Related
Hi guys, I'm trying to install xposed but using the latest version doesn't seem to work. It successfully installs in recovery but then, once in Android, it says it's not yet compatible. I've seen lot of you have installed and managed to have it working. Could you please tell me which version you used? And how you installed it. Thanks
What ROM are u on?
http://bit.ly/2b6tR8R
Check out this post
Pphish20 said:
What ROM are u on?
Click to expand...
Click to collapse
Rooted stock 10d
[email protected] said:
http://bit.ly/2b6tR8R
Check out this post
Click to expand...
Click to collapse
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
SpH1nX said:
Thank you. Just a question. Will it be compatible with official systemless version once it's out?
Click to expand...
Click to collapse
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
gwolfu said:
systemless version is not under official development by rovo89
basically, another dev (topjohnwu) is developing it from official sources
maybe in the future rovo89 will provide some tests builds, but that is simply up to him
so short answer, it might be compatible, but no promises
however, current unofficial version is compatible (if you test), but some xposed modules are not fully developed under systemless root
Click to expand...
Click to collapse
rovo89 officially stated that the next version will be systemless
Regarding installer, have I to mandatory use material design version or I can stay with the official one? Is it compatible?
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
danroger said:
witch version of xposed are you downloading? you are supposed to download "xposed-v86-sdk23-arm64.zip"
Click to expand...
Click to collapse
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
SpH1nX said:
That's the one I'm using. It installs fine with TWRP but once I'm back in android the installer says it's not supported. I don't know if it doesn't see it installed at all
Click to expand...
Click to collapse
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
gwolfu said:
use xposed app by DVDandroid
is a material version of the app compiled from official sources, and heck, a lot better and more visual appealing than the original app. also quite good support
original thread: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
download link: http://forum.xda-developers.com/devdb/project/dl/?id=19668&task=get
Click to expand...
Click to collapse
Official zip with material design version? Does it work?
SpH1nX said:
Official zip with material design version? Does it work?
Click to expand...
Click to collapse
using it since more then half a year already, so rest assures it's working
check thread I submitted for more info in case of doubts
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
[email protected] said:
Everything is linked, Xposed, SuperSU, magisk. It depends on the version you use, in my case I SuperSU 2.76 systemless, magisk, and 86.3 Xposed systemless by topjohnwu, and great time. I leave the link:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Click to expand...
Click to collapse
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
SpH1nX said:
I'm not doubting of you guys, you're here to help me and I appreciate that. It's just that I'd like to remain as official as possible. How can an app with a different UI work where the original, official, does not?
Click to expand...
Click to collapse
Just try it
A friend of mine also ran into some issues like yours on the official app but as with your case he tried the material one and worked wonders
Also if you run the material version you are also as close to stock as possible since this is compiled from official sources but only a few visual changes made to the app
Dont work at mine H850
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
Could you please tell framework and installer versions?
oOFrAnzOo said:
Dont work at mine H850
Click to expand...
Click to collapse
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
gwolfu said:
in xposed app, navigate to official tab, and click install/update button
choose ok and reboot to recovery (TWRP) and let it install and reboot
as soon as reboot is done, xposed should work
Click to expand...
Click to collapse
Done. Get System UI Force Close every Time.
SpH1nX said:
Could you please tell framework and installer versions?
Click to expand...
Click to collapse
Latest Material Installer and Systemless v86.3 and v86.4.
Tried official v86 too
I can confirm that official framework works fine with material design installer. That's the only combination that's working on my G5. Haven't tried systemless version.
SBXposed bypasses the Xposed restriction in the Sparkasse(+) App.
Requirements
- Xposed Framework
- Sparkasse / Sparkasse+ app at least version 3.0.0
- Android 4.4+
Usage
1. Install SBXposed
2. Activate module in XposedInstaller
3. Reboot
4. Have fun with unblocked app.
Download
You can download the mod via XposedInstaller or directly from Repository: repo.xposed.info/module/tmh.sbxposed
Github: https://github.com/tmhzxy/SBXposed
Support
The module was tested by me on latest CM13 nightly for the latest version of the app. It should be working fine on other ROMs.
