I try to do an update to android 4.4.2 from siswoo phone r8, where the hardware is substantially equal to zp999 with the ability to upgrade to Android 5.1.1.
I was to upgrade and touched the phone and upgrade stopped at 41%, when i reboot the phone it goes into recovery mode.
I tried a second time and the upgrade went well, but from here I can not control the phone with 3 buttons and the virtual keyboard, the numbers 1,2 and 3 are right, but the nº 4,5 and 6, to write I have to carry the numbers 7,8 and 9. the numbers 7,8 and 9 have to write the touching below them.
After I returned to the latest original rom ZOPO zp999 (ZP999_20150212-183927 kk) but remained the same.
Has anyone had this problem before?
Can you suggest me some idea to resold this problem?
xixefiles said:
I try to do an update to android 4.4.2 from siswoo phone r8, where the hardware is substantially equal to zp999 with the ability to upgrade to Android 5.1.1.
I was to upgrade and touched the phone and upgrade stopped at 41%, when i reboot the phone it goes into recovery mode.
I tried a second time and the upgrade went well, but from here I can not control the phone with 3 buttons and the virtual keyboard, the numbers 1,2 and 3 are right, but the nº 4,5 and 6, to write I have to carry the numbers 7,8 and 9. the numbers 7,8 and 9 have to write the touching below them.
After I returned to the latest original rom ZOPO zp999 (ZP999_20150212-183927 kk) but remained the same.
Has anyone had this problem before?
Can you suggest me some idea to resold this problem?
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Unfortunally i couldn't find the device forum for your mentioned one so the better way to ask is to do it here >>> Android Q&A, Help & Troubleshooting
Good luck!
hello Oradea, thank you.
Do i need to make a new post or it's possible to move this post to Android Q&A, Help & Troubleshooting?
xixefiles said:
hello Oradea, thank you.
Do i need to make a new post or it's possible to move this post to Android Q&A, Help & Troubleshooting?
Click to expand...
Click to collapse
Yup, i will do it for you.
After doing some research, I suspect that the problem is the corrupt drivers. could follow in the footsteps of the Chinese recovery menu (vol down + power) and did a reset factory but failed after booting.
I tested where the touch screen was sensitive and the right and bottom can not draw anything and the 3 buttons (menu, home and back) don't work.
When you start the phone, these 3 buttons light up for 2 to 3 seconds and then go out. Is it software problem (drivers) or will even touch screen?
I tried to follow this post http://forum.xda-developers.com/g4/general/fix-screen-issues-t3172100/page4 but I could not do anything due to being a bit technical.
Someone could please help me?
The drivers that control the touch screen are initially loaded by build.prop file, if so it is possible to provide that file from a zp999?
Related
Hi,
I have a Samsung galaxy Wi-Fi 5.0 16 GB model:YP-G70EW (I think it was this update G70XXKPH)
What did I do you ask?
Click settings-about-check for updates it found one clicked okay it started to download and finished the installation
and my device keeps on rebooting. I see the Samsung logo from 19 seconds,
what should I do?
Thanks in advance.
You probably need to wipe your data and cache partition. That can be done by booting into recovery mode (Home+Vol Up+Power).
Thanks for your fast response, but the (home+volume up+power) does nothing
(Power+volup) I selected -wipe cache partition- did not work, so I chose to -wipe data/factory reset- no help also anymore tips?
By the way, in the android system recovery<3e> window. I see something else weird, This is exactly what it says
– – Copying media files...
Successfully copied meida files.
#Manual mode#
– – Applying Multi-csc...
Successfully applied multi–CSC.
I know that my English is that good but do you see something weird here or is it just me?
Does it even get into android or does it just keep rebooting from the samsung logo?
I don't think so, it shows the Samsung logo for 19 seconds(19 sec every time)and reboots.
I can't even shut the device down. Try to contact Samsung support but no response yet it's been almost 24 hours.
PS. Can anybody give me some e-mail addresses for Samsung support you can PM if you want.
Thx.
Wh1tedev1l said:
I don't think so, it shows the Samsung logo for 19 seconds(19 sec every time)and reboots.
I can't even shut the device down. Try to contact Samsung support but no response yet it's been almost 24 hours.
PS. Can anybody give me some e-mail addresses for Samsung support you can PM if you want.
