.1
Recovery attached in the post.
You can flash this recovery.img through SP Flash Tools
Scatter File Download - its in the post's end (attached)
Also u can port your own recovery in the link mentioned in the notepad which is attached below.(Sorry I am a newbie so i cant post links directly)
WARNING!
THE SIZE OF THE RECOVERY IS 5.88 MB (fortunately)
Your IMEI might get affected!
Thanks to
xposedgeek.net and @yuweng for the tools
PhilZ for making the recovery for MT6572
ENJOY!:highfive:
Click to expand...
Click to collapse
Plz provide flashing procedure
Thanx in advance
Thx but the note4.zip doesn't work yet
Djdiraj a bit help..
We am trying to port roms here
I think we should port the ROM xperia z2 ROM
Wat do u say??
Plus there is a MIUI ROM which has no updater-script
If we write one, then we should be able to install it.
miui rom
It would work after writing updater script i am sure !!!!!
Good
Dear dsbhai,
Thx fr this
All the best!
ashu.s4 said:
Dear dsbhai,
Thx fr this
All the best!
Click to expand...
Click to collapse
Thanks!! Can u provide me the miui rom with his updater script!! thanks in advance
---------- Post added at 02:14 AM ---------- Previous post was at 02:03 AM ----------
ashu.s4 said:
Thx but the note4.zip doesn't work yet
Click to expand...
Click to collapse
Dear ashu.s4 note4.zip is working i tried it is working but it has some bugs rom keeps crashing after 30 mins but its ui is nice b/c of its crashing have return back to my stock KitKat rom if u want to install note 4 zip in philz recovery wipe data facory reset & wipe cache and donot wipe anything extra then install note 4 zip i am 200 percent sure it will work for 1st time it won't work for me b/c i have cleared whole partition of rom u dont wipe it it will work
K dsbhai I'll try
As far as updater script goes , it is a tough job .
My exams r goin on .
I won't be able to write it now....
ashu.s4 said:
K dsbhai I'll try
As far as updater script goes , it is a tough job .
My exams r goin on .
I won't be able to write it now....
Click to expand...
Click to collapse
Ok after finishing ur exams both will try it for writing updater script ..
And thanksfor ur time!!
dsbhai said:
Ok after finishing ur exams both will try it for writing updater script ..
And thanksfor ur time!!
Click to expand...
Click to collapse
I saw the package.......
The package had an update-script(Amend) and not an Updater-script(Edify) which all recoveries support.
Also this rom might not work beacuse the person who made this rom has just mixed all the files together.
I found this out when I saw there were 2 systemUI.apk in the folder priv-app and app.
Also as this rom is based on 4.2.1(As it says) has priv-app folder which is only present in 4.4 and above.
I don't think this ROM is going to work.
Also this rom was made by android kitchen.
Dear dsbhai,
Let's create another post where everyone can see what is happening..
Plus while searching on google a person called singh.harish on xda has made a S5 rom for doodle 3
But he posted that in the wrong section of the forum, so the admin closed the thread.:crying:
I sent him a personal message to repost that rom
You say him too.
Btw anyone found any bugs with the recovery.....
Or does anyone need the procedure of how to flash??
ashu.s4 said:
Dear dsbhai,
Let's create another post where everyone can see what is happening..
Plus while searching on google a person called singh.harish on xda has made a S5 rom for doodle 3
But he posted that in the wrong section of the forum, so the admin closed the thread.:crying:
I sent him a personal message to repost that rom
You say him too.
Click to expand...
Click to collapse
Ya will tell him personally nd which type of thread should we create!!!! I read his thread he said that rom is under testing!! I have created a thread named as micromax Doodle 3 a102 development
Give me the link and thx fr creating the thread.
this is the link
ashu.s4 said:
Give me the link and thx fr creating the thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/general/custom-roms-doodle-3-official-t3210992
Hai I tried philz recovery for doodle 3 it works awesome and I would like to add that u can also flash the recovery using the app FLASHIFY its available on googleplay and THANK YOU XDA
To everyone who is visiting here,
If you are searching for ROMS or other types of recoveries then please visit -
https://micromaxa102customroms.wordpress.com
A warm hello this wonderful community.
Ever since I switched to android i have almost always trusted this forum for help and most of the time found what i was looking for.
This is my first post here.
I recently bought new LAVA Iris X8.
The phone works splendid and I love it. But I really wish to add more fun to it and install a custom ROM that can make the overall ui super smooth and also improve battery life.