Please leave feedback with an Xposed log and the apk from Sparkasse(+) app if not working, so I can take a look at it.
I will not add any new features. This module is only for skipping the Xposed / partial root restriction.
Changelog
1.0: Initial module.
1.1: Fix min. XposedBridge version to 53 for Kitkat.
Works like a charm on Sultans latest cm13 (op3) with xposed and Sparkasse+! Thank you very much!
Works pefectly. I knew this Module would come. Like i statet in my Playstore Review. Thank you very much.
I can run the Sparkasse+ app v3.0.0 without this module. And I have Xposed installed, of course. Why do you need it?
Won't work for me
Hi there,
is there any possibilty for me to activate this app under xposed v.2.6.1? The module keeps telling my xposed is too old (though there are no updates available for me).
Galaxy Note 4, Stock 4.4.4
meiser said:
I can run the Sparkasse+ app v3.0.0 without this module. And I have Xposed installed, of course. Why do you need it?
Click to expand...
Click to collapse
Meanwhile, Xposed detection is installed. Unfortunately, the detection works at most, so I created the module. If this is not the case, your setup would interest me.
Musikologin said:
Hi there,
is there any possibilty for me to activate this gem under xposed v.2.6.1? The module keeps telling my xposed is too old (though there are no updates available for me).
Galaxy Note 4, Vanilla 4.4.4
Click to expand...
Click to collapse
New version published. Should work now.
Thank you! Works great!
@tmh_: Dude i love you ?
Sent from my LG-D855 using XDA Labs
tmh_ said:
Meanwhile, Xposed detection is installed. Unfortunately, the detection works at most, so I created the module. If this is not the case, your setup would interest me.
Click to expand...
Click to collapse
I'm running CM 13.0 nightly (latest version from 2016/11/07) on a OnePlus3, I installed SuperSU 2.78 SR5, suhide 0.55 and seamless Xposed 86.1 by romracer.
tmh_;69867331
New version published. Should work now.[/QUOTE said:
Thank you for your quick update! Unfortunately it still won't work - module is installed and activated via xposed, but after a reboot my sparkasse app (which I have uninstalled and reinstalled again) still thinks I'm a dangerous criminal or whatever... still detects my installed xposed framework.
(BTW cloak root module wouldn't work either.)
Maybe I will just stick with version 2.9.1 as long as possible.
Update: I tried same thing with my daughter's z1 compact running CM11. It doesn't work here either - so it has probably something to do with kitkat roms, no matter if stock or custom.
I'm too old fashioned, can't say goodbye to kitkat...
Click to expand...
Click to collapse
Musikologin said:
tmh_;69867331
New version published. Should work now.[/QUOTE said:
Thank you for your quick update! Unfortunately it still won't work - module is installed and activated via xposed, but after a reboot my sparkasse app (which I have uninstalled and reinstalled again) still thinks I'm a dangerous criminal or whatever... still detects my installed xposed framework.
(BTW cloak root module wouldn't work either.)
Maybe I will just stick with version 2.9.1 as long as possible.
Click to expand...
Click to collapse
I need the Xposed log to understand the error.
Click to expand...
Click to collapse
tmh_ said:
I need the Xposed log to understand the error.
Click to expand...
Click to collapse
Sure, it says:
SBXposed: Try to find protect classes...
SBXposed: 1 classes found
Nothing more I can find related to this module.
Musikologin said:
Sure, it says:
SBXposed: Try to find protect classes...
SBXposed: 1 classes found
Nothing more I can find related to this module.
Click to expand...
Click to collapse
I have built a version in which more things are logged. This logging is explicit only for Android <5.0 and only for debugging, as this is a performance loss.
