Related
I have tried every radio in this forum, must be at least 7 or 8, and none of them can get my SGNote i717 to work When i go Settings > wireless and networks > mobile networks i get a popup saying "insert SIM card to access network services" eventhough i already have a SIM from wind in there.
I am running OnlyOne rom 4.0.4, rooted.
kernel version:
3.0.8-perf-i717ucle2-cl526350
[email protected] #1
SMP preempt tue may 8 21:16:00 KST 2012
build number:
IMM76D.UCLE2
If anyone can point me to or post a working, or prefered, faster radio to use for Wind Mobile, I would really appreciate it. I've spent countless hours on XDA.
I have copied the radios to the SD card and tried flashing each one with CWM, then trying them out, but none work. If I am doing it wrong, please show me how to do it right.
Cheers :good:
Wind uses T-Mobile bands. Go get the blaze modem in the T-Mobile thread discussion.
But if you get a sim card not recognized or a no sim card inserted error, its not the modem. Check your sim in any GSM phone to see it it is damaged or not provisioned.
rangercaptain said:
Wind uses T-Mobile bands. Go get the blaze modem in the T-Mobile thread discussion.
But if you get a sim card not recognized or a no sim card inserted error, its not the modem. Check your sim in any GSM phone to see it it is damaged or not provisioned.
Click to expand...
Click to collapse
or even dirty. possible that your sim slot is damaged too.
madman604 said:
or even dirty. possible that your sim slot is damaged too.
Click to expand...
Click to collapse
Well, its a brand new phone, perfectly clean and i had it working before. at first when updated to onlyone rom, i tried many that didnt work until i found one that did. but i found the speeds were too slow, so today i decided to shop around for some others, but now that i flashed these ones, i cant get the original one working again.
are you sure its hardware and not software?
found this:
http://forum.xda-developers.com/showpost.php?p=26657065&postcount=336
quite a unique circumstance but explains a lot. i will try it now and confirm it worked on my phone
yes, the above link proved to be the correct answer. onlyone rom users for the galaxy note can only use the ripped sgs2 ICS radios
i hope this will be able to help someone else
:good:
Whew. Good job on the investigation.
same as me
hello
this happened to me and drove me crazy in the end from recovery i did all the wipe and installed the saurom rom then every thing worked agen i am new at this but i think my mastic was that i flashed ics modem over a gingerbread rom or vers versa
but after a wipe and a new rom the phone start to see the sim i wish that help because this drove me crazy good luck
Can someone post the steps to do this? I am with Mobilicity and lost network connection. Probably because of flashing roms that do not work with Mobilicity.
sazfar13 said:
Can someone post the steps to do this? I am with Mobilicity and lost network connection. Probably because of flashing roms that do not work with Mobilicity.
Click to expand...
Click to collapse
The solution to this problem is all those on the Tmobile/Wind/Mobilicity network need to flash one of these radios after they have flashed a rom of their choosing. I believe the radios that come with these roms are for the AT&T/Bell/Rogers/Telus networks
http://forum.xda-developers.com/showthread.php?t=1573568
rangercaptain said:
Wind uses T-Mobile bands. Go get the blaze modem in the T-Mobile thread discussion.
But if you get a sim card not recognized or a no sim card inserted error, its not the modem. Check your sim in any GSM phone to see it it is damaged or not provisioned.
Click to expand...
Click to collapse
No, it actually "does" have to do with the modem sometimes. I flashed several roms and, when i got the error, it was only with a certain rom and, after going back to the other rom, the problem was gone. The SIM wasn't touched hence...it was not the SIM.
immortalsoule said:
No, it actually "does" have to do with the modem sometimes. I flashed several roms and, when i got the error, it was only with a certain rom and, after going back to the other rom, the problem was gone. The SIM wasn't touched hence...it was not the SIM.
Click to expand...
Click to collapse
Flashing a rom does not flash a modem. So with all the rom changes you did, you never touched the modem.
Only a few update packages contain both a rom and a modem.
rangercaptain said:
Flashing a rom does not flash a modem. So with all the rom changes you did, you never touched the modem.
Only a few update packages contain both a rom and a modem.
Click to expand...
