Hello,
I want to switch from CWM to TWRP.
The problem is, that when I flashed CWM, my android was 4.1.2 version, and so was the recovery.
I've already flashed newer rom than 4.1.2, and now I want to switch to TWRP.
My concern is: Now that I downloaded the latest TWRP and I use Nandroid, it prompts me that the TWRP .img file is built for 4.1.2 android, so can I still flash the TWRP although I have higher version than 4.1.2?
*Also, is Nandroid a working way to switch between recoveries? I've never done that before, and I just came across a thread that suggests using Nandroid to flash new reocvery over the existing one.
Thanks!
TWRP or CWM Recoveries will work in all android versions. Just download twrp-2.8.6.1-i9300.tar flash it via odin. Here is the link - https://dl.twrp.me/i9300/
Related
Hi all, I'm looking forward to your help. Current state of my phone is a bootloop straight into TWRP with failed installs of Kitkat/gapps and failed restore of my backup. Here's a step by step of what I've done.
1. Opened Goomanager, updated TWRP using the button (current version 2.6.3.0)
2. Downloaded AOKP kitkat nightly and pa gapps - download completes and MD5 hashes check out
3. Used goomanager "flash zips" interface to attempt flash, with factory reset option and backup option selected
4. Came back to find my phone stuck at TWRP with failed flash
5. Tried to flash again manually, using the standard TWRP flashing page
6. Failed again.
7. Decided to cut my losses and restore the backup created when I first attempted to flash via Goomanager
8. Restore fails.
9. Phone fails to load system, reverts into TWRP when it fails.
10. So now I can't restore my old android system and I can't flash a fresh one.
Where do I go from here? Is my version of TWRP dodgy and giving bad flashes? Should I downgrade it via adb? My phone was fine until an hour ago, so I don't think it's a hardware issue. Many thanks for your help. Tom
Did you try to flash a stock rom via Odin (in case you can get to dl mode) or via recovery (you need to get a flashable stock rom for that). I have not experience with twrp though, maybe you could also try philz recovery (I think I read somewhere that kitkat had problems with twrp).
Sent from my GT-I9300 using xda app-developers app
Twrp let me recover my backup after I pulled the battery rather than just use twrps reboot option. So at least I have a functioning phone now. Odin was always my last resort, but I have a mac so finding someone's pc to use is a bit annoying/embarrassing. I'm going to try re-downloading the kitkat rom and see if that fixes it, but it seems unlikely considering it passed an MD5 check after download. Thanks for taking the time to reply.
reading through other KitKat threads, people had reported all kind of strange behavior with TWRP.
Philz recovery (last version, or 6.00.8) didn't have any issues with KitKat (using it atm.)
Tom-Tom07 said:
reading through other KitKat threads, people had reported all kind of strange behavior with TWRP.
Philz recovery (last version, or 6.00.8) didn't have any issues with KitKat (using it atm.)
Click to expand...
Click to collapse
thats what I read as well. the Slim team for instance recommends Philz and not TWRP if I am not wrong
I had little issue moving up to 4.0.4 so I don't have to worry about the EMMC erase bug, but I'm realizing I have no way to get up further.
Everything seems to require CWM or a version of TWRP that has no compatible kernels with 4.0.4 best I can do is Siydah and like 6.0.1.2 and looks like CWM but its rather sparse on the details.
Final edit, I found a much better solution.
It does not seem as though you can flash a upgraded kernel from the CWM interface itself and reboot reliably failed on multiple kernels.
Solution
Download mobile Odin
Download the 4.4 ROM of your choice (compatable)
Gapps too stick them all somewhere you can find them (i just leave em in downloads)
Download and flash CWM 6.0.4.4 for Kitkat i777.. no clue where I found it wasn't on XDA though.
Turn the phone off (if you reboot and don't reboot too recovery you get a loop)
Boot to recovery (if you get in a loop here pull the battery THEN boot to recovery)
Now you'll notice your not on your old version of CWM anymore.
