hello,
i never posted here before but i am following this site for a while and flashed lots of roms using the data here.
i got into a problem trying to flash the kitkat on my HTC sensation 4G.
i am using ATM the android 4.2.2 CM 10.1 albinoman887 rom.
i tried installing the android 4.4.1 according the instructions posted by android1234567 here:
http://forum.xda-developers.com/showthread.php?t=2530073
i did factory factory reset, cache wipe, and davlik wipe
after that flashed the Kernel Aroma installer, the rom and the gapps from this link.
after i flashed them i rebooted and the phone doesnt pass the reboot screen, got stuck on it for few seconds and then restart and stuck again.
could anyone help me resolve this?
thanks ahead.
Dan
ok
if mean bootloop then again do the same step but wipe the dalvik cache,data,cache means clean your phone and then install the rom u will out of boot loop
tried it, it didnt work, still bootlooping.
when i install the gapps file it says it detects 4.4 rom.
any other ideas?
thanks for the help
yesterday i installed CM12 on my sony xperia T (mint)
i installed the OS and the GApps with no problem except one: some apps couldn't access the external SD
i tried many tricks and guides but ultimately decided to reinstall CM
I did a data wipe/factory reset, flashed CM12, reboot into system, reboot into recovery, flashed GApps, cache/dalvik wipe out, reboot into system and now the GApps keep crashing
all the time
i've tried with the GApps found in the cyanogenmod page and the paranoid GApps
I've tried not installing them from GApps but rather installing the google play and google play services apk, and the services keep crashing
any ideas on what to do?
what is causing all of this?
update: i flashed cm11 and GApps 4 and it works without a problem, which just makes everything more confusing
update2: after successfully flashing cm11 and the gapps, i once more tried flashing cm12, which worked by itself, but when i flashed the gapps i got the same crashes again
S3 in bootloop after install Paranoid 5.1
Hi all!
I'm in troubles with my S3.
I downloaded paranoid 5.1 for S3 webparanoird /legacy/i9300 (pa_i9300-5.1-20150822.zip), then I saw that I had to download GAPPS , so I downloaded: androidrootz . com/2015/03/download-android-51x-lollipop-pa-gapps.html (STOCK version), and finllay I read that was recommended to use boeffla-kernel, so I went to his web and downloaded last version (boeffla-kernel-4.0-alpha13-CM12.1-NG-i9300.recovery.zip).
After get it all, I put it in the SDCard, I when in recovery, I did Wipes: dalvik, cache and data. Then I install in this order (I read this order somewhere) ROM, then, GAPPS, then wiped cache again, finally I install Boeffla kernel. Then wiped again dalvik and cache and rebooted the phone, but before reboot TRWP said If I wanted to root the phone, so I accept. Finally, phone restart, but is in bootloop from more than 30 mins.
How can -I make run the device,??
Thanks in advance
Shudy
xShudyx said:
Hi all!
I'm in troubles with my S3.
I downloaded paranoid 5.1 for S3 webparanoird /legacy/i9300 (pa_i9300-5.1-20150822.zip), then I saw that I had to download GAPPS , so I downloaded: androidrootz . com/2015/03/download-android-51x-lollipop-pa-gapps.html (STOCK version), and finllay I read that was recommended to use boeffla-kernel, so I went to his web and downloaded last version (boeffla-kernel-4.0-alpha13-CM12.1-NG-i9300.recovery.zip).
After get it all, I put it in the SDCard, I when in recovery, I did Wipes: dalvik, cache and data. Then I install in this order (I read this order somewhere) ROM, then, GAPPS, then wiped cache again, finally I install Boeffla kernel. Then wiped again dalvik and cache and rebooted the phone, but before reboot TRWP said If I wanted to root the phone, so I accept. Finally, phone restart, but is in bootloop from more than 30 mins.
How can -I make run the device,??
Click to expand...
