[Downgrade] CM 12 to Stock[Urgent Help Needed] - Galaxy Grand 2 General

Can I downgrade from CM 12 to the Kitkat stock rom?
Will the phone be bricked?
Can anyone help me with How to Downgrade Instructions?
Thanks in Advance, Please Help me as soon as possible.

yes you can
just flash latest stock rom via odin
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
you can
just flash latest stock rom via odin

Bro, can you tell me step by step..
Please I need help, thanks.
I mean clear data, wipe cache and etc etc...
Also, will this brick the phone?
I am very afraid...
Also can you provide me where i can get latest ROM?

U can find the latest firmware at Sam mobiles select your region and download.
U should also need Odin to flash the stock firmware.
After downloading the ROM put your phone in download mode and flash the ROM.
After or before flashing, factory reset all your data so that the kitkat ROM can boot.

Related

[Q] stsafta vitr.

ok guys... im an idiot...
i was rooting my friends Sg2 (which was running stock gingerbread and bought in Aus.) and using odin and i flashed a CF root kernel XW CLK KF3 but after it booted back into the stock rom i forgot to use Superoneclick to root it....
I skipped straight to the next step which was to use CWM to flash the latest nightly build of Cyanogen Mod.... obviously that didn't quite go as planned..
now, i can still boot into CWM and download mode but im not sure what to flash so i can boot the phone and run Superoneclick and finish loading on a new OS...
also, i have no way to put files on the phone so i assume ill have to use ODIN...
PLEASE HELP!
if you have flashed CF-root kernel, then forget superoneclick you have alreay rooted..
you can flash a stock ICS ROM, since your next target is CM9
---------- Post added at 03:10 PM ---------- Previous post was at 02:58 PM ----------
ICS Roms for ODIN flash : http://forum.xda-developers.com/showthread.php?t=1544487

[Q] How can I restore stock rom and recovery for Cubot One?

Hello, I flash my Cubot with CWM recovery and then installed MIUI 3.12.13 (JB 4.2.1) from this thread http://forum.xda-developers.com/showthread.php?t=2412068.
Now what I need is to restore the stock rom with the most smooth room that I had read is V0.4.
I don't know if I can install stock rom from CWM recovery or I need to get the stock recovery. I don't really know the steps to do that so I would appreciate a lot if someone can guide me or post a Tutorial.
Thanks
u can flash the stock rom( i guess sptool will work)
deathviper said:
u can flash the stock rom( i guess sptool will work)
Click to expand...
Click to collapse
Ok, thank you, but I really don't know how to use SP tool. There is some Tutorial or something that can help me please?
first u have download your stock rom & sptool(latest )
there are many videos on youtube (search for how to use sptool)
u will get many
mxg24 said:
Hello, I flash my Cubot with CWM recovery and then installed MIUI 3.12.13 (JB 4.2.1) from this thread http://forum.xda-developers.com/showthread.php?t=2412068.
Now what I need is to restore the stock rom with the most smooth room that I had read is V0.4.
I don't know if I can install stock rom from CWM recovery or I need to get the stock recovery. I don't really know the steps to do that so I would appreciate a lot if someone can guide me or post a Tutorial.
Thanks
Click to expand...
Click to collapse
Any luck with that? I'm trying to restore back to stock a couple of days now and i've done nothing.
Did you solve this with sptools? If there is a way to undo all this thing please share.
Thank you!
---------- Post added at 01:48 AM ---------- Previous post was at 01:31 AM ----------
deathviper said:
u can flash the stock rom( i guess sptool will work)
Click to expand...
Click to collapse
Didn't work for me... it doesn't even read the device without the battery (especialy without drivers).
Any other suggestions?

[Q] help! problem with rooting a 4.3 device, supersu binary system files not exsist

hi!
yesterday i tried to root my internetional i9300 device with android 4.3 on it. after i root it, i noticed that the guide ment to be for android 4.1.2, so now when im trying to open supersu it says that there is no binary system files and shuts down. i have looked for this problem on the internet with no success. the only thing i know is that it because i have adroid 4.3.
please help...))) :::
do a factory reset from recovery panel ,in case flash stock firmware via odin
---------- Post added at 01:17 PM ---------- Previous post was at 01:15 PM ----------
and follow this guide http://forum.xda-developers.com/galaxy-s3/general/howto-rooting-wiping-flashing-ultimate-t1911726
i just succeed in getting into the custom cwm
alecore said:
do a factory reset from recovery panel ,in case flash stock firmware via odin
---------- Post added at 01:17 PM ---------- Previous post was at 01:15 PM ----------
and follow this guide http://forum.xda-developers.com/galaxy-s3/general/howto-rooting-wiping-flashing-ultimate-t1911726
Click to expand...
Click to collapse
can i just put a new rom?
dok1230 said:
can i just put a new rom?
Click to expand...
Click to collapse
If you are intending to flash a new custom rom staight away their is no need to root your phone because custom roms come already rooted.Also if you install PhilZ recovery it as a option to fix root in settings just select the option reboot then download supersu from play store done.

HELP: Soft (hopefully brick) after trying to install the latest OS.

