Related
WIND WIND.zip for 1.46.1500.3 (WIND users only!)
T-Mobile TMOB.zip for 1.43.531.3 (T-Mobile users only!)
Bullet Proof BP.zip for Bullet Proof ROM
FAQ:
------------------------------------------------------------
Can I flash this via recovery? No, extract the build.prop and push it to system and set to 644
Why do I see no data speed increase? This only unlocks the full HSPA+ performances on the phone, actual speed is still limited to the provider's cellphone tower types
To use this, rename your current build.prop and past the one in the zip to system, change the permissions to 644 and reboot.
Change log: 04/14/2012:
removed hep option (I think this is killing battery, not sure)
added modified Bullet Proof version of build.prop, should be ok for the mail problem
Change log: 04/05/2012:
added T-Mobile version
re-enabled ro.ril.disable.power.collapse
removed the default home operator stuff (did not make a difference)
ro.telephony.default_network set to 2 so the network type setting sticks (only on wind version)
added ro.ril.hep = 1
added ro.kernel.android.checkjni=0
added pm.sleep_mode=1
added windowsmgr.max_events_per_sec=150
added video.accelerate.hw=1
added debug.performance.tuning=1
Change log: 04/03/2012:
Added to default to home operator "WIND Home" and the numeric IDs for gsm and cdma configs
WiFi Scan interval to 300s (save battery)
heapsize to 128MB
debug.composition.type from c2d to gpu (home screen seems to be much smoother)
Tweaked the HSPA configs (I can't see much change, probably because I am far in the boonies)
Enabled "Dual Transfer Mode"
Enabled ro.ril.enable.sdr (unsure what it is, but just testing it)
Post your test results, recommendations etc.
Can you tweak the tmobile one also?
Not sure about wind, but tmobileUS has (the top 4 lines in screenshot),.when edited, increase data speeds... Mine should be edited already, but as I looked at them while uploading, those numbers look stock (may explain my 15 mb/s speed vs my 25 mb/s speed )... I will have to doube check.
Also, any way to edit this to completely kill the capacitive lights so they won't come on after reboot?
Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5
glacierguy said:
Can you tweak the tmobile one also?
Not sure about wind, but tmobileUS has (the top 4 lines in screenshot),.when edited, increase data speeds... Mine should be edited already, but as I looked at them while uploading, those numbers look stock (may explain my 15 mb/s speed vs my 25 mb/s speed )... I will have to doube check.
Also, any way to edit this to completely kill the capacitive lights so they won't come on after reboot?
Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I would prefer to work directly from a stock one (need to source one some how). And no, this will not be able to disable the button lights, you need to do them in the init.post_boot.sh file under etc
Can someone provide a completely unmodified build.prop?
Mine is stock... I verified with the modified build prop faster speeds thread...
http://db.tt/MlsimcFo
Also... That's not stock stock... I haven't edited it, but I am on a Rooted Rom... Idk if NRGZ made any changes in his ROM
Thanks
PS... Here's the thread with some build.prop edit suggestions for faster data speeds. I can confirm it works.
http://forum.xda-developers.com/showthread.php?t=1489046
Build.prop faster data speeds [Solved]
Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5
glacierguy said:
Mine is stock... I verified with the modified build prop faster speeds thread...
http://db.tt/MlsimcFo
Also... That's not stock stock... I haven't edited it, but I am on a Rooted Rom... Idk if NRGZ made any changes in his ROM
Thanks
PS... Here's the thread with some build.prop edit suggestions for faster data speeds. I can confirm it works.
http://forum.xda-developers.com/showthread.php?t=1489046
Build.prop faster data speeds [Solved]
Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Yours is definitely modified, I see that it has custom names in the namespaces at the bottom.
I did put those values in the build prop, but I dont see much changes on my side. then again, it is probably my provider or my location
How are speeds on this?? I usually get awful speeds from WIND in my neighbourhood, wondering if this'll fix that.
Sent from my HTC Amaze 4G using xda premium
rbaruch said:
How are speeds on this?? I usually get awful speeds from WIND in my neighbourhood, wondering if this'll fix that.
Sent from my HTC Amaze 4G using xda premium
Click to expand...
Click to collapse
This only sets to allow maximum speed the HSPA on Amaze 4G can support, so far, I have not seen any improvement, probably won't until WIND rolls out better HSPA or "4G"
morrislee said:
This only sets to allow maximum speed the HSPA on Amaze 4G can support, so far, I have not seen any improvement, probably won't until WIND rolls out better HSPA or "4G"
Click to expand...
Click to collapse
Same here. No change in data speeds at all :|
morrislee said:
I would prefer to work directly from a stock one (need to source one some how). And no, this will not be able to disable the button lights, you need to do them in the init.post_boot.sh file under etc
Can someone provide a completely unmodified build.prop?
Click to expand...
Click to collapse
Stock TMOUS build.prop from 1.43.531.3 OTA...
Code:
ro.ril.oem.ecclist=911
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.gprsclass=10
ro.ril.hsdpa.category=24
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.def.agps.mode=1
ro.ril.fast.dormancy.timeout=10
ro.ril.def.agps.feature=1
ro.ril.radio.svn=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.sdr=0
ro.ril.enable.gea3=0
ro.ril.enable.amr.wideband=0
ro.ril.set.mtusize=1440
ro.ril.rxd.mode.nv=11
ro.ril.bler.threshold.nv=125
ro.ril.rscp.threshold.nv=110
ro.ril.enable.rxd=1
ro.ril.oem.cnap=1
ro.ril.enable.r8fd=1
ro.ril.disable.cpc=1
ro.ril.ims=1
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.am=android-tmobile-us
ro.com.google.clientidbase.vs=android-hms-tmobile-us
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-hms-tmobile-us
ro.ril.vmail.310260=+18056377243
ro.phone.min_match=7
ro.ril.enable.ganlite=0
ro.product.model=HTC_Amaze_4G
ro.ril.def.agps.feature=1
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.customizationid=251013
ro.aa.project=Ruby
ro.aa.romver=1.43.531.3
ro.aa.maincid=T-MOB010
ro.aa.modelid=PH8511000
ro.aa.cidlist=T-MOB010
ro.aa.rid=201
ro.aa.taskid=228638
ro.aa.skulist=531
ro.aa.mainsku=531
ro.com.google.clientidbase=android-htc
ro.aa.customizationid=251013
ro.aa.project=Ruby
ro.aa.romver=1.43.531.3
ro.aa.maincid=T-MOB010
ro.aa.modelid=PH8511000
ro.aa.cidlist=T-MOB010
ro.aa.rid=201
ro.aa.taskid=228638
ro.aa.skulist=531
ro.aa.mainsku=531
ro.com.google.clientidbase=android-htc
ro.build.id=GRJ22
ro.build.display.id=GRJ22
ro.build.version.incremental=192596.3
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.4
ro.build.date=四 12月 1 02:56:31 CST 2011
ro.build.date.utc=1322679391
ro.build.type=user
ro.build.user=root
ro.build.host=ABM035
ro.build.tags=release-keys
ro.product.model=HTC Ruby
ro.product.brand=tmous
ro.product.name=htc_ruby
ro.product.device=ruby
ro.product.board=ruby
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ruby
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.43.531.3 CL192596 release-keys