After testing app, I need the complete Xposed log.
tmh_ said:
I have built a version in which more things are logged. This logging is explicit only for Android <5.0 and only for debugging, as this is a performance loss.
After testing app, I need the complete Xposed log.
Click to expand...
Click to collapse
I really appreciate your effort!
My request now is somewhat embarrassing *cough*:
How exactly do I extract an apk file from the attached zip?
After unzipping all I I get is a bunch of folders and for me rather uncommon file types.
Musikologin said:
I really appreciate your effort!
My request now is somewhat embarrassing *cough*:
How exactly do I extract an apk file from the attached zip?
After unzipping all I I get is a bunch of folders and for me rather uncommon file types.
Click to expand...
Click to collapse
The attachment is the apk. Sometimes the apk may be opened by a program as a zip file.
tmh_ said:
The attachment is the apk. Sometimes the apk may be opened by a program as a zip file.
Click to expand...
Click to collapse
Although it's named apk, it's only shown as a zip file after the download. On my Windows device as well as on my smartphones. I can only flash zips on my phone but that's probably not the way it should work.
Edit: The download via QR worked. I will test it and tell you. Tomorrow. Short baby night ahead .
Thank you!
Thanks man, works flawlessly on my Note 4 with 6.0.1
Thanks, i first used my old sparkasse app from titanium backup until i saw this modul.
Works as expected, thanks for your work.
Works as expected. Great! And thanks [emoji122] [emoji122] [emoji122]
Sent from my XT1562 using XDA-Developers mobile app
Thank you for sharing the module, works just fine. I don't understand how Sparkasse can block everyone out using Xposed...
There seems to be a few different versions of xposed for nougat currently available. Lets use this thread to discuss what works and doesnt work for our device.
My setup
ROM: Nitrogen
XPOSED: https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Modules: minminguard, youtube adaway
works/doesnt work: so far both modules appear to be working. i have had a few app FC on reboot but nothing significant
Rovo says don't touch it.
https://github.com/rovo89/Xposed/issues/230?_utm_source=1-2-2#issuecomment-316623920
Face_Plant said:
Rovo says don't touch it.
https://github.com/rovo89/Xposed/issues/230?_utm_source=1-2-2#issuecomment-316623920
Click to expand...
Click to collapse
Was about to post a link to the same discussion.
nomisunrider said:
Was about to post a link to the same discussion.
Click to expand...
Click to collapse
Great minds think alike.
Haven't really missed Xposed on Nougat. Can't think of anything I used Xposed for that I'm not getting with current ROM (Screw'd) and Magisk modules.
Sent from my Nexus 6P using Tapatalk
I was preparing to switch to another ROM with a clean flash in mind so I decided to try this on my 6P running July security, RR ROM, Franco Kernel, and Magisk - even though it's not compatible with our device. Flash succeeded and device booted but immediately after a plethora of apps crashed. I was able to open the manager app and browse through the list of available modules but clicking on download yielded a microsecond download before failing in all cases. Pretty interesting at any rate. Apk confirmed that the framework had been installed. Hopefully, this helps push xposed development forward a little bit
Yeah, same here...gave it a try and multiple app crashes. Everything was fine after running the installer. Will try again when official support for the 6P is out.
Prey521 said:
Yeah, same here...gave it a try and multiple app crashes. Everything was fine after running the installer. Will try again when official support for the 6P is out.
Click to expand...
Click to collapse
yea having the same issues after installing the framework had to restore for now...