Install your ROM and Gapps.
Boot to rom
Boot back to recovery Now your once again on a different version of CWM.
I strongly advise cleaning everything up and installing it again I had some issue until I did.
GL to anyone who finds this thread. If there seems to be a need I could rewrite it with a better title.
TheEgonSpengler said:
I had little issue moving up to 4.0.4 so I don't have to worry about the EMMC erase bug, but I'm realizing I have no way to get up further.
Everything seems to require CWM or a version of TWRP that has no compatible kernels with 4.0.4 best I can do is Siydah and like 6.0.1.2 and looks like CWM but its rather sparse on the details.
Final edit, I found a much better solution.
It does not seem as though you can flash a upgraded kernel from the CWM interface itself and reboot reliably failed on multiple kernels.
Solution
Download mobile Odin
Download the 4.4 ROM of your choice (compatable)
Gapps too stick them all somewhere you can find them (i just leave em in downloads)
Download and flash CWM 6.0.4.4 for Kitkat i777.. no clue where I found it wasn't on XDA though.
Turn the phone off (if you reboot and don't reboot too recovery you get a loop)
Boot to recovery (if you get in a loop here pull the battery THEN boot to recovery)
Now you'll notice your not on your old version of CWM anymore.
Install your ROM and Gapps.
Boot to rom
Boot back to recovery Now your once again on a different version of CWM.
I strongly advise cleaning everything up and installing it again I had some issue until I did.
GL to anyone who finds this thread. If there seems to be a need I could rewrite it with a better title.
Click to expand...
Click to collapse
Always remember that when you flash a ROM, that you typically get the Recovery that is tied to the Kernel contained in that ROM. So, you flashed the Kernel, got Recovery A, then you flashed the ROM and got Recovery B. A KK Kernel can be flashed independent of a KK ROM, and will add different/additional/improved functionality, depending on the dev, but it also contains it's own Recovery in most cases.
desteele said:
Always remember that when you flash a ROM, that you typically get the Recovery that is tied to the Kernel contained in that ROM. So, you flashed the Kernel, got Recovery A, then you flashed the ROM and got Recovery B. A KK Kernel can be flashed independent of a KK ROM, and will add different/additional/improved functionality, depending on the dev, but it also contains it's own Recovery in most cases.
Click to expand...
Click to collapse
"Everything seems to require CWM or a version of TWRP that has no compatible kernels with 4.0.4 best I can do is Siydah and like 6.0.1.2 and looks like CWM but its rather sparse on the details. "
Yes I know, thanks for the advice.
TheEgonSpengler said:
"Everything seems to require CWM or a version of TWRP that has no compatible kernels with 4.0.4 best I can do is Siydah and like 6.0.1.2 and looks like CWM but its rather sparse on the details. "
Yes I know, thanks for the advice.
Click to expand...
Click to collapse
Oh, sorry...sounded like you expected to find the latest recoveries on JB kernels. My bad.
desteele said:
Oh, sorry...sounded like you expected to find the latest recoveries on JB kernels. My bad.
Click to expand...
Click to collapse
Nah, you just can't install the latest ROM with an older recovery.
So if you want to go up you have to do the little dance I described above. (Yes I know certain walkthroughs indicate you can do the first step in recovery, I simply found that to not be true and gained me only bootloops and the joys of reflashing stock then reinstalling a updated-er version so I could try again.)
wil this work in my situation
Quick question.. am on:
android 4.1.2
Shostock v 3.0.2
my cwm v6.0.2.7.
I want to move for a slimmer kitkat rom..
i searched forum but i am unable to find way to install recovery to install Cm12.1 from official link official site have recovery *.img and ROM zip but i find no solution on how to install recovery
In my other phone(htc,xiaomi) i can just reboot to bootloader and fastboot flash recovery but this method is not working on samsung phone
kindly update me or show xda link showing how to install CM12.1 recovery on my SII 9100 T model phone i already downloaded ROM and Recoveyr.img from
https://download.cyanogenmod.org/?device=i9100
Does my i9100 T model support 12.1 ?