Thx.
Click to expand...
Click to collapse
If you hold the power button it should shut it down.
The shutdown button did work, only after 10 seconds holding down luckily the screen stays on for 19 sec.
Wh1tedev1l said:
The shutdown button did work, only after 10 seconds holding down luckily the screen stays on for 19 sec.
Click to expand...
Click to collapse
if you try flashing a kernel and rom meant for your device it should work again.. it sounds like something just got messed up with the flashing process (which does happen occasionally).
Sent from my SGP5
I have never done this how should I proceed?(Please give as much details as you can)
It probably involves a micro-SD, luckily i ordered one two hours ago, should arrive tomorrow morning.
Thx
Guide to flashing http://youtu.be/0imhKnMtQ9A
Hi guys,
well I just got an e-mail from samsung support that I should get it serviced to get the issue fixed(after 2 e-mails they answered back, well… It's something)
They send a link http://www.samsung.com/us/support/service/request,
so I choose option 1
model code: ?? YP-G70EW but I don't see my code on their site, what the hell should I do with this.
e-mail address: (at least I know this one.LOL)
I wonder if I should have gone through Samsung Belgium
address http://www.samsung.com/be/ another problem I can't even find this product their! Or model number
Could you guys give me some tips what to do.
And bit more information about my product
Samsung galaxy Wi-Fi 5.0 16GB (with the physical bottom) so the international one(right?)
model number: YP-G70EW
And which version of Oden versions should I use, and link please.
which kernel and rom should I use link also please.
damn, I'm demanding today
First: If you really want to flash a ROM, your guarantee expires.
The version with the physical Homebutton is the international.
You should always use the newest version of Odin.
Here is the link:
http:// www.google.com/url? sa=t&rct=j&q = & esrc=s&source=web&cd=2&sqi=2&ved=0CDwQFjAB&url=http%3A%2F%2Fforum.xda-developers.com%2Fattachment.php %3Fattachmentid%3D581913%26d%3D1304094576&ei=xGh0T-_ AEqGr0QXO1JX3Dw&usg=AFQjCNF7sF0f2yJp0IxHp1ISlP2fzGKhtw
And here the links to the Stock ROMs:
France: http:// www.sammobile.com/firmware/? Page=3&t=1&o=1&m=YP-G70&r=1 #
Italy: http:// www.sammobile.com/firmware/? Page=3&t=1&o=1&m=YP-G70&r=1 #
Sweden: http:// www.sammobile.com/firmware/? Page=3&t=1&o=1&m=YP-G70&r=1 #
I know that Belgium is not included in the list, but the ROMs should work with your device.
I've had the same exact issue as yours except I decided to fix it myself rather then check it in to be serviced.
I was a complete noob when doing it and I've managed to soft-brick my device during the process, but it was fun and I quickly learned to unbrick it and flashed a new stock ROM.
That was an awesome journey into Android I recommend to anyone (recommend; no responsibilities tho).
Anyway if you decide to take this path, beware that there are several versions of the Galaxy player 5.0 (US, Europe and others), you must verify that the ROM you're about to flash matches your device version, otherwise you'll eat ****.
Anyway checkout my post and its replies, I'm sure it will be valuable to you:
http://forum.xda-developers.com/showthread.php?t=1546068
Sent from my YP-G70 using XDA
I have a galaxy player 4.0 and it keeps rebooting and it's because I tried to install a custom boot logo. I can still go in download mode and Odin mode but does anyone know a custom bootloader I can install so I can access the files on my device because if I can delete the file I want to then it will work again.
Can anyone help me get set up with CWM recovery on my generic A13-MID tablet? I have been searching forums and google for quite a while and have not found the information I am looking for. I have a 7" tablet running Android 4.0.3 (rooted). I have installed plenty of custom roms, etc on my droid phone, but I am new to the tablet and with a knock-off device, I am really struggling to find the info I need. One obstacle is that for physical buttons I only have a Volume +/- and Power (no back button), but I have read that people have installed CWM with touch capabilities instead of having to use the physical keys. I just really want to be able make a nandroid backup of my current working system...any thoughts??? Thanks!