ro.build.description=1.43.531.3 CL192596 release-keys
ro.build.changelist=192596
ro.product.ua=
ro.build.fingerprint=tmous/htc_ruby/ruby:2.3.4/GRJ22/192596.3:user/release-keys
ro.build.project=Ruby:228638
ro.product.version=1.43.531.3
ro.build.languageremove=0
ro.build.sense.version=3.0
keyguard.no_require_sim=1
# end build properties
#
# system.prop for ruby
#
ro.sf.lcd_density=240
debug.fb.rgb565 = 0
debug.composition.type = c2d
#+HTC_RIL: from QCT Fusion
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
DEVICE_PROVISIONED=1
#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=11
#
# system props for telephony modules
#
#device supports LTE
ro.config.lte=true
#device supports EHRPD
#ro.config.ehrpd=true
#device supports simultaneous 1x voice + LTE
#ro.config.svlte1x=true
#-HTC_RIL: from QCT Fusion
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# pyramid RF team request
ro.ril.enable.dtm = 0
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 3
# Default network type.
# 0 => WCDMA preferred.
ro.telephony.default_network=0
wifi.interface=tiwlan0
wifi.supplicant_scan_interval=15
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
# Change to 32m, due to 2.3.3 GB already change to 32m
dalvik.vm.heapsize=32m
# For the default value of agps
ro.ril.def.agps.mode = 2
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For Pyramid China NEL
ro.ril.enable.prl.recognition = 1
# For emmc phone storage
ro.phone_storage = 0
# For ext4 file system
ro.ext4fs = 1
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
ro.htc.appupdate.url = http://apu-chin.htc.com/check-in/rws/and-app/update
ro.htc.appupdate.url_CN = http://apu-chin.htccomm.com.cn/check-in/rws/and-app/update
ro.htc.appupdate.exmsg.url = http://apu-msg.htc.com/extra-msg/rws/and-app/msg
ro.htc.appupdate.exmsg.url_CN = http://apu-msg.htccomm.com.cn/extra-msg/rws/and-app/msg
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
# For quick boot mode
persist.sys.shutdown.mode = hibernate
# For opensense sdk
ro.htc.common.version = 2.0.0.0
# Following property will be reference by Settings.
ro.product.processor = 1.5 GHz dualcore
ro.product.ram = 1GB
ro.product.display_resolution = 4.3 inch qHD resolution
ro.product.main_camera = 8M
ro.product.front_camera = 2M
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 a/b/g/n
# Properties for supporting framework features
ro.htc.framework.screencapture = true
# support sdcard2
ro.sdcard2 = 1
# Extend key dispatching timeout
keydispatchtimeout = 15000
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.setupwizard.mode=DISABLD
ro.com.google.gmsversion=2.3_r7
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.hac.enable=1
ro.setupwizard.enterprise_mode=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
New version is up and t-mobile one added. Always backup your current one just in case!
yo2boy said:
Same here. No change in data speeds at all :|
Click to expand...
Click to collapse
Prolly depends on your area. My neighborhood has awful service, yet when im in downtown toronto I get fast speeds.
rbaruch said:
Prolly depends on your area. My neighborhood has awful service, yet when im in downtown toronto I get fast speeds.
Click to expand...
Click to collapse
Do you see improvement before and after applying my build.prop in your downtown area? Or has it always been that way?
will the t-mobile one work for simple mobile?
---------- Post added at 10:50 PM ---------- Previous post was at 10:48 PM ----------
morrislee said:
And no, this will not be able to disable the button lights, you need to do them in the init.post_boot.sh file under etc
Click to expand...
Click to collapse
I apologize for thread jacking with this question, but what would you put in this file, I am asking here, rather than via PM because I think others might like to know... you could make a new thread if you prefer... thanks!
edit: ok did a little digging, would this work?
Code:
mount -o rw,remount /dev/block/mmcblk0p29 /system
chmod 777 /sys/devices/platform/leds-pm8058/leds/button-backlight/brightness
echo 0 > /sys/devices/platform/leds-pm8058/leds/button-backlight/brightness
chmod 444 /sys/devices/platform/leds-pm8058/leds/button-backlight/brightness
mount -o ro,remount /dev/block/mmcblk0p29 /system
edit2: confirmed, the above works, just edited the file (init.post_boot.sh) and adb pushed it, then rebooted... nice, no more bleed!
rbaruch said:
Prolly depends on your area. My neighborhood has awful service, yet when im in downtown toronto I get fast speeds.
Click to expand...
Click to collapse
Reception's always been better downtown, probably more/better towers or something
adslee said:
Reception's always been better downtown, probably more/better towers or something
Click to expand...
Click to collapse
Thanks I will try this out.
And for you Wind users, I am on the Energy ROM and I can't send MMS for some reason, keeps failing. Although the other day I did receive one from another Wind user, but missed them from Rogers customers.. My APN for MMS matches exactly what its supposed to be.
benjamminzIS said:
will the t-mobile one work for simple mobile?
Click to expand...
Click to collapse
I think my original question was missed because of the other things I asked [OT] in my post... anyone know the answer?
benjamminzIS said:
I think my original question was missed because of the other things I asked [OT] in my post... anyone know the answer?
Click to expand...
Click to collapse
It should, simple mobile runs on tmobiles network
The t-mobile one works very well for me. I went from a constant 18-20Mb to over 23Mb/s.
djdanska said:
The t-mobile one works very well for me. I went from a constant 18-20Mb to over 23Mb/s.
Click to expand...
Click to collapse
Nice speeds, but usually they are depended on traffic. Don't get your hopes up!
the following is the build.prop from my Motorola electrify(rebadged photon) and it contains many "vzw" things. i know i am roaming off Verizon towers but y so many vzws throughout my build.prop? ...... and OK why i mainly posted this, i am border coverage for us cellular's home network. so i switch back and fourth between Verizon towers(perfect signal) and us cellular(1x and no bars and eventually goes to(no service for about 5 minutes or so)... when it switches to us cellular moist of the time i have to turn phone off and restart in order to regain service(verizon). can anyone help? our do i need to be modding something besides build. prop?
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=4.5.1A_SUN_USC_19.0
ro.build.display.id=4.5.1A_SUN_USC_19.0
ro.build.version.incremental=19
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=Tue Oct 25 15:40:55 CDT 2011
ro.build.date.utc=1319575255
ro.build.type=user
ro.build.user=xjm467
ro.build.host=il93lnxdroid64
ro.build.tags=release-keys
ro.product.model=Motorola Electrify
ro.product.model.number=MB853
ro.product.brand=MOTO
ro.product.name=uscc_us
ro.product.device=sunfire
ro.product.board=sunfire
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=uscc_us
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sunfire-user 2.3.5 4.5.1A_SUN_USC_19.0 19 release-keys
ro.build.fingerprint=MOTO/uscc_us/sunfire:2.3.5/4.5.1A_SUN_USC_19.0/19:user/release-keys
# end build properties
# CDMA RIL ----------------------
persist.ril.uart.flowctrl=1-1000
persist.ril.mux.ttydevice=/dev/ttyHS3
#IKXETNA-176: Increased number of mux channels to include M2M.