Click to collapse
Yes and my packages "may" have been some of those packages. Stop assuming....believe it or not you don't see everything that goes on at the other end. I also flashed other modems as well, the three made for T-Mobile, along with those roms and just didn't add it into the conversation. The Padawan ROM actually "does" carry multiple modems.
What ever, dude. Stop getting so excited. Its just information.
And its not your thread -- its a community thread.
Hello. It has probably been asked many times, but I failed to find a solution on any of the topics, so I ask again.
After flashing some ROMs, I found out that even though my Sim card is recognised, my phone fails to connect to the netowrk, it instead shows EMERGENCY CALLS ONLY.
My IMEI number is OK, the rom that I am using is stock T-Mobile Poland one I9300XXUGML2, with the modem version I9300BOUGMK3.
Any help? If you could answer fast, that would be great as I am leaving to Italy tommorow, and I need the phone working by this time
Use modem patch ?
marciopol said:
Hello. It has probably been asked many times, but I failed to find a solution on any of the topics, so I ask again.
After flashing some ROMs, I found out that even though my Sim card is recognised, my phone fails to connect to the netowrk, it instead shows EMERGENCY CALLS ONLY.
My IMEI number is OK, the rom that I am using is stock T-Mobile Poland one I9300XXUGML2, with the modem version I9300BOUGMK3.
Any help? If you could answer fast, that would be great as I am leaving to Italy tommorow, and I need the phone working by this time
Click to expand...
Click to collapse
Use patched kernel and patched modem to bring your network back.
I suggest you to go to development section and download Boeffla kernel 5.3 (it is patched and it reads patched modems), and for modem, download this 《 https://mega.co.nz/#!48UHCaZD!3c2sSuzqhNWJvy2D1IqGIif-ISrgANsUA2aPptLdm_U 》, first flash kernel then modem, all via CWM.
Oh yeah to mention, you got in the position of patched world, it means everytime you flash a new rom you have to use patched kernel and modem.
In the future, please use search, because this really is answered multiple times with all the precise instructions and steps in thread [SOLVED] S/N 0000...
Cheers.
I have a problem with a Samsung Galaxy S3 (GT-I9300) which belongs to a friend.
He wanted Lollipop on the device so I flashed an Unofficial CM12 from here - http://forum.xda-developers.com/galaxy-s3/development/wip-cyanogenmod-12-t2936990
However he seemed to be experiencing some bugs with the ROM so he wanted to revert to stock ROM until more stable builds arrived.
I flashed the stock ROM 4.3 obtained from SamMobile but on this the SIM wasn't working. Same results were obtained by official 4.0 and 4.1.
I finally decided on the official CM11, grabbed the latest stable build and tried flashing it. But now the ClockworkMod recovery returned 'Status 7'. Repeating the process with device id verification removed gave 'Status 6'.
To get the device in working condition I had flashed Korean Service ROM by Samsung. This is working with the SIM card with a few bugs.
One other curious observation was while copying the CM11 to the internal memory. The copy window was dismissed before the green copy bar reached the end. I had to flash it with an external SD Card which seemed to have normal copy process.
This entire process has been repeated on a different PC with all fresh downloaded ROMs but gave the same results as before with the only exception of SIM recognition but no signal on CM12.
Any help would be appreciated to get the device working normally.
Hi,
but "SIM wasn't working" means that your phone is like a phone without SIM?
I had the same problem in the past with my old i9100 and in that case the problem was the non correct baseband (radio) and RIL (Radio Interface Layer).
If this is your case, you can try to flash the correct modem (it depends from your model and firmware version) from recovery or using Odin. First backup EMS folder (IMEI folder)...
I had the SIM inserted. And the modem is okay because the official firmware was of my country.
Turbokat said:
I had the SIM inserted. And the modem is okay because the official firmware was of my country.
Click to expand...
Click to collapse
I understood that the SIM is insered but the phone is without signal as you haven't... so probably the problem is modem or corrupt EMS folder...
Now you are running stock firmware or CM?
I have null imei after update. LineageOS 14.1 for i9300 network services are not running. Is there a solution for this release and post? It is possible to make a development like "Zuluman, ariza", can you do this? I want so much. The only solution to this problem. I live in Turkey. I bought a device IMEI changed from abroad. These problems were solved for 4.4 and before, "Zuluman and Ariza". However, nothing was done for the new releases. Help, thank you
You need a patched modem.