ockicker13 said:
Can anyone help me get set up with CWM recovery on my generic A13-MID tablet? I have been searching forums and google for quite a while and have not found the information I am looking for. I have a 7" tablet running Android 4.0.3 (rooted). I have installed plenty of custom roms, etc on my droid phone, but I am new to the tablet and with a knock-off device, I am really struggling to find the info I need. One obstacle is that for physical buttons I only have a Volume +/- and Power (no back button), but I have read that people have installed CWM with touch capabilities instead of having to use the physical keys. I just really want to be able make a nandroid backup of my current working system...any thoughts??? Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=33349032#post33349032
here u go this cwm is working perfectly for all allwinner a13
icoolguy1995 said:
http://forum.xda-developers.com/showthread.php?p=33349032#post33349032
here u go this cwm is working perfectly for all allwinner a13
Click to expand...
Click to collapse
Thank you, I will give it a go later today. The only other thing that concerns me is the lack of a Back button on my tablet. Do you think I'm going to run into problem while in CWM without the ability to hit a Back button?
Thanks!
ockicker13 said:
Thank you, I will give it a go later today. The only other thing that concerns me is the lack of a Back button on my tablet. Do you think I'm going to run into problem while in CWM without the ability to hit a Back button?
Thanks!
Click to expand...
Click to collapse
Just flashed CWM per your instructions - very nice! Only other question I have is how to get to CWM manually (not form novo7tools) when the tablet is off...I tried the usual Volume Up + Power, but I get nothing.
ockicker13 said:
Just flashed CWM per your instructions - very nice! Only other question I have is how to get to CWM manually (not form novo7tools) when the tablet is off...I tried the usual Volume Up + Power, but I get nothing.
Click to expand...
Click to collapse
just press the power button with volume up for 5 to 8 seconds the release the power button !
I actually can't get it to boot to CWM with the hardware buttons...not sure what's going on, but hopefully I won't get to the point where I need to do that.
try with volume down button !
did you have any problems installing the usb drivers, if not can you post the drivers you used as I have tried downloading drivers and my device is not being recognised
I already installed the novo7 tool and did the instructions posted on the link given, still it didn't able to enter in the recovery mode, and all I got is a android logo lying down with a red triangle icon with a "!" inside it.
sirhca said:
I already installed the novo7 tool and did the instructions posted on the link given, still it didn't able to enter in the recovery mode, and all I got is a android logo lying down with a red triangle icon with a "!" inside it.
Click to expand...
Click to collapse
did u extract the recovery ?
A13 7" Capacitive Touch Screen Android 4.0 Tablet
icoolguy1995 said:
did u extract the recovery ?
Click to expand...
Click to collapse
you can also find the information here androidhkmarket.co.nr they are a new forum
editing build prop for allwinners q88 7in tab
hi I edit my allwinners Q88 tab to
ro.pr - model =GT-N7100
ro.pr-brand=samsung
Ro.pr-name=t03gxx
ro.po-manufactuer=samsung
ro.po-device=t03g
This is for the samsung galaxy note s 2 I used ro editer so I could play new gameloft games like modern combat 4 and gangstar rio city
Now that the games are fully downloaded on my Q88 that's showing the play store its the note s 2 how can I get the games to play more stabile
Should I overclock can anyone help
Thanks Mondayred9
mondayred9 said:
hi I edit my allwinners Q88 tab to
ro.pr - model =GT-N7100
ro.pr-brand=samsung
Ro.pr-name=t03gxx
ro.po-manufactuer=samsung
ro.po-device=t03g
This is for the samsung galaxy note s 2 I used ro editer so I could play new gameloft games like modern combat 4 and gangstar rio city
Now that the games are fully downloaded on my Q88 that's showing the play store its the note s 2 how can I get the games to play more stabile
Should I overclock can anyone help
Thanks Mondayred9
Click to expand...
Click to collapse
if the games are working fine than no need to overclock !
Someone Solve the BACK-BUTTON problem?
My tab have only Volume Keys and Power and in CWM i must reboot every time i wanna come back!
News for the TOUCH version?
buttons
ockicker13 said:
I actually can't get it to boot to CWM with the hardware buttons...not sure what's going on, but hopefully I won't get to the point where I need to do that.
Click to expand...
Click to collapse
on my a13 MID i pressed the physical home button and the down button. its a pain since the buttons are stiff and close together and i hace to hold it for quite a while -_-
-_-
pjvaliant said:
Someone Solve the BACK-BUTTON problem?
