Hello,
I got the Z3tc SPG611 on lollipop firwmare .200
No matter what I tried I keep on getting bootloop
I have followed instructions: developer option, unknown source, install driver for flashtool successfully on win10...
I flashed the old firmware without any exception, and then the D6603 exploit system only.
When I try to restart the tablet it keeps on bootlooping at the blue animation thing.
the only thing i am not confident about is the MTP mode, i can't find the option to turn it off (not in storage like on nexus devices).
any help would be appreciated. thanks
not many people using xperia devices eh? i shoulda got the TAB S2
Related
Hi there I think I have softbricked my Nabi 2. I tried to update the software from ICS to JB using files from the XDA Nabi 2 Wiki but have come to a massive problem. I can't boot back into TWRP because all I get is an Android laying down with an ! on his chest. I can't re-install TWRP because my Windows 8 PC can no longer see the device!! I can get into the tablet options menu with fastboot, forced recover etc. I think the biggest problem is getting the PC to see the device.
If I try selecting different options in the tablet boot menu then Windows will see the device as Android ADB Device or MTP USB Device.
Can anyone help me get over this problem? I'm not used to using shell commands but fear I will have to install the Android environment to use ADB to get things working.
Please help if you can as this tablet belongs to a nephew of mine and he is missing his YouTube. I am close to tears trying to find the solution. I have read and re-read XDA posts in case I missed something.
Many Thanks In Advance.
Doozeman
Hello.
I'm new in android. I have sony xperia tipo. There was android 4.0 installed, and i have founded 5.0 rom to install on it. I've rooted my phone, then installed cwm, and switched to recovery mode, where i've deleted system, without installing new one from sd card (I thought i can do it later). Now i have a problem that i cannot do anything like switch to recovery mode, when turning on device. There's only 'SONY' title and nothing else is happening. How can I install android os on my device?? Can I do it from pc???
You will have to flash the stock firmware from the pc. Also don't use CWM it is outdated and has not been updated in years
Thank You, I will try it
I am also having the same problem with my dual tipo plz help
adrn.kaczmarek said:
Hello.
I'm new in android. I have sony xperia tipo. There was android 4.0 installed, and i have founded 5.0 rom to install on it. I've rooted my phone, then installed cwm, and switched to recovery mode, where i've deleted system, without installing new one from sd card (I thought i can do it later). Now i have a problem that i cannot do anything like switch to recovery mode, when turning on device. There's only 'SONY' title and nothing else is happening. How can I install android os on my device?? Can I do it from pc???
Click to expand...
Click to collapse
Use Fast boot and Fast boot your stock rom, hope it works
Sir I am a boy studying at class 7th can you help me with the same problem
Actually, I have a problem. My computer doesn't recognize my device. I am trying fastboot devices command or other, but there's only 'waiting for device'. What can I do???
I'll try to get as straight tot he point as possible.
Been using my Mobile one touch pix 7 for a little over a year and always installed Ota updates. Well I rooted the tablet not too long ago, forgot which method I used, but was working fine.
an Ota update came through and totally forgot it was rooted, and tried to install it, at which point the whole tablet got bricked.
It ended up in recovery, and I selected due to failure, to format and wipe the data.
Anyhow, The unit will stay at the boot screen for a while then show command error and then show the recovery screen, my only options are:
reboot
update from sd card
update via adb
update via memory
reboot Bootloader
power off
Well I've tried updating by downloading system images via adb, they return a verification error.
I've tried using adb side load to try to install an Ota update file I found for it, returns a verification error.
I cannot get into download mode, fast boot mode I think does not work as windows reports 3 android devices, but the mobile update software cannot see anything, and fast boot gets stuck at waiting for devices.
I suspect the tablet is for lack of a better description totally bricked and just a paperweight.
I am at a loss of what to try from this point. I'm sure wiping the data after the failed update killed it completely but not sure.
Anyone have any guidance here? I've downloaded a few images from the web I found that say they are for this tablet model, but still getting verification error.
Is there any flashing software I can get that may be able to access the tablet or can I copy a file to the scared and have it try to run an update from there. I don't care if it is rooted or not, just want to get it usable again.
I can run Mac OS, windows 10, windows 7, windows xp, or even have no issue getting a linux version going, whatever will work best for this I can use it. windows 10 I was able to manually add the drivers but windows 7 is not letting me do it the same way. I can connect via adb sideload only, no other adb functions seem to work.
I'm not a total news when it comes to custom rooms, as I have done it with another tablet, and an android car radio, but those were pretty straight forward and bootable so never ran into a brick issue yet.
