Hi guys , had a weird problem with my end call/power button.
Out of no where my end call button stopped working. I've found its most annoying because i usually press it to turn the screen off ( lock the screen)
The button doesnt appear to be broken or anything and doesnt work when i press hard
I did a software factory reset this morning via the phone and the button started working again! but its gone 3 hours later again!
I havent recently installed anything and it appeared out of the blue... any help??!
Same problem here! Nothing helped, hard reset, another custom rom, back to stock rom and radio...nothing. Hardware failure, I suspect. Sending it back to factory under warranty. Never had a hardware problem before in 12 yrs using mobile phones.
kinda fixed it now, dont know how though, did a hard rest and formatted mem card, removed everything and didnt reinstall half the stuff i used to have inc all the cabs from here.
its working now on the new rom just fine, but its the first time its happened to me too, and i didnt even do anything !
try a hard reset and wipe and reinstall youre old cabs at ure own risk!
sl1200 said:
Same problem here! Nothing helped, hard reset, another custom rom, back to stock rom and radio...nothing. Hardware failure, I suspect. Sending it back to factory under warranty. Never had a hardware problem before in 12 yrs using mobile phones.
Click to expand...
Click to collapse
Same happens for me too, not all endkey, but my home key is started to work as call key, back and windows key started to work as volume up key.
I am really annoyed guys!! help me out guys!!
any solution mine too is not working since last night did hard rest but still no luck
Hey all, I've been having this problem for a couple of weeks now. At least a couple of times a day, the soft buttons on my A70 stop working properly. When I hit the menu or home button, it brings down the notification bar, and I can't use back or search buttons. I thought it would go away, but it hasn't. I originally thought that it was the Urukdroid that I was running, so I did a full reinitialization, then reinstalled the os clean. And I still get the same problem.
Has anyone else had the same problem? It's really annoying to have to deal with.
And you did a recalibration via recovery menu??
fzelle said:
And you did a recalibration via recovery menu??
Click to expand...
Click to collapse
Yep, try this
i often have this issue on my 101, when it was long at standby, but after a force recalibration did help
Greets,
Lenn
Thx for the responses guys. I tried the recalibration and it seems to be working. I haven't had the problem for the last 2 days. Lets hope that it stays that way.
My SGS2 stopped vibrating. Tried flashing, un-rooting, restoring stock and factory settings. None of these worked.
I am inclined to think that it is a hardware problem.
Has anyone else been dealing with issue? I read some posts on XDA regarding this matter but they were software related as opposed to hardware. Can anyone post instructions on how to fix it or provide any solutions for this issue?
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
UpInTheAir said:
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
Click to expand...
Click to collapse
Cannot get jig in Palestine. Bought the phone from the UK. Sending it back will be problematic. I will look for a repair shop.
Thanks for the quick reply
That's a "bummer" (bad luck). You could make a jig, but as you said that it would be problematic to return. Hope you can sort it easily. Sorry, can't think of anything of use right now.
Sent from my GT-I9100 using xda premium
hey there,
i got the same problem. no more vibrating at all. not with calls or notifications and not as haptic feedback. it started today (was still working in the morning), though i did not drop the phone or anything.
i am still hoping too find that it's a sw-problem. but all potential solutions i find do not help. so i guess i have to contact samsung.
but before i do that i have to get rid of all "hacking".
could you plz tell me what i have to do?
i have now cm9 20120402 nightly.
but i still have a cwm-recovery-backup of the original touchwiz (gingerbread).
-so first i make a backup of my current rom via cwm and of all my apps via titanium and store everything on my pc.
-i flash my touchwiz-backup
-i get one of those: http://www.amazon.de/s/ref=nb_sb_no...ld-keywords=Samsung+Galaxy+S2+USB+Jig&x=0&y=0 , plug it in, wait til its done and remove it again.
after that, samsung will never know i "messed" with the phone??
or do i have to consider/do something else?
tyvm!!
kws
I have the same issue.
When I was on my stock 2.3.5, I found a workaround:
- go into test mode (dial *#0*#)
- find the vibrate button, when you press it, it shouldn't work like you expect
- go back
- plug in your headphones and push the cable a bit to the left
- test vibrate again - this time it should work
- pull the cable out while vibrating, still pushed to the left, vibrations should stay on
I know it sounds crazy but it seems the hardware part that controls the vibrations is near to the jack port - excessive use of headphones, like it was case, must have damaged it somehow.
However, now I'm on CM9, so no test mode for me, I'm achieving the same effect by bashing the back button, so I get semi-constant vibration. I know, It's ridiculous.
Have the same problem here, I think it's software related because the shut down vibration stopped working when I flashed CM9 ICS, I can't remember if it was working anywhere else though. But now I'm back to 2.3.5 and it's not working at all. Did a Factory Reset, Cleaned Cache before and after the flash. Also used the Jig to reset my counter. Any clues?