My tab have only Volume Keys and Power and in CWM i must reboot every time i wanna come back!
News for the TOUCH version?
Click to expand...
Click to collapse
i have to reboot to go back. my fingers like die after rebooting it twice thats cuz its like ported from cwm for another tablet
A13 qs701b
Hi, I have chinesse tablet A13
model number: gs701b
android version: 4.0.3
kernel version. 3.0.8
build number: eng.lvle.20121201.092314.wineluo
It will work this CWM for my table and this http://forum.xda-developers.com/showthread.php?p=33349032#post33349032
icoolguy1995 said:
did u extract the recovery ?
Click to expand...
Click to collapse
same problem here all i get is ! noww its gone n i cant power up yes i did extract HELP
Well i'm glad there is still some interest here. I had a lot of stuff going on and basically haven't used my tablet for a few months. Hopefully someone can (or already has) figure this out...
Sent from my A13-MID using xda app-developers app
Stuck on boot, cannot go into recovery anymore
I rooted and installed recovery for my A13-MID tablet by Lutema, http://forum.xda-developers.com/showthread.php?p=33349032#post33349032, i was stuck in recovery for a while, then i reset to factory settings since i couldn't get it to NOT boot into recovery, i did a factory reset to see if that would fix it, just made it worse, tablet is stuck on manufacturer's splash screen at the beggining, how can i reflash?? didnt make a backup. can anyone provide a rom or instructions on how to do it?
Just wondering if anyone here uses the Gadmei E8-HD tablet in this forum
I am sorry if I am using the wrong part of the forum to post this topic because Im not sure which part to use
axeman222 said:
Just wondering if anyone here uses the Gadmei E8-HD tablet in this forum
I am sorry if I am using the wrong part of the forum to post this topic because Im not sure which part to use
Click to expand...
Click to collapse
Hi.
I have the gadmei e8hd with last original firmware 4.0.4 and root
rello76 said:
Hi.
I have the gadmei e8hd with last original firmware 4.0.4 and root
Click to expand...
Click to collapse
How did you update to 4.0.4 and root it?
I looked on the Chinese forums and people are saying updating it will brick your device so I'm afraid of updating it
any ideas on how to update it without bricking it?
axeman222 said:
How did you update to 4.0.4 and root it?
I looked on the Chinese forums and people are saying updating it will brick your device so I'm afraid of updating it
any ideas on how to update it without bricking it?
Click to expand...
Click to collapse
Maybe.. i'm lucky..
I'd update by standard recovery... with the update in gadmei web site.
I'd flash it 2 times because for root the device with a wrong software i'd half brick it...
rello76 said:
Hi.
I have the gadmei e8hd with last original firmware 4.0.4 and root
Click to expand...
Click to collapse
How did you root it?
Can you help to guide me?
Thanks
I also have this tablet, bought it on Sunday. I updated the software to the 1026 the otherday, update went as planed. It was only the 1011 (or something like that) that was bricking their tablets.
Tablet seems ok to appart from 2 big problems 1st is the wifi is really weak on mine, i need to use a mini usb to ethernet adapter to get online reliably.
2nd problem is I dont seem to be able to download anything from the play maket, I keep getting 101 download errors.
I have read that clearing the market cache, data and from google services framework and logging out from accounts on the tablet and restarting and hard reseting should clear the problem but it dosent.
Anyone else having google play problems or is it just me
The tablet seems to be recognised by google play as its in my list of devices along with my ZTE blade which still has the ability to download apps.
Thanks for any help.
Mark.
Play store working now. Rooted too using root_by_hewuqiku.zip.
Anyone know of anyone making ROMs for this tablet?
kram81 said:
Play store working now. Rooted too using root_by_hewuqiku.zip.
Anyone know of anyone making ROMs for this tablet?
Click to expand...
Click to collapse
Good question, i would be happy to find somebody.. The original ICS is not that good ported. I use MyAudio 808DCC (what is the same tab with different brand name) with Gadmei ROM.
This tablet is also sold as "iToos i8". On their forum it was said 4.1 is in beta stage but not stable yet. It's not expected to be released this year (remember chinese new year begins in february).
