Please help me.I got this phone from korea.S2 hd lte.I decided to install Slimrom and flashed cwm
for e120s
So went to pda and flashed it and after that I rebooted it.Then it went to this horrid message and wont boot.
Help me please.I would be thankfull.
imgur.com/ MivTTTP
It says Kies something but dont understand korean language
Odin said:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Im beginna too but imma gonna try help ya
Unninstal Kies drivers. From what I heard they can cause problems. And good usb cable and not using usb hub can be helpful too.
And try again.
I'm begginer too but you can try it while I'm first to reply
....
And you could say that there is bonus space in url I didn't realized it when I first tried to check it
EDIT1: Dude you tried it?
Related
hey everyone i have registered for the website to try and get my phone working again! By reading around the forums i believe that my phone is not BRICKED.
PHONE:
Samsung
Telus
T959D
TRIED:
Tried to root it using ODIN v1.3
RESULT:
I am not allowed to post links yet of the screen shot so here's how it FAILED.
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> zImage
<ID:0/008> recovery.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It did not work and when i try to BOOT it normally, it is stuck on a PHONE....!....COMPUTER screen
Also TRIED:
Super One Click 2.1.1 shortfuse
RESULT:
Stays at "waiting on device"
THEN tried to install drivers and now it FREEEZES on "waiting on device"
Wow this is complicated. can anybody PLEASE tell me what i need to do to FIX this and ROOT it??
ALSO i cannot reach USB DEBUGGING because i cannot get past the PHONE.....!.....COMPUTER screen.
We're going to need a little bit more information, first, what firmware version is your phone at?
Second, is Kies running anywhere in the background?
A picture of the "Phone....!....Computer" screen might help as well, are you completely unable to flash?
iam tryin to load my stock rom bt i am not able to update it... i tried to root my phone .. when i tried to load the insecure kernal the yellow exclamation came up nd den it neva booted .. now i am tryin to load the stock rom bt it failed .. can any1 help me
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
rom : xwkf3
India
I think its because you did something with the PIT or the re-partiton section in Odin. Check if these areas are untouched. The box next to PIT should be left blank, and the re-partition checkbox should be left unchecked.
Of course, I may be wrong, I'm a newbie myself. :/
crobat said:
I think its because you did something with the PIT or the re-partiton section in Odin. Check if these areas are untouched. The box next to PIT should be left blank, and the re-partition checkbox should be left unchecked.
Of course, I may be wrong, I'm a newbie myself. :/
Click to expand...
Click to collapse
the pit and the repartition was untouched
Its common to see this if u tried to shift between a CM7 based ROM and the stock ROM. U will need to put your phone in download, add pit and other files, tick re-partition and flash the stock ROM. Then u will be able to boot normally.
I think there is a problem with the rom, maybe download problem, or it's not suitable for your mobile.
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
Same issue with me, have you got any solution to this? I have tried all resorts but getting stuck at below -
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i din get any solution
please close this thread
hey,
iam tryin to load my stock rom bt i am not able to update it... i tried to root my phone .. when i tried to load the insecure kernal the yellow exclamation came up nd den it neva booted .. now i am tryin to load the stock rom bt it failed .. can any1 help me
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
rom : xwkf3
India
neerajganga said:
hey,
iam tryin to load my stock rom bt i am not able to update it... i tried to root my phone .. when i tried to load the insecure kernal the yellow exclamation came up nd den it neva booted .. now i am tryin to load the stock rom bt it failed .. can any1 help me
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
rom : xwkf3
India
Click to expand...
Click to collapse
Ok, please try the following (if not tried already):
1. Use another USB connection.
2. Use another USB cable.
3. Restart Odin.
4. Restart your computer.
5. Re-install drivers for your phone - e.g. using KIES.
6. Re-download the ROM or just use another (stock) ROM for your phone and region.
Good luck !
Please close this thread
Hi,
I am trying to install a custom ROM on my phone. I have the i9300 version and I am following this guide:
http://forum.xda-developers.com/gal...covery-clockworkmod-touch-6-0-3-2-gt-t1719744
I am using the version attached, even though it looks a little old. I have done nothing to the phone before this so it is a stock OS.
I have booted in to download mode and flashed using odin, Odin says everything went ok and does a restart:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
<ID:0/009> Added!!
After this I try to boot in to recovery mode and it is not the version I see on the video and there is no touch. The Rom I choose will then not install correctly. I guess that its not the clockwork mod, any idea on what I am doing wrong?
Thanks
-Howard
In the end of the guide there is:
"Stock Recovery being reflashed after a reboot?..."
May be You have stock recovery after reboot?
And have You tried Samsung toolkit? http://forum.xda-developers.com/galaxy-s3/orig-development/samsung-galaxy-s3-unified-toolkit-v8-0-t1703488
Hi,
Just tried that, same issue. It's like it can't get root. No errors thrown and odin seems happy and reports it's "passed"
Hi guys.
im trying to flash G530H with odin and i have this error mesage:
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
what can i do? i tried with an pit file, but its not works
Please check that repartition is not ticked in odin