Click to collapse
boeffla alpha 13 is based on latest unofficial cm12.1 release 7 by Justarchi, which was released some days ago. Your desired ROM is older (08.22) so maybe it does not support the newer kernel. try to cleanly flash the rom and gapps again without flashing any additional kernel (wipe system, data, cache, flash rom then gapps, no additional steps needed). If it boots with stock kernel. you can try different older releases of boeffla kernel if one of them boots. if you want to go back to stock kernel, you simply have to reflash the rom without wipe (data will be kept)
btw, your desired gapps seems to be a bit old. try some newer one and use a small package (mostly they are called pico/nano or mini package) with only the core gapps needed for playstore and download all additional gapps you need from playstore. IMO it is the better way. there are many actual and good gapps available, for example open gapps, slim gapps, delta gapps, banks gapps, etc.... (I personally use open gapps pico package)
Darkened_Sky said:
boeffla alpha 13 is based on latest unofficial cm12.1 release 7 by Justarchi, which was released some days ago. Your desired ROM is older (08.22) so maybe it does not support the newer kernel. try to cleanly flash the rom and gapps again without flashing any additional kernel (wipe system, data, cache, flash rom then gapps, no additional steps needed). If it boots with stock kernel. you can try different older releases of boeffla kernel if one of them boots. if you want to go back to stock kernel, you simply have to reflash the rom without wipe (data will be kept)
btw, your desired gapps seems to be a bit old. try some newer one and use a small package (mostly they are called pico/nano or mini package) with only the core gapps needed for playstore and download all additional gapps you need from playstore. IMO it is the better way. there are many actual and good gapps available, for example open gapps, slim gapps, delta gapps, banks gapps, etc.... (I personally use open gapps pico package)
Click to expand...
Click to collapse
Ok I'm gonna try as you do, with pico gapps from oppengaps.
Just one question more, where can I take origina kernel? just to have if any thing goes wrong.
And thanks for the answer! (I'll say something about hoes it goes)
xShudyx said:
Ok I'm gonna try as you do, with pico gapps from oppengaps.
Just one question more, where can I take origina kernel? just to have if any thing goes wrong.
And thanks for the answer! (I'll say something about hoes it goes)
Click to expand...
Click to collapse
Darkened_Sky said:
boeffla alpha 13 is based on latest unofficial cm12.1 release 7 by Justarchi, which was released some days ago. Your desired ROM is older (08.22) so maybe it does not support the newer kernel. try to cleanly flash the rom and gapps again without flashing any additional kernel (wipe system, data, cache, flash rom then gapps, no additional steps needed). If it boots with stock kernel. you can try different older releases of boeffla kernel if one of them boots. if you want to go back to stock kernel, you simply have to reflash the rom without wipe (data will be kept)
btw, your desired gapps seems to be a bit old. try some newer one and use a small package (mostly they are called pico/nano or mini package) with only the core gapps needed for playstore and download all additional gapps you need from playstore. IMO it is the better way. there are many actual and good gapps available, for example open gapps, slim gapps, delta gapps, banks gapps, etc.... (I personally use open gapps pico package)
Click to expand...
Click to collapse
OK, I have installed with out more problems.
What I have done:
I install first of all, the Stock rom, to run the phone. (so the pone was as stock)
then.
- Downloaded TRWP for I9300, and flashed with Odin.
- Copied Rom Paranoid, PicoGapss from OppenGapps and boefflakernel (this time, this version to be sure: boeffla-kernel-4.0-alpha1-CM12.1-NG-i9300.recovery)
- Restarted phne in recovery mode, and whiped Data, system, cache and Dalvik.
- Installed from SD, first the rom, then the gapps, and restarted the phone, but didnt worked, so I go again to recovery
- Install Boeffla Kernel, whiped chache and dalvik, and restarted again.
- TRWP asked for root the phone, so YES ! XD
The waint less than 5 mins, and phone started .
Thanks for all the help!