But some custom ROM would be nice. Btw. does anybody else here have problems that the E8HD won't wake up after standby and just stay with black screen? I have to force it to shut down by pressing the powerswitch for about 10 seconds and hear some noise from speaker, then it will reboot fine.
sebr said:
This tablet is also sold as "iToos i8". On their forum it was said 4.1 is in beta stage but not stable yet. It's not expected to be released this year (remember chinese new year begins in february).
But some custom ROM would be nice. Btw. does anybody else here have problems that the E8HD won't wake up after standby and just stay with black screen? I have to force it to shut down by pressing the powerswitch for about 10 seconds and hear some noise from speaker, then it will reboot fine.
Click to expand...
Click to collapse
This issue has been fixed for me with latest the update from Oct 26.
Hi,
I have a tablet brand Mediacom 870 S2 = GADMEI E8-HD
I've updated the tablet with the ROM 20121026
I got permission to ROOT
busybox does not work but perhaps is a ClockworkMod to ensure that the functions
Edit:
Solved
...Sorry for bad english
Latest official firmware 20121128 is available (still 4.0.4).
Download here:
http://pan.baidu.com/share/link?shareid=146161&uk=2586349326
Release note here (in chinese, but translation is quite understandable)
http://bbs.gadmei.com/forum.php?mod...&extra=page=1&filter=typeid&typeid=6&typeid=6
LP Cox said:
Good question, i would be happy to find somebody.. The original ICS is not that good ported. I use MyAudio 808DCC (what is the same tab with different brand name) with Gadmei ROM.
Click to expand...
Click to collapse
I have MyAudio 808DCC too. Please can you tell how you are root it. Please a detailed description of the procedure, because I am beginner.
Thank You
darko150 said:
I have MyAudio 808DCC too. Please can you tell how you are root it. Please a detailed description of the procedure, because I am beginner.
Thank You
Click to expand...
Click to collapse
If you have 4.0.4 ROM the simplest way is to use the attched 870s2-root.zip file (it is for Mediacom 870S2 which is a rebranded Gadmei):
1. Copy 870s2-root.zip on the root of your SD card (DO NOT extract, just copy)
2. Insert SD in your tablet then boot up by pressing Volume UP + power buttons to enter recovery
3. Wait until the recovery menu appear, then using Volume-Up and Volume-Down buttons to scroll the menu and power to enter, select "install patch from SD card" or something like that
4. You will see files list on SD card, again using volume and power buttons, select 870s2-root.zip file
5. Patch will be applied in few seconds
6. Now select "reboot" item.
Now your tablet is rooted but you need super user tool to take advantage of that.
Go to Play Store and search for "Superuser" or "SuperSu" or other tools like them, install it and you'll have a fully rooted gear.
cyrux75 said:
If you have 4.0.4 ROM the simplest way is to use the attched 870s2-root.zip file (it is for Mediacom 870S2 which is a rebranded Gadmei):
1. Copy 870s2-root.zip on the root of your SD card (DO NOT extract, just copy)
2. Insert SD in your tablet then boot up by pressing Volume UP + power buttons to enter recovery
3. Wait until the recovery menu appear, then using Volume-Up and Volume-Down buttons to scroll the menu and power to enter, select "install patch from SD card" or something like that
4. You will see files list on SD card, again using volume and power buttons, select 870s2-root.zip file
5. Patch will be applied in few seconds
6. Now select "reboot" item.
Now your tablet is rooted but you need super user tool to take advantage of that.
Go to Play Store and search for "Superuser" or "SuperSu" or other tools like them, install it and you'll have a fully rooted gear.
Click to expand...
Click to collapse
Thank You very much. Instructions encouraged me, so I rooted with "hewuqiku.zip" by the same system. Now is rooted, no problem, everything works well. I can install app that require root.
Regards, Darko150
First post so be gentle.
My Gedmei E8-hd was a bit of an impulse purchase, and it would appear from what I have researched that this may have been a mistake.
My main issue is not being able to maintain a stable wifi connection, which is obviously a major requirement for any tablet. Although, I have read devices being bricked with certain hardware/firmware combinations I have given both the latest official and the rooted version above a go. My problem is I get to the menu, choose update from sd card option, choose the file, but shortly after the update fails to run and Mr Android falls over.