persist.ril.mux.noofchannels=10
persist.ril.modem.ttydevice=/dev/ttySPI0
persist.ril.modem.mode=1
persist.ril.features=0x0C
#Commenting out the rild path here. Check sunfire.mk
# Comment the following line for use with Multimode or LTE RIL
# rild.libpath=/system/lib/libmoto_ril.so
# End of CDMA RIL --------------
# LTE RIL ----------------------
# Comment the following line for use with Multimode or CDMA RIL
# rild.libpath=/system/lib/lib-mot-lte-ril.so
# End of LTE RIL ---------------
# Multimode RIL ----------------
lte_ril.libpath=/system/lib/lib-mot-lte-ril.so
cdma_ril.libpath=/system/lib/libmoto_ril.so
ril.rat=LTE
# Comment the following line for use with CDMA or LTE RIL
# rild.libpath=/system/lib/moto-ril-multimode.so
# End of Multimode RIL ---------
ro.hdmi.mirror.enable=false
ro.hdmi.default.app=
hw.overlay.path.config=
ro.mot.ril.danlist=611,*611,#611
persist.ril.ecclist=911,*911,#911
# This defines the max event window manager can
# handle in 1 s. We may adjust this # for performance
# reason later
windowsmgr.max_events_per_sec=70
# for larger screen support
# 4.3" WVGA == 216dpi
# 4.3" qHD == 256dpi
ro.sf.lcd_density=240
dalvik.vm.heapsize=42m
# required for UDD backup tcmd
ro.mot.hw.calibratedImager=1
# ro.cdma.homesystem:
# List of the icon indexes for Enhanced Roaming Indicator.
ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
# Default network type.
# 4 => CDMA / EVDO.
ro.telephony.default_network=4
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.config.vc_call_vol_steps=7
# Default data roaming
ro.com.android.dataroaming=true
# Feature 33857 support DualMode switch, UMTS/CDMA
# This does not apply to Etna as it is not a Global phone.
# IKXETNA-337 turned off this flag.
# Enabling the flag for sunfire.
ro.mot.FTR.33857=true
# without this property, the lock screen would take global phone as UMTS
# block user to operate before setup
keyguard.no_require_sim = true
# set phone mode for lte sim ui
#ro.mot.phonemode.vzw4gphone=1
# This is necessary for framework to support
# the LTE and eHRPD capability.
#ro.mot.lte_on_cdma=1
ro.cdma.home.operator.numeric=311220
ro.cdma.home.operator.alpha=U.S. Cellular
# This prop is requested by U.S. Cellular
cdma.operator.numeric=311220
# Indicate carrier OTA SP number schema
# refer to frameworks/base/telephony/java/com/android/
# internal/telephony/cdma/CDMAPhone.java for the schema:
ro.cdma.otaspnumschema=SELC,1,80,99
# BEGIN Motorola, a20763, 1-Dec-2010, IKMAIN-7617
# write cdma MIN to property for VVM use in GSM/UMTS mode
persist.radio.cdma.min = 0
# true Horizontal VVM is preloaded, not allow to install standalone version of
# VVM from Android Market
# false Horizontal VVM is not preloaded
ro.HorizontalVVM=true
# END IKMAIN-7617
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# The URL for safety information
ro.url.safetylegal=http://www.motorola.com/staticfiles/Support/legal
# our HTML browser (not WAP browser ) does not need to specify UAProf URL
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/motomb853/Profile/motomb853.rdf
# Enable HAC to also display Call Setting Menu Option.
ro.mot.hw.HAC=1
# Motorola, a19622, 12/28/2009, IKSHADOW-204 / Location Settings for android
# Property to set enabling state of the location privacy setting feature.
# Motorola, a19622, 03/16/2010, IKSHADOW-2141 / Disable feature 33067
#ro.mot.settings.locprivacy=1
# ERI feature
# 0 OFF
# 1 ON
ro.mot.eri=0
# Motorol,a6889c,02/Feb/2010,IKSHADOW-619
# Proximity Sensor feature
# 0 disable
# 1 enable
persist.mot.proximity.touch=1
# BEGIN Motorola, a22976, 25-Feb-2010, IKSHADOW-702, FID 31841
# VZW Requirement Specifications: NETWORK BASED PLUS CODE DIALING
# 0 disable
# 1 enable
ro.cdma.nbpcd=1
#Proximity sensor debounce time
mot.proximity.delay=450
# disable touch below 60 pixels
mot.proximity.distance=60
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
# BEGIN Motorola, nfjb73 23-jun-2010, IKMAIN-624
# this is for feature 33860, when phone is activated, the cdma mdn is written.
persist.radio.vzw.cdma.mdn=
# END Motorola, nfjb73
# BEGIN Motorola, e50202, 3-Sept-2010, IKSTABLETWO-7041, default Mobile Hotspot is on
ro.mot.mynet=true
# END IKSTABLETWO-7041
# BEGIN Motorola, a22976, 20-Oct-2010, IKSTABLETWOV-3218
cdma.nbpcd.supported=false
# END IKSTABLETWOV-3218
# BEGIN Motorola, a23250, 08-Nov-2010, IKMAIN-7258
ro.mot.bindervm.config = 153
# END IKMAIN-7258
# For docked touchpad keyboard map
android.keylayout.evfwd=/system/usr/keylayout/evfwd.kl
android.keychar.evfwd=/system/usr/keychars/evfwd.kcm.bin
# BEGIN Motorola, 19Mar2011, vcnw83, IKSUNFIRE-423
slate.keyevent=false
slate.penevent=false
# END Motorola, 19Mar2011, vcnw83, IKSUNFIRE-423
# USB modes allowed for UI and switching
ro.ngp_available=1
ro.modem_available=0
persist.mot.usb.mediasync = 1
# Motorola, IKHALFMWK-3, w001091
# Feature 32711, deep sleep mode support
ro.mot.deep.sleep.supported=true
# BEGIN Motorola, 3/23/2011, a21739, IKSUNFIRE-465
ro.mot.phonemode.numsignalbars=6
# END IKSUNFRE-465
#BEGIN Motorola, 4/21/2011, gqkp64, IKSUNFIRE-716
# turn it on since sunfire is a global phone
# this is for feature 34386, other features for vzw global phone
# could use this property too. IKMAIN-732
#1 this is verizon wireless globle phone
#0 this is not verizon wireless globle phone
ro.mot.phonemode.vzwglobalphone=1
# END IKSUNFIRE-716
#Feature 33889 start program menu at initial bootup
ro.mot.fid.33889.pgm=0
#Default Timezone
persist.sys.timezone=America/New_York
#
# ADDITIONAL_BUILD_PROPERTIES
#
rild.libpath=/system/lib/libmoto_ril.so
persist.ril.mux.retries=500
persist.ril.mux.sleep=2
ro.kernel.android.ril=yes
ro.config.notification_sound=U.S.Cellular.ogg
ro.config.ringtone=U.S.Cellular.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.default_usb_mode=0
ro.media.enc.aud.fileformat=qcp
ro.media.enc.aud.codec=qcelp
ro.media.enc.aud.bps=13300
ro.media.enc.aud.ch=1
ro.media.enc.aud.hz=8000
ro.com.google.gmsversion=2.3_r7
ro.config.sync=no
ro.browser.useragent=0
ro.config.sync=no
ro.media.camcorder.720p=mp4,h264,30,12000000,aac,128000,44100,2
ro.media.camcorder.1080p=mp4,h264,24,15000000,aac,128000,44100,2
ro.media.camcorder.d1NTSC=mp4,h264,30,6000000,aac,128000,44100,2
ro.media.camcorder.vga=mp4,h264,30,4000000,aac,128000,44100,2
ro.media.camcorder.cif=mp4,h264,30,1500000,aac,128000,44100,2
ro.media.camcorder.qvga=mp4,m4v,15,225000,amrnb,12200,8000,1
ro.media.camcorder.mms=3gp,h264,15,128000,amrnb,12200,8000,1
ro.media.camcorder.mmsres=qvga
ro.camcorder.zoom=true
ro.media.capture.shuttertone=0
ro.telephony.call_ring.multiple=false
ro.telephony.call_ring.delay=3000
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.am=android-motorola
ro.com.google.clientidbase.ms=android-uscellular-us
ro.com.google.clientidbase.yt=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.cdma.data_retry_config=default_randomization=2000,0,0,120000,180000,540000,960000
ro.mot.setuptype=2
ro.media.camera.focal=3378.6,3378.6
ro.media.camera.principal=1632.0,1224.0
ro.media.camera.skew=0.0
ro.media.camera.distortion=0.0,0.0,0.0,0.0,0.0
ro.media.camera.calresolution=3264,2448
ro.mot.internalsdcard=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.mot.dpmext=true
ro.com.google.clientid=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/MotoMB200/profile/MotoMB200.rdf
ro.build.version.full=Blur_Version.45.1.190.MB853.USC.en.US
ro.mot.hidden_keyboards=evfwd
# SuperCharger Installation Marker.
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=6
# V6 SuperCharger, OOM Grouping & Priority Fixes created by zeppelinrox.
# SuperMinFree Calculator & MFK Calculator (for min_free_kbytes) created by zeppelinrox also ;^]
#
# See http://goo.gl/krtf9 - Linux Memory Consumption - Nice article!
# See http://goo.gl/hFdNO - Memory and SuperCharging Overview ...or... "Why `Free RAM` Is NOT Wasted RAM!"
# See http://goo.gl/4w0ba - MFK Calculator Info - explanation for vm.min_free_kbytes.
#
# DO NOT DELETE COMMENTS. DELETING COMMENTS WILL BREAK UNINSTALL ROUTINE!
#
# BEGIN OOM_MEM_Settings
ro.FOREGROUND_APP_MEM=2048
ro.VISIBLE_APP_MEM=4096
ro.PERCEPTIBLE_APP_MEM=1024
ro.HEAVY_WEIGHT_APP_MEM=41728
ro.SECONDARY_SERVER_MEM=41728
ro.BACKUP_APP_MEM=45824
ro.HOME_APP_MEM=1024
ro.HIDDEN_APP_MEM=45824
ro.EMPTY_APP_MEM=54272
# END OOM_MEM_Settings
# BEGIN OOM_ADJ_Settings
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=6
ro.BACKUP_APP_ADJ=7
ro.HOME_APP_ADJ=1
ro.HIDDEN_APP_MIN_ADJ=9
ro.EMPTY_APP_ADJ=15
# END OOM_ADJ_Settings
# Miscellaneous Tweaks!
persist.sys.purgeable_assets=1
wifi.supplicant_scan_interval=180
windowsmgr.max_events_per_sec=200
pm.sleep_mode=1
# 3G TurboCharger Enhancment!
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.tcp.buffersize.default=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.wifi=262144,524288,1048576,262144,524288,1048576
net.tcp.buffersize.lte=262144,524288,1048576,262144,524288,1048576
net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.umts=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
net.tcp.buffersize.gprs=6144,8760,11680,6144,8760,11680
net.tcp.buffersize.edge=6144,26280,35040,6144,16384,35040
# End of V6 SuperCharged Entries.
Sent from my Motorola Electrify using XDA
From what I know the build prop has nothing to do with selection of networks. It's the PRL (preferred roaming list) that tells the phone what networks to go on to. Currently forced roaming does not work for the electrify so basically there's nothing you can do unless you modify or change your PRL.
