As title. My phone is stuck in the emergency recovery page: use the emergency recovery function in the smart switch PC software. I cannot turn the phone off, I cannot go into recovery, and I cannot go into download mode.
I attempted to root the device using kingo but it failed. It was my first time rooting a device. So my phone essentially got stuck when it restarted at the "Samsung S6 Edge: Powered by Android" black screen. I then managed to "recover" the device by using Odin and flashing a stock firmware.
So I got back into the device and tried to change the settings back to what they were before. I disabled USB debugging (Bootloader option is not available for my mode, SM-G925I).
Then...having the itchy hands I do, I checked out the security portion under settings, and I saw that there was "unauthorized changes made". The program suggested that I restart my phone so as to get rid of those changes..which I did. And since then, it has been stuck again.
I actually took a trip down to the service centre where the tech actually managed to turn the device off, and I was told that warranty was void. In any case, when I returned home I tried to flash the same stock firmware that I used earlier but ODIN failed. I redownloaded the stock firmware for 925I from a couple of places and they're all 1.5gb+; but every time I try to even load the firmware Odin just hangs and I have to end the task...
Right now, I'm attempting to use smart switch and the emergency recovery function but it has not worked the first time, at the second stage where installation actually takes place. While the phone was connected, window's kept giving the notification that the device was not recognized. I'm giving smart switch a second desperate try and this time round I'm receiving no notifications from windows (so I suppose that's a good thing..). But assuming that smartswitch does not work? What are my options considering:
1) Failed root using kingo root (one-click stuff..wish I had known better)
2) USB Debugging is not enabled
3) Unable to enter recovery mode
4) Unable to enter download mode (but a download bar appears when I attempt to use Odin at the emergency recovery page)
5) 5.1.1 android system
6) Phone is not recognized by smart switch (might be because it is in the emergency recovery mode)
Really at a loss here..I'm helpless with tech and I really should have just left well alone. Jailbreaking was so much easier...Samsung quoted me $200+ for the replacement of the motherboard of the phone, which I will probably take up if the situation is really beyond repair.
Thanks in advance..
johnlim2345 said:
As title. My phone is stuck in the emergency recovery page: use the emergency recovery function in the smart switch PC software. I cannot turn the phone off, I cannot go into recovery, and I cannot go into download mode.
Really at a loss here..I'm helpless with tech and I really should have just left well alone. Jailbreaking was so much easier...Samsung quoted me $200+ for the replacement of the motherboard of the phone, which I will probably take up if the situation is really beyond repair.
Thanks in advance..
Click to expand...
Click to collapse
Can you still charge it?
Use the original root file you downloaded to re flash the drive. Hope that helps it did for me.
Dakhandokar said:
Use the original root file you downloaded to re flash the drive. Hope that helps it did for me.
Click to expand...
Click to collapse
bit late
Related
Okay, so I had installed the latest MIUI rom, after rooting my phone, but then got stuck in a boot loop so I decided to flash back to stock rom, during this Odin crashed and now my phone is stuck with this icon which I'm sure you guys know about. The problem I have is I had turned off debugging mode on my phone earlier on after I rooted, so now I can't exactly flash it back to stock rom or anything with Odin, the Recovery mode doesn't work anymore, everything just brings up the phone..!..PC symbol. I can however go into download mode. Just not sure what I can do with it with debugging turned off.
What do I do?
theLazyLion said:
Okay, so I had installed the latest MIUI rom, after rooting my phone, but then got stuck in a boot loop so I decided to flash back to stock rom, during this Odin crashed and now my phone is stuck with this icon which I'm sure you guys know about. The problem I have is I had turned off debugging mode on my phone earlier on after I rooted, so now I can't exactly flash it back to stock rom or anything with Odin, the Recovery mode doesn't work anymore, everything just brings up the phone..!..PC symbol. I can however go into download mode. Just not sure what I can do with it with debugging turned off.
What do I do?
Click to expand...
Click to collapse
When you connect the phone to your pc, does odin show that it is connected? i.e. a block turns yellow?
It detects the phone properly, it gives an error though when it reaches the writing stage, and hits a Red Failed icon in the first bar.