Has anybody had this issue or know a reason why this would occur. In any event, would the firmware make any difference to the wifi issue?
The battery icon on my E8hd has become permanently stuck at 100%, is there a way to refresh it or clear the battery stats?
Also I see there is a newer 1128 ROM out (im on 1026). The method of instalation seems a bit strange to me. What is step 1 for?
升级方法：
（1）首先用一张TF卡来制作启动卡。启动卡制作方式 Link removed
（2）再将下载的固件包减压，将减压后的文件放到TF卡的根目录，把卡插入你的平板电脑。
（3）关掉平板（MID）后，先按住音量“+”键或者“-”键不放手，再长按“电源键”开机，等到出现“GADMEI"LOGO时，再放开POWER键大概几秒后再放开“+”键或者“-”键，系统将自动进入升级模式，升级完成后会自动重启。
Google translation
Upgrade method:
(1) First, to make a boot with a TF card card. Start card making: link removed
(2) and then download the firmware package decompression after decompression of files into the root directory of the TF card, insert the card into your Tablet PC.
(3) turn off the tablet (MID), first press and hold the volume "+" key or the "-" key is not to let go, and then long press the power button to boot, until "GADMEI" LOGO appears, then release the POWER button probably a few seconds and then release the "+" key or the "-" key, the system will automatically enter the upgrade mode will automatically reboot after the upgrade is complete.
Thanks
Mark.
---------- Post added at 03:32 PM ---------- Previous post was at 03:24 PM ----------
bakerpr said:
First post so be gentle.
My Gedmei E8-hd was a bit of an impulse purchase, and it would appear from what I have researched that this may have been a mistake.
My main issue is not being able to maintain a stable wifi connection, which is obviously a major requirement for any tablet. Although, I have read devices being bricked with certain hardware/firmware combinations I have given both the latest official and the rooted version above a go. My problem is I get to the menu, choose update from sd card option, choose the file, but shortly after the update fails to run and Mr Android falls over.
Has anybody had this issue or know a reason why this would occur. In any event, would the firmware make any difference to the wifi issue?
Click to expand...
Click to collapse
I would agree that the wifi isnt that good, its not that bad either. If you are using WEP encryption then you stand no chance of getting a good wifi signal. If you have the choice then go with a WPA2psk encryption, it works so much better with the E8.
Im not 100% sure about the firmware affecting the wifi but I would say it does (correct me if im wrong), on my ZTE blade the wifi was quite bad with the stock Orange rom but its really good with just about any developers ROM.
As for the E8 i dont know if either of the updated roms from Gadmei have any wifi fixes/improvements included in them.
kram81 said:
The battery icon on my E8hd has become permanently stuck at 100%, is there a way to refresh it or clear the battery stats?
Also I see there is a newer 1128 ROM out (im on 1026). The method of instalation seems a bit strange to me. What is step 1 for?
升级方法：
（1）首先用一张TF卡来制作启动卡。启动卡制作方式 Link removed
（2）再将下载的固件包减压，将减压后的文件放到TF卡的根目录，把卡插入你的平板电脑。
（3）关掉平板（MID）后，先按住音量“+”键或者“-”键不放手，再长按“电源键”开机，等到出现“GADMEI"LOGO时，再放开POWER键大概几秒后再放开“+”键或者“-”键，系统将自动进入升级模式，升级完成后会自动重启。
Google translation
Upgrade method:
(1) First, to make a boot with a TF card card. Start card making: link removed
(2) and then download the firmware package decompression after decompression of files into the root directory of the TF card, insert the card into your Tablet PC.
(3) turn off the tablet (MID), first press and hold the volume "+" key or the "-" key is not to let go, and then long press the power button to boot, until "GADMEI" LOGO appears, then release the POWER button probably a few seconds and then release the "+" key or the "-" key, the system will automatically enter the upgrade mode will automatically reboot after the upgrade is complete.
Thanks
Mark.
---------- Post added at 03:32 PM ---------- Previous post was at 03:24 PM ----------
I would agree that the wifi isnt that good, its not that bad either. If you are using WEP encryption then you stand no chance of getting a good wifi signal. If you have the choice then go with a WPA2psk encryption, it works so much better with the E8.