KiranP23 said:
i searched forum but i am unable to find way to install recovery to install Cm12.1 from official link official site have recovery *.img and ROM zip but i find no solution on how to install recovery
In my other phone(htc,xiaomi) i can just reboot to bootloader and fastboot flash recovery but this method is not working on samsung phone
kindly update me or show xda link showing how to install CM12.1 recovery on my SII 9100 T model phone i already downloaded ROM and Recoveyr.img from
https://download.cyanogenmod.org/?device=i9100
Does my i9100 T model support 12.1 ?
Click to expand...
Click to collapse
Forget about the recovery.img. I don't know why it is there. On the i9100(and i9100T), there is no seperate recovery partition. It is bundled with the kernel. So if you have a custom recovery that is capable of flashing a lollipop rom, just use that. Once you have flashed CM12.1, the CM recovery(kernel) will overwrite the recovery(kernel) you had anyway. Which is not a good thing(not that you have a choice). Currently the CM recovery is not very functional compared to CWM or TWRP
noppy22 said:
Forget about the recovery.img. I don't know why it is there. On the i9100(and i9100T), there is no seperate recovery partition. It is bundled with the kernel. So if you have a custom recovery that is capable of flashing a lollipop rom, just use that. Once you have flashed CM12.1, the CM recovery(kernel) will overwrite the recovery(kernel) you had anyway. Which is not a good thing(not that you have a choice). Currently the CM recovery is not very functional compared to CWM or TWRP
Click to expand...
Click to collapse
Thank you that answers many things , now can u kindly provide a LINK to recovery which is supported by my S2 I9100 T and flashing method so i can install CM12.1 nighties
KiranP23 said:
Thank you that answers many things , now can u kindly provide a LINK to recovery which is supported by my S2 I9100 T and flashing method so i can install CM12.1 nighties
Click to expand...
Click to collapse
I'm assuming you have stock unrooted firmware? The easiest way is to install philz kernel from stock(3e) recovery, then reboot to recovery and flash a newer recovery that is capable of flashing the newer versions of android. If you just want to install CM12.1 straight away just back up your efs then:
1. Download the DVLSH kernel .zip from HERE
2. Download the philz 6.48.4 from HERE
3. Reboot into stock recovery, flash the DVLSH kernel(if your firmware build is DVL**, you could probably reboot into system no problem)
4. Reboot to recovery(not system), flash the philz 6.48.4
5. Reboot to recovery(not system), follow the steps for installing in the CM12.1 thread after backing up etc
Keep the DVLSH kernel. Once you install CM, you will have CM recovery, which only allows you to flash signed .zips(which this one is)
EDIT - The philz 6.48.4 is also signed and is probably the more useful one to keep, being compatible with the newer roms
noppy22 said:
I'm assuming you have stock unrooted firmware? The easiest way is to install philz kernel from stock(3e) recovery, then reboot to recovery and flash a newer recovery that is capable of flashing the newer versions of android. If you just want to install CM12.1 straight away just back up your efs then:
1. Download the DVLSH kernel .zip from HERE
2. Download the philz 6.48.4 from HERE
3. Reboot into stock recovery, flash the DVLSH kernel(if your firmware build is DVL**, you could probably reboot into system no problem)
4. Reboot to recovery(not system), flash the philz 6.48.4
5. Reboot to recovery(not system), follow the steps for installing in the CM12.1 thread after backing up etc
Keep the DVLSH kernel. Once you install CM, you will have CM recovery, which only allows you to flash signed .zips(which this one is)
EDIT - The philz 6.48.4 is also signed and is probably the more useful one to keep, being compatible with the newer roms
Click to expand...