Sent from my MB853 using XDA
OK.. .... so what's the prl four Verizon?
Sent from my Motorola Electrify using XDA
If your rooted get Roam Control ,
Google it.
Sent from my MB855 using xda premium
rbeavers said:
If your rooted get Roam Control ,
Google it.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
sweet til i saw it costs money:/........
Sent from my Motorola Electrify using XDA
I have a generic Amlogic S802 (MXIII) device that I feed to my Viewsonic Pro8200 projector. I have a display issue, and I know the general principle of fixing it, but I can't seem to find a way to do it in Android.
The problem:
My black levels are crushed, or rather they are completely destroyed. To get an idea of what I see on my projector, I can only see the last 3 boxes (out of 20 boxes) shown when you follow the link (can't post link): Google "lagom black level" and it should be the first result.
This makes watching most of my favorite TV content and movies a miserable experience (e.g., Walking Dead, Game of Thrones).
The solution on a different OS:
I previously had this problem with my projector when I had a Windows-based HTPC connected. I fixed it by changing the video pixel format setting to RGB full in Catalyst. It had been set to RGB limited by default, and that was causing my blacks to be crushed (#racismnotdead).
What can I do in Android?
I have gone through the media box settings and Android settings and have found no option to adjust the way HDMI is outputted. Is there a conf or prop file I can edit to force RGB full? Is there any other way to tweak HDMI output settings. Does a custom ROM exist with these options that will work on my generic Amlogic S802 device?
I have been digging through threads on this site and other forums, and I have not found any describing a similar problem. Maybe there aren't many people with really cheap projectors.
My current build.prop file
These are my current build.prop settings:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.20150116 test-keys
ro.build.version.incremental=20150116
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Fri Jan 16 14:25:51 CST 2015
ro.build.date.utc=1421389551
ro.build.type=user
ro.build.user=lhh
ro.build.host=ubuntu
ro.build.tags=test-keys
ro.product.model=MXIII
ro.product.brand=MBX
ro.product.name=k200
ro.product.device=MXIII
ro.product.board=k200
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=MBX
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=11
ro.board.platform=meson8
# ro.build.product is obsolete; use ro.product.device
ro.build.product=k200
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=k200-user 4.4.2 KOT49H 20150116 test-keys
ro.build.fingerprint=MBX/k200/k200:4.4.2/KOT49H/20150116:user/test-keys
ro.build.characteristics=mbx
# end build properties
#
# from device/amlogic/k200/system.prop
#
ro.adb.secure=1
#rild.libpath=/system/lib/libreference-ril.so
#rild.libargs=-d /dev/ttyS0
#ro.sf.lcd_density=240
keyguard.no_require_sim=1
mbx.timeout.enable=false
sys.screensaver.enable=true
ro.statusbar.widget=false
ro.statusbar.button=false
ro.statusbar.yearmonthdayweek=false
#wifi.interface=ra0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
#wifi.supplicant_scan_interval = 60
#alsa.mixer.playback.master=DAC2 Analog
#alsa.mixer.capture.master=Analog
hwui.render_dirty_regions=false
# Configure features
hw.nopm=true
hw.nobattery=true
hw.nophone=true
hw.novibrate=true
hw.nogps=true
hw.cameras=0
hw.hasethernet=true
hw.hasusbcamera=true
hw.has.accelerometer=true
#used in packages/apps/Settings/.../Utils.java
hw.has.bluetooth=false
ro.ethernet.default_on=true
ro.config.low_ram=false
media.amplayer.low_ram=true
#dalvik.vm.jit.codecachesize=0
ro.platform.support.dtsmulasset=true
ro.platform.support.dtstrans=true
ro.platform.support.dts=true
ro.platform.support.dolby=true
ro.screen.has.timeout=false
ro.screen.has.brightness=false
ro.screen.has.tvout=true
ro.platform.has.security=false
ro.platform.has.tts=false
ro.platform.has.touch=false
ro.platform.has.mbxuimode=true
#ro.platform.has.1080scale=2
#ro.fontScale=1.3
ro.platform.has.digitaudio=true
ro.platform.has.defaulttvfreq=false
ro.hw.ethernet.onboard=true
ro.platform.has.cvbsmode=false
ro.platform.hdmionly=true
ro.platform.has.cecmode=false
# Use OSD2 mouse patch
#ro.ui.cursor=osd2
#ro.ui.cursor.autohide=true
#ro.ui.cursor.timeout=10000
ro.ui.cursor=surface
#set to 0 temporarily so touch works without other changes
ro.sf.hwrotation=0
ro.hardware=amlogic
#camera 720p
ro.camera.preview.MaxSize=1280x720
ro.camera.preview.LimitedRate=1280x720x30,640x480x30,320x240x28
ro.camera.preview.UseMJPEG=1
# Enable 32-bit OSD
sys.fb.bits=32
# Disable GPS
gps.enable=false
#keep landscape in launcher
sys.keeplauncher.landcape=true
#Enable player buildin
media.amsuperplayer.enable=true
media.amplayer.enable-acodecs=ac3,eac3,rm,flac,dts,thd
media.amplayer.enable=true
media.amplayer.support-exname=divx,h264,avi,ts,m2ts,mkv,mp4,mpg,mpeg,rm,rmvb,wmv,ts,dat,vob,vc1
media.amplayer.support-exname1=mp2,mp3,ac3
media.amsuperplayer.m4aplayer=STAGEFRIGHT_PLAYER
media.amsuperplayer.defplayer=PV_PLAYER
media.amplayer.thumbnail=true
media.amplayer.startmode=true
#media.p2pplay.enable=true
media.amplayer.widevineenable=false
media.amplayer.dsource4local=1
media.arm.audio.decoder=ape,flac,dts,ac3,eac3,wma,wmapro,mp3,aac,vorbis,raac,cook,amr,pcm,adpcm,aac_latm,rm,alac
