I'm actually embarrassed to open this thread but I'm baffled so looking for some help from LG vets. This is my first LG phone. I see all the adverts showing a vertical clock on the lockscreen, hours over minutes. I have a horizontal clock widget on my lockscreen, hours on the left, minus on the right. I want the vertical clock widget, hours on top of minutes. I looked in widgets, not there. I tried to resize the widget on the homescreen, won't resize to that format. I chatted with LG CS who stated that I should make the lockscreen visable, hold and drag the clock to the left and more options would appear. I hold and drag the lockscreen clock and it goes nowhere. I am on a AT&T LG V10. Is there any way to get the vertical clock on the lockscreen and, if yes, how about the homescreen as well?
Now. I know I'm not crazy. I had the hour over minutes clock and went to look in settings to see where to change it and I noticed that now my clock is hour next to minutes.
Sent from my VS990 using Tapatalk
---------- Post added at 06:04 PM ---------- Previous post was at 05:48 PM ----------
I'm going to venture to guess that it changes depending on if you have notifications. It is hour over minute when you don't have notifications on the lock screen then when you have them it will change to hour next to minutes. I disabled them altogether as I don't need them on the lock screen and the second and the notification center.
Sent from my VS990 using Tapatalk
SprManKalEl said:
Now. I know I'm not crazy. I had the hour over minutes clock and went to look in settings to see where to change it and I noticed that now my clock is hour next to minutes.
Sent from my VS990 using Tapatalk
---------- Post added at 06:04 PM ---------- Previous post was at 05:48 PM ----------
I'm going to venture to guess that it changes depending on if you have notifications. It is hour over minute when you don't have notifications on the lock screen then when you have them it will change to hour next to minutes. I disabled them altogether as I don't need them on the lock screen and the second and the notification center.
Sent from my VS990 using Tapatalk
Click to expand...
Click to collapse
Thanks! I have been using, modding, flashing phones for years and I was at a loss trying to figure it out.
No problem. In fact, I was looking (not very hard)/for how to change that to hour next to minutes and it wasn't until I read your post that I put a little more thought into it.
Sent from my VS990 using Tapatalk
Must be the international version only. I have the horizontal clock regardless of notifications. That's unfortunate as I like the look of the vertical one.
I have the Verizon Wireless version.
Sent from my VS990 using Tapatalk
SprManKalEl said:
I have the Verizon Wireless version.
Sent from my VS990 using Tapatalk
Click to expand...
Click to collapse
so do you still have the vertical hour/min clock on your lockscreen? if so can you upload the "LGalarmclock.apk" apk so we can download it? I'm assuming that's the apk responsible for the lockscreen clock if not someone please correct me.
SprManKalEl said:
I have the Verizon Wireless version.
Sent from my VS990 using Tapatalk
Click to expand...
Click to collapse
Any way you or your any other Verizon user mind doing an adb system pull? It would be helpful for me to know which variants come with "V"ertical and which "H"orizontal. Obviously Tmos=H and Verizon=V..
Don't know how.
Sent from my VS990 using Tapatalk
SprManKalEl said:
Don't know how.
Sent from my VS990 using Tapatalk
Click to expand...
Click to collapse
It's very easy and would help a lot here's a small tutorial I found to explain it.
http://www.droidviews.com/push-pull-files-android-using-adb-commands/
The command needed here is just adb pull /system and that's it. If you end up doing this just zip the files it gives you and upload to the cloud or something and post a link here.. I would really really appreciate it.
If you meant to send a link to didn't get attached.
Sent from my VS990 using Tapatalk
SprManKalEl said:
If you meant to send a link to didn't get attached.
Sent from my VS990 using Tapatalk
Click to expand...
Click to collapse
It's there now..
Swizzle82 said:
It's very easy and would help a lot here's a small tutorial I found to explain it.
http://www.droidviews.com/push-pull-files-android-using-adb-commands/
The command needed here is just adb pull /system and that's it. If you end up doing this just zip the files it gives you and upload to the cloud or something and post a link here.. I would really really appreciate it.
Click to expand...