Click to collapse
thankyou i will backup efs with efs backup application form playstore then follow the procedure
thankyou , like you installed flashed recovery i installed from official LInk , flashed nano gapps = boots ,keyboard FC , after sometime frequent random reboots heavily
installed again after full formating ,wipe,dav cache etc flash only cm12.1 nighties =still FC keyboard and random reboots
help me pls
kbxdauser2011 said:
Kiran, i'm in the same stage as you for installing cm 12.1.1 on my SGS2 (GT-I9100) Stock 4.1.2 Rom (Non rooted). Can you please share the steps (step by step) you took to took to install the same . Also how good or Bad is it to be used as a daily regular rom compared to the Samsung Stock rom for the SGS2 (GT-I9100)?
Click to expand...
Click to collapse
noppy22 said:
I'm assuming you have stock unrooted firmware? The easiest way is to install philz kernel from stock(3e) recovery, then reboot to recovery and flash a newer recovery that is capable of flashing the newer versions of android. If you just want to install CM12.1 straight away just back up your efs then:
1. Download the DVLSH kernel .zip from HERE
2. Download the philz 6.48.4 from HERE
3. Reboot into stock recovery, flash the DVLSH kernel(if your firmware build is DVL**, you could probably reboot into system no problem)
4. Reboot to recovery(not system), flash the philz 6.48.4
5. Reboot to recovery(not system), follow the steps for installing in the CM12.1 thread after backing up etc
Keep the DVLSH kernel. Once you install CM, you will have CM recovery, which only allows you to flash signed .zips(which this one is)
EDIT - The philz 6.48.4 is also signed and is probably the more useful one to keep, being compatible with the newer roms
Click to expand...
Click to collapse
please look at above steps
Hello everybody, as the title says, I currently have this configuration. My father's phone always reports memory is full and I decided to upgrade the phone to a different ROM, possibly one which is light. Anyway I found different threads about IsoRec recovery but I didn't understood what are we talking about. Also, I was not able to understand what to do and which files to flash, even if, just for an example, I wish to flash latest CM13. I think that an old recovery which supports Android 4.1.2 doesn't support Android 6.0 to be flashed via zip, so I would probably mess up something. So, what should I do? Flash something with ODIN via PC? Or there's something I can do directly from the phone to update recovery and then flash the ROM's zip? Thank you!
Hi,
You can follow the instructions here to install CM12.1 first:
Download cm-12.1-XXXXXXXX-UNOFFICIAL-i9100.zip to your sdcard
Make sure you're using a Kitkat Compatible Recovery
Boot into Recovery
Wipe all your data
Flash cm-12-.1XXXXXXXX-UNOFFICIAL-i9100.zip from sdcard
(Optional)Flash Google Apps.zip from sdcard
Reboot
Click to expand...
Click to collapse
Once installed, follow this guide to upgrade to CM13:
[GUIDE][NOOB-FRIENDLY]Want to update to CM13? Read this first!
Good Luck! - gsstudios
Hello.I would like to try the latest Marshmallow rom.As i am on latest LP..Can i flash the rom with same recovery?(nut's dual recovery) and later return to my restored LP rom with again the same recovery?
Thanks.
anyone?at least can someone tell me which version of supersu can i put inside prf creator?
hey there
Make a backup of your LP ROM.
In the first post you can find a prerooted MM ROM for the SGP611 (WiFi Version), i just flashed it and it worked.
Here
Also you can restore your /data from your Backup in recovery after flashing the ROM, so you don't have to set up everything again (you can also use TitaniumBackup).
The only thing you have to do is reinstalling the xposed framework if you were using it.
And you're done.
I don't know if you can switch back to LP, since the MM Rom flashed new Firmware. Haven't tried it yet.
Also i use TWRP as recovery and i would suggest you that too.
thanks.is there any method for rooting with supersu as i trust it more?Also the rom from this thread is the latest Marshmallow?Also with restore i mean if i for some reason dont like Marshmallow..Will i be able to restore my previous Lollipop backup from twrp?