media.wfd.use-pcm-audio=true
media.wfd.videoreolutiontype=0
media.wfd.videoreolutiongroup=5
media.wfd.videoframerate=20
media.html5videowin.enable=1
media.decoder.vfm.defmap=decoder ppmgr deinterlace amvideo
media.amplayer.seekkeyframe=1
mbx.3D_Bright.enable=false
# Nand write need force sync when gadget
gadget.nand.force_sync=true
# Camera exif
ro.camera.exif.make=M8
ro.camera.exif.model=k200
#hide status bar
#zgq modify true->false show status bar
persist.sys.hideStatusBar=true
#support media poll uevent,can use sd cardread on usb port
has.media.poll=true
#used forward seek for libplayer
media.libplayer.seek.fwdsearch=1
######## UBOOTENV VARIBLES - r/w as system properties ##########
#
# Now we can load ubootenv varibles to system properties.
# We use a special prefix ("ubootenv.var" as default) to indicate that the 'property'
# actually is an ubootenv varible.
#
# A ubootenv 'property' will be initialized during system booting. And when user set
# a different value, it will be written back to ubootenv device immediately.
#
## prefix of ubootenv varibles - should less than 16 chars.
#UBOOTENV MTD NAME
#ubootenv.var.bootcmd=
#ubootenv.var.cpuclock=
#ubootenv.var.gpuclock=
#ubootenv.var.memsize=
#ubootenv.var.ethaddr=
#ubootenv.var.ipaddr=
#ubootenv.var.gatewayip=
ubootenv.var.outputmode=
#ubootenv.var.screenratio=
#ubootenv.var.oobeflag=
ubootenv.var.480poutputx=
ubootenv.var.480poutputy=
ubootenv.var.480poutputwidth=
ubootenv.var.480poutputheight=
ubootenv.var.480ioutputx=
ubootenv.var.480ioutputy=
ubootenv.var.480ioutputwidth=
ubootenv.var.480ioutputheight=
ubootenv.var.576poutputx=
ubootenv.var.576poutputy=
ubootenv.var.576poutputwidth=
ubootenv.var.576poutputheight=
ubootenv.var.576ioutputx=
ubootenv.var.576ioutputy=
ubootenv.var.576ioutputwidth=
ubootenv.var.576ioutputheight=
ubootenv.var.720poutputx=
ubootenv.var.720poutputy=
ubootenv.var.720poutputwidth=
ubootenv.var.720poutputheight=
ubootenv.var.1080poutputx=
ubootenv.var.1080poutputy=
ubootenv.var.1080poutputwidth=
ubootenv.var.1080poutputheight=
ubootenv.var.1080ioutputx=
ubootenv.var.1080ioutputy=
ubootenv.var.1080ioutputwidth=
ubootenv.var.1080ioutputheight=
ubootenv.var.4k2k24hz_x=
ubootenv.var.4k2k24hz_y=
ubootenv.var.4k2k24hz_width=
ubootenv.var.4k2k24hz_height=
ubootenv.var.4k2k25hz_x=
ubootenv.var.4k2k25hz_y=
ubootenv.var.4k2k25hz_width=
ubootenv.var.4k2k25hz_height=
ubootenv.var.4k2k30hz_x=
ubootenv.var.4k2k30hz_y=
ubootenv.var.4k2k30hz_width=
ubootenv.var.4k2k30hz_height=
ubootenv.var.4k2ksmpte_x=
ubootenv.var.4k2ksmpte_y=
ubootenv.var.4k2ksmpte_width=
ubootenv.var.4k2ksmpte_height=
ubootenv.var.digitaudiooutput=
ubootenv.var.defaulttvfrequency=
ubootenv.var.has.accelerometer=
ubootenv.var.cecconfig=
ubootenv.var.cvbsmode=
ubootenv.var.hdmimode=
ubootenv.var.disp.fromleft=
#Configure the dtv standard, can only be DVB,ATSC
dtv.standard=DVBS
# Disable preload-class
ro.amlogic.no.preloadclass=1
virtualsd.enable=true
#service.adb.tcp.port=5555
const.window.w=1920
const.window.h=1080
sys.defaultStream.ismusic=true
ro.app.optimization=true
ro.platform.has.realoutputmode=true
#add livhls,libcurl as default hls
media.libplayer.curlenable=true
media.libplayer.modules=vhls_mod,dash_mod,curl_mod
#sofrware demux
libplayer.netts.recalcpts=1
libplayer.livets.softdemux=1
#libplayer.netts.softdemux=0
#media.libplayer.fastswitch=1
#Time Zone
persist.sys.timezone=Asia/Shanghai
ro.osd2.size=64x64
#new feature 81282
ro.alarm.align=true
#add for video boot, 1 means use video boot, others not .
service.bootvideo=0
#new feature 81297
ro.permissions.settings=true
#don't need brightness
prop.sp.brightness=off
ro.quickboot.enable=false
#config.disable_telephony=true
#config.disable_bluetooth=true
config.enable_quickboot=true
#config.disable_vibrator=true
#Add 3G
hw.nophone=false
#has spdif output
ro.hdmi.spdif=true
bt.keep_on.enable=true
#vpn link mtu config
ro.vpn_wlan_mtu=1400
ro.vpn_eth_mtu=1400
ro.vpn_ppp_mtu=1250
ro.default_wlan_mtu=1500
ro.default_eth_mtu=1500
#netxeon add begin
ro.statusbar.screenshot=true
ro.statusbar.volume=true
persist.sys.dBluetooth=true
#netxeon add end
#
# ADDITIONAL_BUILD_PROPERTIES
#
ds1.audio.multichannel.support=false
ds1.audio.effect.support=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.config.alarm_alert=Alarm_Classic.ogg
sys.amplayer.drop_pcm=1
ubootenv.var.firstboot=2
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=384m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
wifi.interface=wlan0
gps.enable=false
ro.app.optimization=true
drm.service.enable=true
ro.platform.has.pppoe=true
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
More details
I'm honestly not surprised that this has no replies, they'll probably come in months down the road.
Anyways, I have some more details. My projector has three modes related to HDMI color space: Auto, RGB, Ycbcr. Booting the device in each of those modes has no effect on the black levels.
However, I did find something that had an actual affect on the black levels. When I set the HDMI output to 576p 50 Hz or 480p 60 Hz, I could see 14 out of the 20 black level boxes (Nagom LCD calibration website) with daylight creeping in the room. That's fantastic, but the UI and videos look like trash at those resolutions, so it's at best additional information and not even close to a remedy.
I am ready to buy a BenQ projector at Wal-Mart with the intention of returning after a couple of weeks just to give myself a reprieve from this color crushing nightmare of an excuse for a home theater system.
mjmacky said:
I'm honestly not surprised that this has no replies, they'll probably come in months down the road.
Anyways, I have some more details. My projector has three modes related to HDMI color space: Auto, RGB, Ycbcr. Booting the device in each of those modes has no effect on the black levels.
However, I did find something that had an actual affect on the black levels. When I set the HDMI output to 576p 50 Hz or 480p 60 Hz, I could see 14 out of the 20 black level boxes (Nagom LCD calibration website) with daylight creeping in the room. That's fantastic, but the UI and videos look like trash at those resolutions, so it's at best additional information and not even close to a remedy.
I am ready to buy a BenQ projector at Wal-Mart with the intention of returning after a couple of weeks just to give myself a reprieve from this color crushing nightmare of an excuse for a home theater system.
Click to expand...
Click to collapse
I'm going to be using a 808b stick that I have and was wondering about getting the Viewsonic, have you found any solution to this problem?
Edit and create files *****.ini only the program Notepad ++ and put it in the section ENCODING - ENCODE in UTF-8 without BOM !!!!!Installing the Xposed Framework
Download the latest version of the apk file Xposed Installer on your UNIT, and set it by running using any file manager. After installation, start the application Xposed Installer, buyout you will find among other programs in the application bar of your device.
What is Xposed Framework for Android and how to install it on a Unit Xposed Framework for Android and how to install it on your unit
After starting the application, open the item Framework and click on «Install / Update». Do not worry if you find that your application is frozen - it will take some time, and eventually you should see a request for the provision of Super User Xposed Installer root rights, you should give it.
What is Xposed Framework for Android and how to install it on your unit
Then you will see a window in which to display the installation process. After installation, you will need to reboot your tablet or phone, that you can do right from the app by pressing the "reset".
What is Xposed Framework for Android and how to install it on your unit
All installation is complete. By itself, the Xposed Framework does not bear any new functionality to your device. All changes in the system are made by setting the individual modules, which provide you with new opportunities.
Activation of the module Xposed Framework
Once installed, you will be notified that the module is not active. Clicking on it will take you to a section in the application modules Xposed Imstaller. The same can be done through the application itself. Now, in order to activate the module, you must put a tick in front of him. In some cases, you may need to restart. To switch to the module, just click on it.
Xposed-mtc-manager ( author MVG-V70 )
Capabilities:
1. The module functionality moved xposed-mcu, not allowing the radio to go to sleep while scrolling starter.
When you receive a signal to shut down the unit produces a delay of 5 seconds, if at this moment reappears food, nothing happens in the absence of power cassette player goes to sleep.
Because of the implementation of inclusion in our MCU, for the period of voltage loss goes off the screen.
2. The module is implemented whitelist applications that do not allow the system to cover the necessary services and applications in the care to sleep and when you press the "Acceleration" in the curtain. Thus, the module eliminates the need for mtc-wakeup-service.
File exceptions must be on the outside of the map in the catalog mtc-manager. Filename whitelist.ini
The file should list the names of the application packages whitelist.
example
add to the white list MTC-Volume and MapCamDroid:
/external_sd/mtc-manager/whitelist.ini
com.mvgv70.mtcvolume
info.mapcam.droid
The names of packages and services can be taken from the application manifest file or with a program like Package Viewer.
3. Alternative screensaver with a list of exceptions that runs in any (even abnormal appendix). Staff alternative mechanism is activated screensaver.
screensaver
Settings in settings.ini file in the directory mtc-manager on the outside of the map.
settings.ini
Code:
# Including an alternate screen saver, if you specify false mechanism will work full-time:
screenClock=true
# Time off the screen when not set will be used the value of the full-time settings:
screenTimeout=60
# The name of the software package screensaver
screenPackage=com.microntek.screenclock
# Name aktiviti screensaver
screenClass=MainActivity
# If the name of the package and Activiti not specified, will use the standard screensaver
The list of exceptions is in the file ss_exceptions.ini - should list the names of the packages, for example:
ss_exceptions.ini
Code:
com.microntek.music
ru.yandex.yandexmaps
Also, the screensaver does not start when talking on the phone, rear view camera, navigation, and turn off the radio.
If instead of a beautiful clock screensaver MTCSreenClock.apk called conventional digital clock on a black background, it is necessary to make sure that the application is installed MTCScreenClock.
If the application is installed, you can try to set the parameters and screenClass screenPackage in settings.ini
4. Also in the module has a "backup" for the correct adjustment of sound in the MTC-Volume and MTC-Service.
volume adjustment in the firmware to Android 4.4.4
These insertions Chinese programmers take the current when adjusting the volume of the settings are not, but from a local variable that does not change when you change the sound third-party programs - and therefore the sound jumps occur when trying to adjust the sound of regular buttons.