Installed v87 and seems to be working
so far enabled adblocker, youtube adaway, and greenify modules
greenify or youtube adaway modules don't seem to be working
running RR 5.8.3 - 7/8/17
I tried a version on Pure Nexus 7.1.1. Lots of FCs, some insignificant, some critical system processes. Turned the Greenify and 3C modules. 3C worked fine, but Greenify couldn't see that it's module was active. Xposed uninstall .zip worked fine for removal and return to no FC state. Sad.
running stock 7.1.1 N4F26T
working exposed version
xposed-v88.2-sdk25-arm64
no work:
xposed-v88-sdk25-arm64
xposed-v88.1-sdk25-arm64
xposed-v89-sdk25-arm64
Sup guys! I was finally able to find time to convert my previous patch for EPM to an Xposed module! This was not as simple as I expected, as it required dynamic XML generation/integration, which can be cumbersome to say the least. I tried to keep the code as generic as possible to support other models of the A2017, but there are no guarantees beyond the US model. I did add a configurable option to add a bootloader button, but as of this posting (B32), ZTE has disabled this functionality.
FAQ:
1. Can you add support for my model?
- Possibly, but at the minimum you would need to post your framework-zte-res.apk. Specifically, the files layout/global_dialog.xml and layout-land/global_dialog.xml are needed.
2. Does this support MiFavor 5.x?
- I cannot say, it's only been tested on A2017U B32, which uses MiFavor 4.x.
Thanks to wanam for the simple settings popup and apsun for the RemotePreferences library.
Xposed page: http://repo.xposed.info/module/com.none.epm_zte
very cool that you did a "port", have my thanks - even when I'm not running stock most of the time
Works xposed in Mifavor? 4.x or 5.0?
BaamAlex said:
Works xposed in Mifavor? 4.x or 5.0?
Click to expand...
Click to collapse
Only tested on B32 thus far, which runs MiFavor 4.2.
Works on Sl!m M!Favor 5.0 / 7.1.1 v 2.0. (A2017G).
Thanks man! Your the greatest! Any chance you can add the 3minit battery mod like last time
I would love to use this, however i don't want to install Xposed since i don't want to break safetynet...is there any way you can make this a magisk module as well?
Teet1 said:
I would love to use this, however i don't want to install Xposed since i don't want to break safetynet...is there any way you can make this a magisk module as well?
Click to expand...
Click to collapse
There's an Xposed magisk module tho
Choose an username... said:
There's an Xposed magisk module tho
Click to expand...
Click to collapse
It still breaks safetynet
Teet1 said:
It still breaks safetynet
Click to expand...
Click to collapse
Yes but the Xposed Installer app has a toggle switch to temporarily disable Xposed. So whenever you need to use an app such as Android Pay just disable Xposed and and then re-enable it when you're done.
bkores said:
Yes but the Xposed Installer app has a toggle switch to temporarily disable Xposed. So whenever you need to use an app such as Android Pay just disable Xposed and and then re-enable it when you're done.
Click to expand...
Click to collapse
Not worth it if i have to reboot my phone when I want to play games that require safetynet and use banking every time oh well, can't have all the pleasures in the world, but it would be nice to have this as a magisk module.
The thing is, I don't believe it's possible since you need to replace a small part of a file, not the whole file. I don't know how the Xposed module works (or Xposed itself) but I believe it somehow replaces that small part. If there was a Magisk module you wouldn't be able to further modify the framework and it would only work for one mifavor version.
I think this was already discussed but about a flashable zip version
Edit: Yeah, the dev talks about dynamic XML generation/integration
Choose an username... said:
The thing is, I don't believe it's possible since you need to replace a small part of a file, not the whole file. I don't know how the Xposed module works (or Xposed itself) but I believe it somehow replaces that small part. If there was a Magisk module you wouldn't be able to further modify the framework and it would only work for one mifavor version.
I think this was already discussed but about a flashable zip version
Edit: Yeah, the dev talks about dynamic XML generation/integration
Click to expand...
Click to collapse
This is correct. I went with Xposed for better compatibility across multiple h/w & s/w versions. ROM authors can likely cook it into their framework using the tutorial from the other thread :good:
Ah bummer. I was hoping to use this module but I'm running v87 Xposed (PurifyOS). EPM requires v88.x. I'm only on unofficial Xposed because Unicon works with it.
If I decide I don't need Unicon I'll definitely update and use EPM.