Click to collapse
Is this something that requires having root to do?
SprManKalEl said:
Is this something that requires having root to do?
Click to expand...
Click to collapse
Not at all.
I'll try to do it soon.
Sent from my VS990 using Tapatalk
Can someone from Verizon please do an adb pull and get me the SystemUI apk? Pleeeease!!??
I realize this is dead but I stumbled across it. You don't need a pull of system. It's all there, you just need to change build.prop to a non-US carrier for ro.build.target_operator and ro.build.target_country. For example, TLS and CA, respectively. I did it for the international data icons, but the clock is affected too.
loganfarrell said:
I realize this is dead but I stumbled across it. You don't need a pull of system. It's all there, you just need to change build.prop to a non-US carrier for ro.build.target_operator and ro.build.target_country. For example, TLS and CA, respectively. I did it for the international data icons, but the clock is affected too.
Click to expand...
Click to collapse
This works, but you lose wifi calling and volte..
Swizzle82 said:
This works, but you lose wifi calling and volte..
Click to expand...
Click to collapse
I guess I didn't realize that, but I use neither of those. I use AT&T, so I just turned those off.
loganfarrell said:
I realize this is dead but I stumbled across it. You don't need a pull of system. It's all there, you just need to change build.prop to a non-US carrier for ro.build.target_operator and ro.build.target_country. For example, TLS and CA, respectively. I did it for the international data icons, but the clock is affected too.
Click to expand...
Click to collapse
When I change those to TLS and CA I get stuck with com.android.phone has stopped responding. This is on a Verizon phone. Any thoughts?
Related
It was really annoying me so I did some searching and I found this thread.
Code:
http://forum.xda-developers.com/showthread.php?t=2016254
Basically if you use titanium back up, you can just freeze or delete "com.htc.htcpowermanager" and it'll disappear.
I just thought I'd share with you guys, credit goes to to the guy who found this in the link above, I'm just passing it on.
EDIT: Freezing or deleting it will both cause your battery menu in settings to disappear. This isn't really an issue to me as there isn't really anything in there that you can do, besides see whats' eating your battery. IMO this is negligible especially when new roms will be rolling out soon, hopefully with a work around.
Wouldn't delete it just in u may need it later. Freezing is the best option for all annoying system apps. Thanks for sharing the link tho.
Anthonicia said:
Wouldn't delete it just in u may need it later. Freezing is the best option for all annoying system apps. Thanks for sharing the link tho.
Click to expand...
Click to collapse
Read the edit I just made to the OP.
In JB you can long-tap on a notification and click on App Info. I did a Force Stop there, notification went away. Hopefully there are no other side effects. If there are any, I will report them.
LOL 5 minutes later, and it's back. And you cannot uncheck "Show Notifications"
I used this to get rid of mine. Think its a good alternative.
http://forum.xda-developers.com/showthread.php?t=1601543&page=369
Sent from my EVO using xda app-developers app
Why not just turn it off? Then it doesn't show up in status bar
i'm sure there's a way to hide the icon in smali...someone will find it
rpenrod23 said:
Why not just turn it off? Then it doesn't show up in status bar
Click to expand...
Click to collapse
I have had mine turned off since I loaded the Rom and its still there. If we could just unlock the show notification option maybe that would turn off the one minor annoyance.
Is there documentation on what the power saver function specifically does?
thefsfempire said:
I have had mine turned off since I loaded the Rom and its still there. If we could just unlock the show notification option maybe that would turn off the one minor annoyance.
Click to expand...
Click to collapse
I did to and noticed that it's still in pull-down menu, my bad. I agree, it's annoying
Sent from my EVO
I like it. Others need to Suck it up. People complain about battery HTC offers a little gadet then people cry. Go back to ics.
Sent from my EVO using xda premium
Androidfreakz said:
I like it. Others need to Suck it up. People complain about battery HTC offers a little gadet then people cry. Go back to ics.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Next minor update. They'll let us disable it
Sent from my EVO LTE using xda-developers app
Can't you just edit default.xml in system/customize/resource/MNS/ ? Of course on a clean boot, but that'sbetter then losing functions to me.