Searched everywhere but could not find any custom rom or recovery for this device.
Please can someone provide me a custom rom.
I am only looking for a smooth ui and improved battery life.
please help....
bump
No one interested to help????
Well.... I am on my way to do this myself... At least I think so right now...
Got info from here and some other websites...
I have built cwm recovery for lava x8 and installed successfully
Also installed PureperformanceX stock 1.4
Will soon post details and cwm recovery soon...
Hope it will be helpful to others....
update
Hey guys...
looks like everyones is busy...
Nobody to help me...
jus a little update:
I have rooted my Lava X8 wit h kingoroot
and
Installed CWM recovery using MTK Droid Tools...
Also need to rename file /system/recovery-from-boot.p" so that
CWM recovery is not automatically replaced by system during boot..
Everything is going good right now...
Looking to get Lollipop or some other good custom rom now....
:good:
Custome ROM for Lava IRIS x8
hi Sami2233,
Please share the processes you followed to install CWM custom recovery and install PureperformanceX stock 1.4. I would like to try that on my X8 which is already rooted.
Please share the link of CWM recovery if possible
Thanks in Advance,
Fazil Jabbar
fazilcjabbar said:
hi Sami2233,
Please share the processes you followed to install CWM custom recovery and install PureperformanceX stock 1.4. I would like to try that on my X8 which is already rooted.
Please share the link of CWM recovery if possible
Thanks in Advance,
Fazil Jabbar
Click to expand...
Click to collapse
Hi..
At least someone responded...
Well... You will need your stock recovery.img from your device... Get it using sp flash tools..
Then with mtk droid tools you can make cwm recovery for your phone...
I followed the tutorial on AndroidHow website with article titled "How to Make/Flash CWM Recovery Without Rooting". Just Google it.. You will find it...
Follow all steps and it works...
Sent from my irisX8 using XDA Free mobile app
At last there is a way to flash recovery to my x8...and hey guys tell me if everything is OK plz...
Sent from my irisX8 using XDA Free mobile app
aravindh80 said:
At last there is a way to flash recovery to my x8...and hey guys tell me if everything is OK plz...
Sent from my irisX8 using XDA Free mobile app
Click to expand...
Click to collapse
Yes CWM recovery works fine.. No problem until now...
But PurePerformancesX 1.4 didn't work good.. Instead I felt like phone was overheating...
Then removed it and tried latest FlyOnMod
This works wonderful....
Sent from my irisX8 using XDA Free mobile app
Custom Rom for x8
Please share if any one found a custom ROM for Lata iris x8. By hours of searching i could only find below link for stock ROM.
needrom.com/download/lava-iris-x8/
Thanks & Regards,
Fazil Jabbar
fazilcjabbar said:
Please share if any one found a custom ROM for Lata iris x8. By hours of searching i could only find below link for stock ROM.
needrom.com/download/lava-iris-x8/
Thanks & Regards,
Fazil Jabbar
Click to expand...
Click to collapse
Me too...
Didn't find any custom rom...
I think the lollipop themed ROM for "intex 8x-1000" created by Tech N You will work but needs to be ported....
Sent from my irisX8 using XDA Free mobile app
how to flash stock ROM on iris x8
I already tried everything. I have a stock ROM of iris x8 which I downloaded from need ROM but SPFT can't flash that stock ROM. Every time I switch off and connect my phone to the computer SPFT won't recognize it . also I was unable to create a stock ROM because of this. I have already rooted my phone but there is a problem with it. Every time I switch it off and turn it on , the root somehow disappears. I don't know what happened. Also my in app purchases won't work. I got frustrated and tried freedom but it won't work either nor lucky patcher will work. ( I checked that in app purchases are not disabled but still they don't work) . I also tried booting in recovery mode and even installed appps from play store to do so but I was unable to boot in recovery mode . I have already tried everything I could and really frustrated. Please provide me the exact steps you can go through to flash a stock ROM for iris x8 . also I would like to if it is possible to install CMW or TWRP in iris x8 .( if yes I would love to know the steps.) please help me.
Regarding the root disappear problem..
That happens because of the "/sysyem/recover-from-boot.p" file..
Just root once.. Use ES explorer to go to system directory and rename that file...
Root with kingroot or iroot...
Pls search before complaining... These problems already have solutions posted here...
Sent from my irisX8 using XDA Free mobile app
Thanks very much. But....
SaMi2233 said:
Regarding the root disappear problem..