6. Forwarding OBD-device bluetooth.
Device names must be listed in settings.ini file parameter obd_device a comma in the form in which they are visible in normal application speakerphone. You can not specify names, part names, such as:
settings.ini
Code:
obd_device=OBD,DUAL-SPP
7. Install the program list, to switch the MODE,
In settings.ini set
Code:
modeSwitch=true
Programs are switched one after the other.
For correct audio switching, applications should be managed (play / pause) programmatically via Intents. If the player does not support the start and stop of the external intent, the need to manually switch the sound.
Pressing the MODE button is searched in the list of active applications running. Further, the application is sent to the team (configured in mode.ini) to close or To pause the audio stream. Then Activiti runs by default for the next application, and the application sends a command to start the playback (also configurable in mode.ini)
mode.ini
Code:
# a list of selectable applications to be listed package names
[apps]
# original radio
com.microntek.radio
# PowerAmp
com.maxmpz.audioplayer
# music factory
com.microntek.music
# PCRadio
com.maxxt.pcradio
# factory DVD
com.microntek.dvd
# closing the regular application Radio
[com.microntek.radio:stop]
# name of intent
intent=com.microntek.bootcheck
# parameter name
extra=class
# parameter value
value=mode
# closing staffing Music app
[com.microntek.music:stop]
# name of intent
intent=com.microntek.bootcheck
# parameter name
extra=class
# parameter value
value=mode
# closing the regular application DVD
[com.microntek.dvd:stop]
# name of intent
intent=com.microntek.bootcheck
# parameter name
extra=class
# parameter value
value=mode
# including playing in PowerAmp
[com.maxmpz.audioplayer:start]
# service name
service=com.maxmpz.audioplayer.player.PlayerService
# name of intent
intent=com.maxmpz.audioplayer.API_COMMAND
# act: startService
send=service
# parameter name
extra=cmd
# parameter type
extra_type=int
# parameter value
value=3
# off playing in PowerAmp
[com.maxmpz.audioplayer:stop]
# service name
service=com.maxmpz.audioplayer.player.PlayerService
# name of intent
intent=com.maxmpz.audioplayer.API_COMMAND
# act: startService
send=service
# parameter name
extra=cmd
# parameter type
extra_type=int
# parameter value
value=2
# pcradio: start playing
[com.maxxt.pcradio:start]
# action: on behalf of the command root
send=cmd
# command root
command=am startservice -n com.maxxt.pcradio/.service.RadioService -a com.maxxt.radio.ACTION_PLAY_STREAM
# pcradio: stop playing
[com.maxxt.pcradio:stop]
# action: on behalf of the command root
send=cmd
# command root
command=am startservice -n com.maxxt.pcradio/.service.RadioService -a com.maxxt.radio.ACTION_STOP_PLAYBACK
View attachment xposed-mtc-manager-1.8.apk
Xposed-mtc-volume ( author MVG-V70 )
1 Installation of regular player on pause for incoming / outgoing calls;
2 safe volume setting when switched on, based on a preset volume;
3 increase the volume depending on the speed. The steps are adjusted as the adjustment in the mtc-service;
the ability to turn on / off mute by pressing the play / pause;
4 setting the volume level adjustment for each full-time application. When you switch to the application volume will be increased by the amount of compensation, while output decreased. So I decided the problem of insufficient volume applications, "Music" compared to the "Radio";
5 change the screen brightness according to the time of sunrise and sunset. Brightness levels are adjusted. Time of sunrise and sunset is automatically determined with the possibility of correction. The brightness is also adjusted when exiting the Rear Camera and service settings;
6 Navitel clean shutdown when you turn off the radio. Broadcasted intent under which the service Navitel goes reboot.
View attachment mtc-volume-2.6.apk
Xposed-mtc-bt ( author MVG-V70 )
Replacing the standard search the contact name for a phone number in the address book of an incoming / outgoing call.
Search on the following algorithm:
of contact numbers it is released for all symbols except numbers;
taken last 10 characters;
compared with the last 10 characters of the incoming / outgoing number;
in case of success returns the name of the contact.
View attachment xposed-mtc-bt-1.5.apk
Xposed-mtc-radio ( author MVG-V70 )
xposed- module slightly improves the appearance of original radio. The idea was inspired by requests for increasing the number of saved stations
When switched off RDS in Settings - Factory settings - Other - disable RDS, RDS messages is displayed instead of the name of the radio station, which is taken from the configuration file mtc-radio.ini.
Also, the name is displayed on the buttons of your saved stations.
mtc-radio.ini
The file must be on the inside of card catalog mtc-radio. Utf-8 encoding without bom. If there are doubts about bom, leave the first line in the file is empty.
Directories and files you need to create your own module does not create them automatically!
example file
Code:
[Controls]
# Radio show names in the header RDS
title=true
# Radio show short names on the buttons
buttons=true
# Auto search button works on a long press
search=true
# Show pop-up notifications when the app is not active Radio. default false
toast = true
# Font size pop-up notifications
toast.size=22
# to display the names of the stations in the information RDS
[title]
90.80=Relax FM
101.70=Наше Радио
88.30=Ретро FM
# short names for display stations in buttons
[buttons]
90.80=Relax
101.70=Наше
88.30=Ретро
The format is the same frequency as in the show in the appendix.
If the label on the button found a short name in the [buttons], it will take a long name from the section [title]
Warning: Radio appearance of the application does not change! Only shows the name of the radio station, if the full configuration file.
View attachment xposed-mtc-radio-1.7.apk
Xposed-mtc-keys ( author MVG-V70 )
Program that allows action to remap the buttons radio.
It adds the ability to run programs and perform various actions by pressing the buttons on the front panel of the radio.
The configuration file must be a redefinition of the buttons on the inside (/mnt/sdcard or /mnt/ internal_sd depending on the version of Android), or on the outside of the map external_sd directory (folder) mtc-keys and called mtc-keys.ini
Loading a configuration file takes place at the start of the recorder.
At the touch of a button, you can run:
Program
app_xx=package name
xx-button code, the package name, the name of the package installed program.
eg:
app_42=ru.yandex.yandexmaps
is assigned to the DVD program Yandex.maps
If you press when you run the program is already running, it is inactive.
Activiti
activity_xx= the name of the package / class name
xx-button code, the package name, the name of the package installed program, the class name, the full name of the class Activiti.
Activiti have triggered should be set sign exported = "true", or present a list of <intent-filter>.
eg:
action_51=com.estrongs.android.pop / com.estrongs.android.pop.view.FileExplorerActivity
Navi button on the main window is assigned to the call ES-Explorer.
Action
action_xx= action
xx-button code, the effect is one option from the list: home, menu, back, apps, screenshot, sleep.
eg:
action_51=apps
Navi button is assigned to access the list of applications.
Intent
intent_xx= Intent
sending a broadcast Intent.
Management of third-party player
media_xx=play/next/prev
Pressing the standard softkey
keyevent_xx=button code
Full list of possible codes, see. Constants KeyEvent.KEYCODE *
Maybe not all codes will work on our devices.
Launch of shell-command as root
command_xx=command shell
Remapping the button code
event_xx= button code
Visual settings there, so the names of the packages offered and Activiti determined using PackageViewer:
one two Three.