Sent From My HTC Evo 4G LTE, On The Now Network From Sprint!
Rydah805 said:
Can't you just edit default.xml in system/customize/resource/MNS/ ? Of course on a clean boot, but that'sbetter then losing functions to me.
Sent From My HTC Evo 4G LTE, On The Now Network From Sprint!
Click to expand...
Click to collapse
add these lines to SettingsProvider in system/customize/CID/default.xml
<item name="def_hide_ui_user_powersaver">1</item>
<item name="def_hide_ui_powersaver_connectivity">1</item>
credit to nitsuj17....you will lose the function though...I haven't tried enabling in terminal with this...maybe it would work
maxpower47 said:
Is there documentation on what the power saver function specifically does?
Click to expand...
Click to collapse
Same here. I'm mostly against it because I don't know why I'd ever need it. It might actually be useful but if it does x y and z and I only want x and y I'd like to know what I'm getting into.
I can't believe no one noticed it yet but if you go to the app info there is a check box for notifications, just uncheck it and it goes away
wolfclan68 said:
I can't believe no one noticed it yet but if you go to the app info there is a check box for notifications, just uncheck it and it goes away
Click to expand...
Click to collapse
I see the check box but mine is grayed out and I can't toggle it. Any idea on how to un gray it?
Sent from my Nexus 10 using Tapatalk 2
tgrgrd00 said:
I see the check box but mine is grayed out and I can't toggle it. Any idea on how to un gray it?
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
Let me know if u figure it out as well. Can't figure it out and I'm usually good at that.
Anthonicia said:
Let me know if u figure it out as well. Can't figure it out and I'm usually good at that.
Click to expand...
Click to collapse
Mine won't toggle neither. I have tried with power save mode enabled and disabled as well as from safe mode.
That's the first place I went and mine is grayed out also.
Here's the change-log for the S4 VRUAME7 update
http://www.droid-life.com/2013/07/1...:+DroidLife+(Droid+Life)&utm_content=FaceBook
Sent from my SCH-I545 using xda premium
Now it clearly says WiFi toggle but I don't have that on my phone
Sent from my SCH-I545 using xda premium
Did anyone get the mysterious wifi toggle after the update? I don't on mine, and I forgot to check my wife's phone before she left, but I'm sure its another thing Verizon added in the log, but didn't add to the device.
reads like a list of what we "blame" on our dev community. :laugh:
boxermansr said:
Did anyone get the mysterious wifi toggle after the update? I don't on mine, and I forgot to check my wife's phone before she left, but I'm sure its another thing Verizon added in the log, but didn't add to the device.
Click to expand...
Click to collapse
Yes, I have it on my 32gb model.
I am not sure of this, but it is likely a factory reset could be needed to gain the WiFi toggle
Sent from my Galaxy S4
Soldi3rxx said:
Now it clearly says WiFi toggle but I don't have that on my phone
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
That's very odd because they clearly state a toggle was added in the change log. .What if you click the edit button, does it show a wifi toggle in the toggle settings screen?
I have no toggle. I tried all the settings I could think of. Im stumped
Sent from my SCH-I545 using xda app-developers app
Weird, I have the Wi-Fi toggle.
Sent from my SCH-I545 using xda app-developers app
I have the WiFi toggle as well
Schoat333 said:
That's very odd because they clearly state a toggle was added in the change log. .What if you click the edit button, does it show a wifi toggle in the toggle settings screen?
Click to expand...
Click to collapse
yeah i tried editing the toggles, everything. Just don't have it. I know some do and some don't. Has anyone who who doesn't have it tried a master reset!
I have it. I didn't upgrade tho I flashed the factory image.
Sent from my SCH-I545 using Tapatalk 2
just wondering if those that got the Wi-Fi are all 32gig????
orcsbane13 said:
I have it. I didn't upgrade tho I flashed the factory image.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
can u provide the factory image. How did you flash it since were no longer rooted? through ODIN? does your wifi hotspot work without subscription check? Heard it works for those on data plans and not on unlimited
Something else I've noticed. I used to use floating notifications, but stopped due to the talkback bug. After the update, I installed FN just to give it another try, and the bug is gone.