Beamed in by telepathy.
I have it for 4.4. But not for later versions. Required for later versions. I want to install 7.1. Required for 7.1.
I recommend you flash a stock rom and see if the problem still exists.
Lineage os is frequently updated and it is very likely that the build you have has issues with wifi.
Beamed in by telepathy.
I tried to install but I get Error: 7 in the TWRP.
Tried with 3.0.2.2 and 3.1.0
Anyone with this problem too?
I have no cellular data on my Galaxy S3 i9300, with Lineage, though it works fine with Archidroid, which I have installed since. Cell Data worked briefly with Lineage, but now not at all. I believe it might have been triggered by turning off wifi, but not sure. Tried a complete wipe of all caches, data, system, etc. plus a reformat of internal before clean installing lineage-14.1-201727-nightly with GAPPS pico. My IMEI is still intact, so that doesn't seem to be the issue, as cited above.
I have the same problem unfortunately. I just wiped my old stock android from my Galaxy S III and installed Lineage OS 14.1. The installation seems to work well, except that my Sim card is not recognised. When I check "Baseband version" in Settings/Phone Status it tells me "Unknown". I assume it has something to do with the modem driver. Does anybody know where to get the right modem driver?
I tried googling for a modem driver and installing it with heimdall. But then my phone didn't start anymore and I had to reinstall Lineage OS...
Reinstall the stock firmware via odin..
shivadow said:
Reinstall the stock firmware via odin..
Click to expand...
Click to collapse
Do you know where I can find such a stock version? Unfortunately I made a mistake with the recovery backup...
Look at sammobile.com or updato.com for the latest stock ROM.
Thank you! Unfortunately this didn't work... I downloaded the firmware (for Cyprus because the phone was bought in Cyprus) and used Odin to install it but now when I try to turn on the phone it just shows the boot screen (saying Samsung Galaxy S 3) and then goes black... I'm not sure what I am doing wrong here. Perhaps I didn't choose the right firmware, do you know how to find out what exact firmware I should download? I got the phone used, so I am not 100% sure it was bought in Cyprus, perhaps UK but it was bought without a network provider.
audit13 said:
Look at sammobile.com or updato.com for the latest stock ROM.
Click to expand...
Click to collapse
audit13 said:
Look at sammobile.com or updato.com for the latest stock ROM.
Click to expand...
Click to collapse
Is there anywhere I can get a clean unlocked stock rom for the U.S. GT-I9300? I lost mine and had to use a T-Mobile rom from elsewhere. Why is this, or a rom from any U.S. carrier nonexistent on the lists? Thanks!
The gt-I9300 was never sold in the USA so there was never a stock USA rom. The T-Mobile s3 was the sgh-t999.
Is the phone shown as the get-I9300 in download mode?
audit13 said:
The gt-I9300 was never sold in the USA so there was never a stock USA rom. The T-Mobile s3 was the sgh-t999.
Is the phone shown as the get-I9300 in download mode?
Click to expand...
Click to collapse
That statement doesn't make sense to me. I live in California, USA and bought it as an unlocked, no carrier, International GT-I9300 from BestBuy. It never had a carrier logo associated with it originally, but since I had to replace the original rom, it now includes a T-Mobile splash after the Samsung S3 splash.
Yes, it states that its a GT-I9300 in Download mode.
The gt-i9300 international was never sold by T-Mobile USA as it doesn't support LTE in the USA:https://www.gsmarena.com/samsung_i9300_galaxy_s_iii-4238.php.
This is the T-Mobile USA s3: https://www.gsmarena.com/samsung_galaxy_s_iii_t999-4804.php
https://forum.xda-developers.com/galaxy-s3-t-mobile
audit13 said:
The gt-i9300 international was never sold by T-Mobile USA as it doesn't support LTE in the USA:https://www.gsmarena.com/samsung_i9300_galaxy_s_iii-4238.php.
This is the T-Mobile USA s3: https://www.gsmarena.com/samsung_galaxy_s_iii_t999-4804.php
https://forum.xda-developers.com/galaxy-s3-t-mobile
Click to expand...