Im not 100% sure about the firmware affecting the wifi but I would say it does (correct me if im wrong), on my ZTE blade the wifi was quite bad with the stock Orange rom but its really good with just about any developers ROM.
As for the E8 i dont know if either of the updated roms from Gadmei have any wifi fixes/improvements included in them.
Click to expand...
Click to collapse
I did try to decompress the zip file but will try again and see if it works this time.
I downloaded that File in step 1 and read the word doc in there, as far as I can tell it seems to be formating the sd card as FAT32, whats the point of this as my card is allready FAT32, or is this step doing something else?
It seems a really strange thing to be doing when to install the last 1026 or whatever you just had to copy the rom zip to the sdcard like I do with my ZTE balde and install from there.
Has anyone installed 1128? how did you do it?
I installed ROM 1128 and it was a very simple job:
1. Download ROM file from the link i reported in previous post http://forum.xda-developers.com/showpost.php?p=35722947&postcount=12
2. Extract files to SD; no folder, following files should be present on SD root: aml_autoscript, factory_update_param.aml, g11refE8-ota-eng.bestidear.zip, patch_gadmei_e8t3cn.zip, u-boot.bin, uImage, uImage_recovery.
3. Reboot in recovery mode and installation will go on automatically
After installation completed, you should root your device again; you can do it with simple procedure I reported here: http://forum.xda-developers.com/showpost.php?p=35936767&postcount=14
My friend received some time ago a new tablet GoClever Orion 101. In last days it began to have problems. First disappeared bottom bar with navigation buttons and then after many restarts and factory resets it remained stuck on boot logo. That's when I received it.
First of all I tried to get into fastboot or recovery. Nothing worked so I googled some time and found out that there is a special procedure for flashing .img files.For flashing is used tool named PhoenixSuit or LiveSuit. So after long searching I found some ROMs for other devices with same chipset and even one for my device (probably stock, don't know). But only 2 of them worked. First is this http://dorkfiles.com/ampe-nova-a31-quad-core-black-edition-rom/ I successfully flashed it, booted it and that's where I stayed. Touchscreen is not working. It is because of missing driver for display. Second ROM is just pure black screen. I can turn display on and off with power button but that's all. USB debugging is not working, touchscreen neither, no custom recovery...
Could someone help me with my problem providing me with some valuable help? I really don't know where to go from this stage. Thank you very much.
EDIT: Managed to get ADB working. Still need help.
Anyone?
I can you provide driver from original Rom. I have Bmorn K12 tablet with same specification. But you must me tell, where can I it find?
On Russian forum I found my firmware, you can try it flash per phoenix. Here is link to forum and there is link for download - in 5th post. I can't speak well Russian, but very thanks him!!!
link for download dfiles.ru/files/dky0echl7
But after flash camera not work
firmware not 100% compatible
Hehe... i got this tablet to now like 2 weeks maybe ^^
first day: run great, after some time i get unable to use stock launcher. [fixed by 2 factoty restarst and 1 rom cache delete, after that i buyed Nova prime! runs better +more stuff like add or remove pages and much more..]
second day: all fine when sutten, i pressed on task killer to kill apps.. and then i got my speaker blow up, yeh i now wtf... didnt volume up or down i think it was like 60% volume.. [for this one i was rly mad.. :c but i remeber that ther is way to fix this by removing one speaker just cut one cable.. or add any other speaker like strong one non brakeable like nokia speaker.. sometime plastic must be removed, or just use one speaker]
3 day: i was rly wtf to now... but meeh im using expensive and rly good earphones
4 day: im lucky that it can run mw, gta vc, and other great games easly! +it was so cheap at my local store :] +it got keyboard with it..
...today: i just now purached 32gb class 10 30mbs, becouse its already full with all thos games :3
(about your problem hmm, why didnt you just use other launcher )
(more about my tablet, well it was last tablet.. it was in window, but it was rly cheap +wasnt able to exchange becouse last and didnt want to wait to send to repair shop and wait 1-2 months.. im happy that i know some ppl got more problems than me >.< DATS Racist!)
Hello, today I was upgrading OS to Beta Android 4.2 (trial version) from Goclever official site. I think upgrade was succesfull, all re instaled apps was working. I turned my tablet Off, and after 90 minutes I was trying to turn it On again, but there is no reaction for Power button, or Reset button. Tablet looks like dead. Any idea? Thanks for any help. I'm sorry for my poor english.