I am no expert but wouldn’t a USB jig Help get into download mode?
As I mentioned I can already get into download mode, but I don't know what to do from there, seeing as I had debugging mode off before my phone started this whole mess.
Oh sorry, I misunderstood.
I cannot help you mate, because I am relatively new to all of this, but I am sure that someone will be able to help you out. From what I have read as long as the phone shows signs of life (in your case the "phone ! pc" symbol) it can be recovered.
Keep your hopes up, all the best to you!
The problem I have is I had turned off debugging mode on my phone earlier on after I rooted, so now I can't exactly flash it back to stock rom or anything with Odin,
Nothing to do with flashing .
Your choices are
Remove battery replace boot phone to download mode install stock rom.
Or enter recovery mode and factory reset .
USB jig is supposedly not working for download mode on SGS2 if three button will not enter download mode .
Or remove custom rom and root and zero rom counter return phone under warranty .
Or return under warranty and take your chance .
jje
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
Try a USB JIG to enter DL mode
Do you get an exclamation mark next to a pc?
Sent from the little guy
try this
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
try this method
if u have any mini usb cable cut it and peel of the skin and short the the 4th and 5th pin with 300k resistor or 100k*3 resistor and connect to mobile u will directly goto the download mode remove this pin and connect pc in odin mode and flash first with ics rom and if it is success and then try jelly bean try good luck
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
NikoGR said:
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
Click to expand...
Click to collapse
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
GamingDj said:
Try a USB JIG to enter DL mode
Click to expand...
Click to collapse
Thank you so much!! I wasn't able to get a usb jig but managed to get it online with a quick delivery. It was my first time using a usb jig but it's too simple. I've a working phone with JB in it.
Thanks again!
keithross39 said:
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
Thanks for you answer!Will a JTAG work?If i can find one?The phone is off the warranty.
The way I see it is that at the moment, you own a paperweight.....so best to *try* the cheaper options first....jtagging being the cheapest......
If that doesn't sort it....you have 2 options.....
1) replace the mainboard
2) buy an entirely new phone.....
Basically whichever option you choose from now on will have *some* financial cost........
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
A 3rd option is to buy a 2nd hand phone with maybe a cracked screen,and use the board from that.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
I have a Hong Kong version Galaxy S6 Edge which I have rooted through Pingpong root. Yesterday, after I installed TWRP recovery through Flashify, the phone could not boot up with this message: "Custom binary blocked by c-rom." I then searched on-line and noted that for our version of the Edge, there is a bootloader lock which must be unlocked before any custom rom or recovery could be installed.
There are on-line solutions for "Custom binary blocked by reactivation" which basically requires the phone to be booted into download mode and install through Odin. I have tried this method but the phone did not seem to react to Odin (not sure if this is due to C-rom lock). Also this method requires removal of the battery which is not possible for Edge.
http://forum.xda-developers.com/showthread.php?t=2486564
I brought the phone back to Samsung Service Centre yesterday but they simply refused to help and suggested that I replaced the motherboard for some US$350. I am sure that there is nothing wrong with the hardware and so did not accept their service plan.
I appreciate that this problem only exists in China version of the phones (see link below) which have C-Rom lock but still I I would be grateful if anyone in the forum could offer me some help here. Would be much appreciated.
http://forum.xda-developers.com/and...locker-apk-t3086609/post60948100#post60948100
Have you tried putting the phone in emergency mode and using the smartswitch recovery mode to try to fix the phone?
Thanks for your comment. As the phone cannot bypass the bootloader lock, I cannot switch it to emergency mode.
Odin works differently you have to boot into download mode by being powered off, then press power, home, volume down, then press up.
Do not connect to computer yet, open Odin, load your files, let it do its thing, then connect to computer, you will see added, then hit start.
Good luck.