@xShudyx: Paranoid official is imo the only S3-ROM, which came and still come with non-booting kernel. So think about its usability. As mentioned here, alpha 3 or Anykernel alpha 4 works. But they are outdated too.
I had Unofficial 5.1.1 installed on my Samsung Galaxy S3 GT-i9300. I updated my device via CM Updater to CM13 6.0.1 Marshmallow. After updating, I am getting an error Google Play services has stopped, unfortunately. I cannot access any Google App.
I've flashed the GApps through OpenGapps. But after flashing GApps, phone stucks on Bootloop. I've tried many variants (pico, nano, stock) but none of them worked. I am still stucked at boot screen.
HELP!
zackygaurav said:
I had Unofficial 5.1.1 installed on my Samsung Galaxy S3 GT-i9300. I updated my device via CM Updater to CM13 6.0.1 Marshmallow. After updating, I am getting an error Google Play services has stopped, unfortunately. I cannot access any Google App.
I've flashed the GApps through OpenGapps. But after flashing GApps, phone stucks on Bootloop. I've tried many variants (pico, nano, stock) but none of them worked. I am still stucked at boot screen.
HELP!
Click to expand...
Click to collapse
Definitely Gapps problem.
1) Backup your data.
2) clean install Marshmallow rom (wipe data/ factory reset & install)
3) look for the correct Gapps (slim zero Gapps work for me)
You might know, but just telling - make sure the Gapps is for Android 6.0
P.S: don't panic and flash several things at once. Maybe you haven't clean flashed the CM 13, that might be the reason.
Clean flash 13.0 and don't boot yet after and go back to recovery, instead flash gapps immediately after flashing the rom. If you dont then you're going to have a bad time. Hope I helped
Done. Flash CWM and Boom
Thank You @sashankps. Slim Zero Gapps worked for me.
What I did?
1. Installed CWM Recovery.
2. Wiped everything.
3. Installed CM 13 (6.0.1)
4. Flashed Slim Zero Gapps.
5. Done.
PS: For future readers, please note that do not wipe cache/data after installing Gapps. After finishing above steps directly Reboot your system.
zackygaurav said:
Thank You @sashankps. Slim Zero Gapps worked for me.
What I did?
1. Installed CWM Recovery.
2. Wiped everything.
3. Installed CM 13 (6.0.1)
4. Flashed Slim Zero Gapps.
5. Done.
PS: For future readers, please note that do not wipe cache/data after installing Gapps. After finishing above steps directly Reboot your system.
Click to expand...
Click to collapse
Glad it helped.
I was a CWM recovery user myself, but the development is static, I would suggest you move on to TWRP - chances of you encountering flashing problems is less.
Next Time.
sashankps said:
Glad it helped.
I was a CWM recovery user myself, but the development is static, I would suggest you move on to TWRP - chances of you encountering flashing problems is less.
Click to expand...
Click to collapse
I don't like the UI of TWRP but Next time I'll surely try TWRP. Maybe while flashing Android N
Thanks a lot! Reply via Samsung Galaxy S3 running 6.0.1
Hi,
I rooted my phone back in August. I made a backup of the rooted device. I have reset it numerous times. This time it will not work. I started without gapps the first time. I re-did the backup and did gapps but my phone is stuck on android is upgrading after it optimizes apps. I have Philz touch Clock work. I also have liquid smooth but it doesn't appear when I reboot. I have the liquid smooth file on my sd so i can install ls zip and then gapps and the phone will boot up so my phone is on on. The setup wizard fails and I cant access anything. I've tried different gapps 5.1 4.4.2(orignal one), 4.4.3 not compatible. I'm assuming i didn't brick it because it does start and go to myregular phone display.I don't know if something was updated with samsung which made my backup or gapps not work correctly. Any help would be greatly appreciated. I have wiped rom, davlik, cache, installed backup...same process install liquid smooth first. Ive done my backup without gapps and it starts but all apps fail because no gapps.