Anyone else notice this?
Also, to the guy that asked, I have the wifi toggle and use the 16g version.
I updated (after numerous tries) with the Verizon BS software, and of course, don't have the toggle (its not really the end of the world that I don't), I just find it odd that others do, and others don't. I have the 16GB, and a few who say they have the toggle have stated they have the 32GB (that shouldn't make a difference anyhow). I guess if I get bored enough later, I'll wipe my device and see if it brings it back (just so those who don't have it, and *want* it, know how to *maybe* get it back).
I don't have the WiFi toggle either. Quick thought...
Those of you that don't have the Wi-Fi toggle. Did you rearrange the order?
Those of you that do have the toggle, were you still on the default order?
Might be something to it. I rearranged my toggles...
Sent from my SCH-I545 using Tapatalk 2
Looks like a bunch of useless garbage. Stay rooted my friends.
Sent from my Samsung Galaxy S4
Just got off the phone with VZ about the Wi-Fi not being included in the notification bar as stated in the changelog. They tell me Samsung is aware and will update the update in September or we could try a factory reset which will resend the update. Just repeating what I was told.
Anyone wanna give this a shot, i dont have a recovery so im scared this could bork my device..
http://www.androidpolice.com/2013/0...samsung-devices-running-android-4-2-or-later/
Google play store.
https://play.google.com/store/apps/details?id=ma.wanam.xposed
What's the difference between this and the v12 nottach xposed mod?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
HORiZUN said:
What's the difference between this and the v12 nottach xposed mod?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Click to expand...
Click to collapse
From digging into it nottach quit the development and wanam took the project and continued it and updated it.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
/me deletes v12 nottach. Installs wanam
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Yeah, this has a few more tweaks than nottach so far, and some that didn't work before (Quick Setting tile number wouldn't work on my MF3 I337) are working now. Anyone is safe to install and tweak away as long as you're on stock/tw.
EDIT: nottach xposed does have a few more than this at the moment, I was wrong. Specifcally the full battery and headset notification I've noticed so far.
I'm not sure if this is related but after installing this i noticed my mobile connection would randomly switch to h+ in settings. I rebooted and got the padlock. Booted fine still and noticed an extra battery icon. I only enabled the module and looked at the options without checking or changing anything.
Uninstalled and rebooted. No padlock, no extra icon. Goldeneye MH1 with only scrolling cache and call record add ons.
So I really want to try this out but I have a quick question. As of right now im on MF3 and I am planning on rooting my phone. The only think I would like to be able to do is to have lockscreen widgets on my device while having security enabled such as a pattern lock or password. Will this give me the option to do just that?
blackguy101 said:
So I really want to try this out but I have a quick question. As of right now im on MF3 and I am planning on rooting my phone. The only think I would like to be able to do is to have lockscreen widgets on my device while having security enabled such as a pattern lock or password. Will this give me the option to do just that?
Click to expand...
Click to collapse
nothing will at this time that i know of.
Andrew149 said:
nothing will at this time that i know of.
Click to expand...
Click to collapse
aww damn ok. This is probably the only feature I want out of my phone to be honest lol
Airtioteclint said:
I'm not sure if this is related but after installing this i noticed my mobile connection would randomly switch to h+ in settings. I rebooted and got the padlock. Booted fine still and noticed an extra battery icon. I only enabled the module and looked at the options without checking or changing anything.
Uninstalled and rebooted. No padlock, no extra icon. Goldeneye MH1 with only scrolling cache and call record add ons.
Click to expand...
Click to collapse
Not sure why you getting this but no issues here working 100% on MF3 Stock my second SG4.
Sent From My Galaxy S 4 SAMSUNG-SGH-I337 Running On New Deadly Venom v8.0.0
blackguy101 said:
So I really want to try this out but I have a quick question. As of right now im on MF3 and I am planning on rooting my phone. The only think I would like to be able to do is to have lockscreen widgets on my device while having security enabled such as a pattern lock or password. Will this give me the option to do just that?