Welcome ladies and gentleman to my tail of how i ****ed up my phone. I have researched on possible ways to fix my edge but all so far have failed and possibly screwed me so i'm down to asking for any ideas, tips on how to possible "save" my phone. I attempted to root my phone via King-Root (already know a stupid idea). i forgot to turn off Knox security and when it tried to boot frp lock, and Kernel is not SEAndroid Enforcing. So i went into safe mode (idk whats the correct term for it) cleared all cache and tried to flash new firmware onto the phone, tired 3 attempts and all failed, now its stuck in an error screen reading "An error has occurred while updating the device software. Use the Emergency recover function in the Smart Switch PC Software. I downloaded smart switch just to see if possible it would take it out of the error screen and its not recognized by smart switch. I have heard the use of certain cables effects whether smart switch will recognize the device but i am using the given Samsung micro USB cable. ( I will also ask my dad when hes back if he did anything else to the phone that he didn't tell me about) I just want to know if i have anymore options to UN-brick it, whether it would be a good idea to see if i could get my warranty by destroying the phone or if its a lost cause all together and i should just sell it to at least get some money from it. Thanks for any feedback, it will be greatly appreciated.
Try to flash the correct rom for your device using windows 7...
If it boots in download mode (power button +home button+volume down button) then it should be salvageable. Boot in download menu and from there just flash a stock rom from http://www.sammobile.com/firmwares/ via odin.
I ran into a serious problem and now I do not know how to fix it. It turns out that I wanted to install a rom to my cell phone, since the stock I had was giving problems with the battery indicator, and I tried to calibrate it and even used others also following different steps to calibrate them, but always the same problem; Well, after root I found the problem that I could not install anything from the recovery mode of the cell phone, there was a problem that was disabled and could not from the sd, or internal, or adb or anything. Finally I decided to find an application to install twrp and flash the rom, downloaded flashify and I did.
When I went into recovery to flash the rom the cell phone did not change the logo with the message in a corner that is not the official recovery as always comes out when a custom is installed. And there it stays.
I can not turn it on normally, because each time I turn it on it goes directly to the logo with the message that it is not the original recovery, as if trying to access the recovery.
PS: I can not use odin, it does not recognize the cell phone when it is in odin mode, since all the drivers are installed and the kies, I reinstalled everything 3 times every time I tried it. And I can not enter odin mode, and the home button does not work, I used adb, but since it does not turn on, it does not recognize it either.
alberto1251 said:
I ran into a serious problem and now I do not know how to fix it. It turns out that I wanted to install a rom to my cell phone, since the stock I had was giving problems with the battery indicator, and I tried to calibrate it and even used others also following different steps to calibrate them, but always the same problem; Well, after root I found the problem that I could not install anything from the recovery mode of the cell phone, there was a problem that was disabled and could not from the sd, or internal, or adb or anything. Finally I decided to find an application to install twrp and flash the rom, downloaded flashify and I did.
When I went into recovery to flash the rom the cell phone did not change the logo with the message in a corner that is not the official recovery as always comes out when a custom is installed. And there it stays.
I can not turn it on normally, because each time I turn it on it goes directly to the logo with the message that it is not the original recovery, as if trying to access the recovery.
PS: I can not use odin, it does not recognize the cell phone when it is in odin mode, since all the drivers are installed and the kies, I reinstalled everything 3 times every time I tried it. And I can not enter odin mode, and the home button does not work, I used adb, but since it does not turn on, it does not recognize it either.
Click to expand...
Click to collapse
To enter in to the download mode you can use JIG USB which looks like this :
https://images-na.ssl-images-amazon.com/images/I/41MhETGCbBL.jpg
You can buy that jig USB on E-Bay
or you can use this tool but little Warning !!!
https://app.box.com/s/ktb9rzxde78lujqioh3rbmh6w39gedmm
File was scanned against viruses and it has some , maybe because like that he make your device in download mode.
https://www.virustotal.com/sr/file/...33ff7dceef468c2e8c325d79c7ad43fc8c1/analysis/
Here is video how to use .
https://www.youtube.com/watch?v=2er95HkiJbo
Good Luck
I'll try with the usb jig. Still don't know if buy the resistance and make one or just buy the jig. Then i will see if i can get for odin to detect the phone, using some kind of witchcraft or whatever hahahaha.
Thanks, I will set the thread as solved.
Good Luck