+++++++++++++++++++++++++++++++++++++++++++++++
Code List buttons
2 MODE, switch between regular applications ("Radio", "Music", etc.)
27 VOL-, Decrease Volume
19 VOL +, Increase the volume
4 MUTE, Mute / unmute
23 Calling the configuration modes and sound equalizer
42 DVD, Launch Application "DVD"
43 RADIO, BAND, Running the application "Radio" (second pressing - range switching)
When running the radio
5, 43 - Next Range
88 - On. / Off. TA
87 - On. / Off. AF
77 - Auto without saving (Intro) with increasing frequency since the beginning of the range
62 - Next Channel
61 - Previous channel
22.63 - Search the frequency decreases
24.64 - Search with increasing frequency
29 - Switch to Channel 1
30 - Switch to Channel 2
31 - Switch to Channel 3
32 - Switch to Channel 4
33 - Switch on Channel 5
34 - Switch on channel 6
18 - On. / Off. ST (stereo)
21 - On. / Off. LOC
44 LOUD, Enable / disable LOUDNESS
45 PREV, Previous track, previous tuned radio station, the previous DVD chapter
46 NEXT, next track, the next radio station tuned, the next DVD chapter
58 TUNE DOWN, rollback ago, the search for radio frequency step downwards
59 TUNE UP, Preroll ahead, search for radio frequency step upward
69 BLUETOOTH, Running Applications "Handsfree"
70 HANGUP, Put up the phone and end a call
80 PICKUP, pick up the phone to answer the call
When the application is running "Handsfree"
69 - Go to the dialer
70 - Hang up
80 - Off-hook
3 - Play / Pause music
6,22,45,61 - Previous track / the beginning of the track (music)
14,24,46,62 - next track (music)
13 - Stop (Music)
59 - Preroll (music)
58 - unwinding (music)
38 - Press the digit 0
29 - Press the digit 1
30 - Press the number 2
31 - Press the number 3
32 - Press the number 4
33 - Press the number 5
34 - Press the number 6
35 - Press the number 7
36 - Press the number 8
37 - Press the digit 9
49 EQ, switch between preset equalizer
50 Disable application "Speakerphone" (in fact does not work)
51 GPS, Starting the navigation application
72 AUX, Running Applications "External power" (AV-In)
57 HOME, go to the home screen
73 DTV, Running Applications "Digital TV"
67 (presumably) Run the screen calibration (for resistive screens)
74 SETUP, Run "Settings"
84 MUSIC, Launch Application "Music"
85 Switching between the screen brightness settings
3 PLAYPAUSE, Play / Pause
13 PLAYSTOP, Stop
View attachment xposed-mtc-keys-2.13.apk
Xposed-mtc-music ( author MVG-V70 )
Module xposed-mtc-music, correcting the shortcomings of Chinese programmers and add new features in the staffing Music application.
- Automatic playback begins only when the automatic setting enabled, playback and playlist absence;
- At the start of the module waits to mount the carrier (where it was stopped), and then plays music with the right moment;
- Activate random playback of tracks ;
- Playing the next folder ;
- Return play at a specific time;
- Distribution of information about the currently playing file for music widgets (emulated Google Player);
- Control the media player using the standard commands from third-party widgets.
- Featuring mp3-tag in the modified Annex Music (utf8 encoding tags);
- If there is no title tag takes the file name;
- If there is no tag album folder name is taken;
- Showing the cover of the currently playing file in the directory, if there is a tag with a picture to your mp3-file;
- Hiding frequency visualizer;
- Show a popup notification when switching tracks;
- Display of tags in a modified screensaver
Options normally stored in a file on the gps-map: /external_sd/mtc-music/mtc-music.ini
File and directory you want to create your own.
basic settings
# Внимание! Это файл настройки для модифицированных плееров JY и KGL. На плеерах KLD функция просмотра тэгов с обложкой альбома работать не будет.
# Менять можно только параметры после знака =
# Attention! This is the configuration file for the modified players JY and KGL. On players KLD viewing function tag with album art will not work.
# Change the settings can only be after the = sign
[music]
# Название картинки из папки с музыкой, для отображения в плеере в качестве альбома и проекции на фон
# Name of the images from a folder with music, to display in the player as the album and the projection on the background
album_cover=cover.jpg
# Время перемотки в секундах, назначенное на виртуальные кнопки слева и справа от временной шкалы проигрывания файла. Вперед и назад
# Rewind time in seconds assigned to the virtual buttons on the left and right of the time scale of file playback. Forward and backward
fwdpress.time=20
backpress.time=20
# Настройка всплывающего сообщения о треке в плеере, если он не активен. Разрешение (true или false) и размер шрифта.
# Configure the pop-up messages on the track in the player if it is not active. Resolution (true or false) and font size.
toast=true
toast.size=22
# Формат всплывающего сообщения. Можно использовать %title% %artist% %album% %filename% и %fullfilename%. Можно комбинировать и вставлять свои символы и слова.
# Format pop-up message. You can use the %title% %artist% %album% %filename% and %fullfilename%. You can combine and embed their characters and words.
toast.format=%artist% - %title%
# Желаемый уровень прозрачности проекции обложки альбома на общий фон плеера (в десятых долях от 1). Если пусто, то по-умолчанию будет уровень 0,25. Чтобы убрать проекцию, поставить =0.
# Desired level of transparency of the album cover on the projection of the general background of the player (in tenths of 1). If empty, the default will be the level of 0.25. To remove the projection, put = 0.
background_alpha=
[screenclock]
# Выключение скринсейвера только при касании экрана. true - да, false - штатный режим работы.
# Turn off the screensaver only when you touch the screen. true - yes, false - normal mode of operation.
touch_mode=true
# Выключение скринсейвера при входящем звонке. true - да, false - панель телефона появляется на фоне скринсейвера.
# Turn off the screen saver when an incoming call. true - yes, false - of the phone appears on the background of the screen saver.
bluetooth.close=false
# Цвет информационных строчек скринсейвера. Можно писать =red, =green, =blue, либо в hex-коде =#ffff0000 (см. Googl). Если пусто, то по-умолчанию будет цвет от автора.
# Color information strings screensaver. You can write a = red, = green, = blue, or hex-code = #ffff0000 (see. Googl). If empty, the default will be the color from the author.
color=
# Формат даты скринсейвера, если задать, будет свой, если пусто, то по-умолчанию - EEEE d MMMM yyyy (вторник 2 февраля 2015)
# Format screensaver date, if set, will be your if empty, the default - EEEE d MMMM yyyy (Tuesday February 2, 2015)
date_format=
# Цвет и прозрачность фона скринсейвера. Сделать черным и не прозрачным так =#ff000000, или так =black, или любой цвет. По-умолчанию чёрный с прозрачностью 0.75.
# The color and transparency of the background of the screen saver. Make black and not transparent as = #ff000000, or so = black, or any color. By default, black with transparency 0.75.
background_color=
# Прозрачность проекции обложки альбома в Скринсейвере (в долях от 1). Ложится сверху фона (прозрачного, или черного). Чтобы убрать её совсем, поставить =0.
# Transparency projection album cover in the screensaver (in fractions of 1). It lies on top of the background (transparent or black). To remove it completely, put = 0.
cover_alpha=0.25
View attachment xposed-mtc-music-2.0.apk
Xposed-mtc-pcradio ( author MVG-V70 )
Small xposed-module to display information in a modified screensaver currently playing PC-Radio Station
View attachment xposed-mtc-pcradio-1.0.apk
TO BE CONTINUED....
reserved
reserved
In Xposed-mtc-radio mtc-radio.ini. catalog name should be mtc-radio, not mts-radio
Hey,
I really love your work Malaysk
Did anyone figured out a way to let AF work properly?
As Xposed module or sth like that.
Gesendet von meinem C6903 mit Tapatalk
Quick question, can i use Xposed-mtc-keys to assign actions to me back/forward keys on the steering wheel or is this only for the actually physical buttons on the radio?
New versions:
xposed-mtc-manager 1.5
mtc-keys 2.10
xposed-mtc-bt 1.3
Hi,
can anyone answer - does Xposed MTC Manager do a similar thing as XposedMTC?
I have tried to use XposedMTC to define default music player, and define the programs in mode switching, but it does not work on current ROM(s)
If Xposed MTC Manager will allow me to do these 2 things i'll give it a try.
The only thing i am worried about - i do not use the SD/GPS card as my slot is faulty, is the external SD required for Xposed MTC Manager?
Thanks
phil001 said:
Hi,
can anyone answer - does Xposed MTC Manager do a similar thing as XposedMTC?
I have tried to use XposedMTC to define default music player, and define the programs in mode switching, but it does not work on current ROM(s)
If Xposed MTC Manager will allow me to do these 2 things i'll give it a try.
The only thing i am worried about - i do not use the SD/GPS card as my slot is faulty, is the external SD required for Xposed MTC Manager?
Thanks
Click to expand...
Click to collapse
It is similar but different, 1. there is no "app" to set it up so all is done by typing code in a file. 2. It really does search for the file on the GPS-card which for you is a problem
You are sure you have Xposed framework installed and activated the module? I am using XposedMTC and have the latest rom from Malaysk installed...
FordFocus2007 said:
It is similar but different, 1. there is no "app" to set it up so all is done by typing code in a file. 2. It really does search for the file on the GPS-card which for you is a problem
You are sure you have Xposed framework installed and activated the module? I am using XposedMTC and have the latest rom from Malaysk installed...
Click to expand...
Click to collapse
Ok thanks for the info.
Yep. Pretty sure I have done everything correctly.
If you take a look in the XposedMTC thread, the author has said there are some problems whn using with the 'fuse' ROMs (I'm using booroondook ROM ) and he has some work to do on it.
Cheers
phil001 said:
Ok thanks for the info.
Yep. Pretty sure I have done everything correctly.
If you take a look in the XposedMTC thread, the author has said there are some problems whn using with the 'fuse' ROMs (I'm using booroondook ROM ) and he has some work to do on it.
