I want to install cwm recovery on my MT6589 phone by the method at http://forum.xda-developers.com/showthread.php?t=2519432 because my phone is not in the supported list.
Suppose, the tool fails to manufacture cwm properly. Then,
1. Will I a be able to turn on the phone normally?
2. What will happen if I try to boot into recovery?
3. Suppose I have a backup of the stock recovery. Can I reflash it so that I get my original recovery back?
4. How can I take a backup of the stock recovery?
5. Suppose the phone gets bricked and I cannot turn it on by any way. Can I restore it by any way?
Thank you for answering my post.
Related
I keep trying to get in, but I'm always getting sent to the stock recovery... this is what i'm doing
first I installed root access... Update.zip is in the internal memory (if i put it on the SD card, when I click reinstall it says file isn't found . . . ?), Update.zip is still there (not sure if I was supposed to remove it)
1. Open Rommanager
2. Clck Flash Recovery ClockworkMod Recovery
3. Pick Vibrant (MTD)
4. Pick ClockworkMod 2.x
5. Click Reboot into Recovery
when I do this it brings me to the stock recovery, tried about 3-4 times now with no success
Question: Are you on the stock rom?
If so, you can select "Galaxy S Vibrant" in Rom Manager to flash CWM, then reboot to recovery. The MTD one I believe is for 2.3 roms that can't boot into CWM via 3 button combo.
first off u have root correct? u have to install packages twice first. Then u will end up in green recovery. Then from green recovery flash any rom. But if ur trying to flash cm, u wanna pick 3x not 2x.
Ur update package could be corrupt, get a new one.
nevermind, i figured it out, i just simply rooted it with CWM manually instead
Hi,
I finally unlocked the BL on my Atrix (4.5.91 from AT&T)
I downloaded ROM Manager and installed CWM Recovery. I managed to boot into recovery from ROM Manager once but now it's not working.
I get the Motorola Logo and then it switches to the android logo with an exclamation mark
I was thinking of flashing the touch recovery, found information here:
http://www.addictivetips.com/mobile/install-clockworkmod-recovery-touch-on-motorola-atrix-4g-how-to/
Is there a newer version? Are these instructions accurate? Do I need to be in fastboot to do this?
Also, I never flashed a ROM before
I really need a clear NOOB guide for doing this and would appreciate recommendations for ROM (if possible, ones that have Hebrew)
Thanks!!!
before you start digging an even bigger hole... STOP
you've already installed cwm so I don't know why you would need to install another version? Right now you need to get your phone up and running again.
Try these steps... power up phone holding the volume down button to get into recovery. Did that work? If so you should see the recovery menu - select data/facory reset and press power to select and then try and reboot system... does that work?
If not I think you'll need to flash the sbf file using rsd lite. Instructions are easy to find on here. Good luck.
I think I didn't explain myself properly.
The phone works 100%, I simply cannot boot into CWM recovery
when I power up holding the volume down button I get to what I think is the phone's default recovery. I get Fastboot as the first option and I can browse through with the volume down button
Anyways, what I would like to learn how to do is safely flash CWM Recover Touch (just because it's easier to use) and Flash ROMs
Thanks!!
Insure that rom manager is up to date, then reflash cwm recovery & try booting into recovery again.
www.HostileSlothRecords.blogspot.com
OK, I re-flashed CWM recovery and it's working now
Before I proceed, I would like to backup my current AT&T ROM.
1) do I do this through th Backup and Restore in the recovery?
2) is this called NANDROID backup?
3) is it safe to restore from it?
I created a backup and again it does not boot into recovery. same issue
Will I always need to reflash it after each time?
OK, it only boots into recovery once after I flash it. Even if I don't do anything
ROM Manager is the most recent version (5.0.0.7)
Recovery is the most recent version according to ROM Manager (5.0.2.0)
Anyone? please help
mickeycohen said:
OK, I re-flashed CWM recovery and it's working now
Before I proceed, I would like to backup my current AT&T ROM.
1) do I do this through th Backup and Restore in the recovery?
2) is this called NANDROID backup?
3) is it safe to restore from it?
Click to expand...
Click to collapse
1) yes
2) yes
3) yes
mickeycohen said:
I created a backup and again it does not boot into recovery. same issue
Will I always need to reflash it after each time?
OK, it only boots into recovery once after I flash it. Even if I don't do anything
ROM Manager is the most recent version (5.0.0.7)
Recovery is the most recent version according to ROM Manager (5.0.2.0)
Click to expand...
Click to collapse
Flash the recovery through ROM Manager one more time, boot to recovery, and flash the latest version from here: http://forum.xda-developers.com/showthread.php?t=1475444
See if that one stays working.
i have bricked my phone so want to flash with rom to restore it. i can accses only android recovery mode so i know to flash rom i must have clockworkmod or something recovery mode so i want any .zip flashable(in android recovery mode) file It does not matter it will be cwm or somthing like that to restore my phone and can you give me download link to restore my android?
Hello,
I have just successfully rooted my S3 using "Heimdall Frontend" following the tutorial here:
However I found initially when leaving "No Reboot" unchecked I was unable to boot into CWM until I checked no Reboot then once the flash was complete I manually went into CWM by holding the recovery keys.
I then installed the SuperSu zip file on my SD card and rebooted my phone into it's newly rooted state.
HOWEVER.. I went to boot my S3 into CWM Recovery to flash a custom ROM and I'm only able to boot into the standard android recovery.. It says on the tutorial that versions 4.1.2+ need to tick "No reboot" otherwise the newer firmware simply wipes over CWM recovery every reboot..
I was under the impression that CWM was there as a safety net in case my phone ever played up and needed to be unrooted?
read this http://forum.xda-developers.com/showthread.php?t=1911726
UPDATE: After using ROM Manager to boot into CWM to create a backup, it gave the option to "Fix reflashing to original recovery after reboot"
Is it a good idea to have CWM permanently flashed as my recovery? How would I revert back to the stock recovery should I want to unroot the device?
Thanks
iamtherealmungo said:
UPDATE: After using ROM Manager to boot into CWM to create a backup, it gave the option to "Fix reflashing to original recovery after reboot"
Is it a good idea to have CWM permanently flashed as my recovery? How would I revert back to the stock recovery should I want to unroot the device?
Thanks
Click to expand...
Click to collapse
You need to read the faqs and guides its all posted and has been asked multiple times .
Just like the title says stuck on boot loop (stock rom) and my volume up button broken so i cant access recovery at all , And adb shows no devices however odin can see the phone So i cant use (adb reboot recovery)
Any way to access recovery ? Or i'm just trapped there?
Flash recovery through Odin. It may boot directly into recovery. Did your button break after you flashed the phone? Are you 100% sure it's broken? I've cracked open an S3 and it's not an easy thing to break.
Use the latest tar from: https://dl.twrp.me/i9300/
Worst comes to worst, reflash stock - root/flash recovery, and then make sure you follow through with the process correctly. I managed to mod an unmodded i9300 4.1.3 to rooted/MM/recovery/F2fs in under an hr.
Turbine1991 said:
Flash recovery through Odin. It may boot directly into recovery. Did your button break after you flashed the phone? Are you 100% sure it's broken? I've cracked open an S3 and it's not an easy thing to break.
Use the latest tar from: https://dl.twrp.me/i9300/
Worst comes to worst, reflash stock - root/flash recovery, and then make sure you follow through with the process correctly. I managed to mod an unmodded i9300 4.1.3 to rooted/MM/recovery/F2fs in under an hr.
Click to expand...
Click to collapse
It boots to system , And Any stock i flash from odin boot loop too as it needs factory reset from recovery (which i can't do)