At the moment I'm using one of the many reboot menu utilities to popup on double press of the back button (using Button Mapper).
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
jeboo said:
This is correct. I went with Xposed for better compatibility across multiple h/w & s/w versions. ROM authors can likely cook it into their framework using the tutorial from the other thread :good:
Click to expand...
Click to collapse
I can confirm that this works on stock A2017G B09 with flashable Xposed. may also work with topjohnwu's Xposed but I couldn't manage to make the modded xposed installer find the xposed installation
The ROM is stock B09, from raystef66's flashable zips
Here's a screenshot where you can barely see the model below
So basically you can add that it's compatible with G-B09 somewhere
jeboo said:
2. Does this support MiFavor 5.x?
- I cannot say, it's only been tested on A2017U B32, which uses MiFavor 4.x.
[/URL]
Click to expand...
Click to collapse
Works on MF5.0 too (either SuperSu or Magisk). Only if you use the flashable xposed framework v88.2 SDK25 + xposed installer + your apk.
Thnx ! (does not work through Magisk module installing the framework. Installer error framework not installed)
works on B35
Works on B09 Nougat on A2017G, although it does not play nice when messing with screen dpi. I am currently on 500 and icons are misaligned.
I spend the afternoon fixing @FatMinMin's awesome MinMinGuard for Zygisk!
Note that i only tested this on Android 11 running Zygisk LSposed 1.8.4 (6609) with Magisk 25.2 (25200), tho the changes shouldn't affect any existing code so if 2.1.1 or earlier works on your device (including Riru and YAHFA) so should this version.
Furthermore if you have any previous version of MinMinGuard installed you will have to uninstall it before installing this version since i had to sign it with my own key.
Now for the but(t)s
Android 11 introduced a new privacy feature preventing apps from seeing each other, which is the main reason you no longer saw the ad networks/number of blocked ads for apps enabled in MinMinGuard, that is if LSposed API 93 didn't break enabling apps in the first place...
To work around this MinMinGuard 2.2.0 will grant every enabled app android.permission.QUERY_ALL_PACKAGES which implies
a) that you hook the System Framework in LSposed Manager (should already be selected)
b) Restart the phone after enabling apps in MinMinGuard
because permission are only read when the phone/Android boots.
Blocking would work regardless, you just wouldn't see the ad network/number of blocked ads in MinMinGuard and starting enabled apps would (probably) take a bit longer because of the Content Provider timeout.
I submitted a PR with the changes to the MinMinGuard repository on Github, tho i am not sure if anybody is even still alive there:
https://github.com/chiehmin/MinMinGuard/pull/199
If you want to help getting it merged upvote the PR!
Cheers
Thank you for updating MinMinGuard. It was / is one of the best modules ever created. Really missed it. I'm giving this a shot on OOS12. Thanks again for your efforts.
Thanx for your effort! Many people would be happy to see an update to this module. Unfortunately, I'm afraid it has been abandoned by the original dev so you'd have to maintain a fork
Thanks for this! Can you fork and release it on Github?
Wow, thanks for this one, i have a question if i have lsposed do i have to enable every single app where I'd like to use this module? Or I'll be good just by enabling system framework?
defkev said:
MinMinGuard
Click to expand...
Click to collapse
Thx for the update , does it work on A10 ?
iamMG said:
Thanks for this! Can you fork and release it on Github?
Click to expand...
Click to collapse
My fork is in the PR:
GitHub - defkev/MinMinGuard: The best advertisement blocker on Android!
The best advertisement blocker on Android! Contribute to defkev/MinMinGuard development by creating an account on GitHub.
github.com
No release tho.
J0nhy said:
Wow, thanks for this one, i have a question if i have lsposed do i have to enable every single app where I'd like to use this module? Or I'll be good just by enabling system framework?
Click to expand...