Click to expand...
Click to collapse
EDIT: read that wrong, disregard.
Venom0642 said:
Not sure why you getting this but no issues here working 100% on MF3 Stock my second SG4.
Sent From My Galaxy S 4 SAMSUNG-SGH-I337 Running On New Deadly Venom v8.0.0
Click to expand...
Click to collapse
Hey are you positive no issues im on stock mf3, but i have no recovery at all! so i dont wanna try this app and than get a soft brick.
Andrew149 said:
Hey are you positive no issues im on stock mf3, but i have no recovery at all! so i dont wanna try this app and than get a soft brick.
Click to expand...
Click to collapse
I am positive I have no issues at all my friend.
Sent From My Galaxy S 4 SAMSUNG-SGH-I337 Running On New Deadly Venom v8.0.0
Venom0642 said:
I am positive I have no issues at all my friend.
Sent From My Galaxy S 4 SAMSUNG-SGH-I337 Running On New Deadly Venom v8.0.0
Click to expand...
Click to collapse
thanks ill give it a shot.
Airtioteclint said:
I'm not sure if this is related but after installing this i noticed my mobile connection would randomly switch to h+ in settings. I rebooted and got the padlock. Booted fine still and noticed an extra battery icon. I only enabled the module and looked at the options without checking or changing anything.
Uninstalled and rebooted. No padlock, no extra icon. Goldeneye MH1 with only scrolling cache and call record add ons.
Click to expand...
Click to collapse
The extra icon does sound like something that a tweak/app like this can be responsible for.
Whether it's a one-time glitch or a bug that will recur, who knows.
blackguy101 said:
So I really want to try this out but I have a quick question. As of right now im on MF3 and I am planning on rooting my phone. The only think I would like to be able to do is to have lockscreen widgets on my device while having security enabled such as a pattern lock or password. Will this give me the option to do just that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2363189
this showed up in the xda news if you're still looking for something, i'd give it a shot
Can you run more than one module that offer similar functionality? Such as wannam and nottach, without causing problems? Which modules takes precedence?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
blackguy101 said:
So I really want to try this out but I have a quick question. As of right now im on MF3 and I am planning on rooting my phone. The only think I would like to be able to do is to have lockscreen widgets on my device while having security enabled such as a pattern lock or password. Will this give me the option to do just that?
Click to expand...
Click to collapse
3minit can do secure lockscreen widgets.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I tried doing that specifically and did have some issues. Either enable the same tweaks in both or don't run both.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
---------- Post added at 03:54 PM ---------- Previous post was at 03:39 PM ----------
3minit isn't much of an option since you have to flash the framework and we can't through recovery (I think there is an app to flash without recovery, but it's risky business.)
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I know it's not supposed to work. I wasn't expecting it to work. But I tried it anyways.
Slim Bean AOSP 4.3 ROM + Xposed + Wanam all seemed to install fine.
But a reboot or two later, before even selecting any option changes, ended up getting to where it refused to boot into the OS. Even after a factory reset.
Don't jump me, I know it wasn't *supposed* to work.
Guess I just confirmed that for the rest of the 4.3 AOSP guys?
Edit build.prop
ro.lge.capp_lockscreen=true
To
ro.lge.capp_lockscreen=false
Make sure you set the build.prop file permission properly.
AndroidUser00110001 said:
Edit build.prop
ro.lge.capp_lockscreen=true
To
ro.lge.capp_lockscreen=false
Click to expand...
Click to collapse
Works great! Thanks. Getting alot closer to Nexifying the LG G2!
Do you have to unlock to answer the phone?
Should note that double tap to turn off doesn't work with this lockscreen though - need to double tap the status bar...
Is there a way to start widgets maximized by default with this lockscreen or that needs to be changed in code?
I have a smart window case. When I use the stock lock screen with this mod, the screen doesn't turn off when I close it. Its kinda weird. It makes the lock noise. If I lock the screen, opening the case wakes and unlocks the phone. Odd.