That happens because of the "/sysyem/recover-from-boot.p" file..
Just root once.. Use ES explorer to go to system directory and rename that file...
Root with kingroot or iroot...
Pls search before complaining... These problems already have solutions posted here...
Sent from my irisX8 using XDA Free mobile app
Click to expand...
Click to collapse
I can't flash any ROM , not even CMW recovery because SPFT won't recognize my phone after I connect it in switched off state. Do you have any solution to that...????
Please provide a way to do that. I want to flash the stock ROM after the problem is solved....
SaMi2233 said:
Regarding the root disappear problem..
That happens because of the "/sysyem/recover-from-boot.p" file..
Just root once.. Use ES explorer to go to system directory and rename that file...
Root with kingroot or iroot...
Pls search before complaining... These problems already have solutions posted here...
Sent from my irisX8 using XDA Free mobile app
Click to expand...
Click to collapse
In my case the solution which you provide doesn't work at all.
For 1st 2 weeks my root would not disappear even switching on / off but suddenly it started. Then root started to reset within hours.. Also the SUPERSU App was not functioning ( error : su binary not working on device above 4.3.3) :banghead:
I got scared and did a factory reset which solved the problem of root being reset every now and then ( it still resets after I switch it off /on .
But factory resetting brought a whole bag of other problems like in-app-purchase not working and also other apps which require root can't gain it because I can't install SUPERSU anymore ( error: failed to install su binary please restart your device and try again but it won't work even after restart.) ..
So I am stuck with default kingouser app which is not supported by many other applications ....
Can I be facing this problem because of factory resetting my phone without properly unrooting it..:what:
Sorry for asking all of the questions above..
Today I was able to flash the stock ROM after updating the drivers
Also KINGOROOT was unable to root my phone so I found another solution.
There is a rooting app called KINGROOT ( kingroot.net ) . This app has both android app and a PC app. I was able to root my phone easily with their android app.
More interestingly its PC app directly installs CWM recovery. (PC app is only in Chinese :banghead: but the android app is in English.).
You can also search the KINGROOT in xda threads.
Thanks for the support and answering my annoying questions .
Glad to hear that your problem is solved..
I too rooted with the kingroot app from pc( and thats what i suggested above) but it didnt install cwm ..
This is a place where you learn new things..
And the learned ones share thier knowledge..
So feel free to ask questions.. :thumbup:
Sent from my irisX8 using XDA Free mobile app
Can anyone please post links of custom ROMs or mods for iris x8 .
Thankx in advance..
Lava iris x8
Hlo gys gud to see u here... Recently my friend was successful to make a touch recovery for our phone... It is carliv touch recovery. Now i m working on rom one rom is successfully ported by me... I will share it soon.. I also have a fb group, named lava iris x8 development
Just wait for some days more..
Lollipop based custom rom is ready
I will share it in few days
Stay tunned guys
guys link is here for MIUI 6 for lava x8
http://en.miui.com/thread-124845-1-1.html
here are the roms for our lava iris x8
and most of them are cool including hive and cm 12.1
miui and material ui are the best and cm 12.1 is almost bugless
http://forum.xda-developers.com/android/software/custom-roms-lava-iris-x8-t3156367
Please, have been having issues rooting my Tecno L8plus I tried all the possible root apps not working,and I don't know to go about Fastboot and the likes since have never done it before.. My build number is (L8PLUS-H805C1-L-160907V41).PLS I want a explanatory reply so I don't get it wrong
Jidexkid said:
Please, have been having issues rooting my Tecno L8plus I tried all the possible root apps not working,and I don't know to go about Fastboot and the likes since have never done it before.. My build number is (L8PLUS-H805C1-L-160907V41).PLS I want a explanatory reply so I don't get it wrong
Click to expand...
Click to collapse
You'll need to root via custom recovery
mod edit - blog links removed
If it doesn't works for you then simply extract the scatter file and stock recovery.img then post the link here so I can port a custom recovery for you
Hovatek said:
You'll need to root via custom recovery
mod edit - blog links removed
If it doesn't works for you then simply extract the scatter file and stock recovery.img then post the link here so I can port a custom recovery for you
Click to expand...
Click to collapse
Pls can i send my scatters files and stock recovery so u can port twrp for my device which is techno l8 plus
Routing my Techno L8 plus
Please port for Techno L8b plus
Build Number L8-H80SE1-L-160907V55
Please I still need this TWRP though fire nine the build number is Build Number L8-H805E1-L-160907V55