Click to collapse
Thanks, but I'm not looking for a T-Mobile USA stock rom. I'm looking for the GT-I9300 USA International, Unlocked stock rom that originally came with my USA purchased GT-I9300. From what I understand, local service providers have access to it, but Samsung won't post it publicly, like the others. Hoping someone may have a link to a copy they've found or backed-up from their own USA GT-I9300.
I have never heard of or come across a USA international rom for the gt-i9300.
audit13 said:
Look at sammobile.com or updato.com for the latest stock ROM.
Click to expand...
Click to collapse
I brush three times I9300ZCUBML1, or useless.
lineage-14.1-20180124-nightly-i9300-signed.zip
And brush the rom can not use 5Ghz wifi, but when using the signal I9300ZCUBML1 than my nexus6p weaker, simply can not be used in a stable, so no problem.
Where did you get the ML1 ROM? I don't see it on sammobile.com: https://www.sammobile.com/firmwares/galaxy-s-/GT-I9300/. Since the ROM ends in ML1, it could be a 4.1 ROM. Thanks.
Following is worked for me on my Samsung Galaxy S3 i9300 with LineageOS 14.1:
1. Flash original ROM with Odin. (if at this moment IMEI is not correct use program "Samsung Tool" to manually edit IMEI)
2. In security setting, set SIM card lock to none. (After this you should permanently disable SIM pin request on startup on every new ROM)
3. Flash custom TWRP recovery with Odin.
4. Root phone.
5. Make nandroid backup of EFS using TWRP.
6. Wipe cache, system, boot, data and flash custom ROM (do not reboot system after flash).
7. After flashing custom ROM, restore EFS using TWRP.
8. Flash Opengapps, wipe cache, dalvik cache and reboot system.
9. Set everything up Google account...etc.
10. In options check if IMEI is valid. (If is not, reboot to recovery and try again to restore EFS)
If you don't have working cellular network after flashing custom ROM, read following:
From Play Store install app "Cell Network Reset".
Open app and run "Reset Cell Network". (This step is weird because some times after few minutes i get working network, some times after few seconds. Also some times i need to run "Reset Cell Network" few times in a row to get the network working)
I hope it will work for you
I recently purchased a HTC one M9 that had CellCom service but it worked with my Verizon nano sim card. I have s-off and am supercid i flashed verizon htc one m9 mm firmware had to be supercid before it let me do that. It booted fine but i noticed it wouldn't read my sim card so i installed twrp and RR N custom rom hoping it would fix it but it didn't. I now have unknown IMEI, Unknown IMEISV, unknown baseband, unknown Bluetooth address. Anyone know of a way to fix this where all my stuff will show again and it will read my sim card again? Everything else works on it wifi, camera, audio, ect. Please any help will be needed. I tried flashing the stock firmware that came with the phone from CellCom but after it flashes it gets a bootloop. That is through the sd card method in download mode of the 0PJAIMG.zip file.
jam0688 said:
I recently purchased a HTC one M9 that had CellCom service but it worked with my Verizon nano sim card. I have s-off and am supercid i flashed verizon htc one m9 mm firmware had to be supercid before it let me do that. It booted fine but i noticed it wouldn't read my sim card so i installed twrp and RR N custom rom hoping it would fix it but it didn't. I now have unknown IMEI, Unknown IMEISV, unknown baseband, unknown Bluetooth address. Anyone know of a way to fix this where all my stuff will show again and it will read my sim card again? Everything else works on it wifi, camera, audio, ect. Please any help will be needed. I tried flashing the stock firmware that came with the phone from CellCom but after it flashes it gets a bootloop. That is through the sd card method in download mode of the 0PJAIMG.zip file.
Click to expand...
Click to collapse
I am not sure but try to flash stock rom which includes modem image.
OR
Flash the original firmware. (Which was installed when you received your phone)
Ok thanks. Think it would be better to try to flash in fastboot instead of using the sd card method?
jam0688 said:
Ok thanks. Think it would be better to try to flash in fastboot instead of using the sd card method?
Click to expand...
Click to collapse
Yes. If you know how to flash in fastboot mode then flash it in that way.
Same thing happen to me, its very simple to fix it, just download your phone's modem and flash it via Recovery, And thats all, make sure the modem is for ur device, else its ain't gonna work.......
Sent from my One using Tapatalk