Sent from my LG-D800 using xda app-developers app
Smart case,works only with lg specific apps so,it makes since it wouldn't work with android stock lockscreen
Sent from my VS980 4G using XDA Premium 4 mobile app
do I edit the build.prop under system or some other ?
So I tried this, and it resulted in getting stuck at the LG splash screen. I'm on Verizon, is it by chance specific to another carrier? I'm running CleanRom 1.0 with a couple mods (for nav bar and status bar).
Any ideas?
dmbfan13 said:
So I tried this, and it resulted in getting stuck at the LG splash screen. I'm on Verizon, is it by chance specific to another carrier? I'm running CleanRom 1.0 with a couple mods (for nav bar and status bar).
Any ideas?
Click to expand...
Click to collapse
crud...same problem here
I didn't run into any issues. But I am on stock rooted with twrp. You could always try booting into recovery and wipe cache. Hopefully you made a backup prior and can just reflash it
Sent from my VS980 4G using XDA Premium 4 mobile app
---------- Post added at 05:20 AM ---------- Previous post was at 05:19 AM ----------
ipguy said:
do I edit the build.prop under system or some other ?
Click to expand...
Click to collapse
Edit the build prop. Its ask the way at the bottom. Can't use text editor though. I used Google quick office.
Sent from my VS980 4G using XDA Premium 4 mobile app
Anyone have success on Verizon G2 before I edit mine?
Stigy said:
Anyone have success on Verizon G2 before I edit mine?
Click to expand...
Click to collapse
I tried it and got stuck on the LG logo upon boot. Not sure if I had something else conflicting or something. YMMV
---------- Post added at 12:00 PM ---------- Previous post was at 11:58 AM ----------
dneilan1 said:
crud...same problem here
Click to expand...
Click to collapse
Just boot in to TWRP, wipe cache, dalvic and system. Then relfash the rom. Wont lose any data that way.
dmbfan13 said:
I tried it and got stuck on the LG logo upon boot. Not sure if I had something else conflicting or something. YMMV
---------- Post added at 12:00 PM ---------- Previous post was at 11:58 AM ----------
Just boot in to TWRP, wipe cache, dalvic and system. Then relfash the rom. Wont lose any data that way.
Click to expand...
Click to collapse
Okay so maybe there is some dependency on that line in build.prop for some reason.
I will wait until someone gets it working (or has a workaround for Verizon) to mess around with this.
Thanks.
Anyone try this for T-Mobile G2 yet?
EDIT: just tried, does work
Sent from my LG-D801 using XDA Premium 4 mobile app
I had no problems editing my build.prop on VZW CleanROM. Make SURE you put the permissions back after the edit.
I believe permissions are the key. I successfully switched to stock lock screen on VS980 and made sure perms were correct of 644. When I went to revert back to LG lock screen I forgot to change perms and default is 666. Then I saw the failure to boot the kernel with a black screen after the LG bootloader screen like others have seen.
So got to test recovery backup restore and am happy it worked!
Sent from my VS980 4G using Tapatalk 2
Unfortunately the space for on-screen buttons on the lockscreen appear inconsistent, i.e. the standard dark overlay over the wallpaper is cut off at the bottom.
So I tried to give it a shot, but running into weird issue with build.prop editing.
For some reason it only lets me type "fals" and then nothing else displays on the screen. I can't type out the full word "false" instead of true.
Has anyone seen this before? What are you using to edit build.prop?
Stigy said:
So I tried to give it a shot, but running into weird issue with build.prop editing.
For some reason it only lets me type "fals" and then nothing else displays on the screen. I can't type out the full word "false" instead of true.
Has anyone seen this before? What are you using to edit build.prop?
Click to expand...
Click to collapse
Can't edit in text editor on the phone. I moved a copy to my computer, made the edit, moved back and changed permissions. No problems
So after a little bit of tinkering, I've managed to get M8-esque software keys on my One Max. Now I have set about disabling the capacitive home/back keys, but for the life of me, cannot manage to shut them off...does anyone happen to know the file that I need to edit?