Cheers
Click to expand...
Click to collapse
I already asked Malaysk about this issue with XposedMTC Mode switch. He is aware (of bug and lack of dev support to fix it) and probably will drop it for MTCManager. Look few pages back.
MTCManager is supposedly working and should have new UI list of apps for Mode:
http://4pda.ru/forum/index.php?showtopic=704299&st=0#entry44422580
Hi all.....
I've got a Rooted HU 4.4.4 KK RK3188 1024x600, with original ROM inside......Xposed FW is installed (2.7).
Yesterday, i installed MTC-manager and MTC-keys, and enabled them in Xposed FW......well.....
But now, i'm stopped because i wasn't abble to find the files with Root explorer, or with Package viewer.......
Can someone give me way to find them?
Thank's a lot..
SKOLS
Hi,
can someone tell me where exactly the mtc-radio.ini has to be?
I tried almost every place intern and extern storage but nothing worked for me.
Thanks
vrs8 said:
Hi,
can someone tell me where exactly the mtc-radio.ini has to be?
I tried almost every place intern and extern storage but nothing worked for me.
Thanks
Click to expand...
Click to collapse
Wait here or look for at 4pda.ru new version 1.3 which has UI for editing station list. It saves data into Android standard data folders and you don't need to poke with .ini anymore
Thank you very much!
edit: can somebody upload it here or send it per pn, cause i cant register to 4pda
vrs8 said:
Thank you very much!
edit: can somebody upload it here or send it per pn, cause i cant register to 4pda
Click to expand...
Click to collapse
Not sure if @pa.ko is right about the new way of setting up ( dont use this and have not tested )
I use google translate on 4pda.ru
Here is the new xposed radio app
Also new mtc keys and a possible fix for weather ( going to test tomorrow, 0.40 here time to sleep) xposed kld launcher. if i read correct you can set whatever you like on the homescreen...
MVG-V70 posted a new feature for Xposed
For now only for the KLD launcher ( both the Booroondook version as the standard ), maybe he will find a way to do the same for the HA ( JY ) launcher
It moves the hardcoded widgets to the last page, so you can place your own widgets on the first page
Bluetooth app: contacts not found from the list
The character check is a little bit problematic in bluetooth app.
>Replacing the standard search the contact name for a phone number in the address book of an incoming / outgoing call.
>Search on the following algorithm:
>of contact numbers it is released for all symbols except numbers;
>taken last 10 characters;
I save my numbers in international mode "+1 40 1234567" in contact list. My operator send incoming call in domestic mode "040 1234567". By checking 10 digits this application do not find any of my contacts due to they do not match. Can the application be changed to check only 9 characters?
New versions:
xposed-mtc-bt 1.5
mtc-keys 2.13
xposed-mtc-radio 1.4
Mtcb-kgl4-rk30sdk
Hello,
I have installed MTCB-KGL4-V2.53.rar for my device RK30SDK and it works great but I have some issues:
1. Ducking function for dimming the music while the gps app gives directions doesn't work;
2. Stock music player does not have a shuffle button for playlist and a wide playlist to see all "artist - melody" description.
3. Can't find any setting for auto dimming brightness.
So what modules should I install for these 3 issues to correct them. Pls help.
Anyone have an idea why mtc-keys works only after the first reboot, and stops working on subsequent boots?
Only reinstalling gets it to work again.
Settings: APK installed from /system/apps with 644. Config file is located correctly and encoded properly. Enabled in Xposed. Possible problem: I'm currently using the Startup Builder script; is mtc-keys not getting launched on boot because of this?
mtc-keys.ini UTF-8-BOM
command_23=am start -n "com.maxmpz.audioplayer/.EqActivity"
command_59=input keyevent 19
command_58=input keyevent 20
command_69=am start -a "com.maxmpz.audioplayer.ACTION_SHOW_LIST" -d "content://com.maxmpz.audioplayer.data/artists"
command_4=input keyevent 85
action_2=menu
I also can't seem to get any keyevent or events lines to work. Strangely the shell commands are the most reliable.
(This is my very first time posting on XDA.)
Hey, I just want to share how I was able to get a better FPS gaming experience with this phone (OPN200) and specifically CODM, but this will work with any other FPS games.
NOTE: I'm on Stock Oxygen OS Android 12, Rooted and with Magisk Manager installed.
First, so there's a bit of a touchscreen delay with this phone, and to solve that, after trying many Touchscreen Improvement Magisk Module's, I was able to find one that works. (attached file below)
Next, so on this phone you're unable to choose "Ultra (MP Only)" frame rate on CODM, only "MAX" frame rate (which is not 90fps)...so to solve that I found out about "GODSPEED UNLOCKER" and it basically unlocks that 90fps option for this 90hz screen. (attached file below)
Last, for performance I just turn on "High Performance Mode" located in Settings -> Battery -> Advanced...There's other ways for better performance but I just do that.
NOTE: The "GODSPEED UNLOCKER" also has other games listed when flashing the module in Magisk, that can unlock the highest Frame Rate, just choose which game that you want to apply it to. (Volume Up to select, Volume Down to confirm.)
NOTE: If on stock OOS 12, the game tools in the "Games" app for oneplus now has a "Touch Sensitivity" and "Swipe Sensitivity" feature. (Nov 14 update.)
There's my guide, ask or let me know anything.
Nice find! Noticing a big difference in navigation on Lineage OS 19.1 here and slight difference (still noticeable) on typing
squirms00 said:
First, so there's a bit of a touchscreen delay with this phone, and to solve that, after trying many Touchscreen Improvement Magisk Module's, I was able to find one that works. (attached file below)
Click to expand...
Click to collapse
Where did you find the power touch module?
This is what the module sets
/common/system.prop
Code:
# This file will be read by resetprop
# Example: Change dpi
# ro.sf.lcd_density=320
# power-berry-touch
# TOUCH
view.touch_slop=0
touch.pressure.calibration=amplitude
touch pressure.calibration=100
touch.size.calibration=diameter
touch.size.scale=0
touch.size.bias=0
touch.size.isSummed=0
touch.pressure.scale=0
touch.distance.calibration=scaled
touch.distance.scale=0
# MultiTouch
MultitouchMinDistance=1px
MultitouchSettleInterval=0ms
TapInterval=0ms
TapSlop=1px
# Better Scrolling
windowsmgr.max_events_per_sec=250
view.scroll_friction=0
ro.min_pointer_dur=8
touch.deviceType=touchScreen
# Fast Response
debug.egl.hw=1
video.accelerate.hw=1
view.touch_slop=1
view.scroll_friction=0
ro.max.fling_velocity=20000
ro.min.fling_velocity=8000
# Dexopt
pm.dexopt.bg-dexopt=speed-profile
pm.dexopt.shared=speed
# Fifo
sys.use_fifo_ui=1
# power-berry-touch
Minimal battery life impact too. Was expecting worse almost, but nope! Rock on ..
blueberry.sky said:
Where did you find the power touch module?
This is what the module sets
/common/system.prop
Code:
# This file will be read by resetprop
# Example: Change dpi
# ro.sf.lcd_density=320
# power-berry-touch
# TOUCH
view.touch_slop=0
touch.pressure.calibration=amplitude
touch pressure.calibration=100
touch.size.calibration=diameter
touch.size.scale=0
touch.size.bias=0
touch.size.isSummed=0
touch.pressure.scale=0
touch.distance.calibration=scaled
touch.distance.scale=0
# MultiTouch
MultitouchMinDistance=1px
MultitouchSettleInterval=0ms
TapInterval=0ms
TapSlop=1px
# Better Scrolling
windowsmgr.max_events_per_sec=250
view.scroll_friction=0
ro.min_pointer_dur=8
touch.deviceType=touchScreen
# Fast Response
debug.egl.hw=1
video.accelerate.hw=1
view.touch_slop=1
view.scroll_friction=0
ro.max.fling_velocity=20000
ro.min.fling_velocity=8000
# Dexopt
pm.dexopt.bg-dexopt=speed-profile
pm.dexopt.shared=speed
# Fifo
sys.use_fifo_ui=1
# power-berry-touch
Click to expand...
Click to collapse
That's what I was wondering too. Did they find it or make it. I mean reguardless, either or, stupid-nice thing to have. My vibration for typing creates a placebo effect but can def notice in swiping and navigation. Might even turn off vibe feedback and turn the typing vol up. Kinda weird having it silent, so ..
One of my favorite modules now, though. Awesome !!
Could you explain his the framerate unlocked module unlocks the frame rate? I want to know how before flashing it.