-----
Solved! Tablet with Android 4.2 will not start if there is a memory card. Before turning on or reboot takes out a MicroSD Card!
locom said:
Hello, today I was upgrading OS to Beta Android 4.2 (trial version) from Goclever official site. I think upgrade was succesfull, all re instaled apps was working. I turned my tablet Off, and after 90 minutes I was trying to turn it On again, but there is no reaction for Power button, or Reset button. Tablet looks like dead. Any idea? Thanks for any help. I'm sorry for my poor english.
-----
Solved! Tablet with Android 4.2 will not start if there is a memory card. Before turning on or reboot takes out a MicroSD Card!
Click to expand...
Click to collapse
What do they mean by trial version? how can the android 4.2 be a trial version? after 30 days they ask you to pay it or what??
Can you guys please send me llink to android 4.2 beta download, because on goclever's official website is only android 4.1 labeled as android 4.2. Please help me. You are mine last chance because goclever is in bankruptcy and their support isn't workin. If you have this file stored in your disk drive please upload it any cloud. PLEASE
EDIT1: Luckily i have found one
https://yadi.sk/d/A3vZxlvEqf7An
Hi All,
Since 3 years I had upgraded my Android 2.1 Flytouch 10.1 Tablet into Flytouch 2.2. #3245 version, without any major problems.
My only problem was that I was not able to use Titanium back up and some other apps unless I was rooted, so after many attempts
I succeeded to root it and to be able to use it. Until the time I decided to upgrade my BusyBox to the latest version. After that I rebooted
my tablet with success but only for once because since then it freezes at start up.
How can I recover my system please.??
Thanks.
AA
altkon said:
Hi All,
Since 3 years I had upgraded my Android 2.1 Flytouch 10.1 Tablet into Flytouch 2.2. #3245 version, without any major problems.
My only problem was that I was not able to use Titanium back up and some other apps unless I was rooted, so after many attempts
I succeeded to root it and to be able to use it. Until the time I decided to upgrade my BusyBox to the latest version. After that I rebooted
my tablet with success but only for once because since then it freezes at start up.
How can I recover my system please.??
Thanks.
AA
Click to expand...
Click to collapse
Flash this in recovery --> UPDATE-SuperSU-v1.93.zip
delete cache/dalvik in recovery
Can you further elaborate as to how I shall do it since I cannot initialize the Recovery Utility on my Tablet.
The only think I can do is I can connect it to my WXP desktop with a male to male USB cable and get it
to be recognized by the WXP.
I would rather prefer to get it to boot from a SD card to update or recover my Tablet.
Sorry for my ignorance as I am only a newbee..
Thanks a lot.
Cant You enter Recovery mode??
Gesendet von meinem One S mit Tapatalk
Sorry but I dont understand your language...
Anyway I would rather prefer a more detailful guideance.
Thanks .
AA
altkon said:
Sorry but I dont understand your language...
Anyway I would rather prefer a more detailful guideance.
Thanks .
AA
Click to expand...
Click to collapse
Because I have tried several times to reset or recover by pressing Power + Home bottons etc
and a notification came that there is " no image " to recover from, would you or someone
else explain to me how to flash it to the old version Android 2.2. #3245 or later.
Thanks a lot.
AA
Adrian Gannon: how stupid is this cant saee what button she is pressing on third................mad!!!!!!!!!!!
John Stancliff: this helped a lot, except my pad won't time out.... it stops at 1 second and freezes. unit shows unable to recover try from SD....that doesn't even work....
Tamás Markó: Thank you!
Gonzalo Martinez: @mrharleydog1 power home center squere
anolane205: I sooooo need some help...i press the three and get the press the required keys screen but as I hold it still boots up.... I downloaded a lock screen application and can't open my tablet maybe cause I have the superpad 3 2.3... did someone tell me please what I'm doing wrong
paulaboyd: @fapobee!! Thanks!!!! I didn't Knew that for Super Pad 3 I have to press menu button instead! It Worked!!!
paul beccio boulds MOT: at first press start ,menu and home buttons together untill reboot comes on
fiatmareaturbo: Hi tryed change language from china to english done some misstake it not start anymoore how to restart android 2.3