Undertake the following AT YOUR OWN RISK, when it comes to ripping out this kind of stuff I HAVE ENOUGH TROUBLE TAKING RESPONSIBILITY FOR MY OWN ACTIONS, LET ALONE YOURS, THEREFORE, I WON'T.
UPDATE: For anyone interested in getting the keys disabled, I managed to finally get them off by using root explorer to edit the contents of:
- system/usr/keylayout/max1187x_touchscreen_0.kl
- system/usr/keylayout/himax.touchscreen.kl
- system/usr/keylayout/synaptics-rmi-touchscreen.kl
All contents of these files were backed up and deleted. Reboot and enjoy!
(I'd tried #ing them, and deleting the contents individually, but it only seems to work when ALL are blanked, someone who actually knows what they're doing can probably clarify if this is overkill)
belly of the beast said:
So after a little bit of tinkering, I've managed to get M8-esque software keys on my One Max. Now I have set about disabling the capacitive home/back keys, but for the life of me, cannot manage to shut them off...does anyone happen to know the file that I need to edit?
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You mind sharing how you did it ?
Sent from my HTC6525LVW using Tapatalk
waco2hot33 said:
You mind sharing how you did it ?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Well I suspect what made it so very easy was the fact that I was on the 4.4/Sense 6 M8 port that Flyhalf posted a few weeks ago. Since it was an M8 port, I just assumed they'd be hidden in there.
You can get them up with a text edit, or you can go the easy route and use
https://play.google.com/store/apps/details?id=com.fatedevgroup.softkeyenabler
I have no idea if this would work on stock One Max ROMs, but it's worth a shot.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
belly of the beast said:
Well I suspect what made it so very easy was the fact that I was on the 4.4/Sense 6 M8 port that Flyhalf posted a few weeks ago. Since it was an M8 port, I just assumed they'd be hidden in there.
You can get them up with a text edit, or you can go the easy route and use
https://play.google.com/store/apps/details?id=com.fatedevgroup.softkeyenabler
I have no idea if this would work on stock One Max ROMs, but it's worth a shot.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
button savior also works.
i've been looking for how to disable the hard keys but haven't found it. I was thinking maybe using Xposed Additions to see if I could just remap the buttons to no action or something but haven't had the chance
It'll work on stock or ports 4.4.x only but use Xposed then install GravityBox and you can add soft keys and you can turn off hard keys......... Nuff said!
waco2hot33 said:
You mind sharing how you did it ?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
---------- Post added at 10:39 PM ---------- Previous post was at 10:33 PM ----------
I heard you can quickly edit your build.prop or you can adb pull framework-res.apk decompile it with ApkTool and edit the I think bool.XML I dunno its been a while and change show navbar from false to true then recompile it and push it back.. Restart the Android system wait for it to optimize apps and profit LOL... That's a somewhat permanent solution unless you reverse the method
Murrda said:
It'll work on stock or ports 4.4.x only but use Xposed then install GravityBox and you can add soft keys and you can turn off hard keys......... Nuff said!
---------- Post added at 10:39 PM ---------- Previous post was at 10:33 PM ----------
I heard you can quickly edit your build.prop or you can adb pull framework-res.apk decompile it with ApkTool and edit the I think bool.XML I dunno its been a while and change show navbar from false to true then recompile it and push it back.. Restart the Android system wait for it to optimize apps and profit LOL... That's a somewhat permanent solution unless you reverse the method
Click to expand...
Click to collapse
Hmm, I've been looking into gravitybox, but I can't seem to find any option to completely disable the hardware keys. I do see how I can map double and long presses, but nothing for just general presses. (Although if I could define the length of a long press at a laughably short time, e.g. 1ms, then assign no long press function.....that could be a janky way of getting the job done)
Sent from my HTC6525LVW using XDA Premium 4 mobile app
The most infuriating part of this is the fact that I've been digging in system/usr/.../keylayout, systematically #ing out instances of the desired keys, but they just never ever ever unbind.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Haha! I've fumbled my way to success! OP updated for any one who might want to do the same.
Sent from my HTC6525LVW using XDA Premium 4 mobile app