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
dajomas said:
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
Click to expand...
Click to collapse
I saw something similar on CM9 thread, they said it could be a "bad flash", not a corrupted rom but the lack of proper cleanup before and after the flash. But I cleaned up everything before and after and I don't like reconfiguring the whole phone again for nothing.
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
kweso said:
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
Click to expand...
Click to collapse
I assume since your posting in xda developers that you are rooted?
If so, just back up data with titanium backup app and factory reset, setup system and then restore USER apps and data only.
Sent from my GT-I9300 using xda premium
kweso said:
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
Click to expand...
Click to collapse
Did you install another rom?
My vibration for example didn't work with some cm10.1 nightlies
it started in cm10.1 20130203. then i tried wipe cache and dalvik. nothing. then i updated to 0206 (wiped cache and dalvik again) > still nothing. went to bed. got up. everything ok! its vibration again! i am 100% sure, it did not work, when i left it on my desk last night. this morning, i checked for missed calls and it took a moment until i realized: i got haptik feedback back on patternunlock and keystrokes! checked ringtone-vibration: fine as well!
dont ask me how! would still like to know for myself.
thx,
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
call me stupid!
suddenly this evening my phone stopped vibrating again. then i realized: quiet hours! i turned off haptik feedback at night.
could slap myself. at least ill find this thread again, next time i screw it again....
nite,
kws...
...tapatalking
Girls can use it again then. Good news for them!
Sent from the little guy
so i got S3 a week ago . i had many friends having it i even helped them to update it many times .it came preloaded with 4.0.4 ... but i directly updated it to 4.1.2 using odin ...and now runing on XXEMB1
done factory reset ...and rooted it ...after a while of use i noticed that the network data connection and the wifi get disconnected every time phone went to sleep .
...so naturally ...i tried another factory reset ..but no joy so i did another flash using odin without rooting this time
and yet wifi problem remained ..but could stay connected to data after couple of days went back to losing both if it goes to sleep
i have tried the *#0011# fix but nothing changed
in wifi settings ,,,it is set to always stay on during stay ....
i would appreciate if some one can point me to the right direction ...since replacing the handset is no option :/
is it a faulty handset ...cuz i used the same firmware over my fiancee's phone and it is fine ...same for some of my friends ...so i think it is about this phone in particular ....any help plz !
i guess this is mark it as either : stupid question , something new ,, or just with no fix :/
Dunno if this helps, but try juice defender, it has a lot of options to configure, and as i remember, it has one to keep conectivity on while sleep
kofe said:
Dunno if this helps, but try juice defender, it has a lot of options to configure, and as i remember, it has one to keep conectivity on while sleep
Click to expand...
Click to collapse
tried it ...but nothing ..still the same ..data and wifi keeps disconnecting when the phone sleeps ..:/
infernal88 said:
i guess this is mark it as either : stupid question , something new ,, or just with no fix :/
Click to expand...
Click to collapse
Hi Infernal88,
by replying the post in such a manner doesn't make you not stupid.
Hi All,
I am also encountering same issues as TS. Is this a rom issue? or hardware issue?
Thanks
Reaching to the XDA family to help me troubleshoot strange issues with my 10.1 WiFi Tab. Starting a couple of months back the tablet hold not come on once i was pressing the power button and I had to hard reboot to getting back on.
I assumed that it's the power management and I turned it off, but the problem persisted. The I could see that it started to hang at the Samsung animation screen with the sound blocking like a bad CD.
I've run a hard reset cleared cache but the problem still present. It's running stock 4.0.4, was never rooted or custom ROM on it since new.
I don't really know what to do next and I'm looking for pointers.
Thanks for any help.
yulasinio said:
Reaching to the XDA family to help me troubleshoot strange issues with my 10.1 WiFi Tab. Starting a couple of months back the tablet hold not come on once i was pressing the power button and I had to hard reboot to getting back on.
I assumed that it's the power management and I turned it off, but the problem persisted. The I could see that it started to hang at the Samsung animation screen with the sound blocking like a bad CD.
I've run a hard reset cleared cache but the problem still present. It's running stock 4.0.4, was never rooted or custom ROM on it since new.
I don't really know what to do next and I'm looking for pointers.
Thanks for any help.
Click to expand...
Click to collapse
If u have cleared ur sdcard ( wiped it clean ) and are still having these issues...it could be power button related...
I would look and make sure the power button is not sticking...then after that. Make sure you don't have anything corrupted on you're sdcard.
If none of this works....I would root and flash a newer tw based ROM..
Let me know if u need help..
Thanks for your response Gil81. When I performed the factory reset or wiped the scard clean. The button it's not sticky and it function properly.
I'm thinking it might be battery related but not sure.
Any good rom's that you recommend?
Sent from my Nexus 4 using Tapatalk