Click to collapse
Yes, you have to hook every app in LSPosed Manager you want to blacklist in MinMinGuard, but that's an LSPosed thing regardless of the MinMinGuard version (legacy Xposed would blanket hook every app and it was up to the module developer to decide what apps to inject)
loopypalm said:
Thx for the update , does it work on A10 ?
Click to expand...
Click to collapse
As i said, this fix is exclusively targeting Android 11 (API30+) and newer, if v2.0.2 worked with 10 so will this version.
defkev said:
My fork is in the PR:
GitHub - defkev/MinMinGuard: The best advertisement blocker on Android!
The best advertisement blocker on Android! Contribute to defkev/MinMinGuard development by creating an account on GitHub.
github.com
No release tho.
Yes, you have to hook every app in LSPosed Manager you want to blacklist in MinMinGuard, but that's an LSPosed thing regardless of the MinMinGuard version (legacy Xposed would blanket hook every app and it was up to the module developer to decide what apps to inject)
As i said, this fix is exclusively targeting Android 11 (API30+) and newer, if v2.0.2 worked with 10 so will this version.
Click to expand...
Click to collapse
I tried it and it makes some apps crash, thanks tho
J0nhy said:
I tried it and it makes some apps crash, thanks tho
Click to expand...
Click to collapse
Impossible to tell w/o a logcat.
If this also happens with the previous version its a bug i haven't come across yet.
Could even be an LSPosed problem.
defkev said:
Impossible to tell w/o a logcat.
If this also happens with the previous version its a bug i haven't come across yet.
Could even be an LSPosed problem.
Click to expand...
Click to collapse
How can i send you a logcat?
J0nhy said:
How can i send you a logcat?
Click to expand...
Click to collapse
Use https://pastebin.com/
defkev said:
Use https://pastebin.com/
Click to expand...
Click to collapse
I have no idea how to make a logcat
LSPosed Manager -> Logs -> Verbose Log
or if this shows nothing of value
Code:
adb logcat -s tw.fatminmin.xposed.minminguard
Appears to be working on A13 with no errors yet
its working on android10 (miui11), are you planning to fix some ads that is showing.?
Thanks for the work. It's working for me with android 11.
Can anyone confirm this work on pixel 7 A13. Thank you
defkev said:
I spend the afternoon fixing @FatMinMin's awesome MinMinGuard for Zygisk!
Note that i only tested this on Android 11 running Zygisk LSposed 1.8.4 (6609) with Magisk 25.2 (25200), tho the changes shouldn't affect any existing code so if 2.1.1 or earlier works on your device (including Riru and YAHFA) so should this version.
Furthermore if you have any previous version of MinMinGuard installed you will have to uninstall it before installing this version since i had to sign it with my own key.
Now for the but(t)s
Android 11 introduced a new privacy feature preventing apps from seeing each other, which is the main reason you no longer saw the ad networks/number of blocked ads for apps enabled in MinMinGuard, that is if LSposed API 93 didn't break enabling apps in the first place...
To work around this MinMinGuard 2.2.0 will grant every enabled app android.permission.QUERY_ALL_PACKAGES which implies
a) that you hook the System Framework in LSposed Manager (should already be selected)
b) Restart the phone after enabling apps in MinMinGuard
because permission are only read when the phone/Android boots.
Blocking would work regardless, you just wouldn't see the ad network/number of blocked ads in MinMinGuard and starting enabled apps would (probably) take a bit longer because of the Content Provider timeout.
I submitted a PR with the changes to the MinMinGuard repository on Github, tho i am not sure if anybody is even still alive there:
https://github.com/chiehmin/MinMinGuard/pull/199
If you want to help getting it merged upvote the PR!
Cheers
Click to expand...
Click to collapse
This is working on A13 Picel 6 Pro. Wow. Thank you for sharing!
The app installed good but it's not finding hosts in the selected apps so not working yet
Just tried it in Lineage 20 with Magisk 25.0 and LSposed v1.8.6 6712 zygisk and alas, all ads are getting trough there.