I would really appreciate assistance.
I followed the steps in http://forum.xda-developers.com/xper...8-pre-t3205929 and my phone will not start.
I don't currently have the ability to try flashing an FTF but I will be attempting to do so once I get home from work - I will try flashing https://www.androidfilehost.com/?fid=24052804347818113.
Prior to having this issue, I had a fully rooted 5.0.2 that was fully functional.
Will I need to first install Kitkat to root my phone or will I be able to flash the FTF and keep the existing root? I could follow http://forum.xda-developers.com/xper...5-0-2-t3094094 instead?
If someone could give me a quick guide as to what I need to do at this point to have fully functional root again, I would really appreciate it.
Unlocked or locked bootloader?
Locked.
I just had exactly the same problem with the same rom - really a waste of time. Ended up downloading through Xperifirm and building both 4.4.4 and 5.1.1 roms myself. Wasted a lots of time restoring lost data also.
You have to go back to Kit Kat, install dual recovery then flash the latest prerooted Lollipop. Just use the more tested roms for C6833 if you can't build one yourself.
---------- Post added at 01:10 PM ---------- Previous post was at 01:05 PM ----------
You can also just flash the stock ftf without having to wipe all the data, in order to back up or recover everything you want.
tnthd2 said:
I just had exactly the same problem with the same rom - really a waste of time. Ended up downloading through Xperifirm and building both 4.4.4 and 5.1.1 roms myself. Wasted a lots of time restoring lost data also.
You have to go back to Kit Kat, install dual recovery then flash the latest prerooted Lollipop. Just use the more tested roms for C6833 if you can't build one yourself.
---------- Post added at 01:10 PM ---------- Previous post was at 01:05 PM ----------
You can also just flash the stock ftf without having to wipe all the data, in order to back up or recover everything you want.
Click to expand...
Click to collapse
Can you show the step of solving this problem.
There's already thread with detailed guide for rooting 5.0.2 (in the OP also):forum.xda-developers.com/xperia-z-ultra/general/guide-root-z-ultra-stock-lollipop-5-0-2-t3094094.
There's also a better instruction here: techbeasts.com/2015/04/18/root-xperia-z-ultra-c6802-c6833-c6806-14-5-a-0-242-5-0-2-lollipop-firmware/
For rooting 4.4.4, just install the NUT's dualrecovery which will root it, no need for a separate step. For 5.1.1, if you want to build the flashable zip, get the ftf from the androidhost link above, or use Xperifirm.
So here are the steps:
.Download the 4.4.4 ftf (for C6833 will work) and flash it using flashtool.
.Install dualrecovery using the install.bat.
.Get a tested prerooted zip for 5.1.1 and flash in TWRP.
.Or download stock 5.1.1 ftf to build a prerooted flashable zip with PRFCreator then flash in TWRP.
Good luck.
tnthd2 is correct, you have to follow the instructions exactly.
it took me two goes flashing the 5.1.1. prerooted .zip and then the FTF, the first time I got a boot loop.

problem with insalling an mt6582 rom

hi guys;
i have a dead mt6582 phone (Condor C5) i tried to install the rom i downloaded from the officiel website using SP Tools
all went great but the phone still in a boot loop .
i dont have access to download mode so i tried flashing a costume recovery (CWM) & installed a several costume roms (zip) but none of them worked & the phone still in boot loop
any help is appreciated .
Have you ported this roms or they are already for your phone ?
hossam55 said:
Have you ported this roms or they are already for your phone ?
Click to expand...
Click to collapse
the rom i used with SP Tool is for my phone & i think the others too but how do i port them if they are not?
http://forum.xda-developers.com/showthread.php?t=2701283
---------- Post added at 07:06 PM ---------- Previous post was at 07:04 PM ----------
Why don't you reflash your stock rom ?
hossam55 said:
http://forum.xda-developers.com/showthread.php?t=2701283
---------- Post added at 07:06 PM ---------- Previous post was at 07:04 PM ----------
Why don't you reflash your stock rom ?
Click to expand...
Click to collapse
if u mean wipe data & factory reset i already tried that & didnt work
No i mean downloading the main rom which ur device come with it is called stock rom and flash it may be using sp flash tool i never used it before u may google
Ur device's name stock rom and downlad it
hossam55 said:
No i mean downloading the main rom which ur device come with it is called stock rom and flash it may be using sp flash tool i never used it before u may google
Ur device's name stock rom and downlad it
Click to expand...
Click to collapse
i did that in the first time ; flashed it with a stock rom downloaded from the officiel website of the phone using SP Tools & all went great but the phone still in boot loop
is there any other way??
That is all i know
Try porting but *NO* guarantee will work :/
HERE : http://www.mtkroms.com/p/custom-roms-for-mtk6582.html
Try whatever you want but If your boot.img is bootloop cause you need to search for it ...
Try www.needrom.com for Stock ROMs...
Hope I helped?
arshad145 said:
Try porting but *NO* guarantee will work :/
HERE : http://www.mtkroms.com/p/custom-roms-for-mtk6582.html
Try whatever you want but If your boot.img is bootloop cause you need to search for it ...
Try www.needrom.com for Stock ROMs...
Hope I helped?
Click to expand...
Click to collapse
i tried all the rom's from mtkroms.com i ported them but still didnt work
i tried flashing boot.img only from stock & costume rom's & again no success :crying:
is it possible that the problem is from the hardware not software?
Can't be hardware issue if you succeeded to flash via spft
---------- Post added at 21:53 ---------- Previous post was at 21:53 ----------
I guess I can't help anymore Sorry ...
thnx for all the replies but i still cant fix the problem
is there anyone who knows another way plz help

Categories

Resources