I have a feeling this is toast and I hope that is not the case.
If anyone here can help out, I would appreciate it.
Thanks again....
Need help here to. Been searching with no luck. Any my issue is.
Rooted kingroot, flashed twrp with flashify and now I'm stuck on twrp. Been searching for any custom stock rom. I forgot to unlock the bootloader but I did enable usb debugging (i didn't see any oem options).
Any k 28532Jonsunf of help would be greatly appreciated.
This sorta happen to me. I rooted pixi 7 with kingroot, and was able to delete a lot of bloatware. However, when I was using lucky patcher it pretty much messed up the play store. But it was fine. I could download stuff through the Internet. But sooner or later I needed to fix it. Tryed a lot of ways but it didn't help. So I factory reset the tabletand now im stuck at the Setup Wizard. It just won't let me let me through. I thought its was over, but then I get a message saying there is an update available. So I download it and installed it. But all I get at the end is error. So now I need to flash it with stock. I tried the img. too, but it doesnt show up in the recover menu. If you found a solution please tell me
Can anyoonneee help me find a good Custom Rom for the alcatel one touch pixi 7 (9006W)? Sucks that there's not much info for this device (probably cause the device sucks lol) I'm running on lollipop 5.0.2 and am not able to get OTA update due to rooting. Unrooting didn't help. It seems only answer is custom rom but don't want to risk bricking it as I don't have a computer at home. Also, I am new to this so if anyone can share some insight, I'd be eternally grateful
P.s
It's a t mobile device but I only use it on wifi.
Am using kingroot.
Have never installed a custom rom
****ing device is 8 gigs. 1 gig Ram.
Is it possible to get Nougat?
Help meeee lol
Hi everyone,
I have a R800at at&t Xperia play phone that is on Gingerbread 2.3.3 stock, and I can't seem to get it rooted, and on icecream or jellybean. I thought I have to get rooted, install clockwork mod, and then another step to upgrade, but I keep getting errors.
I tried to do it on windows 10, and the device wouldnt even connect, so I went to my laptop with win 7, and this is what I did:
- downloaded a firmware, superclick, and flashtool.
- set my mounting to mass media, allowed unknown and usb degubbing,
- installed drivers, and tried to flash with flash tool.
I got so many errors, and the phone is basically looping on the "rethink possible" screen.
Can anyone help me out exactly what I need to do to go from gingerbread to icecream or jellybean? I might have done the exact steps wrong. Thanks in advance.
Hello my dear fellow community of XDA
I’m asking you for help, I found myself in a tough situation because I damaged system in tablet Nexus 9. Bootloader was already unlocked in my device when I bought it. I assume that the system was original. I didn’t notice any modifications. I damaged this system by uploading a file in a fastboot mode connected by ADB. This file is for rooting. I used this guide on the YouTube:
After doing everything step by step in this guide and switching my device on there was a sign of launching - vibration. The next thing I saw was white Google logo and after that the animation of loading appeared. It was loading without any success.
Before uploading the root file I also tried to upload TWRP file via ADB but it didn’t make any difference. After uploading TWRP files system launched properly, there is no new app in the app list and no combination of buttons such as power + volume that launches TWRP. Please tell me if I’m doing something wrong…
I tried to fix this bootloop by cleaning files via Hboot - factory reset but it didn’t change anything. I was searching for guides that would help me solve my problem but I couldn’t find anything useful. Each of them was old. They were from 2014 or 2015.
I would like to have a working tablet with TWRP, root and other unofficial system (you can give me some suggestions, I was thinking about Android 9). I don’t know where to start or what should I do first. Fix bootloop or upload TWRP ? What is correct order ? How to upload TWRP eligibly ? I rooted devices only several times so please excuse me, I am not a professional. I know that guide on YouTube mentioned before was for Android „L” not „N”.
Summary:
> Tablet Nexus 9 OP82100 WiFi version 32GB
> I use PC with Windows 10
> After connecting the tablet to the PC via USB cable in fastboot mode the tablet is visible in ADB console on the list of devices.
I hope that each information I gave you is clear enough. This is my first post on this forum. I hope somebody will find some minutes for reading this post. I’m counting on you. Thank you in advance for any help.
Ok, I honestly didn't read everything, but if you have and can access fastboot, flash TWRP, transfer a ROM to the internal memory, wipe data (not storage) and flash your ROM.
Try getting Wug's Nexus Root Toolkit, it's a graphical UI for adb and fastboot, might be a little friendlier for you.